Compound A has 4 moles of hydrogen, 4 moles of oxygen, and
1 moles of silicon. The empirical formula of the compound is???
In H4SiO4, the mole ratio of carbon to hydrogen to oxygen is the same as described in the question. Therefore H4SiO4 is the empirical formula
I hope this helps you!!
Suppose that you are performing a titration on a monoprotic acid. Titration of this monoprotic acid required a volume of 0.1L of the base being used. If the same volume of a diprotic acid would instead have been used (same volume of a diprotic acid versus the originally used monoprotic acid), and if we assume furthermore that the concentration of the diprotic acid and the monoprotic acids are equal, how does the volume of base required to reach the endpoint for the diprotic acid compare to the volume of base required to reach the endpoint for the monoprotic acid?
A) More base is likely required to reach the endpoint for the diprotic acid than for the monoprotic acid under these conditionsB) Less base is likely required to reach the endpoint for the diprotic acid than for the monoprotic acid. C) Exactly the same amount of base is required for both monoprotic and diprotic acids under the situations described here.D) A completely different indicator will need to be used here.
Answer: A) More base is likely required to reach the endpoint for the diprotic acid than for the monoprotic acid under these conditions
Explanation:
The monoprotic acid (HA) has a valency of 1 and diprotic acid [tex](H_2A)[/tex] has a valency of 2.
As the concentration and volume of the diprotic acid and the monoprotic acids are equal.
The neutralization reaction for monoprotic acid is:
[tex]HA+BOH\rightarrow BA+H_2O[/tex]
The neutralization reaction for diprotic acid is:
[tex]H_2A+2BOH\rightarrow B_2A+2H_2O[/tex]
Thus more number of moles of base are required for neutralization of diprotic acid and thus the volume required will be more as concentration and volume of the diprotic acid and the monoprotic acids are equal.
If the amount of dissolved solute in a solution at a given temperature is greater than the amount that can permanently remain in the solution at that temperature, the solution is said to be
a. diluted.
b. unsaturated.
c. saturated.
d. supersaturated.
that temperature is saturated.
Which event is an example of sexual reproduction in plants?
A. Pine trees produce seeds in cones.
B. Mosses form spores in capsules.
C. A kalanchoe produces plantlets on its leaves.
D. A potato has buds that can grow into new stems.
Answer:
the correct answer to your question is b
Consider the following reaction:
Mg(s) + 2 HCl (aq) → H2(g) + MgCl2(aq)
If 3.65 mol of magnesium and 3.65 mol of hydrochloric acid are reacted, how many
moles of hydrogen gas are produced?
Answer: 1.825 moles of hydrogen gas are produced.
Explanation:
The balanced chemical equation is:
[tex]Mg(s)+2HCl(aq)\rightarrow H_2(g)+MgCl_2(aq)[/tex]
According to stoichiometry :
2 moles of [tex]HCl[/tex] require = 1 mole of [tex]Mg[/tex]
Thus 3.65 moles of [tex]HCl[/tex] will require=[tex]\frac{1}{2}\times 3.65=1.825moles[/tex] of [tex]Mg[/tex]
Thus [tex]HCl[/tex] is the limiting reagent as it limits the formation of product and [tex]Mg[/tex] is the excess reagent.
As 2 moles of [tex]HCl[/tex] give = 1 mole of [tex]H_2[/tex]
Thus 3.65 moles of [tex]HCl[/tex] give =[tex]\frac{1}{2}\times 3.65=1.825moles[/tex] of [tex]H_2[/tex]
Thus 1.825 moles of hydrogen gas are produced.
Kingsley then adds 44.12 mL of NaOH to 250.00 mL of the HCOOH solution. The neutralization reaction resulted in 0.091 moles of HCOOH and 0.036 moles of HCOO- left in solution. Determine the pH of the resulting solution.
Answer:
pH = 3.34
Explanation:
We can calculate the pH using Henderson-Hasselbach's equation:
pH = pKa + log[tex]\frac{[HCOO^-]}{[HCOOH]}[/tex]for HCOOH, pKa = 3.75.
We can calculate [HCOO⁻] and [HCOOH] using the given number of moles for each one and the final volume:
Final Volume = 44.12 mL + 250 mL = 294 mL294 mL / 1000 = 0.294 L[HCOO⁻] = 0.036 mol / 0.294 L = 0.122 M[HCOOH] = 0.091 mol / 0.294 L = 0.310 MThen we proceed to calculate the pH:
pH = 3.75 + log[tex]\frac{0.122}{0.310}[/tex]pH = 3.34The pH of the resulting solution is 3.34.
Calculation of the pH of the solution:Since
Final Volume = 44.12 mL + 250 mL = 294 mL
Now
= 294 mL / 1000
= 0.294 L
Now
[HCOO⁻] = 0.036 mol / 0.294 L = 0.122 M
[HCOOH] = 0.091 mol / 0.294 L = 0.310 M
So, the pH should be
= 3.75 + log0.122/0.310
= 3.34
hence, The pH of the resulting solution is 3.34.
learn more about reaction here: https://brainly.com/question/20874611
A brick has a mass of and the Earth has a mass of . Use this information to answer the questions below. Be sure your answers have the correct number of significant digits. What is the mass of 1 mole of bricks? Round your answer to 2 significant digits. How many moles of bricks have a mass equal to the mass of the Earth? Round your answer to 2 significant digits.
The given question is incomplete. The complete question is:
A brick has a mass of 4.0 kg and the earth has a mass of [tex]6.0\times 10^{27}g[/tex] Use this information to answer the questions below. Be sure your answers have the correct number of significant digits. What is the mass of 1 mole of bricks? Round your answer to 2 significant digits. How many moles of bricks have a mass equal to the mass of the Earth? Round your answer to 2 significant digits.
Answer: The mass of 1 mole of bricks is [tex]2.4\times 10^{27}g[/tex]
2.5 moles of bricks have a mass equal to the mass of the Earth
Explanation:
According to avogadro's law, 1 mole of every substance weighs equal to its molecular mass and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
Mass of 1 brick = 4.0 kg = 4000 g (1kg=1000g)
Thus mass of 1 mole of brick or [tex]6.023\times 10^{23}[/tex] bricks will be = [tex]\frac{4000g}{1}\times 6.023\times 10^{23}=2.4\times 10^{27}g[/tex]
The mass of 1 mole of bricks is [tex]2.4\times 10^{27}g[/tex]
Now [tex]2.4\times 10^{27}g[/tex] will correspond to = 1 mole of bricks
[tex]6.0\times 10^{27}g[/tex] will correspond to =[tex]\frac{1}{2.4\times 10^{27}}\times 6.0\times 10^{27}=2.5moles[/tex]
2.5 moles of bricks have a mass equal to the mass of the Earth
Food is taken in and broken down by the _______ system. The raw materials are then transported throughout the body by the _______ system.
A. nervous; skin
B. respiratory; circulatory
C. digestive; circulatory
D. digestive; skin
Answer:
C. digestive; circulatory
Explanation:
It is the correct answer..
evaluate {(7.8)^2-(2.2^2
Answer:
56
Hope this helps :)
WBCS are often called soldier of the body why
Answer:
White blood cells are cells of the system, which play a neighborhood in protecting the body against infectious diseases and foreign bodies. These cells flow with the blood throughout the body then scavenge and kill the parasites and foreign bodies. Hence, they are called soldiers of the body.
I hope it's helpful!
¿The presence of which atmospheric condition will most likely result in clear skies in Binghamton, New York?
Answer:
Most Likely A High Pressure Center
Explanation:
is most likely high pressure Center because on a weather map over the southern western Pennsylvania there's mostly high pressure over there. The descending air diverges and spreads out from the center and their is a Coriolis effect which causes the Diverging air to rotate in a clockwise direction.
Facilitated diffusion moves large molecules through ________.
The diffusion of solutes through transport proteins in the plasma membrane is referred to as facilitated diffusion. Passive transport is a subset of facilitated diffusion. Facilitated diffusion is still passive transport even though it uses transport proteins.
In contrast to passive diffusion, assisted diffusion does not result in the carried molecules dissolving in the phospholipid bilayer. Proteins instead allow the delivered molecules to pass through the membrane without coming into contact with its hydrophobic interior.
Materials move across the plasma membrane with the aid of membrane proteins during facilitated transport, also known as facilitated diffusion.
To know more about Facilitated diffusion, visit;
https://brainly.com/question/14852229
#SPJ6
aluminum and hydrochloric acid reaction type
Answer:
redox reaction
Explanation:
:D
Answer:
The reaction between metallic aluminum and hydrochloric acid is what is known as an oxidation-reduction reaction or redox reaction. Both oxidation and reduction take place simultaneously.
What is the result of wave motion on water particles?
A. Water particles barely move forward; they move in a circular pattern.
B. Water particles barely move forward as they move up and down.
C. Water particles are pushed forward as they move up and down.
D. Water particles are pushed down as they move side to side.
Answer:
A. Water particles barely move forward; they move in a circular pattern.
Answer:
For k-12 its:
Explanation:
Water particles barely move forward; they move in a circular pattern.
^^
Calculate the volume of 5.0 grams of NO gas at STP.
Answer:
The volume of 5.0 g CO 2 is 2.6 L CO 2 at STP
Explanation:
STP
STP is currently
0
∘
C
or
273.15 K
, which are equal, though the Kelvin temperature scale is used for gas laws; and pressure is
10
5
.
Pascals (Pa)
, but most people use
100 kPa
, which is equal to
10
5
.
Pa
.
You will use the ideal gas law to answer this question. Its formula is:
P
V
=
n
R
T
,
where
P
is pressure,
V
is volume,
n
is moles,
R
is a gas constant, and
T
is temperature in Kelvins.
Determine moles
You may have noticed that the equation requires moles
(
n
)
, but you have been given the mass of
CO
2
. To determine moles, you multiply the given mass by the inverse of the molar mass of
CO
2
, which is
44.009 g/mol
.
5.0
g CO
2
×
1
mol CO
2
44.009
g CO
2
=
0.1136 mol CO
2
Organize your data
.
Given/Known
P
=
100 kPa
n
=
0.1136 mol
R
=
8.3145 L kPa K
−
1
mol
−
1
https://en.wikipedia.org/wiki/Gas_constant
T
=
273.15 K
Unknown:
V
Solve for volume using the ideal gas law.
Rearrange the formula to isolate
V
. Insert your data into the equation and solve.
V
=
n
R
T
P
V
=
0.1136
mol
×
8.3145
.
L
kPa
K
−
1
mol
−
1
×
273.15
K
100
kPa
=
2.6 L CO
2
rounded to two significant figures due to
5.0 g
Answer link
Doc048
May 18, 2017
I got 2.55 Liters
Explanation:
1 mole of any gas at STP = 22.4 Liters
5
g
C
O
2
(
g
)
=
5
g
44
(
g
mole
)
=
0.114
mole
C
O
2
(
g
)
Volume of 0.114 mole
C
O
2
(
g
)
= (0.114 mole)(22.4 L/mole) = 2.55 Liters
C
O
2
(g) at STP
the reaction that takes place in chemical cell is best classified as. A.fusion B.redox C.transmutation D.redox
The reaction in the chemical cell has been best classified as the redox reaction. Thus, option B is correct.
The reaction cell or the voltaic cell has been the one that has been able to convert electrical energy into chemical energy. In the chemical cell, electrical energy has been provided to the cell for bringing the chemical change.
The chemical change has been brought by the oxidation and reduction of the elements with the application of electric current. The reaction that has been based on the oxidation and reduction of the elements has been termed the redox reaction.
Thus, the reaction in the chemical cell has been best classified as the redox reaction. Thus, option B is correct.
For more information about the chemical cell, refer to the link:
https://brainly.com/question/995105
Q: How does the starting
position affect the speed of a
ball rolling down a ramp?
I NEED HELPP PLSSS ASAP!!!
The force of gravity points straight down, but a ball rolling down a ramp doesn't go straight down, it follows the ramp. Therefore, only the component of the gravitational force which points along the direction of the ball's motion can accelerate the ball. The other component pushes the ball into the ramp, and the ramp pushes back, so there is no acceleration of the ball into the ramp. If the ramp is horizontal, then the ball does not accelerate, as gravity pushes the ball into the ramp and not along the surface of the ramp. If the ramp is vertical, the ball just drops with acceleration due to gravity. These arguments are changed a bit by the fact that the ball is rolling and not sliding, but that only affects the magnitude of the acceleration but not the fact that it increases with ramp steepness.
Calculate the molarity of a solution of monoprotic KHP prepared by mixing a 0.5237 g KHP in 50.0 mL of water .
Answer:
[tex]M=0.0513M[/tex]
Explanation:
Hello!
In this case, since the molarity of a solution is computed by dividing the moles of solute by the volume of solution, we notice we first need the moles of KHP as shown below:
[tex]n=0.5237g*\frac{1mol}{204.22 g} =0.00256mol[/tex]
Next, the volume in liters:
[tex]V=50.0mL*\frac{1L}{1000mL}\\\\V=0.0500L[/tex]
Thus, the molarity turns out to be:
[tex]M=\frac{n}{V}\\\\M=\frac{0.00256mol}{0.05000L} \\\\M=0.0513M[/tex]
Best regards!
What is the skin's natural oil?
a. sweet
b. Melanin
c. sebum
d. vegetable oil
help
Answer:
C. Sebum
Explanation:
C. Sebum
Mixing hydrochloric acid (HCl) and aqueous calcium hydroxide produces water and aqueous Calcium Chloride. Write the complete and net ionic equations
Answer:
HCI+Ca(OH)2
Explanation:
= Br
= C
Name is
1
, formula is
Answer:
yqujsbr
Explanation:
hejsudh2ihdg4 they t sjh5c4uSvreju5 aur bd84kskythddok6vr for
Hello! Can someone tell me how fans function and work? And what fans do? Ill include an imagine below! Best answer gets brainliest
Answer:
How fans work....Instead of sucking in hot air and pushing it down, the fan sucks up cool air and pushes it higher. When the fan forces cool air higher, the cool air forces warm air down. Instead of giving you more access to cool air in your room, the fan gives you more access to the warm air, making you feel nice and cozy.
What fans do....A fan, or a breeze, helps by replacing this hot, humid air with cooler, drier air that allows for more evaporation. Similarly, even without sweat, our body loses heat to the surrounding air simply by convection. ... The breeze from the fan carries that hot air away and perpetuates the process, effectively cooling you off.
Explanation:
True or false atoms are the smallest particle of an element that have that elements properties
Answer:false
Explanation:false
Answer:
true
Explanation:
hoping for the brainliest
g Imagine that you found a piece of carved wood that has been embedded in glacial ice. The mass of the wood is 50 grams, and 30% of the mass is carbon. The 14C/12C ratio of the wood was measured by mass spectrometry, and found to be 20 % of the 14C/12C ratio found in CO2 in modern air. You may assume that the half life of 14C is 5700 years. Which is the best estimate of the age of the wood
Answer:
13414 years
Explanation:
From;
0.693/ t1/2 = 2.303/t log No/N
t1/2 = half life of C-14
t = age of the sample
No= initial amount of C-14
N = present amount of C-14
From the question, N = 0.2 No
Hence;
0.693/5700 = 2.303/t log No/0.2No
1.2 * 10^-4 = 2.303/t log 1/0.2
1.2 * 10^-4 = 1.6097/t
t = 1.6097/1.2 * 10^-4
t = 13414 years
5. Based on Reference Table F, which of the following saturated solutions would be the least concentrated?
1) copper (II) sulfate 2) barium sulfate
3) sodium sulfate 4) potassium sulfate
Answer:
barium sulfate
Explanation:
If you are given 720.00 Grams of Oxygen how many moles of Oxygen will you have?
Answer:
720 divided by 2 answer is 556 so answer per is 3.32.3
Explanation:
Looking across period 4 of the periodic table, potassium (atomic number 19) is followed by calcium (atomic number 20), which is followed by scandium (atomic number 21). Which element should have the largest atomic radius?
i need help with this please
Answer:
owa owa owa owa
Explanation:
owa owa owa owa owa owa owa
Which change to this process would shift the equilibrium to produce the
maximum possible amount of S03?
2502 +02 2503 + energy
A. Increasing the temperature
B. Decreasing the pressure
C. Removing the O2 as it forms
D. Removing the SO3 as it forms
The change which shift the equilibrium to produce the maximum possible amount of SO₃ is decreasing the temperature.
What is equilibrium principle?According to this principle if any external stress is applied in the equilibrium state then equilibrium will shift towards that side where the external stress will decreases.
In the given chemical equation energy is releases in the form of heat, then in this condition:
Increase in temp will shift the reaction towards the reactant side.Decreasing the pressure will also lead to the decrease in the temperature and in this condition reaction will shift towards product side and will increases the amount of SO₃.Removing the oxygen and SO₃ will not help in increasing the amount of SO₃.Hence decreasing the temperature will produce maximum SO₃.
To know more about equilibrium law, visit the below link:
https://brainly.com/question/13414142
#SPJ2
"How many grams of CaCl2 would be dissolved in 1.0 L of a 0.10 M solution of CaCl2? "
Answer:
2365 g
Explanation:
The mass of CaCl₂ will be 110.98 grams, this can be calculated by using the molarity formula.
MolarityIt is defined as the ratio of a number of moles of solute to the volume of solution in liters.
It is given by:
M= n/V
What information do we have?
V= 1.0 L
M= 1.0 M
Molar mass of CaCl₂ = 110.98g/mol
To find:
m=?
M= n/V
n= M/V
n= 1 mole
A Number of moles is the ratio of mass over the molar mass.
n = m/ M
1 mole= m / 110.98 g/mol
m= 110.98 grams
Thus, the mass of calcium chloride is 110.98 grams.
Find more information about Molarity here:
brainly.com/question/17138838