Answer:
Digestive system
Explanation:
ulcer affect anywhere in the digestive system
Digestive system.
Since the acids in your food break down with the chemicals in your stomach, it can give you heartburn and also, ulcer disease happens in your stomach so the only correct answer would be Digestive System. I would like to say that the person with the profile name BigPapa who commented on my answer deserves a lot of credit, and thanks if you see this.
-R3TR0 Z3R0
The sides of a right triangle that has any given vector for the hypotenuse are called _____
A. Scalar
B. Component
C. Resultant
D. Vector
Answer:
They are the resultant vector.
39. What is the change in momentum for a 5,000 kg ship in
outer space that experiences no net force over a 1 hr
period?
Answer:
Change in momentum is zero.
Explanation:
The following data were obtained from the question:
Mass (m) = 5000 kg
Time (t) = 1 h
Net force (F) = 0
Change in momentum =?
Force = Rate of change of momentum
0 = change in momentum
Change in momentum = 0
We can see from the above illustration that the net force is zero. Thus, the change in momentum is also zero.
Stored energy due to vertical position is known as
Elastic Potential energy
Vibrational energy
Kinetic energy
O Gravitational Potential energy
1
2
3
4
5
Answer: gravitational potential energy
Explanation:
Given that Carbon-14 has a half-life of 5700 years, determine how long it would take for
this reduction to occur.
Answer:It will take about 3000 years
Explanation:
how many pennies can 4 folds of a paper hold?
A particle move in the xy plane so that its position vector r=bcosQi +bsinQj+ ctk, where b, Q and c are constants. show that the partial move with constant speed.
Answer:
The speed of this particle is constantly [tex]c[/tex].
Explanation:
Position vector of this particle at time [tex]t[/tex]:
[tex]\displaystyle \mathbf{r}(t) = b\, \cos(Q)\, \mathbf{i} + b\, \sin(Q) \, \mathbf{j} + c\, t\, \mathbf{k}[/tex].
Write [tex]\mathbf{r}(t)[/tex] as a column vector to distinguish between the components:
[tex]\mathbf{r}(t) = \begin{bmatrix}b\, \cos(Q) \\ b\, \sin(Q) \\ c\, t\end{bmatrix}[/tex].
Both [tex]b[/tex] and [tex]Q[/tex] are constants. Therefore, [tex]b\, \cos(Q)[/tex] and [tex]b \sin (Q)[/tex] would also be constants with respect to [tex]t[/tex]. Hence, [tex]\displaystyle \frac{d}{dt}[b\, \cos(Q)] = 0[/tex] and [tex]\displaystyle \frac{d}{dt}[b\, \sin(Q)] = 0[/tex].
Differentiate [tex]\mathbf{r}(t)[/tex] (component-wise) with respect to time [tex]t[/tex] to find the velocity vector of this particle at time [tex]t\![/tex]:
[tex]\begin{aligned}\mathbf{v}(t) &= \frac{\rm d}{{\rm d} t} [\mathbf{r}(t)] \\ &=\frac{\rm d}{{\rm d} t} \left(\begin{bmatrix}b\, \cos(Q) \\ b\, \sin(Q) \\ c\, t\end{bmatrix}\right) \\ &= \begin{bmatrix}\displaystyle \frac{d}{dt}[b\, \cos(Q)] \\[0.5em] \displaystyle \frac{d}{dt}[b\, \sin(Q)]\\[0.5em]\displaystyle \frac{d}{dt}[c \cdot t]\end{bmatrix} = \begin{bmatrix}0 \\ 0 \\ c\end{bmatrix}\end{aligned}[/tex].
The speed [tex]v[/tex] (a scalar) of a particle is the magnitude of its velocity :
[tex]\begin{aligned}v(t) &= \| \mathbf{v}(t) \| \\ &= \left\|\begin{bmatrix}0 \\ 0 \\ c\end{bmatrix}\right\| \\ &= \sqrt{0^2 + 0^2 + c^2} = c\end{aligned}[/tex].
Therefore, the speed of this particle is constantly [tex]c[/tex] (a constant.)
Common transparent tape becomes charged when pulled from a dispenser. If one piece is placed above another, the repulsive force can be great enough to support the top piece's weight. Assuming equal point charges (only an approximation), calculate the magnitude of the charge if electrostatic force is great enough to support the weight of a 12.0 mg piece of tape held 0.55 cm above another. (The magnitude of this charge is consistent with what is typical of static electricity.)
Answer:
q = 2 10⁻⁸ C
Explanation:
For this exercise we use the translational equilibrium equation
F_e -A =
F_e = W
the electric force is given by Coulomb's law
F_e = [tex]k \frac{q_1q_2}{r^2}[/tex]
in this case they indicate that the loads on the tapes are equal
F_e = k q² / r²
we substitute
k q² / r² = m g
q = [tex]\sqrt{ \frac{mg r^2}{k} }[/tex]
calculate
q = [tex]\sqrt { \frac{ 12 \ 10^{-3} \ 9.8 (0.55 \ 10^{-2})^2 }{9 \ 10^9} }[/tex]
q = [tex]\sqrt{ 3.9526 \ 10^{-16}[/tex]
q = 1,999 10⁻⁸ C
q = 2 10⁻⁸ C
A rocket, with a mass of 5100 kg, has an engine that provides a net upward force of 8.0 x 10^5 N. It starts from rest and reaches a maximum speed of 900 m/s. How long does it take to reach that maximum velocity?
Answer:
5.7375 seconds
Explanation:
The computation of the time required to reach that maximum velocity is shown below:
Given that
Mass = m = 5100 kg
Net upward force F = 8 × times 10^5 N
Initial speed = V_i = 0
Maximum speed = V = 900 m.s
Based on the above information
Impluse J = m(V - V_i)
= 5100 (900 - 0)
= 459 × 10^4 kg m.s
As we know that
J = FT
So
T = J ÷ F
= (459 × 10^4) ÷ (8 × 10^5)
= 5.7375 seconds
A 450.0 kg roller coaster is traveling in a circle with radius 15.0m. Its speed at point A is 28.0m/s and its speed at point B is 14.0 m/s. At point A the cart is already moving with circular motion. a) Draw free bodydiagramsfor the cartatpointsAand B(two separate free body diagrams). b) Calculate the acceleration of the cartat pointsAandB(magnitude and direction). c) Calculate the magnitude of the normal force exerted by the trackson the cartat point A. d) Calculate the magnitude of the normal force exerted by the tracks on the cart at point B.
Answer:
b) a = 52.26 m / s², a ’= 13.06 m / s², c) N = 2.79 10⁴ N, d) N = 1.89 10³ N
Explanation:
a) In the attached we can see the free body diagrams for the two positions, position A in the lower part of the circle and position B in the upper part of the circle
b) Let's start at point A
Let's use that the acceleration is centripetal
a = v² / r
let's calculate
a = 28² / 15.0
a = 52.26 m / s²
as they relate it is centripetal it is directed towards the center of the circle, therefore for this point it is directed vertically upwards
Point B
a ’= 142/15
a ’= 13.06 m / s²
in this case the acceleration is vertical downwards
c) The values of the normal force
point A
let's use Newton's second law
∑ F = m a
N- W = m a
N = mg + ma
N = m (g + a)
N = 450.0 (9.8 + 52.25)
N = 2.79 10⁴ N
d) Point B
-N -W = m (-a)
N = ma -m g
N = m (a-g)
N = 450.0 (14.0 - 9.8)
N = 1.89 10³ N
Two identical conducting spheres are placed with their centers 0.30 m apart. One is given a charge of 12 X10^-9 C and the other is given a charge of -18 X 10^-9 C. a. Find the electric force exerted on one sphere by the other. b. The sphere are connected by a conducting wire. After equilibrium has occurred, find the electric force between the two spheres.
Answer:
Explanation:
Force between two charged conducting sphere
= k x Q₁ x Q₂ / r² , k is a constant Q₁ and Q₂ are charges and r is distance between them .
= 9 x 10⁹ x 12 x 10⁻⁹ x 18 x 10⁻⁹ / .30²
= 21600 x 10⁻⁹
= 2.16 x 10⁻⁵ N .
b )
After the spheres are joined together , there is redistribution of charge and remaining charge will be equally shared by them .
Charge on each sphere = (12 - 18 ) x 10⁻⁹ / 2
= - 3 x 10⁻⁹ C .
Force = 9 x 10⁹ x 3 x 10⁻⁹ x 3 x 10⁻⁹ / .30²
= 900 x 10⁻⁹ N .
A fan has four identical, symmetrically placed blades. The blades are rotating clockwise at twenty revolutions per second.
A) What is the smallest time interval between stroboscope flashes that will make the fan blades appear motionless?
B) What is the highest frequency (in flashes per second) at which a stroboscope will make the
fan blades appear to stand still? Show your calculation.
C) The same questions as (a) and (b), but someone has put a yellow dot on one blade, and now you want the yellow dot to appear to be standing still. Explain, and show your calculation.
D) Now the stroboscope is set for nineteen flashes per second, and the yellow dot appears to be slowly rotating. Which direction does it appear to rotate, clockwise or counterclockwise? Explain, and show your calculation.
E) The same as (d), but the stroboscope is set for twenty-one flashes per second. Explain, and show your calculation.
Answer:
A) t = 1.249 10⁻² s, B) f = 80 Hz, C) f = 20 Hz,
D) slowly advancing an angle of approximately Δθ = 0.05 rad each flash
E) In each flash it seems to go backward an angle of Δθ = -0.05 rad
Explanation:
A) To make it appear that the blades are immobile, it implies that every time the light turns on, a blade should be in the same position, therefore, as we have 4 blades, they must rotate an angle of 2π/4,
θ = π / 2
θ = 1.57 rad
taking the angle let's use the endowment kinematics relations
θ = w₀ t + ½ α t²
in general the fans rotate at constant speed α= 0
θ = w₀ t
t = θ / w₀
let's reduce the magnitudes to the SI system
w₀ = 20 rev / s (2π rad / 1rev) = 125.66 rad / s
let's calculate
t = 1.57 / 125.66
t = 1.249 10⁻² s
B) the fastest speed for the blades to rotate is when one blade of a complete turn , we use the relationship between the fecuance and the period
f = 1 / T
f = 1 / 1.25 10⁻²
f = 80 Hz
C) we have two possibilities:
* a yellow dot is placed on each sheet
In this case the angular velocity of the blade is the same at all points, therefore the results obtained should not change
* a yellow dot is placed on a single sheet.
Here for the point to remain fixed the angle of rotation must be
θ= 2π rad
the time is
t = 2π / 125.66
t = 5 10⁻² s
the maximum frequency is
f = 1/5 10⁻²
f = 20 Hz
D) The copy strobe rotates at f = 19 Hz, the time between each flash is
t = 1/19
t = 5.26 10⁻² s
this time is higher, so the angle turned is large
θ = w t
θ = 125.66 5.26 10⁻²
θ = 6.61 rad
the relationship between this angle and the angle of a circle is
θ = 1,052
We can see that it is this time the blade rotates 1 complete turns, for this the position of the blade changes us, for the other 0.052 rad the blade rotates a little more than the circumference therefore it seems that it is slowly advancing an angle of approximately
Δθ = 0.05 rad each flash
E) in this case changes the flash speed
t = 1/21
t = 4.76 10⁻² s
the angle rotated is
θ = 125.66 4.76 10⁻²
θ = 5.984 rad
θ / 2π = 0.95
in that case, the blade did not complete the turn, therefore in each flash it seems to go backward an angle
Δθ = -0.05 rad
If you have a 0.125 kg lead piece at
20.0°C, how much heat must you
add to melt it? (Remember, you
must warm it to its melting point
first.)
Material
Lead
Melt Pt (°C)
327
L (1/kg)
2.32.104
Boil Pt (°C) Lv (1/kg)
1750 8.59.105
c (1/(kg*c)
128
(Unit = J)
Answer:
7,812 J
Explanation:
Using the relation:
Q = mcΔθ
Q = quantity of heat
C = specific heat capacity of lead
Δθ = temperature change (T2 - T1)
M = mass of substance
Q = mass * specific heat * Δθ
Q = 0.125kg * 128 * (327 – 20)
Q = 0.125 * 128 * 307
Q = 4912 J
For melting:
Q = mass * Hf
0.125 * (2.32 * 10^4)
= 2,900 J
Total = 4,912 J + 2,900 J = 7,812 J
A baseball is thrown horizontally from a cliff at 30 m/s and lands 7 seconds after the baseball was thrown. Calculate the horizontal AND vertical distance.
Answer:
The horizontal and vertical distances are x = 210 m and y = -240.35 m, respectively.
Explanation:
Using the equation of the displacement in the x-direction, we have:
(let's recall we have a constant velocity in this direction)
[tex]x=v_{ix}t[/tex]
Where:
v(ix) is the initil velocity in the x direction (v(ix) = 30 m/s)t is the time (t = 7 s)[tex]x=30(7)[/tex]
[tex]x=210\: m[/tex]
Now, we need to use the equation of the displacement in the y-direction to find the vertical distance. Here we have an acceleration (g)
[tex]y=v_{iy}t-\frac{1}{2}gt^2[/tex]
Where:
v(iy) is the initial velocity at the y-direction. In this case, it will be 0t is the timeg is the acceleration of gravity (g=9.81 m/s²)Then, the vertical position at 7 s is:
[tex]y=-\frac{1}{2}(9.81)(7)^2[/tex]
[tex]y=-240.35\: m[/tex]
Therefore, the horizontal and vertical distances are x = 210 m and y = -240.35 m, respectively. The minus sign means the negative value in the y-direction.
I hope it helps you!
TWO forces, one of 12N and another or 24N
act on body in such a way that they make an angle of 90° with each other. Find the resaltant of two forces.
Answer:
26.833 N
Explanation:
The computation of the resaltant of two forces is shown below:
Given that
Force A = 12N
Force B = 24N
Based on the above information
Resultant R is
[tex]=\sqrt{A^2 + B^2 + 2AB \times cos \theta}\\\\=\sqrt{144 + 576 + 2\times 24\times 12\times cos90^{\circ}}\\\\=\sqrt{144+576+576\times 0}\\\\=\sqrt{720}[/tex]
=26.833 N
QUCIK!! SOMEONE PLEASE HELP! I’LL MARK BRAINLIEST!!
Answer:
A. v = √2gh
B. No! The final velocity does not depend on the mass of the car.
C. Yes! the final velocity depends on the steepness of the hill
D. 3.28 m/s
Explanation:
A. Determination of the final velocity.
½mv² = mgh
Cancel out m
½v² = gh
Cross multiply
v² = 2gh
Take the square root of both side
v = √2gh
B. Considering the formula obtained for the final velocity i.e
v = √2gh
We can see that there is no mass (m) in the formula.
Thus, the final velocity does not depend on the mass of the car.
C. Considering the formula obtained for the final velocity i.e
v = √2gh
We can see that there is height (h) in the formula.
Thus, the final velocity depends on the steepness of the hill
D. Determination of the final velocity.
Height (h) = 0.55 m
Acceleration due to gravity (g) = 9.8 m/s²
Velocity (v) =?
v = √2gh
v = √(2 × 9.8 × 0.55)
v = √10.78
v = 3.28 m/s
your "A" never changes, while your "Y" changes depending on strength of gravity. is it mass or weight?
Answer:
A - mass. B - Weight
Explanation:
This is because weight varies with the strength of gravity. Mass is just the amount of matter in an object
Please help 25 points!
Three waves with frequencies of 1 Hertz (Hz), 3 Hz, and 9Hz travel at the same speed. Which of the following statements is correct?
A. The 1 Hz wave contains the most energy.
B. The crests of all three waves are of equal height.
C. The wavelength of the 9Hz wave is three times that of the 3 Hz wave.
D. The 1 Hz wave has the longest wavelength.
Answer:
B
Explanation:
The crest of all three waves are of equal height
A student is conducting an experiment to compare the resistivity of two unknown materials by using two wires, each made of one of the materials and each connected in a circuit. The student measures the potential difference across and current in the wires. What must be the same to be able to compare the resistivities using just the potential difference and current measurements?
Answer:
is there a. b. c or d?
Explanation:
Flying insects such as bees may accumulate a small positive electric charge as they fly. In one experiment, the mean electric charge of 50 bees was measured to be +(30±5)pC+(30±5)pC per bee. Researchers also observed the electrical properties of a plant consisting of a flower atop a long stem. The charge on the stem was measured as a positively charged bee approached, landed, and flew away. Plants are normally electrically neutral, so the measured net electric charge on the stem was zero when the bee was very far away. As the bee approached the flower, a small net positive charge was detected in the stem, even before the bee landed. Once the bee landed, the whole plant became positively charged, and this positive charge remained on the plant after the bee flew away. By creating artificial flowers with various charge values, experimenters found that bees can distinguish between charged and uncharged flowers and may use the positive electric charge left by a previous bee as a cue indicating whether a plant has already been visited (in which case, little pollen may remain). What is the best explanation for the observation that the electric charge on the stem became positive as the charged bee approached (before it landed)?
(a) Because air is a good conductor, the positive charge on the bee’s surface flowed through the air from bee to plant.
(b) Because the earth is a reservoir of large amounts of charge, positive ions were drawn up the stem from the ground toward the charged bee.
(c) The plant became electrically polarized as the charged bee approached.
(d) Bees that had visited the plant earlier deposited a positive charge on the stem.
Answer:
a) True
Explanation:
There are several possible explanations for this positive charge
* The explanation of the small positive charge in the plant when the bee approaches is like a defense system of the plants,
to prevent the bees from taking the pollen, but the flowers need the bees to transport the pollen for fertilization, so this possibility is not correct
* The air is conductive so the bee indexes a charge in the nearby air, this charge must be negative and this charge induced in the air induces a charge on the flower that must be positive.
When reviewing the different statements we have
a) True, it agrees with the second explanation of the phenomenon
b) False. The earth is a deposit of negative charge
c) false. If this is the case the charge should be negative
d) False. This residual charge from the other bees is quickly neutralized by the charge from the Earth.
Answer:
Explanation:
.
A ball is thrown straight up into the air. Which of the following best describes the energy present at various stages?
There is more energy at the top of the ball's path than there is at the bottom.
The total amount of energy varies, with more energy at the bottom and less at the top of the path.
At the very top, most of the energy is potential and just before it hits the ground, most of the energy is kinetic.
At the very top, most of the energy is kinetic and just before it hits the ground, most of the energy is potential.
Answer:
Uhh 2 one
Explanation
Which statement best compares potential and kinetic energy?
O Objects always have more potentiał energy than kinetic energy.
O Kinetic energy increases and potential energy decreases when the velocity of an object increases
O Only potential energy decreases when an object's height increases.
O Objects always have more kinetic energy than potential energy.
Answer:
Kinetic energy increases and potential energy decrease when velocity of an object increase.
- .
?
y
(っ◔◡◔)っ ♥ chose the answer with the question marks ♥
Answer:
okay I'm a bit confused but I like the little emoji dudw
Answer:
?
Explanation:
.
The masses of astronauts are monitored during long stays in orbit, such as when visiting a space station. The astronaut is strapped into a chair that is attached to the space station by springs and the period of oscillation of the chair in a friction-less track is measured.
(a) The period of oscillation of the 10.0 kg chair when empty is 0.750 s. What is the effective force constant of the springs?
(b) What is the mass of an astronaut who has an oscillation period of 2.00 s when in the chair?
(c) The movement of the space station should be negligible. Find the maximum displacement of the 100,000 kg sace station if the astronaut's motion has an amplitude of 0.100 m.
Answer:
a) k = 701.8 N / m, b) m_{ast} = 61.1 kg, c) v ’= -1.3 10⁻⁴ m / s
Explanation:
a) For this exercise let's use the relationship of the angular velocity
w = [tex]\sqrt{ \frac{k}{m} }[/tex]
k = w² m
the angular velocity is related to the period
w = 2π / T
we substitute
k = 4 π² [tex]\frac{m}{T^2}[/tex]
let's calculate
k = 4 π² 10 /0.75²
k = 701.8 N / m
b) now repeat the measurement with an astronaut on the chair
w = [tex]\sqrt{ \frac{k}{m} }[/tex]
where the mass Month the mass of the chair plus the mass of the astronaut
M = m + [tex]m_{ast}[/tex]
M = k / w²
w = 2π / T
let's calculate
w = 2π / 2
w = π rad / s
M = 701.8 /π²
M = 71,111 kg
now we use that
M = m + m_{ast}
m_{ast} = M - m
m_{ast} = 71.111 - 10.0
m_{ast} = 61.1 kg
c) if the astronaut's movement is simple harmonic
x = A cos wt
therefore the speed is
v = [tex]\frac{dx}{dt}[/tex]
v = -Aw sin wt
maximum speed is
v = - Aw
v = 0.100 π
v = 0.31416 m / s
we can suppose that the movement of the space station and the astronaut is equivalent to division of the same
initial instant. Before the move
p₀ = 0
final instant. When the astronaut is moving
p_f = M_station v’+ m_{ast} v
the moment is preserved
p₀ = pf
0 = M__{station} v ’+ m_{ast} v
v ’= - [tex]\frac{m_{ast} }{M_{station} } \ v[/tex]
we substitute
v ’= [tex]\frac{61.1 }{ 100000 } \ 0.31416[/tex]
v ’= -1.3 10⁻⁴ m / s
the negative sign indicates that the station is moving in the opposite direction from the astronaut
The loaded car of a roller coaster has mass M = 320 kg. It goes over the highest hill with a speed v of 21.4 m/s. The radius of curvature R of the hill is [01] m. (a) What is the force (N) that the track must exert on the car? (positive is up) (b) What must be the force (N) that the car exerts on a 61 kg passenger?
This question is incomplete, the complete question is;
The loaded car of a roller coaster has mass M = 320 kg. It goes over the highest hill with a speed v of 21.4 m/s. The radius of curvature R of the hill is 15.8 m.
(a) What is the force (N) that the track must exert on the car? (positive is up)
(b) What must be the force (N) that the car exerts on a 61 kg passenger?
Answer:
a) the force (N) that the track must exert on the car is -6139.14 N
b) the force (N) that the car exerts on a 61 kg passenger is -1170.27 N
Explanation:
Given the data in the question;
Let N represent the force that the track must exerted on the car
Net force on the car Fnet = Mg + N
so
M × a = Mg + N
N = Ma - Mg
N = Ma - M(v²/R)
we substitute
N = (320kg × 9.8m/s²) - ( 320 × ((21.4m/s)² / 15.8 m) )
N = 3136 - ( 320 × 28.9848 )
N = 3136 - 9275.136
N = -6139.14 N
Therefore, the force (N) that the track must exert on the car is -6139.14 N
b) What must be the force (N) that the car exerts on a 61 kg passenger?
Let N represent the force that the car exerts on 61kg passengers
so
Net force of passengers Fnet = mg + N
Ma = Mg + N
N = Ma - Mg
N = Ma - M(v²/R)
N = (61kg × 9.8m/s²) - ( 61 × ((21.4m/s)² / 15.8 m) )
N = 597.8 - ( 61 × 28.9848)
N = 597.8 - 1768.0728
N = -1170.27 N
Therefore, the force (N) that the car exerts on a 61 kg passenger is -1170.27 N
The centripetal force of the track on the car moving in the circular path is [tex]1.465 \times 10^6 \ N[/tex].
The force (N) that the car exerts on a 61 kg passenger is 597.8 N.
Centripetal force of the track
The centripetal force of the track on the car moving in the circular path is calculated as follows;
[tex]F_c = \frac{mv^2}{r}\\\\ F_c = \frac{320 \times 21.4^2}{0.1} \\\\F_c = 1.465 \times 10^6 \ N[/tex]
Normal force of the passengerThe force (N) that the car exerts on a 61 kg passenger is equal to the force the passenger exerts on the car based on Newton's third law of motion.
F = mg
F = 61 x 9.8
F = 597.8 N
Learn more about centripetal force here: https://brainly.com/question/20905151
Static Friction
Now let’s examine the static case. Remain on the “Force graphs” tab at the top of the window. Make sure the box labeled “Ffriction” is checked at the left of the screen, this will allow us to measure to force of friction experienced by an object as it slides down the ramp.
Draw a free body diagram for an object sitting on the incline at rest, assuming the incline is at the maximum angle BEFORE the object starts to move. Be sure to include friction and stipulate whether it is kinetic or static.
Which is an example of kinetic energy?
A. The energy stored in
ethanol
B. A ball sitting at the top of a ramp
C. A compressed spring
D. A hockey puck sliding across ice
D. A hockey puck sliding across ice
A soccer ball was kicked over the edge of a wall and traveled 35 m horizontally at a speed of 5.6m/s. Calculate the vertical height of the wall.
Answer:
Are you sure it was soccer ball? Or meine hearts
Explanation:
The current flow in the light bulb is 0.5A
a.Calculate the amount of electric charge that flow through the bulb in 2 hour
b.If one election carries a
charge 1.6 x 10-14 c Find the number of election through the bulb in 2 hour?
Answer:
Explanation:
Given that,
The current in the light bulb, I = 0.5 A
(a) We know that,
Electric current = charge/time
or
Q = It
Put t = 2 hours = 7200 s
So,
Q = 0.5 × 7200
Q = 3600 C
(b) Charge on one electron, [tex]Q=1.6\times 10^{-19}\ C[/tex]
Let there are n electrons flow through the bulb in 2 hours.
I = Q/t
Since, Q = ne
So,
I = ne/t
[tex]n=\dfrac{I\times t}{e}\\\\n=\dfrac{0.5\times 7200}{1.6\times 10^{-19}}\\\\n=2.25\times 10^{22}[/tex]
Hence, this is the required solution.
Shanti is riding on a train that is moving at a speed of 90 km/h. He is carrying a power cord for his phone that is 1.2 m long.
Which describes the length of the power cord when Shanti gets off the train?
cannot be determined
less than 1.2 m
more than 1.2 m
equal to 1.2 m
Answer:
D. equal to 1.2
Explanation:
on edg
The length of the power cord will be equal to 1.2 m.
Describe about the length of power cord? The train is moving at a speed of 90 km /hr. Train was moving but the person in the train can be considered to be at rest. Shanti is the person travelling on the train. Her cord can be used only by her and the cord length of the phone will be 1.2 m.The length can be measured through the distance.The unit of length is meter.As we know the concept of motion and rest, there only the train in motion, shanti was at rest and shanti's power cord were also in the rest. Power cord length will be determined only at the time of manufacturing.If the power cord length to be change then the crimping process.So, the length will not change suddenly.
The length of the power cord when shanti gets off the train is equal to 1.2 m.
The Correct answer is Option D.
Learn more about motion and rest,
https://brainly.com/question/12284808
#SPJ5
Help plsssssssssss I write it 100 time no one answer
Answer:
1.93×10²⁸ s
Explanation:
From the question given above, the following data were obtained:
Number of electron (e) = 2×10²⁴
Current (I) = 10 A
Time (t) =?
Next, we shall determine the quantity of electricity flowing through pasing through the point. This can be obtained as follow:
1 e = 96500 C
Therefore,
2×10²⁴ e = 2×10²⁴ e × 96500 / 1 e
2×10²⁴ e = 1.93×10²⁹ C
Thus, 1.93×10²⁹ C of electricity is passing through the point.
Finally, we shall determine the time. This can be obtained as follow:
Current (I) = 10 A
Quantity of electricity = 1.93×10²⁹ C
Time (t) =?
Q = it
1.93×10²⁹ = 10 × t
Divide both side by 10
t = 1.93×10²⁹ / 10
t = 1.93×10²⁸ s
Thus, it took 1.93×10²⁸ s for 2×10²⁴ electrons to pass through the point