Answer:
9758 how many significant figures
A 1500 kg car traveling 5.0 m/s collides head on with a 3000 kg truck traveling
7.0 m/s in the opposite direction. If the bumpers lock. What is the velocity of the
two vehicles together immediately following the collision?
Using law of conservation of momentum
[tex]\\ \sf\Rrightarrow m_1v_1-m_2v_2=(m1+m2)v_3[/tex]
[tex]\\ \sf\Rrightarrow 1500(5)-3000(7)=(1500+3000)v_3[/tex]
[tex]\\ \sf\Rrightarrow 7500-21000=4500v_3[/tex]
[tex]\\ \sf\Rrightarrow -13500=4500v_3[/tex]
[tex]\\ \sf\Rrightarrow v_3=-3m/s[/tex]
Connor rode an inner tube down a river. For 4.6 minutes, he moved downriver at 15 meters per minute. During this time, how far did he move?
Answer:
2 miles
Explanation:
. a. Calculate the work done while lifting 300 kg of wate through a vertical height of 6 m. (Assume g = 10 m a =
Answer:
potential energy = mgh = 300 × 10 × 6m = 18000 joule or 18 kilo joule.
Explanation:
What do you feel when you receive your homework?
The feeling can either be positive or negative.
How one feels depends on number of factorsA positive feeling can occur when one performs very well in the given home. Also, a positive feeling can come from a high level of satisfaction in the homework. When you complete your homework on time using the recommended steps, you will be sure to do well on the homework.
In other hand, a negative feeling may result from poor performance in the homework. In ability to complete the homework or missing some steps in the homework can increase your level of trepidation even before seeing your score.
Learn more about homework here: https://brainly.com/question/21380057
what is the electric field strength at a distance of .50 m from a 1.00x10^-6 c charge?
Answer:
e = k q / r² then,
e = 9×10^9 * 1×10^-6 / 50² = 3.6 N/C
hope this helps ❤.
General kinematics problem.
"Anna is returning from vacation driving down the Sunshine Highway. She travels for a stretch (SA) at a speed of 110 km/h. Then, due to an increase in traffic, Anna is forced to reduce her speed by travelling the second part of the journey (SB) at 60 km/h. The total distance and duration of the trip are 350 km and 4.0 hours respectively.
-> Calculate the time intervals needed to travel SA and SB
-> Calculate the distances covered in the two sections SA and SB".
The results I should get by doing the exercise are in the attached picture.
If you could explain the various steps in the problem you would be doing me a huge favor. Thanks!
Explanation:
What we know:
Sa + Sb = 350 km
Ta + Tb = 4h
S = Vt
With these equations above we can write a system of equations and find Tb, as you see in the picture(s).
After having Tb you can easily find Ta and then Sa and Sb. Hopefully it was clear.
Stewart (70 Kg) is attracted to Ms. Little (60 Kg) who sits 2 m away. What is the gravitational attraction between them? G=6.67×10^-11 (-11 is an exponent)
Happy Holidays!
We can use the following equation to solve for the gravitational force:
[tex]\large\boxed{F_g = G\frac{m_1m_2}{r^2}}[/tex]
Fg = force due to gravity (N)
G = Gravitational constant
m1,m2 = masses of the objects (kg)
r = distance between the objects (m)
Plug in the given values into the equation:
[tex]F_g = (6.67*10^{-11})\frac{(70)(60)}{(2)^2}} = \boxed{7.0 * 10^{-8}N}[/tex]
How do you find the final velocity of two objects colliding when you only have the mass and initial velocity of both objects
Answer:
We are required to analyze the conservation of kinetic energy in a perfectly inelastic collision.
kinetic energy:K=1/2mv²
momentum:p=mv
Explanation:
Using the equations for final velocity in terms of masses and initial velocity for a perfectly inelastic collision, work out the final kinetic energy. Calculate the initial kinetic energy and show that kinetic energy is not conserved. Use variables, no numbers
You need to follow law of conservation of energy
Energy is neither created nor destroyedWe know
Kinetic Energy=mass(Velocity)^2You may use momentum formula mass×velocity
In both you need to form equations then solve for final velocity
What are the rest of the blanks?
according to newton's third law, of a sledgehammer hits a wall with a force of 1000 n, how much force does the wall hit the sledgehammer? a - 1000 n b 1000 n c 0 n d 500 n
The correct option is A: the force exerted on the wall by the sledgehammer is - 1000 N
Newton's third lawNewton's third law of motion states that for every action or force, there is an equal but oppositely directed force.
Application of the newton's third lawForce with which the sledgehammer hits the wall = 1000 N
From the Newton's third law, an equal but oppositely directed force is exerted on the sledgehammer by the wall.Thus, the force exerted by the sledgehammer on the wall = -1000 N
The negative sign indicates that the force acts in a direction opposite to that of the sledgehammer.Thus, the correct option is A: the force exerted on the wall by the sledgehammer is - 1000 N
Learn more about Newton's third law and force at: https://brainly.com/question/13874955
how to tell a girl you like her?
If the western component of the wind is half of the south, what is the angle of the wind with the south?
Answer this question in details!
Answer is 26.57 or tan^-1 (1/2) or cot^-1 (2)
no links !
Answer:
This above a triangle that models our situation.
Explanation:
We have a two componens., since we have a western componet and southern component. One travel in a southern direction. and the other travel in the west.
Let the component that travel in the south be the length of a.
According to the problem, the westard component is half of that so let that length be a/2.
Now we must find the angle of the wind in the South.
This means that what is angle that is opposite of the western componet because that angle is the most southward angle. So know we apply the tan property.
[tex] \tan(x) = \frac{opp}{adj} [/tex]
Our side opposite of the angle we trying to find is the western component and the side adjacent to it is the southern component. Also remeber since western and Southern negative displacements, we have
[tex] \tan(x) = \frac{ - \frac{a}{2} }{ - a} [/tex]
[tex] \tan(x) = - \frac{a}{2} \times - \frac{1}{a} = \frac{1}{2} [/tex]
Now we take the arctan or inverse tan of 1/2.
[tex] \tan {}^{ - 1} ( \frac{1}{2} ) = 26.57[/tex]
Based on the information about vector components and graph provided, the angle of the wind with the south is 26.57°.
What are the values of the western and southern component of the wind?The western and southern component have a negative displacement as shown in the graph.
Let the southern component be -x
The western component is half of -x = -x/2
What is the angle of the wind with the South?Since the angle is with the south, the trigonometric ratio to be used to find the angle is:
Tan θ = opp/adjTan θ = -×/2 /-x
Tan θ = 1/2
θ = tan^-1(0.5)
θ = 26.6°
Therefore, angle of the wind with the south is 26.57°.
Learn more about about vector components at: https://brainly.com/question/8043832
Annie comes to a sudden stop to avoid hitting a deer crossing the road at night. As she hits the breaks, her speed drops from 12 m/s to zero in 1.5 seconds.(p1) How far did she travel during that time? (p2)What was her average acceleration?
Distance(p1)
9 m
8 m
10 m
13.5 m
Acceleration(p2)
6 m/s2
8 m/s2
12 m/s2
16 m/s2
Answer:
1. around 22m
Explanation:
Annie traveled 9 meters during that time. Her average acceleration was -8 m/s².
Annie's initial speed was 12 m/s.
Her final speed was 0 m/s.
The time it took her to stop was 1.5 seconds.
Therefore, the distance she traveled during that time is:
distance = (initial speed + final speed)/2 * time
= (12 m/s + 0 m/s)/2 * 1.5 seconds
= 9 meters
Annie's average acceleration is calculated by dividing her change in velocity by time it took for that change to occur.
In this case, her change in velocity is from 12 m/s to 0 m/s, which is a decrease of 12 m/s.
The time it took for this change to occur is 1.5 seconds.
Therefore, Annie's average acceleration is:
acceleration = change in velocity / time
= -12 m/s / 1.5 seconds
= -8 m/s²
The negative sign indicates that Annie was slowing down.
To learn more about Acceleration, here
https://brainly.com/question/12550364
#SPJ3
Your father bought you a pair of shoes. When you wore the shoes you realized there was a problem. The shoes were too long. Why might such prblm arise and how can it be mitigated?
Please answer it soon as possible
Answer: This problem may arise when your father never bought a shoe before. A male is bad at buying accesories and guessing the size, so the mother should have bought a pair of shoes. Or it can also be that your father has a short term memory or that he never knew the size of your feets. The feet might also have irregular growth for which it grows more than the normal size but such cases are rare to be seen.
You can prevent this by going with your father and selecting the shoe of your size. Or you can simply send your mother to buy it for you instead. Or another perfect choice could be is that you just dont ever send your father to buy anything for you or just never buy a pair of shoes. Wear the shoes that you always did or buy it yourself since your the one who is supposed to know the size of your feets. Another possible solution could be that you can make use of the money by gifitng them to someone close to you.
PLEASE HELP MEEEEE 80 points on the line and i need this done
Answer:
5) A 200n
F net=0n
6) B 50n
F net=0n
7) C 200n
F net= 900n, up
8) D 80n
F net=60n,left
9) E 300n
F net=60n,left
10)???
11) G 20n
F net=30n,Right
__________________________________
All the answers is hard
correct me if i'm wrong
What’s the physics of a football
Answer:
There are many forces involved in the game of football. These are: Force of Gravity, Normal Force, Force of Friction, and Applied Force. Force of Gravity applies to football when the football is thrown or kicked, when a player jumps in the air to avoid a tackle or catch a ball, and is constantly being applied.
Explanation:
How physics is used in football?
When you throw a football across the yard to your friend, you are using physics. You make adjustments for all the factors, such as distance, wind and the weight of the ball. The farther away your friend is, the harder you have to throw the ball, or the steeper the angle of your throw.
The following data were collected during a short race between two friends. Velocity (m/s) 0 0.5 1 1.5 2 2 4 6 2 0 Time (s) 0 2 4 6 8 10 12 14 16 18 a) Describe the different sections of the graph. b) Determine the acceleration over the first eight seconds. c) Determine the maximum acceleration. d) Using the graph calculate the displacement: i) over the first eight seconds ii) the total race. e) Find the maximum velocity reached by the runner.
The characteristics of the kinematics allow to find the results for the questions about the movement of the body are:
a) we have four sections;
0 to 8 s The body is accelerating. 8 to 10 s The body goes at a constant speed, the acceleration is zero. 10 to 14 Body accelerating. 14 to 18 Body slowing down.b) The acceleration is the first 8 s is: a = 0.25 m / s²
c) The maximum acceleration is: a = 1 m / s²
d) The displacement is: i) d₁ = 8m, ii) [tex]d_{total}[/tex]= 16 m
e) maximum speed is: v = 6 m / s
Kinematics studies the movement of bodies by finding relationships between the position, speed and acceleration of bodies.
v = v₀ + a t
y = v₀ t + ½ a t²
where v and v₀ is the current and initial velocity, respectively, a is the acceleration and t is time.
In many circumstances graphs are made for their analysis, in a graph of speed versus time when we have a horizontal line the speed is constant, the acceleration is zero and in the case of a slope there is an acceleration, we have two cases:
Positive slope the body is accelerating and the speed is increasing. Negative slope the body is stopping, the speed decreases.
Let's answer the different questions about the system.
a) in the attached we have a graph of the velocity versus time, each section corresponds to a change in the slope of the graph, we have four sections;
0 to 8 s The body is accelerating. 8 to 10 s The body goes at a constant speed, the acceleration is zero. 10 to 14 Body accelerating. 14 to 18 Body slowing down.
b) The acceleration is the first 8 s
v = v₀ + a t
[tex]a = \frac{v-v_o}{\Delta t}[/tex]
[tex]a = \frac{2-0}{8-0}[/tex]
a = 0.25 m / s²
c) The maximum acceleration is when the slope is maximum.
[tex]a = \frac{6-2}{ 14-10}[/tex]
a = 1 m / s²
Therefore the acceleration is maximum in the section between 10 and 14 s
d) The total displacement is the sum of the displacements of each section.
[tex]d_{total } = d_1 +d_2 + d_3 +d_4[/tex]
We look for every displacement.
d₁ = v₀ + ½ a₁ Δt²
d₁ = 0 + ½ 0.25 8²
d₁ = 8 m
In the second section the velocity is constant
d₂ = v₂ Δt₂
d₂ = 2 (10-8)
d₂ = 4 m
The third section.
d₃ = v₀ + ½ a t²
d₃ = 2 + ½ 1 (14-10) ²
d₃ = 10 m
The distance of the fourth section.
we look for acceleration
a₄ = [tex]\frac{v-v_o}{\Delta t}[/tex]
a₄ = [tex]\frac{0-6}{18-14}[/tex]
a₄ = -1.5 m / s²
d₄ = 6 + ½ (-1.5) (1814) ²
d₄ = -6 m
The total displacement is;
[tex]d_{total}[/tex] = 8 + 4 + 10 -6
[tex]d_{total}[/tex] = 16 m
e) The maximum speed is the highest point in the graph of speed versus time that in the attachment we can see corresponds to
v = 6 m / s
In conclusion using the characteristics of kinematics we can find the results for the questions about the motion of bodies are:
a) we have four sections;
0 to 8 s The body is accelerating. 8 to 10 s The body goes at a constant speed, the acceleration is zero. 10 to 14 Body accelerating. 14 to 18 Body slowing down.b) The acceleration is the first 8 s is: a = 0.25 m / s²
c) The maximum acceleration is: a = 1 m / s²
d) The displacement is: i) d₁ = 8m, ii) [tex]d_{total}[/tex]= 16 m
e) maximum speed is: v = 6 m / s
Learn more about kinematics here: brainly.com/question/24783036
when a rigid body rotates about a fixed axis, all the points in the body have the same
Hi there!
[tex]\large\boxed{\text{Angular acceleration.}}[/tex]
For a rigid body rotating about a fixed axis, its angular characteristics ⇒ angular acceleration and velocity are constant throughout.
However, its LINEAR velocities/accelerations differ because of the following relationships:
v = ωr
a = αr
Thus, a point closer to the axis of rotation has a smaller linear velocity or acceleration compared to a point along the edge.
What event will produce the greatest increase in the gravitational force between the two masses?
Question 5 options:
Doubling the distance between the masses
Reducing the small mass by half
Doubling the large mass
Reducing the distance between the masses by half
Answer:
Doubling the large mass
Explanation:
By doubling the mass you will get more gravational force
Which shows the weight of an atom?
atomic mass
atomic number
chemical symbol
none of the above
Answer:
Atomic mass
Explanation:
Answer:
atomic mass
Click thanks if thankc if this helped
Which of the following industries is the largest producer of primary air pollutants in the United States?
The largest producer of primary air pollution in the United States is what? electricity producing plants.
Answer:
electricity production
Explanation:
HELPPP PLEASE
1) if the distance between two masses are 15 meters and the masses are 350kg and 492 kg
respectively; what is the magnitude of gravitational force?
Answer:
-8
5.092×10
Explanation:
given,
distance (d) =15m
mass (M1) =350kg
mass(M2) = 492kg
Gravitational constant (G)=6.67×10^-11
we know,
gravitational force=(Gm1m2)÷d^2
=(6.67×10^-11×350×492)÷15^2
= (1.14857×10^-5)÷225
= 5.092×10^-8
which is the hottest and coldest planet in solar system ?
Answer:
hottest plant: vensus, close to the sun
coldest plant: Neptune, farthest from the sun
Explanation:
An automobile with a mass of 1250 kg accelerates at a rate of 4 m/sec2 in the forward direction. What is the net force acting on the automobile?
[tex]\large{\underline{\underline{\maltese{\pink{\pmb{\sf{ \; Question \; :- }}}}}}}[/tex]
An automobile with a mass of 1250 kg accelerates at a rate of 4 m/sec² in the forward direction. What is the net force acting on the automobile?
_________________________________________
[tex]\large{\underline{\underline{\maltese{\green{\pmb{\sf{ \; Given\; :- }}}}}}}[/tex]
➢ Mass of the automobile = 1250 kg➢ Acceleration of the body = 4m/sec²_________________________________________
[tex]\large{\underline{\underline{\maltese{\orange{\pmb{\sf{ \; To \: Find \; :- }}}}}}}[/tex]
Net force acting on the automobile = ?_________________________________________
[tex]\large{\underline{\underline{ \bigstar{{\pmb{\sf{ \; Concept \: and \: Formula \: Used \; :- }}}}}}}[/tex]
➯ Force is defined as the product of the mass of the body and its acceleration.
[tex] \bigstar \: \small{ \fbox {\textsf {\textbf{F = ma}}}}[/tex]
Where :
F = Force m = Mass of the bodya = acceleration due to gravity[tex]\large{\underline{\underline{ \bigstar{{\pmb{\sf{ \; Substituting \: the\: Given\: Values :- }}}}}}}[/tex]
[tex]⇝ \: \: \small \textsf {\textbf{ F = (1250 × 4) N }}[/tex]
[tex]⇝ \: \: \small \textsf {\textbf{ F = 5000 N }}[/tex]
[tex]\large{\underline{\underline{ \bigstar{{\pmb{\sf{ \; Therefore \; :- }}}}}}}[/tex]
❝ The net force acting on the automobile is 5000 N. ❞
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Which branch of science deals with the study of the structures shown here?
FISH
AMPHIBIAN
REPTILE
BIRD?
Answer:
Vertebrate zoology
Explanation:
Have a great day!
How does NaOH form a basic solution when it dissolves in water
When NaOH is added to water, it separates into Na+ and OH-. The hydroxyls make it more basic.
What is basic solution?A basic solution is an aqueous solution containing more OH⁻ ions than H⁺ ions.
When NaOH as a solute is mixed into the solvent like water, it separates NaOH into Na+ and OH-. The sodium ions Na⁺ have little effect on the solution, but the hydroxyls OH⁻ ions makes the solution more basic.
Thus, NaOH form a basic solution by the presence of OH⁻ ions into it.
Learn more about basic solution.
https://brainly.com/question/3595168
#SPJ2
Which of the following devices can be red to produce both transverse and
longitudinal waves?
1o) a string
(b) a ripple tank
(c) a helical spring (Slinky (d) a tuning fork
Answer:
Slinky is the correct answer.
_____________ is the study of movement in athletes. A. Sports biomechanics B. Posture C. Dynamics D. Anatomy
Answer:
I believe its A: Sports biomechanics.
a 10 mh inductor is connected in series with a 10 ohm resistor, a switch and a 6 v battery. what is the time constant of the circuit
Answer:
The inductive time constant is just T = L / R
T = 10E-3 henry/ 10 ohm = 10E-2 sec = .1 sec
(.01 / 10 = .1)
2. A nutty professor leaves a history classroom and walks 10. meters north to a drinking fountain. Then, in a daze, she turns and walks 30. meters south to an art classroom. (draw vectors to scale to show your work)
(a) What is the professor’s total displacement from the classroom to the art classroom?
(b) What was the total distance she traveled?
Total displacement:-
[tex]\\ \sf\Rrightarrow 10-30=20m[/tex]
Total distance
[tex]\\ \sf\Rrightarrow 10+30=40m[/tex]