Answer:
1.424 μC
Explanation:
I'm assuming here, that the charged ball is suspended by the string. If the string also is deflected by the angle α, then the forces acting on it would be: mg (acting downwards),
tension T (acting along the string - to the pivot point), and
F (electric force – acting along the line connecting the charges).
We then have something like this
x: T•sin α = F,
y: T•cosα = mg.
Dividing the first one by the second one we have
T•sin α/ T•cosα = F/mg, ultimately,
tan α = F/mg.
Since we already know that
q1=q2=q, and
r=2•L•sinα,
k=9•10^9 N•m²/C²
Remember,
F =k•q1•q2/r², if we substitute for r, we have
F = k•q²/(2•L•sinα)².
tan α = F/mg =
= k•q²/(2•L•sinα)² •mg.
q = (2•L•sinα) • √(m•g•tanα/k)=
=(2•0.5•0.486) • √(0.0142•9.8•0.557/9•10^9) =
q = 0.486 • √(8.61•10^-12)
q = 0.486 • 2.93•10^-6
q = 1.424•10^-6 C
q = 1.424 μC.
A soccer ball is released from rest at the top of a grassy incline. After 2.2 seconds, the ball travels 22 meters. One second later, the ball reaches the bottom of the incline. (Assume that the acceleration was constant.) How long was the incline
Answer:
x = 46.54m
Explanation:
In order to find the length of the incline you use the following formula:
[tex]x=v_ot+\frac{1}{2}at^2[/tex] (1)
vo: initial speed of the soccer ball = 0 m/s
t: time
a: acceleration
You first use the the fact that the ball traveled 22 m in 2.2 s. Whit this information you can calculate the acceleration a from the equation (1):
[tex]22m=\frac{1}{2}a(2.2s)^2\\\\a=9.09\frac{m}{s^2}[/tex] (2)
Next, you calculate the distance traveled by the ball for t = 3.2 s (one second later respect to t = 2.2s). The values of the distance calculated is the lenght of the incline:
[tex]x=\frac{1}{2}(9.09m/s^2)(3.2s)^2=46.54m[/tex] (3)
The length of the incline is 46.54 m
The Pauli exclusion principle states that Question 1 options: the wavelength of a photon of light times its frequency is equal to the speed of light. no two electrons in the same atom can have the same set of four quantum numbers. both the position of an electron and its momentum cannot be known simultaneously very accurately. the wavelength and mass of a subatomic particle are related by . an electron can have either particle character or wave character.
Answer:
no two electrons in the same atom can have the same set of four quantum numbers
Explanation:
Pauli 's Theory of Exclusion specifies that for all four of its quantum numbers, neither two electrons in the same atom can have similar value.
In a different way, we can say that no more than two electrons can take up the identical orbital, and two electrons must have adversely spin in the identical orbital
Therefore the second option is correct
The smallest shift you can reliably measure on the screen is about 0.2 grid units. This shift corresponds to the precision of positions measured with the best Earth-based optical telescopes. If you cannot measure an angle smaller than this, what is the maximum distance at which a star can be located and still have a measurable parallax
Answer:
The distance is [tex]d = 1.5 *10^{15} \ km[/tex]
Explanation:
From the question we are told that
The smallest shift is [tex]d = 0.2 \ grid \ units[/tex]
Generally a grid unit is [tex]\frac{1}{10}[/tex] of an arcsec
This implies that 0.2 grid unit is [tex]k = \frac{0.2}{10} = 0.02 \ arc sec[/tex]
The maximum distance at which a star can be located and still have a measurable parallax is mathematically represented as
[tex]d = \frac{1}{k}[/tex]
substituting values
[tex]d = \frac{1}{0.02}[/tex]
[tex]d = 50 \ parsec[/tex]
Note [tex]1 \ parsec \ \to 3.26 \ light \ year \ \to 3.086*10^{13} \ km[/tex]
So [tex]d = 50 * 3.08 *10^{13}[/tex]
[tex]d = 1.5 *10^{15} \ km[/tex]
A charged Adam or particle is called a
Answer:
A charged atom or particle is called an ion :)
If electrons are ejected from a given metal when irradiated with a 10-W red laser pointer, what will happen when the same metal is irradiated with a 5-W green laser pointer? (a) Electrons will be ejected, (b) electrons will not be ejected, (c) more information is needed to answer this question. Group of answer choices
Answer:
(b) electrons will not be ejected
Explanation:
Determine the number of photons ejected by 10 W red laser pointer.
The wavelength (λ) of red light is 700 nm = 700 x 10⁻⁹ m
Energy of a photon is given as;
[tex]E = \frac{hc}{\lambda}[/tex]
where;
h is Planck's constant, = 6.626 x 10⁻³⁴ J/s
c is speed of light, = 3 x 10⁸ m/s
[tex]E = \frac{6.626*10^{-34} *3*10^8}{700 X 10^{-9}} \\\\E = 2.8397 *10^{-19} \ J/photon[/tex]
The number of photons emitted by 10 W red laser pointer
10 W = 10 J/s
[tex]Number \ of \ photons = 10(\frac{ J}{s}) * \frac{1}{2.8397*10^{-19}} (\frac{photon}{J} ) = 3.522 *10^{19} \ photons/s[/tex]
Determine the number of photons ejected by 5 W red green pointer
The wavelength (λ) of green light is 500 nm = 500 x 10⁻⁹ m
[tex]E = \frac{hc}{\lambda} = \frac{6.626*10^{-34} *3*10^8}{500*10^{-9}} = 3.9756 *10^{-19} \ J/photon[/tex]
The number of photons emitted by 5 W green laser pointer
5 W = 5 J/s
[tex]Number \ of \ photons = \frac{5J}{s} *\frac{photon}{3.9756*10^{-19}J} = 1.258 *10^{19} \ Photons/s[/tex]
The number of photons emitted by 10 W red laser pointer is greater than the number of photons emitted by 5 W green laser pointer.
Thus, 5 W green laser pointer will not be able to eject electron from the same metal.
The correct option is "(b) electrons will not be ejected"
A harmonic wave is traveling along a rope. It is observed that the oscillator that generates the wave completes 43.0 vibrations in 33.0 s. Also, a given maximum travels 424 cm along the rope in 15.0 s. What is the wavelength
Answer:
0.218
Explanation:
Given that
Total vibrations completed by the wave is 43 vibrations
Time taken to complete the vibrations is 33 seconds
Length of the wave is 424 cm = 4.24 m
to solve this problem, we first find the frequency.
Frequency, F = 43 / 33 hz
Frequency, F = 1.3 hz
Also, we find the wave velocity. Which is gotten using the relation,
Wave velocity = 4.24 / 15
Wave velocity = 0.283 m/s
Now, to get our answer, we use the formula.
Frequency * Wavelength = Wave Velocity
Wavelength = Wave Velocity / Frequency
Wavelength = 0.283 / 1.3
Wavelength = 0.218
A 300-W computer (including the monitor) is turned on for 8.0 hours per day. If electricity costs 15¢ per kWh, how much does it cost to run the computer annually for a typical 365-day year? (Choose the closest answer)
Answer:
Cost per year = $131.4
Explanation:
We are given;
Power rating of computer with monitor;P = 300 W = 0.3 KW
Cost of power per KWh = 15 cents = $0.15
Time used per day by the computer with monitor = 8 hours
Thus; amount of power consumed per 8 hours each day = 0.3 × 8 = 2.4 KWh per day
Thus, for 365 days in a year, total amount amount of power = 2.4 × 365 = 876 KWh
Now, since cost of power per KWh is $0.15, then cost for 365 days would be;
876 × 0.15 = $131.4
As you know, a common example of a harmonic oscillator is a mass attached to a spring. In this problem, we will consider a horizontally moving block attached to a spring. Note that, since the gravitational potential energy is not changing in this case, it can be excluded from the calculations. For such a system, the potential energy is stored in the spring and is given by
U = 12k x 2
where k is the force constant of the spring and x is the distance from the equilibrium position. The kinetic energy of the system is, as always,
K = 12mv2
where m is the mass of the block and v is the speed of the block.
A) Find the total energy of the object at any point in its motion.
B) Find the amplitude of the motion.
C) Find the maximum speed attained by the object during its motion.
Answer:
a) [tex]E = \frac{1}{2} \cdot k \cdot x^{2} + \frac{1}{2} \cdot m \cdot v^{2}[/tex], b) Amplitude of the motion is [tex]A = \sqrt{\frac{2\cdot E}{k} }[/tex], c) The maximum speed attained by the object during its motion is [tex]v_{max} = \sqrt{\frac{2\cdot E}{m} }[/tex].
Explanation:
a) The total energy of the object is equal to the sum of potential and kinetic energies. That is:
[tex]E = K + U[/tex]
Where:
[tex]K[/tex] - Kinetic energy, dimensionless.
[tex]U[/tex] - Potential energy, dimensionless.
After replacing each term, the total energy of the object at any point in its motion is:
[tex]E = \frac{1}{2} \cdot k \cdot x^{2} + \frac{1}{2} \cdot m \cdot v^{2}[/tex]
b) The amplitude of the motion occurs when total energy is equal to potential energy, that is, when objects reaches maximum or minimum position with respect to position of equilibrium. That is:
[tex]E = U[/tex]
[tex]E = \frac{1}{2} \cdot k \cdot A^{2}[/tex]
Amplitude is finally cleared:
[tex]A = \sqrt{\frac{2\cdot E}{k} }[/tex]
Amplitude of the motion is [tex]A = \sqrt{\frac{2\cdot E}{k} }[/tex].
c) The maximum speed of the motion when total energy is equal to kinetic energy. That is to say:
[tex]E = K[/tex]
[tex]E = \frac{1}{2}\cdot m \cdot v_{max}^{2}[/tex]
Maximum speed is now cleared:
[tex]v_{max} = \sqrt{\frac{2\cdot E}{m} }[/tex]
The maximum speed attained by the object during its motion is [tex]v_{max} = \sqrt{\frac{2\cdot E}{m} }[/tex].
A uniformly charged sphere has a potential on its surface of 450 V. At a radial distance of 8.1 m from this surface, the potential is 150 V. What is the radius of the sphere
Answer:
The radius of the sphere is 4.05 m
Explanation:
Given;
potential at surface, [tex]V_s[/tex] = 450 V
potential at radial distance, [tex]V_r[/tex] = 150
radial distance, l = 8.1 m
Apply Coulomb's law of electrostatic force;
[tex]V = \frac{KQ}{r} \\\\V_s = \frac{KQ}{r} \\\\V_r = \frac{KQ}{r+ l}[/tex]
[tex]450 = \frac{KQ}{r} ------equation (i)\\\\150 = \frac{KQ}{r+8.1} ------equation (ii)\\\\divide \ equation (i)\ by \ equation \ (ii)\\\\\frac{450}{150} = (\frac{KQ}{r} )*(\frac{r+8.1}{KQ} )\\\\3 = \frac{r+8.1}{r} \\\\3r = r + 8.1\\\\2r = 8.1\\\\r = \frac{8.1}{2} \\\\r = 4.05 \ m[/tex]
Therefore, the radius of the sphere is 4.05 m
A 2.0-kg object moving at 5.0 m/s collides with and sticks to an 8.0-kg object initially at rest. Determine the kinetic energy lost by the system as a result of this collision.
Answer:
20 J
Explanation:
From the question, since there is a lost in kinetic energy, Then the collision is an inelastic collision.
m'u'+mu = V(m+m')........... Equation 1
Where m' = mass of the moving object, m = mass of the stick, u' = initial velocity of the moving object, initial velocity of the stick, V = common velocity after collision.
make V the subject of the equation above
V = (m'u'+mu)/(m+m')............. Equation 2
Given: m' = 2 kg, m = 8 kg, u' = 5 m/s, u = 0 m/s (at rest).
Substitute into equation 2
V = [(2×5)+(8×0)]/(2+8)
V = 10/10
V = 1 m/s.
Lost in kinetic energy = Total kinetic energy before collision- total kinetic energy after collision
Total kinetic energy before collision = 1/2(2)(5²) = 25 J
Total kinetic energy after collision = 1/2(2)(1²) +1/2(8)(1²) = 1+4 = 5 J
Lost in kinetic energy = 25-5 = 20 J
The collision is inelastic collision. As a result of collision the kinetic energy lost by the given system is 20 J.
Since there is a lost in kinetic energy, the collision is inelastic collision.
m'u'+mu = V(m+m')
[tex]\bold {V =\dfrac { (m'u'+mu)}{(m+m')} }[/tex]
Where
m' = mass of the moving object = 2 kg
m = mass of the stick = 8 kg,
u' = initial velocity of the moving object = 5 m/s
V = common velocity after collision= ?
u = 0 m/s (at rest).
put the values in the formula,
[tex]\bold {V = \dfrac {(2\times 5)+(8\times 0)}{(2+8)}}\\\\\bold {V = \dfrac {10}{10}}\\\\\bold {V = 1\\ m/s.}[/tex]
kinetic energy before collision
[tex]\bold { = \dfrac 1{2} (2)(5^2) = 25 J}[/tex]
kinetic energy after collision
[tex]\bold { = \dfrac 12(2)(1^2) + \dfrac 12(8)(1^2) = 5\ J}[/tex]
Lost in kinetic energy = 25-5 = 20 J
Therefore, As a result of collision the kinetic energy lost by the given system is 20 J.
To know more about Kinetic energy,
https://brainly.com/question/12669551
Suppose two children push horizontally, but in exactly opposite directions, on a third child in a sled. The first child exerts a force of 79 N, the second a force of 92 N, kinetic friction is 5.5 N, and the mass of the third child plus sled is 24 kg.
1. Using a coordinate system where the second child is pushing in the positive direction, calculate the acceleration in m/s2.
2. What is the system of interest if the accelaration of the child in the wagon is to be calculated?
3. Draw a free body diagram including all bodies acting on the system
4. What would be the acceleration if friction were 150 N?
Answer:
Please, read the anser below
Explanation:
1. In order to calculate the acceleration of the children you use the Newton second law for the summation of the implied forces:
[tex]F_2-F_1-F_f=Ma[/tex] (1)
Where is has been used that the motion is in the direction of the applied force by the second child
F2: force of the second child = 92N
F1: force of the first child = 79N
Ff: friction force = 5.5N
M: mass of the third child = 24kg
a: acceleration of the third child = ?
You solve the equation (1) for a, and you replace the values of the other parameters:
[tex]a=\frac{F_2-F_1.F_f}{M}=\frac{96N-79N-5.5N}{24kg}=0.48\frac{m}{s^2}[/tex]
The acceleration is 0.48m/s^2
2. The system of interest is the same as before, the acceleration calculated is about the motion of the third child.
3. An image with the diagram forces is attached below.
4. If the friction would be 150N, the acceleration would be zero, because the friction force is higher than the higher force between children, which is 92N.
Then, the acceleration is zero
In a hydraulic lift, if the pressure exerted on the liquid by one piston is increased by 100 N/m2 , how much additional weight can the other piston slowly lift if its cross sectional area is 25 m2
Answer:
The additional weight and mass needed for lifting the other piston slowly is 2500 N and 254.92 kg, respectively.
Explanation:
By means of the Pascal's Principle, the hydraulic lift can be modelled by the following two equations:
Hydraulic Lift - Before change
[tex]P = \frac{F}{A}[/tex]
Hydraulic Lift - After change
[tex]P + \Delta P = \frac{F + \Delta F}{A}[/tex]
Where:
[tex]P[/tex] - Hydrostatic pressure, measured in pascals.
[tex]\Delta P[/tex] - Change in hydrostatic pressure, measured in pascals.
[tex]A[/tex] - Cross sectional area of the hydraulic lift, measured in square meters.
[tex]F[/tex] - Hydrostatic force, measured in newtons.
[tex]\Delta F[/tex] - Change in hydrostatic force, measured in newtons.
The additional weight is obtained after some algebraic handling and the replacing of all inputs:
[tex]\frac{F}{A} + \Delta P = \frac{F}{A} + \frac{\Delta F}{A}[/tex]
[tex]\Delta P = \frac{\Delta F}{A}[/tex]
[tex]\Delta F = A\cdot \Delta P[/tex]
Given that [tex]\Delta P = 100\,Pa[/tex] and [tex]A = 25\,m^{2}[/tex], the additional weight is:
[tex]\Delta F = (25\,m^{2})\cdot (100\,Pa)[/tex]
[tex]\Delta F = 2500\,N[/tex]
The additional mass needed for the additional weight is:
[tex]\Delta m = \frac{\Delta F}{g}[/tex]
Where:
[tex]\Delta F[/tex] - Additional weight, measured in newtons.
[tex]\Delta m[/tex] - Additional mass, measured in kilograms.
[tex]g[/tex] - Gravitational constant, measured in meters per square second.
If [tex]\Delta F = 2500\,N[/tex] and [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], then:
[tex]\Delta m = \frac{2500\,N}{9.807\,\frac{m}{s^{2}} }[/tex]
[tex]\Delta m = 254.92\,kg[/tex]
The additional weight and mass needed for lifting the other piston slowly is 2500 N and 254.92 kg, respectively.
Professional baseball player Nolan Ryan could pitch a baseball at approximately 160.0 km/h. At that average velocity, how long (in s) did it take a ball thrown by Ryan to reach home plate, which is 18.4 m from the pitcher's mound
Answer:
t = 0.414s
Explanation:
In order to calculate the time that the ball takes to reach home plate, you assume that the speed of the ball is constant, and you use the following formula:
[tex]t=\frac{d}{v}[/tex] (1)
d: distance to the plate = 18.4m
v: speed of the ball = 160.0km/h
You first convert the units of the sped of the ball to appropriate units (m/s)
[tex]160.0\frac{km}{h}*\frac{1h}{3600s}*\frac{1000m}{1km}=44.44\frac{m}{s}[/tex]
Then, you replace the values of the speed v and distance s in the equation (1):
[tex]t=\frac{18.4m}{44.44m/s}=0.414s[/tex]
THe ball takes 0.414s to reach the home plate
Oh football player kicks a football from the height of 4 feet with an initial vertical velocity of 64 ft./s use the vertical motion model H equals -16 tea to the power of 2+ VT plus S where V is initial velocity and feet per second and S is the height and feet to calculate the amount of time the football is in the air before it hits the ground round your answer to the nearest 10th if necessary.
Answer:
4.1 seconds
Explanation:
The height of the football is given by the equation:
[tex]H = -16t^2 + V*t + S[/tex]
Using the inicial position S = 4 and the inicial velocity V = 64, we can find the time when the football hits the ground (H = 0):
[tex]0 = -16t^2 + 64*t + 4[/tex]
[tex]4t^2 - 16t - 1 = 0[/tex]
Using Bhaskara's formula, we have:
[tex]\Delta = b^2 - 4ac = (-16)^2 - 4*4*(-1) = 272[/tex]
[tex]t_1 = (-b + \sqrt{\Delta})/2a[/tex]
[tex]t_1 = (16 + 16.49)/8 = 4.06\ seconds[/tex]
[tex]t_2 = (-b - \sqrt{\Delta})/2a[/tex]
[tex]t_2 = (16 - 16.49)/8 = -0.06\ seconds[/tex]
A negative time is not a valid result for this problem, so the amount of time the football is in the air before hitting the ground is 4.1 seconds.
The amount of time the football spent in air before it hits the ground is 4.1 s.
The given parameters;
initial velocity of the ball, V = 64 ft/sthe height, S = 4 ftTo find:
the amount of time the football spent in air before it hits the groundUsing the vertical model equation given as;
[tex]H = -16t^2 + Vt + S\\\\[/tex]
the final height when the ball hits the ground, H = 0
[tex]0 = -16t^2 + 64t + 4\\\\16t^2 - 64t - 4 = 0\\\\divide \ through \ by\ 4\\\\4t^2 - 16t - 1= 0\\\\solve \ the \ quadratic \ equation \ using \ the \ formula \ method;\\\\\\a = 4, \ b = -16, \ c = - 1\\\\t = \frac{-b \ \ + /- \ \ \ \sqrt{b^2 - 4ac} }{2a} \\\\[/tex]
[tex]t = \frac{-(-16) \ \ + /- \ \ \ \sqrt{(-16^2 )- 4(4\times -1)} }{2\times 4}\\\\t = \frac{16 \ \ + /- \ \ \sqrt{272} }{8} \\\\t = \frac{16 \ \ +/- \ \ 16.49}{8} \\\\t = \frac{16 - 16.49}{8} \ \ \ \ or \ \ \ \frac{16 + 16.49}{8} \\\\t = -0.61 \ s \ \ or \ \ \ 4.06 \ s\\\\t\approx 4.1 \ s[/tex]
Thus, the amount of time the football spent in air before it hits the ground is 4.1 s.
Learn more here: https://brainly.com/question/2018532
A double slit illuminated with light of wavelength 588 nm forms a diffraction pattern on a screen 11.0 cm away. The slit separation is 2464 nm. What is the distance between the third and fourth bright fringes away from the central fringe
Answer:
[tex]y_{4}-y_{3}=35.22-11.27=23.95 \mathrm{cm}[/tex]
Explanation:
Given that
Wavelength [tex]\lambda=588 \mathrm{nm}[/tex]
slit separation [tex]\mathrm{d}=2464 \mathrm{nm}[/tex]
slit screen distance [tex]\mathrm{D}=11 \mathrm{cm}[/tex]
We know that for double slit the maxima condition is that
[tex]\operatorname{dsin} \theta=m \lambda[/tex]
[tex]\sin \theta=\frac{m \lambda}{d}[/tex]
[tex]\theta=\sin ^{-1}\left(\frac{\mathrm{m} \lambda}{\mathrm{d}}\right)[/tex]
For small angle approximation, [tex]\sin \theta \approx \tan \theta \approx \theta[/tex]
[tex]\tan \theta=\frac{y_{m}}{D}[/tex]
[tex]y_{m}=D \times \tan \left[\sin ^{-1}\left(\frac{m \lambda}{d}\right)\right][/tex]
Now [tex]y_{4}[/tex] [tex]y_{4}=D \times \tan \left[\sin ^{-1}\left(\frac{4 \lambda}{d}\right)\right]=11 \times \tan \left[\sin ^{-1}\left(\frac{4 \times 588 \mathrm{nm}}{2464 \mathrm{nm}}\right)\right]=35.22 \mathrm{cm}[/tex]
Again [tex]y_{3}=D \times \tan \left[\sin ^{-1}\left(\frac{3 \lambda}{d}\right)\right]=11 \times \tan \left[\sin ^{-1}\left(\frac{3 \times 588 \mathrm{nm}}{2464 \mathrm{nm}}\right)\right]=11.27 \mathrm{cm}[/tex]
Hence [tex]y_{4}-y_{3}=35.22-11.27=23.95 \mathrm{cm}[/tex]
What do behaviorism and cognitive psychology have in common?
O Both rely on the scientific method.
Both attempt to explain human behavior.
Both note the differences between human and animal behavior
Behaviorism focuses on actions only.
Answer:
Both attempt to explain human behavior
Explanation:
Psychology is generally regarded as the science of human behavior. Behaviourism is the psychological theory which holds that behaviour can be fully understood in terms of conditioning, without actually considering thoughts or feelings. The theory holds that psychological disorders can be aptly handled by simply altering the behavioural patterns of the individual. It involves the study of stimulus and responses.
Cognitive psychology attempts to decipher what is going on in people's minds. That is, it looks at the mind as a processor of information. Hence we can define cognitive psychology as the study of the internal mental processes. This according to behaviorists, cannot be studied in measurable terms as in behaviourism (stimulus response approach) even though mental processes are known to influence human behavior significantly.
Hence, both behaviourism and cognitive psychology attempt to study human behavior from different perspectives.
The Bohr radius a0 is the most probable distance between the proton and the electron in the Hydrogen atom, when the Hydrogen atom is in the ground state. The value of the Bohr Radius is: 1 a0 = 0.529 angstrom. One angstrom is 10-10 m. What is the magnitude of the electric force between a proton and an electron when they are at a distance of 2.63 Bohr radius away from each other?
Answer:
The electric force is [tex]F = 11.9 *10^{-9} \ N[/tex]
Explanation:
From the question we are told that
The Bohr radius at ground state is [tex]a_o = 0.529 A = 0.529 ^10^{-10} \ m[/tex]
The values of the distance between the proton and an electron [tex]z = 2.63a_o[/tex]
The electric force is mathematically represented as
[tex]F = \frac{k * n * p }{r^2}[/tex]
Where n and p are charges on a single electron and on a single proton which is mathematically represented as
[tex]n = p = 1.60 * 10^{-19} \ C[/tex]
and k is the coulomb's constant with a value
[tex]k =9*10^{9} \ kg\cdot m^3\cdot s^{-4}\cdot A^2.[/tex]
substituting values
[tex]F = \frac{9*10^{9} * [(1.60*10^{-19} ]^2)}{(2.63 * 0.529 * 10^{-10})^2}[/tex]
[tex]F = 11.9 *10^{-9} \ N[/tex]
g The Trans-Alaskan pipeline is 1,300 km long, reaching from Prudhoe Bay to the port of Valdez, and is subject to temperatures ranging from -71°C to +35°C. How much does the steel pipeline expand due to the difference in temperature?
Answer:
ΔL = 1.653 km
Explanation:
The linear expansion of any object due to change in temperature is given by the following formula:
ΔL = αLΔT
where,
ΔL = Change in length or expansion of steel pipe line = ?
α = coefficient of linear expansion of steel = 12 x 10⁻⁶ /°C
L = Original Length of the steel pipe = 1300 km
ΔT = Change in temperature = 35°C - (- 71°C) = 35°C + 71°C = 106°C
Therefore,
ΔL = (12 x 10⁻⁶ /°C)(1300 km)(106°C)
ΔL = 1.653 km
which of the following best describes a stable atom?
Water molecules are made of slightly positively charged hydrogen atoms and slightly negatively charged oxygen atoms. Which force keeps water molecules stuck to one another? strong nuclear gravitational weak nuclear electromagnetic
Answer:
The answer is electromagnetic
Answer:
electromagnetic
Explanation:
edge 2021
what is a push or a pull on an object known as
Answer:
Force
Explanation:
Force is simply known as pull or push of an object
A spherical balloon is made from a material whose mass is 4.30 kg. The thickness of the material is negligible compared to the 1.54-m radius of the balloon. The balloon is filled with helium (He) at a temperature of 289 K and just floats in air, neither rising nor falling. The density of the surrounding air is 1.19 kg/m3. Find the absolute pressure of the helium gas.
Answer:
P = 5.97 × 10^(5) Pa
Explanation:
We are given;
Mass of balloon;m_b = 4.3 kg
Radius;r = 1.54 m
Temperature;T = 289 K
Density;ρ = 1.19 kg/m³
We know that, density = mass/volume
So, mass = Volume x Density
We also know that Force = mg
Thus;
F = mg = Vρg
Where m = mass of balloon(m_b) + mass of helium (m_he)
So,
(m_b + m_he)g = Vρg
g will cancel out to give;
(m_b + m_he) = Vρ - - - eq1
Since a sphere shaped balloon, Volume(V) = (4/3)πr³
V = (4/3)π(1.54)³
V = 15.3 m³
Plugging relevant values into equation 1,we have;
(3 + m_he) = 15.3 × 1.19
m_he = 18.207 - 3
m_he = 15.207 kg = 15207 g
Molecular weight of helium gas is 4 g/mol
Thus, Number of moles of helium gas is ; no. of moles = 15207/4 ≈ 3802 moles
From ideal gas equation, we know that;
P = nRT/V
Where,
P is absolute pressure
n is number of moles
R is the gas constant and has a value lf 8.314 J/mol.k
T is temperature
V is volume
Plugging in the relevant values, we have;
P = (3802 × 8.314 × 289)/15.3
P = 597074.53 Pa
P = 5.97 × 10^(5) Pa
Which best describes friction?
Answer:
It is the force that opposes motion between two surfaces touching each other. ( OR ) The force between two surfaces that are sliding or trying to slide across each other.
Explanation:
Answer:
a constant force that acts on objects that rub together
Explanation:
a constant force that acts on objects that rub together
according to newtons second law of motion, what is equal to the acceleration of an object
Answer: According to Newtons second Law of motion ;
F = ma (Force equals mass multiplied by acceleration.)
The acceleration is directly proportional to the net force; the net force equals mass times acceleration; the acceleration in the same direction as the net force; an acceleration is produced by a net force
Explanation:
A 56.0 g ball of copper has a net charge of 2.10 μC. What fraction of the copper’s electrons has been removed? (Each copper atom has 29 protons, and copper has an atomic mass of 63.5.)
Answer:
The fraction of the cooper's electrons that is removed is [tex]8.5222\times 10^{-11}[/tex].
Explanation:
An electron has a mass of [tex]9.1 \times 10^{-31}\,kg[/tex] and a charge of [tex]-1.6 \times 10^{-19}\,C[/tex]. Based on the Principle of Charge Conservation, [tex]-2.10\times 10^{-6}\,C[/tex] in electrons must be removed in order to create a positive net charge. The amount of removed electrons is found after dividing remove charge by the charge of a electron:
[tex]n_{R} = \frac{-2.10\times 10^{-6}\,C}{-1.6 \times 10^{-19}\,C}[/tex]
[tex]n_{R} = 1.3125 \times 10^{13}\,electrons[/tex]
The number of atoms in 56 gram cooper ball is determined by the Avogadro's Law:
[tex]n_A = \frac{m_{ball}}{M_{Cu}}\cdot N_{A}[/tex]
Where:
[tex]m_{ball}[/tex] - Mass of the ball, measured in kilograms.
[tex]M_{Cu}[/tex] - Atomic mass of cooper, measured in grams per mole.
[tex]N_{A}[/tex] - Avogradro's Number, measured in atoms per mole.
If [tex]m_{ball} = 56\,g[/tex], [tex]M_{Cu} = 63.5\,\frac{g}{mol}[/tex] and [tex]N_{A} = 6.022\times 10^{23}\,\frac{atoms}{mol}[/tex], the number of atoms is:
[tex]n_{A} = \left(\frac{56\,g}{63.5\,\frac{g}{mol} } \right)\cdot \left(6.022\times 10^{23}\,\frac{atoms}{mol} \right)[/tex]
[tex]n_{A} = 5.3107\times 10^{23}\,atoms[/tex]
As there are 29 protons per each atom of cooper, there are 29 electrons per atom. Hence, the number of electrons in cooper is:
[tex]n_{E} = \left(29\,\frac{electrons}{atom} \right)\cdot (5.3107\times 10^{23}\,atoms)[/tex]
[tex]n_{E} = 1.5401\times 10^{23}\,electrons[/tex]
The fraction of the cooper's electrons that is removed is the ratio of removed electrons to total amount of electrons when net charge is zero:
[tex]x = \frac{n_{R}}{n_{E}}[/tex]
[tex]x = \frac{1.3125\times 10^{13}\,electrons}{1.5401\times 10^{23}\,electrons}[/tex]
[tex]x = 8.5222 \times 10^{-11}[/tex]
The fraction of the cooper's electrons that is removed is [tex]8.5222\times 10^{-11}[/tex].
The magnet has an unchanging magnetic field: very strong near the magnet, and weak far from the magnet. How did the magnetic field through the coil change as the magnet fell toward it? How did the magnetic flux through the coil change as the magnet fell toward it?
Answer:
The magnetic field through the coil at first increases steadily up to its maximum value, and then decreases gradually to its minimum value.
Explanation:
At first, the magnet fall towards the coils; inducing a gradually increasing magnetic field through the coil as it falls into the coil. At the instance when half the magnet coincides with the coil, the magnetic field magnitude on the coil is at its maximum value. When the magnet falls pass the coil towards the floor, the magnetic field then starts to decrease gradually from a strong magnitude to a weak magnitude.
This action creates a changing magnetic flux around the coil. The result is that an induced current is induced in the coil, and the induced current in the coil will flow in such a way as to oppose the action of the falling magnet. This is based on lenz law that states that the induced current acts in such a way as to oppose the motion or the action that produces it.
A coil is connected to a galvanometer, which can measure the current flowing through the coil. You are not allowed to connect a battery to this coil. Given a magnet, a battery and a long piece of wire, can you induce a steady current in that coil?
Answer:
Yes we can induce current in the coil by moving the magnet in and out of the coil steadily.
Explanation:
A current can be induced there using the magnetic field and the coil of wire. Moving the bar magnet around the coil can induce a current and this is called electromagnetic induction.
What is electromagnetic induction ?The generation of an electromotive force across an electrical conductor in a fluctuating magnetic field is known as electromagnetic or magnetic induction.
Induction was first observed in 1831 by Michael Faraday, and James Clerk Maxwell mathematically named it Faraday's law of induction. The induced field's direction is described by Lenz's law.
Electrical equipment like electric motors and generators as well as parts like inductors and transformers have all found uses for electromagnetic induction.
Here, moving the bar magnet around the coil generates the electronic movement followed by a generation of electric current.
Find more on electromagnetic induction :
https://brainly.com/question/13369951
#SPJ6
A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at the same level. What is the initial force that must be applied to the
Answer:
F₂ = 925.92 N
Explanation:
In a hydraulic lift the normal stress applied to one arm must be equally transmitted to the other arm. Therefore,
σ₁ = σ₂
F₁/A₁ = F₂/A₂
F₂ = F₁ A₂/A₁
where,
F₂ = Initial force that must be applied to narrow arm = ?
F₁ = Load on Wider Arm to be raised = 12000 N
A₁ = Area of wider arm = πr₁² = π(18 cm)² = 324π cm²
A₂ = Area of narrow arm = πr₂² = π(5 cm)² = 25π cm²
Therefore,
F₂ = (12000 N)(25π cm²)/(324π cm²)
F₂ = 925.92 N
Two large rectangular aluminum plates of area 180 cm2 face each other with a separation of 3 mm between them. The plates are charged with equal amount of opposite charges, ±17 µC. The charges on the plates face each other. Find the flux (in N · m2/C) through a circle of radius 3.3 cm between the plates when the normal to the circle makes an angle of 4° with a line perpendicular to the plates. Note that this angle can also be given as 180° + 4°. N · m2/C
Answer:
Φ = 361872 N.m^2 / C
Explanation:
Given:-
- The area of the two plates, [tex]A_p = 180 cm^2[/tex]
- The charge on each plate, [tex]q = 17 * 10^-^6 C[/tex]
- Permittivity of free space, [tex]e_o = 8.85 * 10^-^1^2 \frac{C^2}{N.m^2}[/tex]
- The radius for the flux region, [tex]r = 3.3 cm[/tex]
- The angle between normal to region and perpendicular to plates, θ = 4°
Find:-
Find the flux (in N · m2/C) through a circle of radius 3.3 cm between the plates.
Solution:-
- First we will determine the area of the region ( Ar ) by using the formula for the area of a circle as follows. The region has a radius of r = 3.3 cm:
[tex]A_r = \pi *r^2\\\\A_r = \pi *(0.033)^2\\\\A_r = 0.00342 m^2[/tex]
- The charge density ( σ ) would be considered to be uniform for both plates. It is expressed as the ratio of the charge ( q ) on each plate and its area ( A_p ):
σ = [tex]\frac{q}{A_p} = \frac{17*10^-^6}{0.018} \\[/tex]
σ = 0.00094 C / m^2
- We will assume the electric field due to the positive charged plate ( E+ ) / negative charged plate ( E- ) to be equivalent to the electric field ( E ) of an infinitely large charged plate with uniform charge density.
[tex]E+ = E- = \frac{sigma}{2*e_o} \\\\[/tex]
- The electric field experienced by a region between two infinitely long charged plates with uniform charge density is the resultant effect of both plates. So from the principle of super-position we have the following net uniform electric field ( E_net ) between the two plates:
[tex]E_n_e_t = (E+) + ( E-)\\\\E_n_e_t = \frac{0.00094}{8.85*10^-^1^2} \\\\E_n_e_t = 106214689.26553 \frac{N}{C} \\[/tex]
- From the Gauss-Law the flux ( Φ ) through a region under uniform electric field ( E_net ) at an angle of ( θ ) is:
Φ = E_net * Ar * cos ( θ )
Φ = (106214689.26553) * (0.00342) * cos ( 5 )
Φ = 361872 N.m^2 / C
A long horizontal hose of diameter 3.4 cm is connected to a faucet. At the other end, there is a nozzle of diameter 1.8 cm. Water squirts from the nozzle at velocity 14 m/sec. Assume that the water has no viscosity or other form of energy dissipation.
A) What is the velocity of the water in the hose ?
B) What is the pressure differential between the water in the hose and water in the nozzle ?
C) How long will it take to fill a tub of volume 120 liters with the hose ?
Answer:
a) v₁ = 3.92 m / s , b) ΔP = = 9.0 10⁴ Pa, c) t = 0.0297 s
Explanation:
This is a fluid mechanics exercise
a) let's use the continuity equation
let's use index 1 for the hose and index 2 for the nozzle
A₁ v₁ = A₂v₂
in area of a circle is
A = π r² = π d² / 4
we substitute in the continuity equation
π d₁² / 4 v₁ = π d₂² / 4 v₂
d₁² v₁ = d₂² v₂
the speed of the water in the hose is v1
v₁ = v₂ d₂² / d₁²
v₁ = 14 (1.8 / 3.4)²
v₁ = 3.92 m / s
b) they ask us for the pressure difference, for this we use Bernoulli's equation
P₁ + ½ ρ v₁² + m g y₁ = P₂ + ½ ρ v₂² + mg y2
as the hose is horizontal y₁ = y₂
P₁ - P₂ = ½ ρ (v₂² - v₁²)
ΔP = ½ 1000 (14² - 3.92²)
ΔP = 90316.8 Pa = 9.0 10⁴ Pa
c) how long does a tub take to flat
the continuity equation is equal to the system flow
Q = A₁v₁
Q = V t
where V is the volume, let's equalize the equations
V t = A₁ v₁
t = A₁ v₁ / V
A₁ = π d₁² / 4
let's reduce it to SI units
V = 120 l (1 m³ / 1000 l) = 0.120 m³
d1 = 3.4 cm (1 m / 100cm) = 3.4 10⁻² m
let's substitute and calculate
t = π d₁²/4 v1 / V
t = π (3.4 10⁻²)²/4 3.92 / 0.120
t = 0.0297 s