Answer:
Explanation:
Over 68 percent of the fresh water on Earth is found in icecaps and glaciers, and just over 30 percent is found in ground water. Only about 0.3 percent of our fresh water is found in the surface water of lakes, rivers, and swamps. Of all the water on Earth, more than 99 percent of Earth's water is unusable by humans and many other living things!
10. Which one of the following is not true about covalent bonds?
Most covalent substances do not dissolve well in water
Covalent bond can form polar and non polar bonds and shape
Covalent bond is one of the strongest bonds
Most of covalent substance does not conduct heat and electricity
Most covalent bonds have moderate to love melting and boiling point
Answer:
Most covalent bonds have moderate to love melting and boiling point
Explanation:
Most covalent compounds have relatively low melting points and boiling points.
UGRENT! Please help showing all work
Answer:
a. Oxygen
b. 20.39g of Al₂O₃
c. 87%
Explanation:
In order to produce 2moles of Al₂O₃, we need to make react 4 moles of Al, to 3 moles of O₂.
We determine the limiting reactant with the moles of each:
12.98g / 26.98g/mol = 0.481 moles of Al
9.6g / 32g/mol = 0.300 moles of oxygen
4 moles of Al react to 3 moles of O₂
Then, 0.481 mol may react to (0.481 . 3)/4 = 0.361 moles
We only have 0.300 moles of O₂ and we need 0.361. Oxygen is the limiting reactant.
So 3 moles of O₂ can produce 2 moles of Al₂O₃
Our 0.300 moles may produce (0.300 . 2) / 3 = 0.200 mol
Our theoretical yield is: 0.2 mol . 101.96g/ mol = 20.39 g
To determine the percent yield we calculate:
(Produced yield/ Thoeretical yield) . 100 → (17.74 /20.39) . 100 = 87%
would the pressure exerted by the gas in the tank would increase if the scuba tank were to increase in temperature?
Answer:
In fact, a full scuba tank will gain about 5-6 psi for every degree of temperature increase. This is one reason that full tanks should not be left in a hot trunk of a car. A tank filled to 3000 psi could easily reach 3500 psi if the temperature of it increased substantially.
Pls help fast, I will give brainliest!
Answer:
c
Explanation:
List as many things as you can see in the picture below
Abiotic (Non-Living)___________Biotic (Living)
__________________ ................ ___________________ __________________ ................ ___________________
___________________ ___________________
What is the correct order for the development of the atomic model
Answer: I think it's A. C-A-D-B
Explanation:
John Dalton's theory was publicized in 1803
J.J Thomson's theory was publicized in 1904
Ernest Rutherford's theory was publicized in 1911
And Neil Bohr's was publicized in 1926
Maya made this picture to represent a chemical reaction:
Which of the following statements best explains the type of chemical reaction represented by Maya's picture?
It is neither a synthesis reaction nor a decomposition reaction because two reactants form two products.
It represents a decomposition reaction because two reactants break apart and form two products.
It is neither a synthesis reaction nor a decomposition reaction because the total mass of the products is less than the total mass of the reactants.
It represents a synthesis reaction because the same atoms are present in the reactants and products.
Answer:
It is neither a synthesis reaction nor a decomposition reaction because two reactants form two products.
Explanation:
This reaction would be considered a single replacement reaction.
The chemical reaction involves the products and the reactants. The image is neither synthesis nor decomposition as the two products are formed from two reactants. Thus, option A is correct.
What is a chemical reaction?A chemical reaction includes the chemical interaction between the reactants to yield the products. In a synthesis reaction, two reactants interact to produce a different molecule or compound.
In a decomposition reaction, a reactant undergoes splitting to produce products and energy. But in the image two reactants produces two products that neither of the reaction shows.
This type of reaction is seen as the single replacement reaction where the more reactive element displaces the less reactive from the compound to form the new molecule.
Therefore, option a. Maya's picture represents a single replacement reaction but not a synthesis or decomposition reaction.
Learn more about the chemical reactions here:
https://brainly.com/question/16099976
#SPJ2
The job of the ______ is to hold all of the parts of a cell together
Answer:
cell membrane
Explanation:
it holds everything together
¿Cuántos gramos de dicloruro de manganeso se obtienen cuando reaccionan 7,5 g de ácido clorhídrico? MnO2 + 4 HCl = Mn Cl2 + Cl2 + 2 H2O *
Answer:
6.6 g
Explanation:
La ecuación de la reacción es;
MnO2 + 4 HCl -------> MnCl2 + Cl2 + 2H2O
Número de moles de HCl que reaccionan = 7.5g / 36.5 g / mol = 0.21 moles
Dado que;
4 moles de HCl producen 1 mol de MnCl2
0,21 moles de HCl producen 0,21 * 1/4 = 0,0525 moles de MnCl2.
Masa de MnCl2 = 125,844 g / mol * 0,0525 moles = 6.6 g
A tank consists of a gaseous mixture of 3.83 g of triselenium diiodide, 2.62 g of ammonium telluride, and 1.82 g of iridium (i) sulfate. What is the partial pressure in atm of ammonium telluride if the total pressure in the tank is 2.795 atm?
Answer: The partial pressure in atm of ammonium telluride is 1.48 atm
Explanation:
According to Raoult's law, the partail pressure of a component at a given temperature is equal to the mole fraction of that component multiplied by the total pressure
[tex]p_A=x\times p_{total}[/tex]
where, x = mole fraction
[tex]p_A[/tex] = partial pressure of A
[tex]p_{total}[/tex] = total pressure
[tex]x_{\text {ammonium telluride}}=\frac{\text {moles of ammonium telluride}}{\text {total moles}}[/tex],
[tex]x_{\text {ammonium telluride}}=\frac{\frac{2.62g}{164g/mol}}{\frac{2.62g}{164g/mol}+\frac{3.83g}{333g/mol}+\frac{1.82g}{673g/mol}}=0.53[/tex]
[tex]p_{\text {ammonium telluride}}=0.53\times 2.795atm=1.481atm[/tex]
Thus the partial pressure in atm of ammonium telluride is 1.48 atm
How do ethnics affect scientific research ?
Answer:
A
Explanation:
scientists should not be allowed to conduct research that is harmful to others.
3. You believe that water boils at 212 degrees Fahrenheit (100 degrees Celsius). Write the numberon the scale from best to worst.
1. Your cousin said that he tested the temperature of water boiling and found that it was 100°C.
2. Most people you know believe that water boils at 100°C.
3. You used a thermometer to measure the temperature at which water boiled. You repeated the experiment 3 times. Each time the thermometer read 100°C.
4. You read an article in a science journal from 50 different labs around the world that have tested the temperature of water and found that it boils at 100°C in every location.
You come across an article in a scientific journal from 50 different laboratories around the globe that measured the boiling point of water and discovered that it is 100°C everywhere.
What transpires when water is heated to 100 C (This is 212 F)?Water turns into gas around 212°F (100°C), which is the temperature at which it begins to boil (water vapor). Pressure affects the melting/freezing and boiling points. Water's boiling point changes when air pressure changes. The boiling point decreases with increasing altitude or decreasing pressure.
At 212 degrees Fahrenheit, does water boil, or at 100 degrees?Water has a freezing point of 32 degrees Fahrenheit and a boiling point of 212 degrees Fahrenheit on the Fahrenheit scale.
To know more about laboratories visit:-
https://brainly.com/question/28233400
#SPJ4
How do collisions between molecules transfer energy from a system of
reacting substances to its surroundings?
A. They cause heat to flow from the system to the surroundings.
O B. They cause molecules to flow into the system from the
surroundings
C. They cause the potential energy of the system to increase
D. They cause the thermal energy of the surroundings to decrease.
Answer:
A. They cause heat to flow from the system to the surroundings.
Explanation:
Answer:
A. They cause heat to flow from the system to the surroundings.
Explanation:
a p e x , just took the quiz
what are the formulas for the products of the reaction:
calcium chloride+ silver nitrate
Answer:
CaCl2 + 2AgNO3 = Ca(NO3)2 + 2AgCl
Explanation:
Calcium chloride react with silver nitrate to produce calcium nitrate and silver(1) chloride
Which of the following would cause entropy to decrease?
A. CO2(g) → C02()
B. CO2(s) + CO2()
C. CO2() + CO2(9)
D. CO2(s) → C02(9)
The change that would cause entropy to decrease is CO2 gas changing to solid:
CO2(g) → C02(s)What is entropy?Entropy refers to the degree of randomness of a substance.
The higher the degree of randomness the higher the entropy value of that substance.
Entropy increases with increase in temperature as particles of substances gain more kinetic energy.
However, lowering temperature decreases entropy values.
The change from gas to liquid or solid involves lowering of temperature.
Therefore, the change that would cause entropy to decrease is CO2 gas changing to solid.
Learn more about entropy at: https://brainly.com/question/419265
What is the molecular formula for Hydrochloric acid
Answer:
HCI
Explanation:
Hope this helps. :))))
the question is~ Where does the heat come from for geothermal energy?
Answer:
The Earth
Explanation:
Answer:
The Earth
Explanation:
Geothermal energy comes from the sub surface of the Earth. It is contained in the rocks and fluids beneath the earth's crust and can be found as far down to the earth's hot molten rock, magma.
Which type of galaxy contains mostly new stars because it has lots
of dust and gas
Think of a real-life situation in which measuring work and power would be important
Answer:
Being a CEO holds a lot of power and work but, you would need to be able to manage thus power to be able to keep your company running in good hands. work comes in because as a ceo you'll obviously have lots of work but you'll also have employees all of which assist you with managing work
Find the mass of 0.456 mol of Ca(OH)2
Please if you can show the work.
Answer:
Ca(OH)2 molecular weight. Molar mass of Ca(OH)2 = 74.09268 g/mol. This compound is also known as Calcium Hydroxide. Convert grams Ca(OH)2 to moles or moles Ca(OH)2 to grams. Molecular weight calculation: 40.078 + (15.9994 + 1.00794)*2 ››
Hey,
QUESTION)A) Let's first calculate the molar mass M of the molecule :
M(Ca(OH)₂) = M(Ca) + 2M(O) + 2M(H)
M(Ca(OH)₂) = 40 + 2 x 16 + 2 x 1 M(Ca(OH)₂) = 74 g/molB) Let's deduct the corresponding mass m :
m = M x n
m = 74 x 0.456 m = 33.744 g m ≈ 34,0 gThe mass of calcium hydroxide corresponding to this quantity of substance (in mol) is therefore 34 g.
Why do cations and anions form?
URGENT
What is the total volume of a lead can if it has a mass of 800g.
Answer:
750
Explanation:
What do YOU think? Is the movement to 100% renewable energy possible? Why, or why not?
Answer:
i dont know
Explanation:
ask your science teacher
Pls help match the following
Answer:
citric acid = orange
I know the answer for this only..
What is the total number of orbitals that can be found on third electron shell (n=3)? Answer with explanation
Answer:
nine orbitals
Explanation:
There are nine orbitals in the n = 3 shell. There is one orbital in the 3s subshell and three orbitals in the 3p subshell. The n = 3 shell, however, also includes 3d orbitals.
1.Which type of text structure describes events in sequential order? A.sequence B.Cause and Effect. C. Problem And Solution. D. Compare and Contrast
2.This type of writing considers similarities and differences
A.Discripsion B.Compare and Contrast C. Sequence. D.Cause and Effect
3.in this type of writing,the reader will see words/phrases such as cause,as a result of,and due to.
A.Cause and Effect
B.Promlem and Solution
C.Order And Sequence
D.Compare And Contrast
Answer:
1 would be a. sequence
2 would be b. compare and contrast
3 would be a. cause and effect
i need help please thank you
Answer:
In science, sound is defined as the transfer of energy from a vibrating object in waves that travel through matter. Most people commonly use the term sound to mean what they hear when sound waves enter their ears. The tree above generated sound waves when it fell to the ground, so it made sound according to the scientific definition
Explanation:
sound waves
How many moles are in 3.0g of A1203?
Answer:
0.065 moles
Explanation:
how would a map of a galaxy be different from a map of a city?
Answer:
A map of the galaxy would be a lot bigger and have a lot more names such as planets, stars, etc. While a city would be more basic than a whole galaxy.
UGRENT! Please help showing all work
Answer:
a. The limiting reactant is Ca(OH)₂
b. The theoretical yield of CaCl₂ is approximately 621.488 grams
c. The percentage yield of CaCl₂ is approximately 47.06%
Explanation:
a. The given chemical reaction is presented as follows;
Ca(OH)₂ + 2HCl → CaCl₂ + 2H₂O
Therefore;
One mole of Ca(OH)₂ reacts with two moles of HCl to produce one mole of CaCl₂ and two moles of water H₂O
The mass of HCl in an experiment, m₁ = 229.70 g
The mass of Ca(OH)₂ in an experiment, m₂ = 207.48 g
The molar mass of HCl, MM₁ = 36.458 g/mol
The molar mass of Ca(OH)₂, MM₂ =74.093 g/mol
The number of moles of HCl, present, n₁ = m₁/MM₁
∴ n₁ = m₁/MM₁ = 229.70 g/(36.458 g/mol) ≈ 6.3 moles
The number of moles of Ca(OH)₂, present, n₂ = m₂/MM₂
∴ n₂ = m₂/MM₂ = 207.48 g/(74.093 g/mol) ≈ 2.8 moles
The number of moles of Ca(OH)₂, present, n₂ = 2.8 moles
According the chemical reaction equation the number of moles of HCl the 2.8 moles of Ca(OH)₂ will react with, = 2.8 × 2 moles = 5.6 moles of HCl
Therefore, there is an excess HCl in the reaction and Ca(OH)₂ is the limiting reactant
b. According the chemical reaction equation the number of moles of CaCl₂ produced in he reaction by the 2.8 moles of Ca(OH)₂ = 2.8 × 2 moles = 5.6 moles of CaCl₂
The molar mass of CaCl₂ = 110.98 g/mol
The mass of the 5.6 moles of CaCl₂ = 5.6 moles × 110.98 g/mol ≈ 621.488 grams
The theoretical yield of CaCl₂ ≈ 621.488 grams
c. Given that the actual mass of CaCl₂ produced = 292.5 grams, we have;
The percentage yield of CaCl₂ = The actual yield/(The theoretical yield) × 100
∴ The percentage yield of CaCl₂ = (292.5 g)/(621.488 g) × 100 ≈ 47.0644646397%
The percentage yield of CaCl₂ ≈ 47.06%.