Answer:
N = 23.4 N
Explanation:
After reading that long sentence, let's solve the question
The contact force is the so-called normal in this case we can find it by writing the translational equilibrium equation for the y axis
N - w₁ -w₂ =
N = m₁ g + m₂ g
N = g (m₁ + m₂)
let's calculate
N = 9.8 (0.760 + 1.630)
N = 23.4 N
This is the force of the support of the two blocks on the surface.
A 30.0 uC charge is moved 5.00 m West in an electric field of 4000 V/m pointing 40.0° North of East. What potential difference did the charge move through?
Answer:
20000sin(40) V
Explanation:
Consider component to the east of electric field:
[tex]E_{x} =4000 sin(40)[/tex]
The charge move along this component for 5 meter
Potential difference:
[tex]5E_{x} =20000sin(40)[/tex] = 12900 V (corr, to 3 sig,fig.)
The potential difference through which the charge moved is approximately 20.0 V.
To calculate the potential difference (ΔV) through which the charge moved, we can use the formula:
ΔV = q * E * d * cos(θ)
where:
q = charge = 30.0 uC = 30.0 x 10⁻⁶ C (converted to coulombs)
E = electric field = 4000 V/m
d = displacement = 5.00 m
θ = angle between the electric field and the displacement = 40.0°
Now, substitute the values into the formula:
ΔV = (30.0 x 10⁻⁶ C) * (4000 V/m) * (5.00 m) * cos(40.0°)
First, convert the angle to radians:
θ_radians = 40.0° * (π/180) ≈ 0.6981 radians
Now, calculate ΔV:
ΔV = (30.0 x 10⁻⁶ C) * (4000 V/m) * (5.00 m) * cos(0.6981) ≈ 0.02 V
So, the potential difference through which the charge moved is approximately 20.0 V.
To learn more about potential difference, here
https://brainly.com/question/23716417
#SPJ2
Explain how a common housecat gets “worms.”explain(science)
Answer:
Ingenstion
Explanation:
The most common tapeworms that infect cats worldwide are Dipylidium caninum and Taenia taeniaeformis. Dipylidium caninum is transmitted to cats by fleas. The immature fleas larvae ingest the eggs of the worm, but infection is then passed on to a cat when it swallows an infected flea during grooming.
Answer:
The most common worms that housecats get are tapeworms. The housecats always lick their fur to clean them. The tapeworms love where it is damp. After the housecats clean their fur, they will play in the house sometimes they will roll on the floor. Then they get tapeworm eggs, after the eggs hatch the tapeworm will live on the fur of the cats.
Explanation:
What power rating of resistors would you use in the application required it to handle
0.6W?
I would use a resistor rated for 1 W or more. Not less.
The power rating of a resistor that would be used in application that requires 0.6 W must be greater than 0.6 W.
Electrical powerThe electrical power of an appliance shows the rating of the appliance, in terms of energy consumed at a given period of time.
Electrical power is calculated as follows;
P = IV
where;
V is the voltage I is the current[tex]P = (\frac{V}{R} )V\\\\P = \frac{V^2}{R}[/tex]
Thus, the power rating of a resistor that would be used in application that requires 0.6 W must be greater than 0.6 W.
Learn more about electric power here: https://brainly.com/question/25781540
State four factors affecting thermal conductivity
Answer:
∙ Temperature
∙ Concentration of electrolyte
∙ Nature of the electrolyte added
∙ Nature of solvent and its viscosity
Explanation:
What are the properties of fourth matter plasma?
[tex] \\ [/tex]
Like gases, plasmas have no fixed shape or volume, and are less dense than solids or liquids. But unlike ordinary gases, plasmas are made up of atoms in which some or all of the electrons have been stripped away and positively charged nuclei, called ions, roam freely.
[tex] \\ [/tex]
Hope It Helps!
If a biker rides west for 50 miles from his starting position, then turns and bikes back east for 80 miles. What is his displacement?
Answer:
Displacement = 30 miles due east.
Explanation:
Let the distance due west be A
Let the distance due east be B
Given the following data;
A = 50 miles
B = 80 miles
To find the displacement;
Displacement can be defined as the change in the position of a body or an object. It is a vector quantity because it has both magnitude and direction.
Thus, the displacement would be calculated by subtracting distance A from distance B because the rider rode in opposite directions.
Displacement = B - A
Displacement = 80 - 50
Displacement = 30 miles due east.
The spectral classification of Antares is
Answer:
M1.5Iab-Ib
Explanation:
Consider the following scenario. A car for which friction is not negligible accelerates from rest down a hill, running out of gasoline after a short distance (see below). The driver lets the car coast farther down the hill, then up and over a small crest. He then coasts down that hill into a gas station, where he brakes to a stop and fills the tank with gasoline. Identify the forms of energy the car has, and how they are changed and transferred in this series of events.
Answer:
1) U-> K +W
2) K -> W
Explanation:
In this exercise, care must be taken as they indicate that the friction force (rubbing) is not negligible.
1 part at the top of the hill the car has gravitational potential energy, which is transformed in a part into kinetic energy and another part into heat by the work of the friction force that opposes the movement.
2 part when the other hill rises it loses kinetic energy that is transformed into gravitational potential energy and part in heat due to the work of the friction force on this hill.
3rd part in the last descent all the gravitational potential energy is transformed into kinetic energy and the application of the brakes is transformed into heat due to the negative lock of the friction force and filled with gasoline that has chemical energy that can be transformed in the engine.
A ball is thrown vertically downward from the top of a 37.4-m-tall building. The ball passes the top of a window that is 15.4 m above the ground 2.00 s after being thrown. What is the speed of the ball as it passes the top of the window?
Answer:
v= 20.8 m/s
Explanation:
Assuming no other forces acting on the ball, from the instant that is thrown vertically downward, it's only accelerated by gravity, in this same direction, with a constant value of -9.8 m/s2 (assuming the ground level as the zero reference level and the upward direction as positive).In order to find the final speed 2.00 s after being thrown, we can apply the definition of acceleration, rearranging terms, as follows:[tex]v_{f} = v_{o} + a*t = v_{o} + g*t (1)[/tex]
We have the value of t, but since the ball was thrown, this means that it had an initial non-zero velocity v₀.Due to we know the value of the vertical displacement also, we can use the following kinematic equation in order to find the initial velocity v₀:[tex]\Delta y = v_{o} *t + \frac{1}{2} * a* t^{2} (2)[/tex]
where Δy = yf - y₀ = 15.4 m - 37.4 m = -22 m (3)Replacing by the values of Δy, a and t, we can solve for v₀ as follows:[tex]v_{o} = \frac{(\Delta y- \frac{1}{2} *a*t^{2})}{t} = \frac{-22m+19.6m}{2.00s} = -1.2 m/s (4)[/tex]
Replacing (4) , and the values of g and t in (1) we can find the value that we are looking for, vf:[tex]v_{f} = v_{o} + g*t = -1.2 m/s - (9.8m/s2*2.00s) = -20.8 m/s (5)[/tex]
Therefore, the speed of the ball (the magnitude of the velocity) as it passes the top of the window is 20.8 m/s.An object is placed in material a at point P, as shown in the diagram. The light is refracted when it strikes the interface with material b. When viewed from material b, at which point will the image appear?
What body system,
respiratory system
Circulatory system
Digestive system
Nervous system
Affects ulcer disease and heartburn.
Please do this quick it is due please. I will make brainlest and give out extra points
Affects ulcer disease and heartburn.
Please do this quick it is due please. I will make brainlest and give out extra points!
Answer:
Digestive system
Explanation:
ulcer affect anywhere in the digestive system
Digestive system.
Since the acids in your food break down with the chemicals in your stomach, it can give you heartburn and also, ulcer disease happens in your stomach so the only correct answer would be Digestive System. I would like to say that the person with the profile name BigPapa who commented on my answer deserves a lot of credit, and thanks if you see this.
-R3TR0 Z3R0
A Gaussian surface consists of a bottom surface made of a flat disk of radius R, in the horizontal plane centered on the origin and a top surface consisting of a hemisphere of the same radius R. A dipole is arranged as show where the charges are q both plus and minus and the separation is a. a)(5 points) What is the signof the electric flux FEthrough the entire Gaussian surface
Answer:
electric flux through the entire Gaussian surface will be positive ( + )
Explanation:
The dipole is surrounded by Gaussian surface of charge q
The electric flux will be positive
i.e. Ф = E. ds since the surface is a close one the direction of the area outwardly will be positive . therefore the angle between E and A < 90°
Hence the electric flux through the entire Gaussian surface will be positive
A car with mass m travels over a hill with a radius of curvature of r at a speed of 15 m/s. What is the normal force on the car when the car is at the top of the hill?
Answer:
zero
Explanation:
The computation of the normal force is shown below:
As we know that
F_c = mg - N
F_c = mv^2 ÷ r
N = mg - mv^2 ÷ r
N = m(g - v^2 ÷ r)
Assume that
The mass of the car is 1200 kg
And, r = 10 m
So,
= 1200 (9.8 - 15^2 ÷ 10)
= -15240 N
Since it comes in negative so the normal force would be zero
Two long parallel wires 20 cm apart carry currents of 5.0 A and 8.0 A in the between the two wires where the magnetic field is zero?
a. yes, midway between the wires
b. yes, 12 cm from the 5-A wire
c. yes, 7.7 cm from the 5-A wire
d. no
Answer:
c. yes, 7.7 cm from the 5-A wire
Explanation:
Given;
distance between the two wires, r = 20 cm = 0.2 m
first current, I₁ = 5.0 A
second current, I₂ = 8.0 A
The magnetic field due to the two wires occurs in different directions and it can be zero at this region.
Let x be the distance from 5 A wire where the magnetic field is zero.
[tex]B = \frac{\mu_o}{2\pi} [\frac{I_1}{x} -\frac{I_2}{r-x} ] = 0\\\\ \frac{\mu_o}{2\pi} [\frac{I_1}{x} -\frac{I_2}{r-x} ] = 0\\\\ \frac{\mu_o}{2\pi} [\frac{5}{x} -\frac{8}{0.2-x} ] = 0\\\\\frac{5}{x} -\frac{8}{0.2-x} = 0\\\\\frac{5}{x} = \frac{8}{0.2-x}\\\\5(0.2-x) = 8x\\\\1 -5x = 8x\\\\1 = 5x \ + \ 8x\\\\1 = 13x\\\\x = \frac{1}{13} \\\\x = 0.077 \ m\\\\x = 7.7 \ cm[/tex]
Therefore, the correct option is c. yes, 7.7 cm from the 5-A wire
A book is moved once around the perimeter of a tabletop with dimensions 1.2 m x 1.8 m.
(a) If the book ends up at its initial position, what is its displacement
(b) What is the distance traveled?
Answer:
a) 0m
b) 6m
Explanation:
First, we need to remember:
Displacement: Difference between final and initial position.
Distance traveled: Total distance traveled.
a) If the final position is the same as the initial position, then:
final position = initial position
And we know that:
displacement = final position - initial position = 0
Then the displacement of the book is zero.
b)
We can assume that the book traveled along the perimeter of the table.
The table is a rectangle of width 1.2m and length 1.8m
Remember that for a rectangle of width W and length L, the perimeter is:
P = 2*L + 2*W
Then the perimeter of the table is:
P = 2*1.2m + 2*1.8m = 6m
This means that the distance traveled by the book is 6 meters.
A 10-kg rock falls from a height of 8-m above the ground. What is the kinetic energy of the rock just before it hits the ground?
Answer: 800
Explanation:
1/2 x m x v^2 = m x g x h
KE = 10 x 10 x 8
KE= 800
The energy of the body by the virtue of its motion is known as the kinetic energy of the body. The kinetic energy of the rock just before it hits the ground will be 784.8 J.
What is kinetic energy?The energy of the body by the virtue of its motion is known as the kinetic energy of the body. It is defined as the product of half of mass and square of the velocity.
According to the law of conservation of energy, energy can not be created nor be destroyed can be transferred from one form to another form.
Kinetic energy= potential energy
Kinetic energy= mgh
Kinetic energy= 10×9.81×8
Kinetic energy=784.8 J
Hence the kinetic energy of the rock just before it hits the ground will be 784.8 J.
To learn more about kinetic energy refer to the link;
brainly.com/question/999862
If the magnitude of the cross product of two vectors is one-half the dot product of the same vectors, what is the angle between the two vectors?
Answer:
26.57 degrees
Explanation:
Let the two vectors be a and b
The dot product of two vectors is expressed as;
a.b = |a||b|cosθ
The cross product is expressed as;
a×b = |a||b|sinθ
If the magnitude of the cross product of two vectors is one-half the dot product of the same vectors, then;
|a×b| = 1/2|a.b|
|a||b|sinθ = 1/2|a||b|cosθ
sinθ = 1/2cosθ
2sinθ = cosθ
sinθ/cosθ = 1/2
tanθ = 1/2
θ = arctan(1/2)
θ = 26.57 degrees
Hence the angle between the two vectors is 26.57 degrees
Metals are amazing, and they are all around us. You can probably easily identify them by their shiny surfaces and tinny sound when you tap them.
a. True
b. False
Answer:
a. True
Explanation:
Metals are amazing, and they are all around us. You can probably easily identify them by their shiny surfaces and tinny sound when you tap them.
Generally, metals are mainly hard, shiny, and can be hammered into thin sheets. Also, another property of a metal is that, it is a good conductor of heat and even electricity because there valence (outer) electrons are delocalized. Some examples of chemical elements that are metals are iron, gold, sodium, silver, copper etc.
Suppose you need to design a clipper circuit to clip off the portions of an input voltage that fall above +5 V or below +2 V. Assume that diodes having a constant forward drop of 0.7 V are available. Ideal Zener diodes of any breakdown voltage required are available. Dc voltage sources of any value needed are available.
Answer:
attached below
Explanation:
The required design for a clipper circuit is attached below
From the attached circuit
It can be seen that the battery voltage needs to be high so that it will be in forward bias considering the assumption that the diodes have a constant forward drop of 0.7 V.
hence 4.3 has to be >2.7
What is the cost, in dollars, of heating the hot tub, assuming 75.0% efficiency to account for heat transfer to the surroundings?
Answer:
$ 5.93
Explanation:
If we are to put into consideration the following factors even though it was not all stated in the question.
What is the cost of heating a hot tub containing 1500 kg of water from 10.0°C to 40.0°C, assuming 75.0% efficiency to take heat loss to surroundings into account? The cost of electricity is ¢8.50/kW·h.
Q = mc∆T .........1
Where m is the mass of water = 1500kg
C is the specific heat capacity of water = 4.184
∆T = temperature change
= 40° - 10°
= 30°
Now, substitute the values into equation 1
= 1500×4.184×30
= 188280
Q in kw/s
= 188280/3600
= 52.3kw/hr
Efficiency = 75%
= 75/100
= 0.75
Hence we have
52.3/0.75
= 69.73kw/hr
C = Q × cost per kw/hr
C = 69.73× $8.5/100
C = 5.92705
C =$ 5.93
Hence, the cost of heating the hot tub is $ 5.93
Which statements accurately describe sound waves? Check all that apply.
Sound waves are transverse waves.
Sound waves require a medium to transfer energy.
Sound waves start with a vibration.
Energy from a vibration creates a mechanical wave.
Sound can be heard as soon as an object begins vibrating.
Answer:
the answers are
b) sound waves require a medium to transfer energy
c) sound waves start with a vibration
d) energy from a vibration creates a mechanical wave
Explanation:
i just did this and got 100%, edge 2021
Following statements are true for sound wave,
Sound waves require a medium to transfer energy.Sound waves start with a vibration.Energy from a vibration creates a mechanical wave.In sound waves,
Energy is transferred through vibration of air particles or particles of a solid through which the sound travels.As sound passes through air (or any fluid medium), the particles of air do not vibrate in a transverse mannerA transverse wave is a wave whose oscillations are perpendicular to the direction of the wave's advance.Learn more:
https://brainly.com/question/13105733
Which of the following is a disadvantage of using solar energy
Please provide options.
Answer:
It requires a high initial investment
Explanation:
A simplified model of a bungee jump can be analyzed in two sections: a freefall section in which the bungee cord has not yet begun stretching and a section in the lower portion of the jump in which the bungee cord stretches and exerts a force on the jumper. The cord is assumed to exert zero force on the jumper until its length exceeds its maximum unstretched length. Determine the maximum unstretched length of a bungee cord of spring constant 100 N/m such that a 70-kg jumper will not hit the ground when jumping from a height of 45 m.
Answer:
[tex]20.14\ \text{m}[/tex]
Explanation:
m = Mass of person = 70 kg
k = Spring constant = 100 N/m
h = Total length of the bungee cord = 45 m
The energy balance of the system is
[tex]mgh=\dfrac{1}{2}kx^2\\\Rightarrow x=\sqrt{\dfrac{2mgh}{k}}\\\Rightarrow x=\sqrt{\dfrac{2\times 70\times 9.81\times 45}{100}}\\\Rightarrow x=24.86\ \text{m}[/tex]
Maximum unstretched length would be [tex]h-x=45-24.86=20.14\ \text{m}[/tex].
What type of bond is CO2?||
Answer:
Lol
Explanation:
A bar magnet is attached solidly to a frictionless surface and its length is aligned with the x axis.To the right of the first magnet a short distance away is a second bar magnet with its center placed on the x axis and its length perpendicular to the x axis.The second magnet is free to move.Once placed in position at rest,which best describes the initial motion of the second magnet?
a. The magnet will move away from the fixed magnet.
b. The magnet will not move.
c. The magnet will move toward the fixed magnet.
d. The magnet will start to rotate.
Answer:
the correct answer is D
Explanation:
For this exercise we must remember that the poles of the same if not repel each other and the poles of different signs attract.
With this, let's analyze the situation presented.
The two magnets are perpendicular, with the second magnet to the right of the first.
We have two cases:
* first magnet with the north pole to the right
If the north of the second magnet is upwards there is a repulsion and the south pole of the second magnet there is an attraction with the north pole of the first magnet, so it would have a force that has to rotate the second magnet.
The force with the south pole of the first magnet that is at a greater distance is less, so the resultant of force is determined by the nearest poles.
If the poles of the second magnet are reversed, that is, the South pole up and the North pole down, the same result is obtained, but with a twist in the opposite direction.
* first magnet with the south pole to the right
Repels with the south pole of the second magnet and attracts with the north of the second magnet
therefore in both possibilities the second magnet acquires a rotational movement
Consequently the correct answer is D
Ocean waves crash on the beach at a velocity of 3.5 m/s. If the distance between the crests of each wave is 4 m, find the frequency of the waves.
a. 0.0088 Hz
b. 14.0 Hz
c. 1.14 Hz
d. 0.88 Hz
Answer:
d
Explanation:
velocity=frequency × wavelength
frequency=speed/wavelength
frequency=3.5÷4
=0.875~0.88
The frequency of the waves is (d) 0.88 Hz. So, correct answer is option (d).
What is frequency of wave?The frequency of a sinusoidal wave is the number of full oscillations performed by any wave constituent in a unit of time. According to the definition of frequency, if a body is moving periodically, it has completed one cycle after going through a number of situations or postures and then returning to its initial position. Therefore, frequency is a quantity that describes the rate of oscillation and vibration.
Given parameter,
Velocity of the waves = 3.5 m/s.
distance between the crests of each wave, that is, wavelength of the waves = 4 m.
We know that, for a wave transmission,
velocity of wave =frequency of wave × wavelength of wave
⇒ frequency of wave=speed of wave/wavelength of wave
⇒ frequency of wave =3.5 m/s ÷4m
=0.875 Hz
≈ 0.88 Hz
Hence, the frequency of the waves is 0.88 Hz.
Learn more about frequency here:
https://brainly.com/question/5102661
#SPJ2
help plz! what vibrates in following types of wave motion 1)light wave 2)sound waves 3)x-rays 4)water waves
Answer:
I believe it's 2) sound waves
Explanation:
With sound waves, the energy travels along in the same direction as the particles vibrate. This type of wave is known as a longitudinal wave, so named because the energy travels along the direction of vibration of the particles.
Cesar and Jill went to a field to play soccer. As the ball downward toward Jill, Jill used her foot to kick the ball and keep it in play. Cesar realized he could apply scientific principles to a soccer game. Which of the following best describes the scientific principle that Cesar observes as Jill kicks the ball?
A. An unbalanced force has no effect on the ball.
B. Gravity on the ball is equal to the force of friction.
C. A net force of zero changes the direction of the ball.
D. Unbalanced forces change the ball’s speed and the direction of motion.
Answer:
D
Explanation:
If a 9851.6 kg vw van is moving at a speed of 16.7 m/s, what is the momentum? Round answer to the nearest hundredth
Answer:
the momentum is 164500 kg m/s
Explanation:
The computation of the momentum is shown below:
As we know that
Momentum is
= mass × velocity
= 9851.6 kg × 16.7 m/s
= 164522 kg·m/s
= 164500 kg m/s
hence, the momentum is 164500 kg m/s
HELP PLS!
(LOOK AT THE PICTURE)