D. 1,1,2,1
Further explanationEqualization of chemical reactions can be done using variables. Steps in equalizing the reaction equation:
1. gives a coefficient on substances involved in the equation of reaction such as a, b, or c, etc. 2. make an equation based on the similarity of the number of atoms where the number of atoms = coefficient × index (subscript) between reactant and product 3. Select the coefficient of the substance with the most complex chemical formula equal to 1Reaction(unbalanced)
Zn+K₂CrO₄ ⇒ K + ZnCrO₄
Give coefficient
aZn+K₂CrO₄ ⇒ bK + cZnCrO₄
Zn, left=a, right=c⇒a=c
K, left=2, right=b⇒b=2
Cr, left=1, right=c⇒c=1⇒a=1
O,left=4,right=4c⇒4c=4⇒c=1
Reaction(balanced0
Zn+K₂CrO₄ ⇒ 2K + ZnCrO₄
Positive ions have ______ (More or Less) protons than electrons.
Answer:
More i think im remembering correctly
Explanation:
how many hydrogen atoms are there in one mole of ethanol.
Help! I am in a hurry! Will get brainliest if correct!
A cylinder at left with balls evenly spaced throughout the cylinder with an arrow leading to a cylinder at right with balls stacked near the bottom of the cylinder.
Which change of state is shown in the model?
condensation
deposition
boiling
freezing
help meh plz
Answer:
boiling
Explanation:
Answer:
boiling
Explanation:
please help this is worth half of my grade! what letter represents the trough of the wave a,b,c,d,e
Hello good afternoon...God bless the answer to your following question is D
because...A crest point on a wave is the maximum value of upward displacement within a cycle. A crest is a point on a surface wave where the displacement of the medium is at a maximum. A trough is the opposite of a crest, so the minimum or lowest point in a cycle.
Binary Covalent (molecular) Compounds
Name the following covalent compounds:
CO___________________
CO2__________________
NO__________________
NO2___________________________
SF6____________________________
SiF4___________________________
N2S3__________________________
B2H6________________
SO2 ________________
CH4_________________
Write the formula for the following covalent compounds:
Boron trichloride__________
Nitrogen monoxide____________
Dinitrogen monoxide__________
Dinitrogen pentoxide ________
Sulfur hexachloride________
Carbon monoxide__________
Carbon disulfide________
Oxygen difluoride__________
Dinitrogen tetrahydride________
Silicon tetrahydride __________
Mixing up Binary Compounds
Classify & Name the following binary compounds: (I or M)
____BaNO3 _______________
____SrO_______________
____NaI_______________
____Mg3(PO4)2______________________
____K2SO4________________
____OF2_________________________
____NH3_________________________
____BaF2_________________________
____LiCl________________
____BeO________________________
____MgSO4________________
____Al2O3________________________
Classify & Write the formula for the following binary compounds (I or M)
____Phosphorous trichloride____
____Chlorine monofluoride_____
____potassium hydroxide______
____strontium sulfide_____
____Calcium nitrate_______
____Carbon tetrabromide____
____Lithium hydroxide________
____Potassium sulfate____
____lithium bromide_____
____magnesium sulfide_____
___ calcium nitride____
Answer:
why is ur name different sexxxy............................................................
Explanation:
The density of water is 1.00 g/mL. Which substance below can float on water?
Answer:
ice, air, ducks and fabric
Explanation:
its common sense
How many ATOMS of
Hydrogen are found in
Butane (C4H10)?
Answer:
does this help? 17.342%
Explanation:
What is the V2O5 coefficient??
Answer:
1235
Explanation:
if thers a a guess in that number
The compound V₂O₅ has a Seebeck coefficient at a temperature of 50 °C of -990 μV/K.
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:
1)Molecular compounds where in atoms are joined by covalent bonds.
2) ionic compounds where atoms are joined by ionic bond.
3)Inter-metallic compounds where atoms are held by metallic bonds
4) co-ordination complexes where atoms are held by co-ordinate bonds.
They have a unique chemical structure held together by chemical bonds .Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.
Learn more about compounds,here:
https://brainly.com/question/13516179
#SPJ2
Look at the chemical equation below.
2N2 + O2 2N2O
How many Nitrogen molecules are present? ___________
How many Oxygen molecules are present? ___________
How many N2O molecules are present? ___________
The molecules of Nitrogen, oxygen, and N₂O are 2, 1, and 2 respectively.
What is the chemical equation?A chemical equation can be defined as the expression of a chemical reaction in terms of the chemical symbols of the substances. A chemical equation has reactants, formed products, and an arrow indicating the direction of the reaction.
The equation in which the number of atoms of each element is equal on either side of the chemical equation of a reaction is called a balanced chemical equation.
According to the law of mass conservation, the total mass of the elements on the reactant side should be equal to the total mass of elements on the product side.
Given, the chemical equation of the reaction of nitrogen ad oxygen gas can be written as:
2N₂ + O₂ → 2N₂O
The number of molecules of Nitrogen gas is 2 and the molecules of oxygen gas are one and the molecules of N₂O are equal to 2.
Learn more about the chemical equation, here:
brainly.com/question/28294176
#SPJ3
A block of lead displaces 50.5ml of water. The block weighs 698 g. From this
information, calculate the density of lead.
Answer:
13.82 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
From the question we have
[tex]density = \frac{698}{50.5} \\ = 13.8217...[/tex]
We have the final answer as
13.82 g/mLHope this helps you
Which of the following has the highest electronegativity?
A. Na
B. Li
C. C
D. Si
Answer:
C. C, because it’s the highest of all four and C is 2,5 which is medium but the highest one.
Answer:
Si
Explanation:
Because it has the most electrons among the four
This is a science question. What is the skateboarder’s acceleration?
Answer:
2.4
Explanation:
Divide 7.0 by 3.0 you get 2.333333 then round it of to 2.34
What type of bond (Ionic, Covalent or metallic) would be created when titanium bonds with chlorine?
(electronegativity values Ti = 1.54 Cl = 3.16)
Answer:
Covalent
Explanation:
Titanium on reaction with chlorine forms Titanium tetra chloride(TiCl4).
Titanium holds strong covalent bond with chlorine in TiCL4
lonic bonds tend to form between two atoms with what characteristics?
Answer:Ionic bonds are formed through the exchange of valence electrons between atoms, typically a metal and a nonmetal. The loss or gain of valence electrons allows ions to obey the octet rule and become more stable. Ionic compounds are typically neutral. Therefore, ions combine in ways that neutralize their charges.
Explanation:
Ionic bonds tend to form between two atoms with a high electronegativity difference.
Explanation:
An Ionic bond is defined as a chemical bond in which the complete transfer of electrons occurs from one atom to another.The transfer of electrons occurs from less electronegative atom to highly electronegative atomThe high electronegativity difference between the atomsCompounds with ionic bonds categorized as ionic compoundsSo, from this, we can conclude that ionic bonds tend to form between two atoms with a high electronegativity difference.
Learn more about ionic compounds here:
brainly.com/question/7193259?referrer=searchResults
brainly.com/question/1669915?referrer=searchResults
Isopropyl alcohol is a liquid with a density of 0.785 g/cm^3. How much volume would be taken up be 50.0 grams of isopropyl alcohol
Answer:
63.94 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question we have
[tex]volume = \frac{50}{0.785} \\ = 63.694267...[/tex]
We have the final answer as
63.94 cm³Hope this helps you
The diagram above shows the distribution of speeds for a sample of N2(g)
at 25°C
. Which of the following graphs shows the distribution of speeds for a sample of O2(g)
at 25°C
(dashed line) ?
Answer:
A
Explanation:
The Maxwell-Boltzmann equation, is the basis for discussion of the kinetic theory of gases. From it we can understand how gases are distributed at a particular temperature.
Let us remember that the kinetic energy of all gases is the same at the same temperature. However, the distribution of gases depends on their molecular weight at that particular temperature.
Heavier molecules are known to move slowly compared to lighter molecules. Heavier molecules generally have a smaller distribution while lighter molecules spread out.
For this reason, oxygen which is heavier than nitrogen has a smaller distribution as shown in the diagram (molar mass of oxygen = 32g/mol) while nitrogen (molar mass 28 g/mol) has a distribution that is more spread out being a lighter molecule. Hence the option chosen.
Please help
2C3H5O2
1.How many elements are present?
2. How many hydrogen atoms are there?
3. How many oxygen atoms are there?
4.How many total atoms are there?
Answer:
1. 3 elements: C, H, O
2. 10
3. 4
4. 20
Explanation:
PLS ANSWER FAST!!! HURRY I NEED THIS ASAP!!
Which statement about chemical reaction rates is true?
The reaction rates cannot change.
The reaction rates can increase.
The reaction rates are always constant.
The reaction rates cannot decrease
Answer:
The reaction rates cannot charge
Explanation:
Answer:
The answer is B
Explanation:
How many atoms are in 3CaCO3
Answer:
15
Explanation:
3 Calcium
3 Carbon
9 Oxygen
When a solid with a mass of 53.78 g is added to 50.0 ml of water in a graduated cylinder, the volume increases to 56.4 ml. Calculate the density of the solid.
Answer:
The answer is 8.40 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
volume = final volume of water - initial volume of water
volume = 56.4 - 50 = 6.4 mL
We have
[tex]density = \frac{53.78}{6.4} \\ = 8.403125[/tex]
We have the final answer as
8.40 g/mLHope this helps you
Suppose you found a material in which 12.5% of the original radioactive atoms were present. If the half-life is 10years, how old is the material?
Answer:
The material is 30 years old.
Explanation:
The decay of radioactive isotopes can be modelled by the following ordinary differential equation:
[tex]\frac{dm}{dt} = -\frac{m(t)}{\tau}[/tex] (Eq. 1)
Where:
[tex]m(t)[/tex] - Current mass of the isotope, measured in grams.
[tex]\tau[/tex] - Time constant, measured in years.
[tex]\frac{dm}{dt}[/tex] - Rate of change of the isotope in time, measured in grams per year.
After some handling, we find that the solution of the differential equation is:
[tex]\frac{m(t)}{m_{o}} = e^{-\frac{t}{\tau} }[/tex] (Eq. 2)
Where:
[tex]m_{o}[/tex] - Initial mass of the isotope, measured in grams.
[tex]t[/tex] - Time, measured in years.
Now we clear time within the expression above:
[tex]t = -\tau\cdot \ln \frac{m(t)}{m_{o}}[/tex]
Besides, we determine the time constant in terms of the half-life ([tex]t_{1/2}[/tex]), measured in years:
[tex]\tau = \frac{t_{1/2}}{\ln 2}[/tex] (Eq. 3)
If we know that [tex]t_{1/2} = 10\,yr[/tex] and [tex]\frac{m(t)}{m_{o}} = 0.125[/tex], then the age of the material is:
[tex]\tau = \frac{10\,yr}{\ln 2}[/tex]
[tex]\tau = 14.427\,yr[/tex]
[tex]t = -(14.427\,yr)\cdot \ln 0.125[/tex]
[tex]t \approx 30\,yr[/tex]
The material is 30 years old.
After pollen lands on the stigma of a flower, which of the following happens first?
Help I will give brainlist
If a star has a higher apparent magnitude, what does that mean? A low apparent magnitude?
Which of the following is a hypothesis for an experiment measuring solubility of sodium sulfate?
A. O Sodium sulfate will dissolve better in cold water
B.
Sodium sulfate is toxic (poisonous; deadly) to humans.
c. Add sodium sulfate to water
D. O Sodium sulfate is a white powder
In which of the following is the number of neutrons correctly represented
Answer:
there needs to be a picture to answer
What happens to the dry ice after sometime?
Answer:
As a rough rule, five pounds of dry ice will turn from a solid to a gas in 24 hours. It's best to pick up the block of ice just a few hours before your party so it's as frozen as possible when the bash starts.
Explanation:
Arrange the following elements in order from least to greatest electronegativity:
Ca, F, Ne, Fe?
Answer:
The electronegativity from order of least to highest is:
Ne, Ca, Fe, F
Explanation:
Elements in the periodic table have been arranged based on their level of electronegativity (which is the ability of an atom to attract electrons).
According to Paulings scale of rating elements based on their electronegativity, the electronegativity value of Fe, Ca, Ne, and F are 1.83, 1, 0 and 3.98 respectively.
Hence, based on Pauling scale, the order of electronegativity from least to highest is:
Ne > Ca > Fe > F
Convert 5 micrometers to meters
hEy PeEpS!! SEED HALP!!will give da crown to someone u-u
Answer:
D
Explanation:
This answer is correct; if you want you can use context clues, the middle two are not benefits, the first one is just absurd, so the only other logical answer id D. Also, its true.
The middle two are negative, and therefore cannot be benefits no matter how they are looked at.
For an explanation of the first answer and why it's wrong, read the comments.