How far does the object travel between 5 and 10 s

The value of the force P at which the space between the polyethylene bar and the steel tube will be closed is 88,120 lbf.

Poisson's ratio is a measure of the relationship between the longitudinal and transverse strains in a material. It is defined as the ratio of the change in the width per unit width (transverse or lateral strain) to the change in length per unit length (longitudinal or axial strain) caused by an applied load. The ratio typically ranges between 0 and 0.5 for most materials.

The value of the force P at which the space between the polyethylene bar and the steel tube will be closed can be calculated using the formula P = (π/4) * E * (d1^4 - d2^4)/(d1^4)

Given that E = 200 ksi and d1 = 4.0 in, d2 = 4.01 in

P = (π/4) * 200000 * (4.0^4 - 4.01^4)/(4.0^4)

P = 8.812 * 10^4 lbf

So the value of the force P at which the space between the polyethylene bar and the steel tube will be closed is 88,120 lbf.

To know more about applied load, visit:

https://brainly.com/question/29379801

#SPJ4

The graph would look like a series of two linear slopes, one going up and one going down.

Linear slopes are lines that have a constant rate of change. They show the relationship between two variables and are typically represented by a straight line on a graph.

The upward slope would represent the increase in kinetic energy as the object accelerates in the x-direction due to the first applied force. The downward slope would represent the decrease in kinetic energy as the object decelerates in the y-direction due to the second applied force. The graph would end with a flat line at zero kinetic energy, representing the object coming to rest at the end of the two applied forces.

To learn more about kinetic energy
https://brainly.com/question/30285686
#SPJ4

1.) Car 2 will overtake car 1 at t = 0.828 seconds after car 1 took off. 2.) Point of overtaking will happen at a distance of 2.69 m from the starting point. 3.) Car 2 will be 3.71 m/s faster than Car 1 at the point of overtaking.

In mechanics, acceleration is the measure of how quickly the velocity of an object changes in relation to time.

1.) As, distance = initial velocity * time + (1/2) * acceleration * time^2

Given, car 1 has an acceleration of 3.5 m/s^2 and car 2 has an acceleration of 6.1 m/s^2.

So, distance = (6.1 m/s^2) * (t + 1.1)^2 = (3.5 m/s^2) * t^2

Therefore, car 2 will overtake car 1 at t = 0.828 seconds after car 1 took off.

2.)As, distance = initial velocity * time + (1/2) * acceleration * time^2

Let t be the time it takes for car 2 to overtake car 1, as calculated above t=0.828 seconds.

distance covered by car 1

distance = (1/2) * 3.5 m/s^2 * t^2 = (1/2) * 3.5 m/s^2 * 0.828^2 = 0.907 m

And distance covered by Car 2 is:

distance = (1/2) * 6.1 m/s^2 * (t+1.1)^2 = (1/2) * 6.1 m/s^2 * (0.828+1.1)^2 = 2.69 m

Therefore,  point of overtaking will happen at a distance of 2.69 m from the starting point.

3.) As we know, velocity = acceleration * time

point of overtaking is at t = 0.828 seconds after car 1 took off.

So, Velocity of Car 1 at the point of overtaking is:

velocity = 3.5 m/s^2 * 0.828 sec = 2.94 m/s

Velocity of Car 2 at the point of overtaking is:

So, velocity = 6.1 m/s^2 * (0.828 + 1.1) sec = 6.65 m/s

Therefore, Car 2 will be 6.65 m/s - 2.94 m/s = 3.71 m/s faster than Car 1 at the point of overtaking.

To know more about acceleration, refer

https://brainly.com/question/460763

#SPJ4

Note: The question given on the portal is incomplete. here is the complete question.

Question: Two rather unequal cars are competing in a drag race. for simplicity, let's assume that the accelerations of the cars are constant. car 1 has an acceleration of 3.5 m/s2, while car 2 has an acceleration of 6.1 m/s2. car 2 gets off to a late start, 1.1 seconds after car 1.

1. At what time after Car 1 took off will it be overtaken by Car 2?

2. How far down the track will this happen?

3. How much faster will Car 2 be than Car 1 by that time?

The maximum overhang possible for the two bricks (without tripping) is 15m.

Given,

          Length of the brick (L) = 24m

          Maximum overhang = 12m

          Length of second brick = 24m

          Maximum overhang for two bricks =?

Now,

Generally, the equation for the value x (mid-point joining the bricks)             is given as,

x = 0.25 × L

  =0.25 × 12

  = 3m

Hence,

The maximum overhang possible for the two bricks (without tripping) will be,

L₀ = L/2 + x

    = 24/2 + 3

    = 12 + 3

    = 15m

Therefore, The maximum overhang possible for the two bricks (without tripping) is 15m.

Learn more about overhang length, here:

https://brainly.com/question/26390576

#SPJ1

The angular diameter of Mars in radians and in arc minutes and the evaluation of the capability of human eyes to resolve Mars of diameter 6.8 × 10³ km, located 5.5 × 10⁷ km away are as follows;

(d) The angular diameter of Mars is 1.23[tex]\overline{63}[/tex] × 10⁻⁴ rad

(e) The angular diameter in arc minutes is about 0.425 arc minute.

The angular diameter is an apparent dimension used to describe the size of a circular object, observed from a specified point of view or location.

The diameter of Mars = 6,800 km

The closest distance between Mars and Earth when Mars gets closest to Earth = 55,000,000 km

(d) The angular diameter of Mars can be obtained by finding the vertex angle formed by the diameter of Mars and the ray from the observer on Earth to the left and right extremities of Mars using the trigonometric ratio of tangent as follows;

Angular diameter = 2 × arctan((6,800/2)/55,000,000) = 0.000123636363 radians

The angular diameter of Mars as observed from Earth is 1.23[tex]\overline{63}[/tex] × 10⁻⁴ radians

(e) 1 radians = 3437.75 arc minute

0.000123636363 radians = 0.000123636363 × 3437.75 arc minute

0.000123636363 × 3437.75 ≈ 0.425

Therefore;

0.000123636363 radians ≈ 0.425 arc minute

The specified level of detail that the human eye can resolve is one arc minute (1')

The apparent angular diameter of Mars, which is about 0.425 arc minute is lesser than the angular limit of detail of one arc minute that the eye can resolve, therefore, humans can not resolve Mars without optical aid.

Learn more about trigonometric ratios here: https://brainly.com/question/25663658

#SPJ1

I think D. golf is the answer

The planet that has ⅒ of the earth's gravity is the moon.

Gravity is the force exerted by any object with mass on any other object with mass.

Gravity is the force on Earth's surface, of the attraction by the Earth's masses, and the centrifugal pseudo-force caused by the Earth's rotation, resulting from gravitation.

The gravity on the planet Earth is 1 with a acceleration due to gravity of 9.8m/s². One-tenth of this is 0.1 (0.98m/s²).

The planet with the above gravity is the moon with a gravity of 0.166.

Learn more about gravity at: https://brainly.com/question/14874038

#SPJ1

True, the three particles of identical mass m are acted on only by their mutual gravitational attraction when located at the vertices of an equilateral triangle with sides of length l.

To keep l constant, the angular velocity required for the motion of any one particle about the center of mass (COM) of the system, g, needs to be calculated.

This can be calculated by using the equation

ω = √[G × m × (1/l³)].

In this equation, G represents the gravitational constant and m is the mass of the particles. Thus, the angular velocity required to keep the sides of the triangle of length l constant is equal to √[G × m × (1/l³)].

Learn more about angular velocity:

https://brainly.com/question/15154527

#SPJ4

Answer:

Explanation:

Impulse is the product of force and time

there for it unit will be [Newton seconds]

Neap tides, which happen twice a month as well, take place when the sun and moon are at an angle to one another.

These bodies' monthly and yearly orbits have an impact on tidal movements. The phases of the moon affect spring and neap tides. Every month of the lunar year, there are two spring tides. Only when the sun and moon are at a perfect angle to one another can neap tides take place.

Neaps, which means powerless, is an Anglo-Saxon word. Actually, spring and neap tides often happen approximately a day after the Moon because the oceans need some time to adjust to its geometry.

To know more about neap tide visit:

https://brainly.com/question/29417771

#SPJ4

As temperature increases, molecules of liquid become more active and they move more rapidly.

Wave characteristics that remain unchanged are A. Frequency and E. Direction.

Frequency and direction are the only Wave characteristics that don't change when a wave crosses a barrier into a new medium. No matter what medium a wave is travelling through, frequency refers to the rate of change of a wave per unit of time. The wave's direction dictates how it will interact with other materials and objects along its course, as well as how it will be oriented.

But when a wave enters another medium, its wavelength and speed do alter. The wave's length, which varies depending on the medium it is travelling through, is the space between its two successive crests or troughs. The wave's velocity, which also varies when it encounters a different medium, is its speed. This is so because the characteristics of the medium the wave is travelling through affect its speed.

The wave's amplitude, which is likewise altered when it passes a boundary into a new medium, is its largest departure from its resting point. This is so because the material the wave is going through has an effect on the energy of the wave, which determines the amplitude.

As a result, when a wave crosses a boundary and enters a new medium, its wavelength, velocity, and amplitude all vary based on the characteristics of the new medium but its frequency and direction stay the same.

Learn more about Wave characteristics here:

https://brainly.com/question/27639745

#SPJ4

The value of the spring constant is k = 2.44 N/m

We know that work done by a spring is given by :W =  [tex]\frac{1}{2} kx^{2}[/tex]

Where,

W = Work done = 0.15 J

x = stretched distance = 0.35 m

k = spring constant

Putting these values in above equation we get, k = 2.44 N/m

To know more about work visit:

https://brainly.com/question/29994307

#SPJ4

Driving to the nearest star, Alpha Centauri, would take 26.4 million kilometers.

Speed is the rate at which an object moves along a path in time, whereas velocity is the rate and direction of movement. In other words, velocity is a vector, whereas speed is a scalar value. The rate at which an object's position changes in any direction. Speed is defined as the ratio of distance traveled to time spent traveling. The direction of movement of the body or object is defined by velocity. Speed is fundamentally a scalar quantity. Velocity is, in essence, a vector quantity. It is the rate at which distance changes. It is the displacement rate of change.

Here,

speed=distance/time

time=distance/speed

=4.4*9.46 trillion kilometers/160

=26.4 million kilometer

It would take 26.4 million kilometer to drive to the nearest star, Alpha Centauri.

To know more about speed,

https://brainly.com/question/29100366

#SPJ1

The Bohr model states that when an electron in an atom jumps from one energy level to another, it releases energy in the form of light and produces an emission spectrum.

An absorption spectrum happens when light is absorbed by an atom, which causes electrons to jump from low energy levels to high energy levels.

The energy difference between the two levels involved in electron transfer is reflected in a specific spectral line in the emission or absorption spectrum.

The generation of spectral lines in the emission and absorption spectra of this element is caused by its atomic electronic transitions.

To learn more about the emission spectrum at

https://brainly.com/question/27268130?referrer=searchResults

#SPJ4

The question is -

The same atom can produce either an emission spectrum or an ion spectrum depending on how the atom's electrons and light (one emission and one absorption) are created by an element. According to the Bohr model, different ed by different electron transitions in the atoms of that element. For each of the spectral lines indicated, pick the appropriate electron transition in the atom that is responsible for creating the spectral line. Absorption spectrum Emission spectrum 3OF9 6 1 8 2.

The right ascension of the sun compare with the sidereal time at solar noon in the sense that the sidereal time is just the right ascension  that is on the meridian. The sidereal time increases by approximately 15 degrees  every hour of time because of the rotation of the sky.

Sidereal time is described as a timekeeping system that astronomers use to locate celestial objects.

The constellations and lines of right ascension are all painted on the globe. The Earth's rotation makes it look like the sky globe rotates east to west once every 23 hours 56 minutes 4 seconds.

Learn more about Sidereal time at: https://brainly.com/question/13449239

#SPJ1

The velocity of the center of mass (V_cm) of the two carts before the collision is between 3.0 m/s and 0.3 m/s.

Collision is a term used to describe the physical impact between two or more objects. It is a phenomenon that occurs when two or more objects, such as cars, collide with each other, resulting in a transfer of energy from one to the other.

The velocity of the center of mass (V_cm) of the two carts before the collision can be calculated using the conservation of momentum equation:
V_cm = (m*V_1 + 4.0 kg*V_2) / (m + 4.0 kg)
Where V_1 is the initial velocity of the first cart (12 m/s) and V_2 is the initial velocity of the second cart (0 m/s).
Substituting values, we obtain:
V_cm = (m*12.0 m/s + 4.0 kg*0 m/s) / (m + 4.0 kg)
V_cm = 12.0 m/s / (m + 4.0 kg)
Since the mass of the first cart (m) is unknown, we cannot calculate the exact value of V_cm. However, we can calculate the maximum and minimum values of V_cm. For the minimum value, we assume m = 0, and for the maximum value, we assume m = ∞.
Minimum value: V_cm = 12.0 m/s / (0 + 4.0 kg) = 3.0 m/s
Maximum value: V_cm = 12.0 m/s / (∞ + 4.0 kg) = 0.3 m/s
Therefore, the velocity of the center of mass (V_cm) of the two carts before the collision is between 3.0 m/s and 0.3 m/s.

To learn more about collision
https://brainly.com/question/4403635
#SPJ4

The third statement provides the best air-standard assumption.

Air-standard assumptions are a set of assumptions that are used to simplify the analysis of thermodynamic systems involving air. The assumptions are necessary to simplify the analysis of the system because air is made up of many different gases and the temperatures and pressures of the system can vary significantly.

An air-standard assumption is a simplifying assumption used to calculate the thermodynamic cycle of a working fluid. This assumption states that the working fluid is air, and that all processes are reversible and adiabatic, with no changes in air composition. The third statement satisfies all of these criteria, as the exhaust process is isentropic, meaning that no energy is added or subtracted, and the working fluid immediately goes back to the beginning of the cycle to start again.

To know more about thermodynamics  click-
https://brainly.com/question/13059309
#SPJ4

The acceleration will be halved. That is a = Fnet / (2m) .

This refers to the rate of change of velocity. It is the speed that is changing but not at all times. When an object moves in a circular path at a constant speed, it is still accelerating, because the direction of its velocity is changing.

Solving for the acceleration:

The acceleration of the car will be halved. This is because the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.

The equation for acceleration is:

a = Fnet / m.

So if the mass of the cart is doubled but the net force remains the same, the acceleration will be halved.

a = Fnet / (2m)

Hence, the acceleration of the car be a = Fnet / (2m).

Learn more about acceleration on

https://brainly.com/question/2239252

#SPJ1

The change in volume over the 3 year period is 400,000 m3.

Volume is a measure of the three-dimensional space an object occupies. It is commonly measured in liters, cubic meters, or gallons. In physics, volume is the measure of an object's capacity to contain matter or energy.

The change in volume over the 3 year period is calculated using the formula:
Change in Volume = Total Volume * (1 - Final Water Content/Initial Water Content)
In this scenario, the Total Volume is 1,000,000 m3, the Initial Water Content is 120%, and the Final Water Content is 72%. Plugging these values into the formula, we get:
Change in Volume = 1,000,000 m3 * (1 - 72%/120%)
Change in Volume = 1,000,000 m3 * (1 - 0.6)
Change in Volume = 1,000,000 m3 * 0.4
Change in Volume = 400,000 m3
Therefore, the change in volume over the 3 year period is 400,000 m3.

To learn more about volume
https://brainly.com/question/14197390
#SPJ4

The foil flew off because of static electricity. When the inventor attempted to place a large negative charge on the ball, the negative charge caused an imbalance of electrons between the ball and the foil.

Static electricity is a form of electrical energy that occurs when electric charge accumulates on the surface of an object. It is created when two objects that have a different electrical charge come into contact and then separate, causing electrons to move from one object to the other.

This caused an electric field to form between the ball and the foil, generating an electrostatic force which repelled the foil away from the ball.

To learn more about static electricity
https://brainly.com/question/821085
#SPJ4

The magnitude of the electric field is 39 volts per meter and negative is the field directed toward plate 1.

The degree of labour required to transfer a unit of electric charge from a starting point to a particular spot in an electric field is known as the electric potential. Earth is typically chosen as the reference point, but any location outside the range of the electric field charge can be utilized.

The force per charge on the test charge is a straightforward method for determining the size of the electric field.  As an electric field is defined as a force per charge, the power units are divided by charge units which will ultimately be the units of an electrical field.

To learn more about electric potential here

brainly.com/question/12645463

#SPJ4

Explanation:

International standard: An international standard is a set of guidelines, specifications, or measurements that have been agreed upon by a group of countries or international organizations. These standards are typically used to ensure consistency and compatibility in areas such as trade, technology, and safety. International standards are often used to facilitate international trade and communication, and to ensure that products and services meet certain quality and safety requirements.

(ii) Primary standard: A primary standard is a standard that is considered to be the most accurate and reliable standard available for a particular measurement. These standards are typically used as the reference point for all other standards of that measurement. Primary standards are often used in scientific research and in the calibration of other standards.

(iii) Secondary standard: A secondary standard is a standard that is used to calibrate other instruments or standards. It is typically less accurate than a primary standard, but still considered to be of high precision. Secondary standards are often used in industry, research, and other areas where accurate measurements are required, but a primary standard is not practical or cost-effective.

(iv) Working standard: A working standard is a standard that is used in day-to-day operations and is typically less accurate than a secondary standard. It is used to calibrate equipment or instruments that are used in regular operations and it's typically less expensive to use than a secondary standard. A working standard is used to ensure that the equipment is operating correctly and within the acceptable limits of accuracy.

In summary, International standards are agreed upon by a group of countries or international organizations and are used to ensure consistency and compatibility

The graph shows that the final angular position depends on the angular acceleration at time t = 4 s and the angular position between 0 and 2 s, which is represented by -1/4 rad/sec2 and -1/2 rad, respectively (0, 6).

In physics, angular acceleration refers to how quickly angular velocity changes over time. Since spin angular velocity and orbital angular velocity are two distinct types of angular velocity, respectively, there are also two distinct types of angular acceleration. Spin angular acceleration and orbital angular acceleration are the names for these.

The change in angle between 0 and 2 seconds is equivalent to -(1/4)*2 = -1/2 rad. Angle acceleration is equivalent to dv/dt = -1/4 rad/sec2 at 4 seconds.

The graph shows degrees as the ultimate angular position after the whole 6 s interval (0, 6).

Learn more about acceleration here

https://brainly.com/question/12550364

#SPJ4

A mineral association that should not be found in nature would be a rock that contains both early-forming mafic minerals (such as olivine, pyroxene, and amphibole) and late-forming felsic minerals (such as plagioclase feldspar, quartz, and potassium feldspar) together in the same rock.

Bowen's reaction series is a model that describes how different minerals crystallize from a cooling magma or lava. The minerals that crystallize first, called early forming minerals, are generally rich in iron and magnesium and include olivine, pyroxene, and amphibole. Later-forming minerals, on the other hand, are typically rich in silicon and aluminum and include plagioclase feldspar, quartz, and potassium feldspar.

Crystal settling is the process by which heavier, denser minerals settle to the bottom of a magma chamber due to gravity, while lighter, less dense minerals remain suspended in the magma. This process can occur as the magma cools and solidifies, or as the magma is intruded into existing rock.

Given this information, a mineral association that should not be found in nature would be a rock that contains both early-forming mafic minerals (such as olivine, pyroxene, and amphibole) and late-forming felsic minerals (such as plagioclase feldspar, quartz, and potassium feldspar) together in the same rock. Because these minerals crystallize out at different temperatures and pressures, it is unlikely that they would be found together in the same rock unless there was some form of re-melting or re-crystallization that brought them together.

To know more about magma, visit:

https://brainly.com/question/988610

#SPJ4

The total distance from base camp to the sensor is 4.23 km.

To learn more about The angle of inclination refer to:

https://brainly.com/question/29723347

#SPJ1

that both balls will experience an elastic collision before rebounding to the same height after being launched from rest at the an altitude of 5.0 meters with a mass of one kilo gram.

Head-on collisions between projectiles and immobile objects of same mass result in The target will continue to travel away in the same pace after the missile stops. The velocities, or speeds, are switched as a result, and the momentum gets switched as well.

Obviously, gravity! Gravity takes over as soon as a roller coaster peaks the very first significant hill, forcing the ride to descend at a constant pace of 9.8 m per second squared.

to know more about velocities visit:

https://brainly.in/question/54346754

#SPJ1

(a) 10.2 inches/min = 0.2617 m/s (1 inch = 2.54 cm and 1 minute = 60 seconds).This can be expressed in SI units by converting inches to centimeters and minutes to seconds.

SI units, or the International System of Units, is the standard system of measurement used in science and technology. The SI system is based on seven base units and two supplementary units, with each unit representing a certain physical quantity. The seven base units are the metre for length, the kilogram for mass, the second for time, the ampere for electric current, the kelvin for temperature, the candela for luminous intensity, and the mole for the amount of substance. The

(b) 4.81 slugs = 21.2945 kg (1 slug = 14.59 kg).
This can be expressed in SI units by converting slugs to kilograms.
(c) 3.02 lb = 1.36635 kg (1 lb = 0.45359 kg).
This can be expressed in SI units by converting pounds to kilograms.
(d) 73.1 ft/s2 = 22.3127 m/s2 (1 foot = 0.3048 m).
This can be expressed in SI units by converting feet to meters.
(e) 0.0234 lb s/ft2 = 0.104851 kg/m2 (1 lb = 0.45359 kg and 1 foot = 0.3048 m).
This can be expressed in SI units by converting pounds to kilograms, feet to meters and seconds to seconds.

To learn more about SI units
https://brainly.com/question/12077224
#SPJ4

Final velocity is vf = 55 m/s.

In this case, we are using the concept of impulse and change in momentum.

Ft = m(vf – vi), where vf is the final velocity and vi is the initial velocity.

Substituting in the given values with units:

(10 N)(10 s) = (2 kg)(vf – 5 m/s)

so the final velocity = vf = 55 m/s.

In Newtonian mechanics, an object's mass and velocity are combined to form momentum, more precisely linear momentum or translational momentum. It has both a magnitude and a direction, making it a vector quantity. If an item has a mass of m and a velocity of v (also a vector quantity).

The kilogramme metre per second (kg m/s), or newton-second in the International System of Units (SI), is the unit used to measure momentum.

The rate of change of a body's momentum is equal to the net force exerted on it, according to Newton's second law of motion. Depending on the frame of reference, momentum is a conserved quantity in any inertial frame, which means that if a closed system is not impacted by external force.

Learn more about momentum here: https://brainly.com/question/402617

#SPJ4