This states that charge cannot be created or destroyed. However, a charge can be transferred from one object to other

Answers

Answer 1

The conservation of charge states that charge cannot be created or destroyed, but can be transferred between objects.

How does the conservation of charge affect the behavior of electric circuits?

The conservation of charge states that charge cannot be created or destroyed, it can only be transferred from one object to another. This principle affects the behavior of electric circuits by ensuring that the total charge in a closed circuit remains constant. This means that the charge flowing into a circuit must equal the charge flowing out of the circuit. If there is an imbalance, the circuit will not function properly.

The conservation of charge also helps to explain the behavior of electric charges in different types of circuits, such as series and parallel circuits.

To know more about Electric Circuits visit:

brainly.com/question/29032441

#SPJ4


Related Questions

a pharmacy technician measures the mass of a pill. the mass of one pill is . what is the mass in kilograms of pills? write your answer as a decimal.

Answers

The mass of one pill measured was 461 mg and for the same pill, the mass in kilograms of 100 pills will result to 46l*100/100000 => 0.046l kg.  As there are 1 ms = 10^-5 kg.

What is a pharmacy technician? A pharmacy technician is a person in pharma who decides the composition of the chemicals in medicine and the size of medicine from manufacturing.

The mass of one pill is given as 461 mg and the number of pills required is 100So the total mass will be, mass of 1 pill*100 = 461 mg × 100 = 46100mg

one kilogram = 1000 grams, so the mass in kilograms will be, The same mass in kg will be 46100mg / 1000 grams

which results in 0.046l kg.

This simply shows, the mass of 1 pill was 461 mg the mass in kilograms of 100 pills will be 0.046l kg for measurements of the mass in kg of a pill.

Learn more about pharmacy technicians: https://brainly.com/question/16934052

#SPJ4

1. Two uncharged metal balls, X and Y, each stand on a glass rod and are touching.

2. A third ball carrying a negative charge, is brought near the first two.

3. While the positions of these balls are fixed, ball X is connected to ground.

4. Then the ground wire is disconnected.

5. While X and Y remain in touch, the ball carring the negative charge is removed.

6. Then ball X and Y are separated.


After these procedures, what are the signs of the charge qX on X and qY on Y?

Answers

The signs of the charge qX on X is positive and qY on Y is positive after ball carrying the negative charge is removed and the balls X and Y are separated.

At the time when the third ball carrying a negative charge is brought near the first two, it gets polarized such that X contains +ve charge and Y contains a +ve charge.  After this the ball X is connected to the ground when  the positions of these balls are fixed and the electron move up from the ground. After that the ground wire should be disconnected. The ball carrying the negative charge is removed and the ball X and Y are separated. Due to this the electron has cancelled the net +ve charge on Y. Hence the charge on both X and Y is positive.

To learn more about charge click here https://brainly.com/question/11944606

#SPJ4

a flat square sheet of thin aluminum foil, 25 cm on a side, carries a uniformly distributed 275 nc charge. what, approximately, is the electric field a. 1.0 cm above the center of the sheet and b. 15 m above the center of the sheet?

Answers

A) The electric field at 1.0 cm above the center of the sheet is 2.5 × 10⁵ N/C, B) the electric field 15 m above the center of the sheet is 11 N/C.

Side of the square sheet, l =25 cm = 0.25 m

Uniformly distributed charge, Q = 275 × 10⁻⁹ C

ε₀ = 8.8 × 10⁻¹²

a) When close to the sheet, we assume it as an infinite sheet, So,

E = σ/2ε₀,

σ = Q/l²

E = Q/(2ε₀l²)

E = (275 × 10⁻⁹)/(2×8.8 × 10⁻¹²×0.25²)

E = 2.5 × 10⁵ N/C

B) When far from the sheet, we assume it as a point charge, if R = 15 m

E = Q/(4πε₀R²)

E = (275 × 10⁻⁹)/(4π×8.8 × 10⁻¹²× 15²)

E = 11 N/C

To know more about electric field, here

https://brainly.com/question/15800304

#SPJ4

a 8.4 kg object is on mars, where the gravitational field strength is 3.7 n/kg. what is the object's weight in newtons?

Answers

31.08 N will be the weight of that object on mars which has a mass of 8.4 kg as the gravitational field strength is 3.7 n/kg on Mars.

As we know that weight is nothing just force a body exerts on the surface so in a similar way the weight will be mass* acceleration due to the planet(Mars in this case) (g) which is 3.7 n/kg given. So

W = mass* g

w = 8.4 * 3.7 => 31.08N

Each planet has different gravitational field strength that we call (g) in the case of earth it is calculated as 9.8 n/kg but generally, we take as 10 n/kg for simplifying the calculation, and Mars has 3.7 n/kg and moon has as just 1.4 n/kg.

Learn more about gravitational field strength: https://brainly.com/question/29433658

#SPJ4

during volleyball practice a volleyball is tossed over a net, starting from a height of 1.5 meters above the ground. after reaching the top of its trajectory it returns to its original height as it falls. how does the motion of the ball at the top of its trajectory compare to its motion as it passes its original height?

Answers

When a volleyball is tossed over a net, starting from a height of 1.5 meters above the ground, where  after reaching the top of its trajectory it returns to its original height as it falls, the ball's speed is the same as when it was tossed, but its velocity is different.

As ball 1 gets to the top of its trajectory, its velocity becomes zero.

since not stated otherwise, we assume that both balls have the same properties

If ball 2 is released at this instance, then they both will travel down at the same time interval and have initial velocity as zero.

since vertical travel is downwards, then acceleration due to gravity g is positive for both balls.

Learn more about velocity:

brainly.com/question/29519833

#SPJ4

four charges are at the corners of a square, with b and c on oppositecorners. charges a and d, on the other two corners, have equal charge, while both b and c have a charge of 1.0 c. what is the charge on a so that the force on b is zero?

Answers

Charges a and d, on the other two corners, have equal charge, while both b and c have a charge of 1.0 c, so the charge so that the force on b is zero is -2.8.

Charge is the material's physical quality that results in a force being applied to it when it is exposed to an electromagnetic field. You can have a positive or negative electric charge. Opposite charges attract one another while like charges repel one another. Neutral refers to an object that carries no net charge.

A square is a geometric shape with four equal-length sides and four right-angled corners. When diagonally opposite charges are paired, the fields inside every duo cancel in examples 1 and 2, leaving no net field at the centre.

To learn more about Charge here

brainly.com/question/19886264

#SPJ4

when you define a system to determine the temperature rise created in a lake when a portion of its water is used to cool a nearby electrical power plant, should we account for all the forms of water entering and leaving the volume selected?

Answers

All forms of water entering and leaving the volume selected should be accounted for in order to accurately determine the temperature rise in the lake caused by the power plant.

When determining the temperature rise of a lake caused by a nearby power plant, it is important to consider all forms of water entering and leaving the selected volume.

This includes not only the water being withdrawn and returned by the power plant, but also any other sources of water entering or leaving the lake, such as precipitation, evaporation, and surface or ground water flow.

By accounting for all of these inputs and outputs, a more accurate understanding of the overall heat balance of the lake can be obtained and the impact of the power plant on the lake's temperature can be better understood.

To learn more about power plant visit: https://brainly.com/question/16064039

#SPJ4

during summer months, in hot regions of the united states, some homes run air conditioners continuously. how many homes can the same power plant support if average electricity usage increases to 1,200 kwh/month during summer months?

Answers

The same power plant could supply approximately 270,000 homes if the average electricity consumption rises to 1,200 kWh/month in the summer.

This is due to the fact that there is now a significant increase in the demand for electricity, which must be met by power plants.

500 mW x 24 hours/day x 30 days/month x 0.9 = 324,000 MWh/month.

The number of homes that the same power plant can serve, however, may vary based on how much electricity each household has.

324,000 mWh/month x 1,000 kWh/MWh = 324,000,000 kWh/month.

324,000,000 kWh/month/1,200 kWh/month/home = 270,000 homes.

The number of homes that can be served by the same power plant in hotter parts of the United States may rise significantly if air conditioning is kept up.

To learn more about electricity usage at

https://brainly.com/question/29148191?referrer=searchResults

#SPJ4

If you pour whisky over ice, the ice will cool the drink, but it will also dilute it. A solution is to use whisky stones. Suppose Ernest pours 55. 0 g of whisky at 22 ∘C room temperature, and then adds three whisky stones to cool it. Each stone is a 32. 0 g soapstone cube that is stored in the freezer at -11 ∘C. The specific heat of soapstone is 980 J/kg⋅K; the specific heat of whisky is 3400 J/kg⋅K. What is the final temperature of the whisky?

Answers

The final temperature of the whisky is  10.95∘C when 55.0g of whisky at 22∘C room temperature, and then three stones to cool it are added.

Given the mass of whisky (m1) = 55g = 55x10^-3kg

Initial temperature of whisky (T1) = 22∘C

The final temperature of mixture = T

The mass of stone cube (m2) = 32g = 32x10^-3kg

The temperature of stone (T2) = -11∘C

The specific heat of stone is (Cs) = 980J/kg.K

The specific heat of whisky is (Cw) = 3400J/kg⋅K

Let the number of stones = 3

Following the combination, the stone cube gains hatred while the whisky loses heat.

Let the heat lost by whisky = Qw

Qw = 55 x 10^-3 x 3400J/kg⋅K x (22 - T)

Qw = 187(22 - T)

Let the heat gained by stones = Qs

Qs = 3 x 32 x 10^-3 x 980J/kg⋅K x (T-(-11))

Qs = 94.080(T+11)

We know that Qw = Qs such that

187(22 - T) = 94.080(T+11)

4114 - 1034.88 = 94.080T + 187T

T = 3079.12/281.08 = 10.95∘C

Hence the final temperature of the drink is  10.95∘C

To learn more about mass click here https://brainly.com/question/30337818

#SPJ4

A 0.008kg balloon floats up into the air. If it has 2.40J of gravitational potential energy
compared to the ground, how far above the ground did it float? (Assume the reference height at the
ground is 0.)
a. y = 300.m
b. y = 0.188m
c. y = 0.0942m
d. y = 30.6m

Answers

The reference height form the ground level is 30.6m.

What is the distance that is covered?

Let us note that when we are talking about the gravitational potential energy, we would have to look at the energy that is possessed by the object because the object is placed at a given height on earth.

Now, we have to note that the gravitational potential energy of the object can be obtained by the use of the formula;

E = mgh

E = gravitational potential energy

m = mass of the object

g = acceleration due to gravity

h = height

Then;

2.4 =  0.008 * 9.8 * h

h = 2.4/0.008 * 9.8

h = 30.6m

Learn more about gravitational potential energy:https://brainly.com/question/19768887

#SPJ1

The tendency for a material to oppose the flow of electrons is called_____.

Answers

When a material tends to obstruct the flow of electrons, electrical energy is converted into heat energy and light. All materials have a characteristic called electrical resistance. Ohms, or, are used to measure resistance.

The flow of electrons is in the opposite direction from the flow of current. Resistance is a conductor quality that prevents current from flowing. Electrons and ions collide as they pass across a conducting wire. The current is decreased as a result of these collisions, which convert some kinetic energy into thermal energy. The ohm is the SI unit of resistance. Regarding the movement of electrons, they naturally gravitate towards the +ve side due to their -ve charge, which is the opposite of the traditional direction of current flow (from +ve to -ve).

To learn more about resistance click here https://brainly.com/question/29427458

#SPJ4

how long does it take for a serious burn to occur when the temperature of a liquid is 140 f degrees?

Answers

A significant burn can happen in as little as five seconds at a hot liquid's temperature climb to 140° F.

Is the water hot at 140 degrees Fahrenheit?

A major reason to keep hot water at 120 degrees, especially if you have young children, is because hot water exceeding 140 degrees can potentially cause scorching. Scalding can have serious consequences and is more likely to happen to children and elderly people.

What is temperature?

Temperature is a measurement of how hot or cold something is on a specific scale.

What temperature causes the skin to burn?

According to studies, a full-thickness skin burn can occur at a temperature of 52 degrees Celsius (125 degrees Fahrenheit) in 2 minutes and a temperature of 54 degrees Celsius (130 degrees Fahrenheit) in 30 seconds.

Burn Exposure chart

To know more about 140 degrees Fahrenheit visit:

https://brainly.com/question/24542751

It just takes five seconds or less for a major burn to develop when a hot liquid is raised to a temperature of 140° F.

How long does a serious 140 degree burn last? It just takes five seconds or less for a major burn to develop when a hot liquid is raised to a temperature of 140° F.In order to have a full thickness burn at this temperature, adult skin needs to be exposed for an average of five minutes.A significant burn can happen within five seconds or less when a hot liquid is heated to 140 degrees Fahrenheit (60 degrees Celsius). In contrast to 120°F, where a significant burn takes roughly 10 minutes to occur, 140°F hot water can cause a serious burn in a person in just 3 seconds.Children and older individuals are at higher risk because thinner skin burns more quickly.

To learn more about temperature refer

https://brainly.com/question/24746268

#SPJ4

TIPERS

B3-CT26: CURLER PUSHING STONE-FORCE ON STONE

Two identical curling stones (the playing pieces in the sport of curling) are pushed horizontally on ice by curlers.

The instantaneous speed and acceleration of the two stones are given. Ignore the friction between the stone and the

ice.

А

B

V=3 m/s

V = 2 m/s

a = 1 m/s2

a= 2 m/s2

Is the magnitude of the force that the curler is exerting on the stone (i) greater in Case A, (ii) greater in Case

B, or (iii) the same in both cases?

Explain your reasoning.

Answers

The magnitude of the force that the curler is exerting on the stone (ii) greater in Case B

Push or pull of an object is considered a force. Push and pull come from the objects interacting with one another. The push or pull on an object with mass causes it to change its velocity.Force is an external agent capable of changing a body’s state of rest or motion. It has a magnitude and a direction. The direction towards which the force is applied is known as the direction of the force, and the application of force is the point where force is applied.Newton’s 2nd law states that the acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the object’s mass. i.e. F = Ma

Thus Force is directly proportional to acceleration of an object.

Here , Case (B) has higher acceleration. So, It will have greater force.

To know more about force visit:

https://brainly.com/question/28984256

#SPJ4

If the Earth's sideways velocity could be suddenly stopped to zero, how would Earth move?

Group of answer choices


More information is needed to answer this question


It would fall directly into the sun


It would continue to orbit as before


It would fly off into space

Answers

If the Earth's sideways velocity becomes zero the Earth would still continue to orbit as before.

Sideways velocity of the earth is the rotational speed of the earth in terms of linear velocity. That is 1100 miles an hour approximately. If the sideways velocity of the earth becomes zero, objects on the earth will start flying eastward. This is due to the momentum possesses by the object on the surface of the earth. Flying of the rocks and oceans would cause the earthquakes and tsunamis. But there will not be any effect on the orbital velocity of the earth as it is governed by the gravitational force between the earth and the sun. Which ultimately depends on the masses of the sun and the earth and the distance between them.

So the correct option will be that the earth would continue to orbit as before.

To know more about sideways velocity, here

https://brainly.com/question/18737464

#SPJ4

a horizontal force of 110 n is applied to a stationary wooden box in one direction, and a 700 n horizontal force is applied in the opposite direction. what additional force (in n) is needed for the box to remain stationary?

Answers

The additional force needed is 590 N.

Given,

Force of 110 N is applied in one direction and a force of 700 N is applied in other direction. In order to keep the box stationary, additional force applied is difference between the two applied forces.

i.e. Additional force = 700N - 110N = 590N

Push or pull of an object is considered a force. Push and pull come from the objects interacting with one another. Terms like stretch and squeeze can also be used to denote force.Force is an external agent capable of changing a body’s state of rest or motion. It has a magnitude and a direction. The direction towards which the force is applied is known as the direction of the force, and the application of force is the point where force is applied.In the standard international system of unit (SI unit) it is expressed in Newton (N).The quantity of force is expressed by the product of mass (m) and acceleration (a). The equation or the formula for force can mathematically be expressed in the form of: F = ma.

To k now more about force visit :

https://brainly.com/question/16978243

#SPJ4

An object moves from point x to point y in 20 s, where the velocity at x = 50 km/h and
the velocity at y = 5. 56 m/s, so the acceleration of this object is. ​

Answers

The acceleration of this object is [tex]-8.33 m/s^2[/tex] (negative acceleration means it is slowing down).

How to calculate the acceleration of an object?

To calculate the acceleration of an object you can use the following formula:

a = (v_f - v_i) / t

where a is acceleration, v_f is final velocity, v_i is initial velocity, and t is time.

Velocity at x = 50 km/h and velocity at y = 5.56 m/s, and the time taken to move from point x to point y is 20 seconds, so plug these values ​​into the formula to get the acceleration: can ask. :

a = (5.56 m/s - (50 km/h)*(1000 m/km)/(3600 s/h)) / 20 seconds

a = (5.56m/s - 13.89m/s) / 20s

a = -8.33m/s^2

So the acceleration of this object is -[tex]8.33 m/s^2[/tex] (negative acceleration means it is slowing down).

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ4

Question 1(Multiple Choice Worth 2 points)
(03.03 MC)

In which of the following situations would sonar be most practical?

Measuring the distance between objects in the ocean
Observing internal organs
Determining the frequency of sounds
Dampening the intensity of sounds

Answers

The most practical application of sonar is measuring the distance between objects in the ocean.

option A.

What is sonar?

Sonar is a technique that uses sound propagation to navigate, measure distances, communicate with or detect objects on or under the surface of the water, such as other vessels.

So basically, sonar is applied under water to measure the distance of objects such minerals, vessels , etc.

Thus, we can conclude that the most practical application of sonar is found under water, for measuring the distance between objects in the ocean.

Learn more about sonar here: https://brainly.com/question/14090821

#SPJ1

Which et of condition would promote the greatet temperature change from unrie to mid-afternoon?

Answers

The combination of cloudy skies, quiet winds, and humid air would encourage the greatest temperature shift from sunrise to mid-afternoon.

The location of a place in relation to the sea is the primary factor that affects temperature. Compared to land, the sea both gains and loses heat gradually. Rapid warming and cooling occur on land.

Latitude, height, distance from the sea, and ocean currents are the four unavoidable factors that affect temperature.

Compared to land, oceans warm up and cool down considerably more gradually. This indicates that, for the same latitude and elevation, coastal areas tend to be warmer in the winter and cooler in the summer.

To learn more about Temperature :

https://brainly.com/question/29739788

#SPJ4

The greatest temperature change from sunrise to mid-afternoon would be caused by a mix of gloomy skies, calm winds, and humid air.

The main factor affecting temperature is where a place is in proximity to the sea. The sea progressively warms and cools compared to land. On land, there is a sudden warming and cooling.

The four unavoidable factors that affect temperature are latitude, height, distance from the sea, and ocean currents. Oceans warm up and cool down much more gradually than land does. This shows that coastal places typically experience warmer winters and cooler summers for the same latitude and elevation.

To learn more about Temperature Visit: brainly.com/question/29739788

#SPJ4

helpp! A certain chemical reaction produces 0.0450grams of product. How many significant figures does this measurement have?

a.3
b.4
c.5
d.2

Answers

The measurement have 4 significant figures. Hence, option (b) is correct.

What is  significant figures?

The number that is given as digits is established using significant figures. A meaningful representation of numbers is carried by these digits.

Frequently, significant digits are employed in place of figures. By counting all of the values beginning with the first non-zero digit on the left, we may determine the number of significant digits.

The certain chemical reaction produces 0.0450grams of product.

In 0.0450, there have 4 significant figures.

Learn more about significant figures here:

https://brainly.com/question/29153641

#SPJ1

Answer: The answer is 3 sig figs, option A

Explanation:

PLEASE DO ASAP WILL GIVE BRAINLIEST!!!

An initially neutral and non-polarized conducting rod is moving to the right at a constant speed v through a large region that has a uniform magnetic field, as shown above. Which of the following statements correctly describes the motion of the particles within the rod and the resulting charge separation in the rod caused by this motion?

(A) Positively charged particles within the rod moved downward, causing the bottom of the rod to have a positive charge and the top to have a negative charge.

(B) Negatively charged particles moved upward, causing the bottom of the rod to have a positive charge and the top to have a negative charge.

(C) Positively charged particles moved upward, causing the top of the rod to have a positive charge and the bottom of the rod to have a negative charge.

(D) Negatively charged particles moved downward, causing the top of the rod to have a positive charge and the bottom of the rod to have a negative charge.

Answers

Answer:

C

Explanation:

(C) Positively charged particles moved upward, causing the top of the rod to have a positive charge and the bottom of the rod to have a negative charge.

When a neutral and non-polarized conducting rod moves through a magnetic field, it will experience a force known as the Lorentz force. This force acts on the moving charges within the rod, and causes them to move perpendicular to both the direction of motion and the magnetic field. In this case, since the rod is moving to the right, and the magnetic field is pointing into the screen, the Lorentz force will act upward on the positively charged particles within the rod. This motion will cause a separation of charges in the rod, with the top having a positive charge and the bottom having a negative charge.

C) Positively charged particles moved upward, causing the top of the rod to have a positive charge and the bottom of the rod to have a negative charge.

Explain why omebody would ue a panner with a longer handle if they needed to undo a tight bolt

Answers

A spanner with longer handle increases the torque which in turn requires less force to undo the bolt.

This is because the rotational effect of a force depends on the perpendicular distance of the line of action of the applied force from the axis of rotation. The greater the vertical distance, the less force is required to rotate the body. That's why a spanner has a long handle. Long handles relieve pressure due to increased surface area. A long handle wrench is recommended. The larger the area, the lower the pressure, and the larger the area, the lower the pressure. The longer the handle, the greater the torque, and it will be easier to open a stuck bolt with a certain amount of force.

To know more about torque, visit:

https://brainly.com/question/29024338

#SPJ4

21) a stretched string is observed to have four equal segments in a standing wave driven at a frequency of 480 hz. what driving frequency will set up a standing wave with five equal segments? a) 600 hz

Answers

The driving frequency that will set up a standing wave with five equal segments is 600 Hz.

It is given that frequency observed for a stretched string with four equal segments in a standing wave is 480Hz.

That is,  f₄ = 480 Hz

      Fundamental frequency, f₀, can be calculated as,  

              f₀ = [tex]\frac{480}{4} = 120 Hz[/tex]

Therefore, the driving frequency that will set up a standing wave with five equal segments, f₅, is

            f₅ = f₀ × 5

            f₅= 120 × 5

            f₅ = 600 Hz.

Hence, the driving frequency, f₅, is 600 Hz.

To know more about standing waves, visit: https://brainly.com/question/2292466

#SPJ4

the mass of fuel in a jet must be calculated before each flight to ensure that the jet is not too heavy to fly. a 747 is fueled with 173,231 l of jet fuel. if the density of the fuel is 0.768 g / cm3 , what is the mass of the fuel in kilograms (kg)?

Answers

The mass of the fuel is 133 kilograms. The result is obtained by using the formula for the density.

What is the density of a substance?

The density is the mass of a substance per unit of volume. It can be expressed as

ρ = m/V

Where

ρ = densitym = massV = volume

A jet 747 is fueled with jet fuel.

V = 173.231 L ρ = 0.768 g/cm³

Find the mass of the fuel!

We convert the units of volume and density.

V = 173.231 L

V = 173.231 dm³

V = 173.231 × 1/1000 m³

V = 0.173231 m³

ρ = 0.768 g/cm³

ρ = 0.768 × 1000 kg/m³

ρ = 768 kg/m³

Using the formula for a density, we will get the mass.

ρ = m/V

768 = m/0.173231

m = 0.173231 × 768

m ≈ 133 kg

Hence, the jet fuel has a mass of 133 kilograms.

Learn more about density here:

brainly.com/question/30297396

#SPJ4

summary of the mankind mutation

Answers

Mutations occur in the genetic material due to alterations in the sequence of nucleic acids of the genome. Mutations are harmful as they lead to many disorders and conditions which are life-threatening.

What are Mutations?

A mutation can be defined as an alteration in the sequence of nucleic acids of the genome of a living organism, virus, or the extrachromosomal DNA material such as the mitochondrial DNA or the chloroplast DNA. Viral genomes are different from that of other living organisms as they contain either DNA or RNA as genetic material.

The guanine-thymine (G-T) mutation is the single most common mutation which occurs in the DNA of human. This mutation occurs about once in every 10,000 to 100,000 base pairs in the DNA.

Mutations are of different types. From which, the deletion mutations are opposite types of point mutations. These mutations involve the removal of a base pair from the sequence. Both of these mutations lead to the creation of one of the most dangerous type of point mutations which is known as the frameshift mutation.

Learn more about Mutations here:

https://brainly.com/question/13923224

#SPJ1

a 60 kg hiker wishes to climb a hill 1200 meters high if he can generate a sustained power of 500 watts how long will it take him to climb the hill​

Answers

If the hiker moves at a constant 500 Watts per meter, it will take 2.4 hours to ascend the hill (1200 meters x 500 Watts).

Explain about the Motion.

The way a body's orientation or position changes over time. Translation describes motion along a line or a curve. Rotation is a motion in which a body's orientation is altered.

An object moving or being moved is referred to as motion. It's said that motion follows a pattern when it repeats. Making predictions about future motion requires the observation of patterns of motion. Friction is the name for the force that prevents moving objects from moving.

The fundamental kinematics equation of motion, which states that the distance travelled divided by the object's speed equals the amount of time required to travel that distance.

Following are the steps to determine how long it took to climb the hill:

To start, figure out the hiker's power output.

500 Watts are being produced continuously by the hiker.

Step two is to compute the climbing time.

By dividing the distance travelled by the time it took to climb the slope.

To learn more about motion, visit

brainly.com/question/11049671

#SPJ1

why did aristarchus choose the time of a half moon to make his measurements for calculating the earth -sun distance?

Answers

At a half moon, this means the Suns light is falling on exactly half of the moon. So the angle must be a right angle (same as between the moon and sun, earth and sun, and earth and moon).So ,he choose the time of a half moon for calculating the earth -sun distance

The moon and the sun appear to have the same size and have the same angle of taper. He was able to determine the distance to the sun by using the right triangle that the sun made with the moon. At a distance 100,000 times closer than the Oort cloud, the Earth orbits the sun. It is only 92,955,807 miles (149,597,870 kilometres) away on average. Astronomical unit, or AU, is the name for the distance between the earth and the sun. Additionally, we utilise it to calculate distances throughout the solar system.

He calculated the angle between the Sun and a quarter-phase moon. He discovered the angle to be 87° and deduced that the Sun was between 18 and 20 times farther distant from the moon using the mathematics available at the time.

For such more questions on Aristarchus:

brainly.com/question/12689873

#SPJ4

This indicates that the moon is exactly halfway illuminated by the Sun at a full moon. The angle must therefore be a right angle (same as between the moon and sun, earth and sun, and earth and moon).

He therefore chose a half moon to calculate the Earth-Sun distance. Both the moon and the sun seem to be the same size and have a similar tapering angle. The right triangle formed by the sun, moon, and earth allowed him to calculate the distance to the sun. The distance between the Earth and the sun is 100,000 times closer than that of the Oort cloud. On average, it is only 149,597,870 kilometers (92,955,807 miles) away.

The distance between the earth and the sun is known by the abbreviation astronomical unit (AU). We also employ it to determine distances within in the solar system.

He determined the Sun's angle with a quarter-phase moon. Using the mathematics known at the time, he calculated the angle to be 87° and concluded that the Sun was between 18 and 20 times farther away from the moon.

Learn more about on Aristarchus Visit: brainly.com/question/12689873

#SPJ4

what are the approximate dimensions of the smallest object on earth that astronauts can resolve by eye when they are orbiting

Answers

Approximate size s 700 is 29.4 m

Find Approximate size?

The diffraction limit, which may be calculated using the formula = 1.22 / D, establishes the limit of the human eye's solution.

The circular aperture's mediator, D, and the wavelength are where you lick them.

The eye responds to wavelengths between 400 nm and 700 nm in our situation, where the dilated pupil has a diameter of about 8 mm = 8 10-3 m.

the formula is amended by including these values

λ = 400 nm θ = 1.22 400 10⁻⁹ / 8 10⁻³ = 6 10⁻⁵ rad

λ = 700 nm θ = 1.22 700 10⁻⁹ / 8 10⁻³-3 = 1.07 10⁻⁴ rad

The definition of radians is now: radians = s / R.

where the radius is R and s is the supported arc. For each scenario, let's identify the sarcos.

λ = 400 nm s 400 = θ R

S 400 = 6 10⁻⁵ 275

λ = 700 nm s_ 700 = 1.07 10⁻⁴ 275 10³

s 700 = 29.4 m.

The complete question is,

What is the smallest item on Earth that astronauts can see by eye when circling 275 kilometers above the planet and what is its approximate size?

To learn more about Approximate size refer to:

https://brainly.com/question/23049041

#SPJ4

A 68.5 kg rocket is to be launched upwards with an acceleration of 3.65 m/s^2. What is the size of the net force acting on the rocket?

Answers

Answer:

250.025 Newtons

Explanation:

Fnet=ma

which scenario describes a closed system in which momentum will be fully conserved? physics is beautiful

Answers

A bullet fired from a gun is the scenario which describes conservation of momentum.

A closed system is one which is not affected by the any external force or activity. When a bullet is fired from a gun it generates a recoil velocity in the gun. This is due to the conservation of momentum. Initially the momentum of the system (gun + bullet) is zero. When a bullet is fired because of having less mass as compared to the gun, it escape out with more velocity. To conserve the momentum of the system the gun also generates velocity in the backward direction. Due to the heavy mass of the gun as compared to the bullet, this velocity is very less, which is called recoil velocity.

To know more about conservation of momentum, here

https://brainly.com/question/3920210

#SPJ4

How many years older will you be 2. 00 billion seconds from now? (Assume a 365-day year. )

Answers

After 2.00 billion seconds you will be around 63 years assuming a 365 day year.

To know the answer you need to know the number of seconds in a year.

First, you need to multiply, 60 × 60

to find the number of seconds in an hour, which is 3600 seconds.

Then, multiply = 3600 × 24

to find the number of seconds in a day, which is 86,400 seconds.

Next, multiply = 86400 × 365

to find the number of seconds in a year, which is 31,536,000 seconds.

Finally, divide 2,000,000,000 by 31,536,000 and you will get about 63 years.

To know more about such age related calculation,

brainly.com/question/502038

#SPJ4

Other Questions
Annotate: Highlight words and phrases in paragraph 4 that describe Parris.Infer: What impression do you get about Parris from these details? Are these details an example of direct characterization or indirect characterization? Explain. It is very hot during the summer, so you want to go to your local pool. The meteorologist explains that the UV index for the day is extremely high. What does the UV index represent?A. The UV index represents the wavelength of the ultraviolet raysB. The UV index represents the speed of the light ultraviolet raysC. The UV index represents the intensity of the ultraviolet rays D. The UV index represents the color of the ultraviolet rays. the willingness of a consumer to give up consumption of one commodity (x) in exchange for an increase in some other commodity (y) __________ occurs when people experience a gain or loss in position and/or income that does not produce a change in their place in the class structure.A. Horizontal mobilityB. Structural mobilityC. Situational mobilityD. Vertical mobility marginal utility is the part 2 a. extra satisfaction received from consuming one more unit of a product. b. satisfaction achieved when a consumer has had enough of a product. c. total satisfaction received from consuming a given number of units of a product. d. average satisfaction received from consuming a product. how long does it take for state taxes to be accepted? which statement is correct?a monophyletic group consists of all of the descendants of an ancestral population. a monophyletic group may include an ancestral population and some, but not all, of its descendants. a monophyletic group consists of an ancestral population, all of its descendants, and only those descendants. a monophyletic group is a theoretical idea that does not exist in the real world. A foreign laborer living and working temporarily in another country.answer choicesinternal migrationguest workerfoehnmistral a client is admitted to the health care facility with a diagnosis of pediculosis capitis. what would the nurse expect to find in the client? what is right! its either a or c events A and B in some sample sapce each have a probability 0.5 of occuring, while the probability that both occur (simultaneously) is 0.25. what is the probability that neither of A or B occurs? this is the work i did, can i please get some guidance what is the main purpose of social institutions? to create an infrastructure system throughout the world to help carry out functions that are crucial for the society's survival. to make buildings, such as prisons, to help society to create unique differences in the world so each society is unique energy can exist in numerous forms such as thermal, mechanical, kinetic, potential, electrical, magnetic, chemical and nuclear in a system. the sum of all these energies is called . How far does the object travel between 5 and 10 s Elk Electronics has bonds outstanding with a market value of $3,085,000. It also has 180,000 shares of stock outstanding that are selling for $43. 25 per share. The all-equity value of the firm is $11,400,000. The tax rate is 21 percent. By what amount has the value of the firm been decreased by the expected bankruptcy costs share 2 examples of companies that experienced a change in revenue as the result of a change in the price of the good or service they provided and explain which determinants of price elasticity of demand could be the cause of the change in demand the maria acronym helps to identify the five tests of a fixture. which of the following tests refers to how and whether the item is attached to the property? When assessing schedule feasibility, a systems analyst must consider the interaction between time and costs.true or false classify each of the following substances as an element, compound, or mixture using the dropdown menus in the classification table. in 2021 the standard deduction for individuals was