Answer:
Thrust.
Explanation:
hope this helps you :)
Answer:
thrust
Explanation:
Select the oxidation reduction reactions??
Answer:
Explanation:
1 ) Cl₂ + ZnBr₂ = ZnCl₂ + Br₂
In this reaction , oxidation number of Cl decreases from 0 to -1 so it is reduced and oxidation number of Br increases from -1 to 0 so it is oxidised . Hence this reaction is oxidation - reduction reaction .
2 )
Pb( ClO₄)₂ + 2KI = PbI₂ + 2KClO₄
In this reaction oxidation number of none is changing so it is not an oxidation - reduction reaction.
3 )
CaCO₃ = CaO + CO₂
In this reaction also oxidation number of none is changing so it is not an oxidation - reduction reaction.
So only first reaction is oxidation - reduction reaction.
2nd option is correct.
A sample of gold weighs 1.2 oz. The sample is pounded into a thin rectangular sheet with an area of 400. sq. ft. The density of gold is 19.3 grams per cm3. What is the thickness of the foil in centimeters?Given: 28.35 g = 1 oz, 1 ft = 12 inches, 1 inch = 2.54 cm
Answer:
thickness of the gold sheet = 4.74 * 10⁻⁶ cm
Explanation:
mass of gold sample = 1.2 oz,; area of rectangular gold sheet = 400 sq. ft
Converting mass of gold from oz. to g
1 oz. = 28.35 g
mass of gold sample in grams = 1.2 * 28.35 g = 34.02 g
Converting from feet to cm;
1 feet = 12 * 2.54 cm = 30.48 cm
1 sq. ft = (30.48)² = 929.0304 cm²
area of gold in cm² = 400 * 929.0304 cm² = 371612.16 cm²
Since the density of a solid is constant
Density = mass/volume
Volume = mass/density
where volume =area * thickness
therefore, area * thickness =mass/density
thickness = mass/(density * area)
substituting the value; thickness = 34.02 g/(19.3 gcm⁻³ *371612.16 cm²)
thickness of the gold sheet = 4.74 * 10⁻⁶ cm
What causes the electrons to flow through a wire in a lead-acid battery?
Answer:
The potential difference between the cathode and anode are set up from the chemical reaction. Inside the battery electrons are pushed by the chemical reaction toward the positive end creating a potential difference. It is this potential difference that drives the electrons through the wire.
Enter an equation for the formation of CaCO3(s) from its elements in their standard states. Enter any reference to carbon as C(s). Express your answer as a chemical equation. Identify all of the phases in your answer.
Answer:
CaF2 + CO3- ----> CaCO3 + 2 F-
Explanation:
The chemical compounds found on the left side of the date are the reagents and those found on the right are the products, where calcium carbonate appears.
Calcium carbonate is a quaternary salt
When solutions of hydrochloric acid and sodium hydroxide are mixed, a chemical reaction occurs forming aqueous sodium chloride and water. What would you expect to observe if you ran the reaction in the laboratory
Answer:
a change in temperature would be observed(ΔH is -ve)
Explanation:
Hydrochloric acid react with sodium hydroxide to give salt(sodium chloride) and water
HCl(aq) + NaOH(aq) =====> NaCl(aq) + H2O(l)
There would be no notable change since sodium chloride dissolved in water but there would be a change in temperature.
Since neutralization is exothermic(heat is evolved), therefore ΔH is negative
g A laboratory analysis of an unknown compound found the following composition: C 75.68% ; H 8.80% ; O 15.52%. What is the empirical formula of the compound?
Answer:
THE EMPIRICAL FORMULA FOR THE UNKNOWN COMPOUND IS C7H9O
Explanation:
The empirical formula for the unknown compound can be obtained by following the processes below:
1 . Write out the percentage composition of the individual elements in the compound
C = 75.68 %
H = 8.80 %
O = 15.52 %
2. Divide the percentage composition by the atomic masses of the elements
C = 75 .68 / 12 = 6.3066
H = 8.80 / 1 = 8.8000
O = 15.52 / 16 = 0.9700
3. Divide the individual results by the lowest values
C = 6.3066 / 0.9700 = 6.5016
H = 8.8000 / 0.9700 = 9.0722
O = 0.9700 / 0.9700 = 1
4. Round up the values to the whole number
C = 7
H = 9
O = 1
5 Write out the empirical formula for the compound
C7H90
In conclusion, the empirical formula for the unknown compound is therefore C7H9O
How are sodium (Na) and potassium (K) similar?
O
A. They rarely react.
B. They are hard metals.
O O
C. They are highly reactive.
D. They are soft nonmetals.
Answer:
They are also relatively soft metals: sodium and potassium can be cut with a butter knife.
Answer:A
Explanation:
Which correctly lists three characteristics of minerals?
solid, crystal structure, definite chemical composition
organic, crystal structure, definite chemical composition
human-made, solid, organic
crystal structure, definite chemical composition, human-made
Answer:a
Explanation:
The three characteristics of minerals are that they are solid, have definite crystal structure and definite chemical composition.
What are minerals?Minerals are defined as a chemical compound which has a well -defined composition and possesses a specific crystal structure.It occurs naturally in the pure form.
If a compound occurs naturally in different crystal structure then each structure is considered as a different mineral.The chemical composition of a mineral varies depending on the presence of small impurities which are present in small quantities.
Some minerals can have variable proportions of two or more chemical elements which occupy equivalent position in the crystal structure.It may also have variable composition which is split into separate species.
Physical properties of minerals include color,streak, luster,specific gravity and cleavage.
Learn more about minerals ,here:
https://brainly.com/question/1333886
#SPJ6
Steam reforming of methane ( ) produces "synthesis gas," a mixture of carbon monoxide gas and hydrogen gas, which is the starting point for many important industrial chemical syntheses. An industrial chemist studying this reaction fills a tank with of methane gas and of water vapor, and when the mixture has come to equilibrium measures the amount of carbon monoxide gas to be .Calculate the concentration equilibrium constant for the steam reforming of methane at the final temperature of the mixture. Round your answer to significant digits.
The given question is incomplete, the complete question is:
Calculating an equilibrium constant from a partial equilibrium... Steam reforming of methane (CH) produces "synthesis gas," a mixture of carbon monoxide gas and hydrogen gas, which is the starting point for many important industrial chemical syntheses. An industrial chemist studying this reaction fills a 25.0L tank with 8.0 mol of methane gas and 1.9 mol of water vapor, and when the mixture has come to equilibrium measures the amount of carbon monoxide gas to be 1.5 mol. Calculate the concentration equilibrium constant for the steam reforming of methane at the final temperature of the mixture. Round your answer to 2 significant digits.
Answer:
The correct answer is 2.47.
Explanation:
Based on the given information, the equation for the synthesis gas is,
CH₄ (g) + H₂O (g) ⇔ CO (g) + 3H₂ (g)
Based on the given information, 25.0 L is the volume of the tank, the concentration of CH₄ is 8.0 mol, the concentration of water vapor is 1.9 mol, and the concentration of CO gas is 1.5 mol.
Therefore, 25 L of the solution comprise 8.0 mole of CH₄. So, 1 L of the solution will comprise 8.0 / 25 mole CH₄,
= 0.32 mole of CH₄
Thus, the concentration of CH₄ or [CH₄] will be 0.32 mole/L or 0.32 M.
Similarly, the concentration of H₂O or [H₂O] will be 1.9/25 = 0.076 M
and [CO] is 1.5/25 = 0.06 M
The concentration equilibrium constant for the steam will be,
Kc = [CO] pH₂ / [CH₄] [H₂O] (Here pH₂ is the partial pressure of H₂)
Now lets us assume that the reaction has taken place in a constant atmospheric pressure, therefore, pH₂ will be equal to 1.
= 0.06 M/0.32 M × 0.076 M
= 2.47
How many moles of gaseous boron trifluoride, BF3, are contained in a 4.3410 L bulb at 788.0 K if the pressure is 1.220 atm What is the complete ground state electron configuration for the neon atom
Answer:
n= 0.08186
{He}2s^2 2p^6
Explanation:
PV=nRT
n=PV/RT
n= (1.220 atm)(4.3410 L) / (0.0821 atm*L/mol*K)(788.0 K)
n=0.08186
As for the electron configuration:
Ne:
{He} 2s^2 2p^6
or long hang:
1s^2 2s^2 2p^6
[tex][Ne]=1s^22s^22p^{10}[/tex]
Given:
A gaseous boron trifluoride in a 4.3410 L bulb at 788.0 K, if the pressure is 1.220 atm.Neon atom.To find:
The moles of gaseous boron trifluoride in a container.The electronic configuration of neon in the ground state.1.
The pressure of the gaseous boron trifluoride = P = 1.220 atm
The volume of the gas in bulb = V = 4.3410 L
The moles of the gaseous boron trifluoride = n
The temperature of gaseous boron trifluoride = T = 788.0 K
Using an ideal gas equation:
[tex]PV = nRT\\\\1.220 atm\times 4.3410 L=n\times 0.0821 atm L/mol K\times 788.0 K\\\\n=\frac{1.220 atm\times 4.3410 L}{0.0821 atm L/mol K\times 788.0 K}\\\\n=0.08186 mol[/tex]
The moles of gaseous boron trifluoride is 0.08186 moles.
2.
The atomic number of neon atom = 10
The electronic configuration in the ground state is the most stable arrangement of the electrons in the lowest energy levels.
The ground state electronic configuration of neon is:
[tex][Ne]=1s^22s^22p^{10}[/tex]
Learn more about the ideal gas equation and electronic configuration here:
brainly.com/question/1056445?referrer=searchResults
brainly.com/question/5524513?referrer=searchResults
why homoannular diene in uv spectrometry have higher wavlenth than hetroannular diene?
Answer:
Homoanular dienes have a greater base value than heteroanular dienes
Explanation:
Woodward in 1945 gave a set of rules relating the wavelength of maximum absorption to the structure of a compound. These rules were modified by Fieser in 1959. These sets of rules describe the absorption of organic molecules in the UV region of the electromagnetic spectrum.
Each system of diene or triene has a given fixed value at which maximum absorption is expected to occur according to Woodward rules. This given fixed value is called the base or parent value. If the two double bonds are trans to each other, the diene is said to be transoid. If the two double bonds belong to different rings, the system is said to be heteroanular and the base value in each case is 215nm. If the double bonds are cis to each other (cisoid), or the two double bonds are in the same ring (homoanular), then the base value is 253nm.
Since λmax = base value + ∑ substituent contributions + ∑ other contributions, if the other contributions are not very significant, homoanular diene will have a greater λmax because of its larger base value compared to heteroanular diene. This correlates well with the fact that conjugated systems absorb at a longer wavelength.
Consider the equilibrium reaction. 4A+B↽−−⇀3C After multiplying the reaction by a factor of 2, what is the new equilibrium equation?
For the reaction, 2SO2(g) + O2(g) <--> 2SO3(g), at 450.0 K the equilibrium constant, Kc, has a value of 4.62. A system was charged to give these initial concentrations, [SO3] = 0.254 M, [O2] = 0.00855 M, [SO2] = 0.500 M. In which direction will it go?
Answer:
To the left.
Explanation:
Step 1: Write the balanced reaction at equilibrium
2 SO₂(g) + O₂(g) ⇄ 2 SO₃(g)
Step 2: Calculate the reaction quotient (Qc)
Qc = [SO₃]² / [SO₂]² × [O₂]
Qc = 0.254² / 0.500² × 0.00855
Qc = 30.2
Step 3: Determine in which direction will proceed the system
Since Qc > Kc, the system will shift to the left to attain the equilibrium.
A 25.0-mL sample of 0.150 M hydrazoic acid, HN3, is titrated with a 0.150 M NaOH solution. What is the pH after 13.3 mL of base is added? The Ka of hydrazoic acid = 1.9 x 10-5.
Answer:
pH ≅ 4.80
Explanation:
Given that:
the volume of HN₃ = 25 mL = 0.025 L
Molarity of HN₃ = 0.150 M
number of moles of HN₃ = 0.025 × 0.150
number of moles of HN₃ = 0.00375 mol
Molarity of NaOH = 0.150 M
the volume of NaOH = 13.3 mL = 0.0133
number of moles of NaOH = 0.0133× 0.150
number of moles of NaOH = 0.001995 mol
The chemical equation for the reaction of this process can be written as:
[tex]HN_3 + OH- ---> N^-_{3} + H_2O[/tex]
1 mole of hydrazoic acid react with 1 mole of hydroxide to give nitride ion and water
thus the new number of moles of HN₃ = 0.00375 - 0.001995 = 0.001755 mol
Total volume used in the reaction = 0.025 + 0.0133 = 0.0383 L
Concentration of [tex]HN_3[/tex] = [tex]\dfrac{0.001755}{0.0383}[/tex] = 0.0458 M
Concentration of [tex]N^{-}_3[/tex] = [tex]\dfrac{ 0.001995 }{0.0383}[/tex] = 0.0521 M
GIven that :
Ka = [tex]1.9 x 10^{-5}[/tex]
Thus; it's pKa = 4.72
[tex]pH =4.72 + log(\dfrac{ \ 0.0521}{0.0458})[/tex]
[tex]pH =4.72 + log(1.1376)[/tex]
[tex]pH =4.72 + 0.05598[/tex]
[tex]pH =4.77598[/tex]
pH ≅ 4.80
The pH of the solution 0.150 M hydrazoic acid after 13.3 mL of NaOH base is added is 4.80.
How we calculate the pH?pH of the given solution will be used by using the following equation:
pH = pKa + log[conjugate base] / [weak acid]
Given chemical reaction will be represented as:
HN₃ + OH⁻ → N₃⁻ + H₂O
Moles will be calculated as:
n = M×V, where
M = molarity
V = volume
Moles of 0.150 M hydrazoic acid = (0.150M)(0.025L) = 0.00375 mol
Moles of 0.150 M NaOH = (0.0133)(0.150) = 0.001995 mol
From the above calculation it is clear that moles of hydrazoic acid is present in excess and it will be:
0.00375 - 0.001995 = 0.001755 mol
And 0.001995 mol of N₃⁻ is preduced by the reaction.
Total volume of the solution = 0.025 + 0.0133 = 0.0383 L
To calculate the pH after titration, first we have to calculate the concentration in terms of molarity of N₃⁻ and HN₃ as:
[N₃⁻] = 0.001995 mol / 0.0383 L = 0.0521 M
[HN₃] = 0.001755 mol / 0.0383 L = 0.0458 M
Ka for HN₃ = 1.9 × 10⁻⁵
pKa = -log( 1.9 × 10⁻⁵ ) = 4.72
On putting all these values on the above equation, we get
pH = 4.72 + log (0.0521) / (0.0458)
pH = 4.80
Hence, pH of the solution is 4.80.
To know more about pH, visit the below link:
https://brainly.com/question/10313314
Arrange the following set of atoms in order of decreasing atomic size: Sn, I, Sr
Which atom has the largest atomic size?
a) Sn
b) I
c) Sr
Which atom has the smallest atomic size?
a) Sn
b) I
c) Sr
The constant pressure molar heat capacity of argon, C_{p,m}C
p,m
, is
20.79\text{ J K}^{-1}\text{ mol}^{-1}20.79 J K
−1
mol
−1
at 298\text{ K}298 K. What
will be the value of the constant volume molar heat capacity of argon,
C_{V,m}C
V,m
, at this temperature?
Answer:
Constant-volume molar heat capacity of argon is 12.47 J K ⁻¹mol⁻¹
Explanation:
Argon is a monoatomic gas that behaves as an ideal gas at 298K.
Using the first law of thermodinamics you can obtain:
Work, Q, for constant pressure molar heat capacity,CP:
CP = (5/2)R
For constant-volume molar heat capacity,CV:
CV = (3/2)R
That means:
2CP/5 = 2CV/3
3/5 = CV / CP
As CP of Argon is 20.79 J K ⁻¹mol⁻¹, CV will be:
3/5 = CV / CP
3/5 = CV / 20.79 J K ⁻¹mol⁻¹
12.47 J K ⁻¹mol⁻¹ = CV
Constant-volume molar heat capacity of argon is 12.47 J K ⁻¹mol⁻¹Hypochlorous acid is formed in situ by reaction of aq. sodium hypochlorite solution with acetic acid. Draw balanced chemical equations to show the formation of hypochlorous acid and protonated hypochlorous acid.
Answer:
NaClO + CH₃COOH ----> HClO + CH3CO- + Na
Explanation:
This reaction occurs between the combination of a salt and an acid, that is, an oxide-reduction reaction
Draw the structure 2 butylbutane
Answer:
please look at the picture below.
Explanation:
Perform the following
mathematical operation, and
report the answer to the correct
number of significant figures.
5.446 x 0.14156
A piece of bismuth with a mass of 22.5 g is submerged in 46.3 cm3 of water in a graduated cylinder. The water level increases to 48.6 cm3. What is the density of indium to the proper number of significant figures
Answer:
[tex]\rho = 9.78\frac{g}{cm^3}[/tex]
Explanation:
Hello,
In this case, in order to compute the density of bismuth we need to apply the formula:
[tex]\rho =\frac{m_{Bi}}{V_{Bi}}[/tex]
Nonetheless, the volume is computed by the difference:
[tex]V_{Bi}=48.6-46.3=2.30cm^3[/tex]
Therefore:
[tex]\rho = \frac{22.5g}{2.30cm^300}\\\\\rho = 9.78\frac{g}{cm^3}[/tex]
Regards.
The authors state in the general procedures that the reaction was monitored by TLC. How would this be done? What would you spot in each lane? How would you know the reaction was done?
Answer:
Thin Layer Chromatography (TLC) can be used to analyze chemical reactions. During this reaction monitoring, a typical TLC plate would have three spots: the reactant lane, the reaction mixture lane, and a "co-spot" where reaction product would be spotted directly on top of reactant.
The co-spot serves as a reference point and is vital for reactions where reactant and product have similar Rfs, and many other variations of eluent tracking.
To indicate completion of the reaction, the disappearance of a spot (usually the starting reactant) is observed.
warming oceans temperatures directly lead to all of the following except A sea level rising B coral bleaching C ocean deoxigenation D pollution
Answer:
D. pollution
Explanation:
Increase in ocean temperature is one of the major consequence of global warming which directly leads to rise in sea level, coral bleaching and ocean deoxygenation.
Warming ocean temperatures do not leads to pollution directly whereas pollution leads to warming ocean temperatures. So, in the case of pollution, the effect is opposite.
Hence, the correct option is D.
. A compound X, containing C, H, and O was found to have a relative molar mass of 6o
whilst 20.0g of X contained 8.0g of C and 1.33g of H. Calculate the empirical formula
of compound X, and hence determine its molecule formula. show calculation
Answer:
empirical formula = CH2O
molecular formula = C2H4O2
how many moles of a solute is present in 4.00L of an 8.30M solution
Answer:
The number of moles of solute present in 4.00 L of an 8.30 M solution is 33.2
Explanation:
The Molarity (M) or Molar Concentration is the number of moles of solute per liter of solution; in other words it is the number of moles of solute that are dissolved in a given volume.
The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:
[tex]Molarity=\frac{number of moles of solute}{volume}[/tex]
Molarity is expressed in units ([tex]\frac{moles}{liter}[/tex]) or M.
In this case:
molarity= 8.30 Mnumber of moles of solute= ?volume= 4.00 LReplacing:
[tex]8.30 M=\frac{number of moles of solute}{4 L}[/tex]
Solving:
number of moles of solute= 8.30 M* 4 L= 8.30 [tex]\frac{moles}{liter}[/tex] * 4 L
number of moles of solute =33.2
The number of moles of solute present in 4.00 L of an 8.30 M solution is 33.2
Answer:
33.2 is the answer
Explanation:
did the test already :)
Define dew point in complete sentences
What is the electron configuration for N (nitrogen)?
A. 1521p5
B. 1s22s23s 3p
O cly 1s22s22p3
O D. 1s 2s22p 3s
SUBMIT
Answer:
[tex]1s^22s^22p^3[/tex]
Explanation:
Nitrogen has the atomic number = 7
So, No. of electrons = 7
Electronic Configuration:
[tex]1s^22s^22p^3[/tex]
Remember that:
s sub shell holds upto 2 electrons while p sub shell upto 6
The activation energy for the decomposition of HI is 183 kJ/mol. At 573 K, the rate constant was measured to be 2.91 x 10^{-6} M/s. At what temperature in Kelvin does the reaction have a rate constant of 0.0760 M/s
Answer:
[tex]T_2=453.05K[/tex]
Explanation:
Hello,
In this case, the temperature-variable Arrhenius equation is written as:
[tex]\frac{k(T_2)}{k(T_1)}=exp(\frac{Ea}{R}(\frac{1}{T_2}-\frac{1}{T_1} ))[/tex]
Now, for us to solve for the temperature by which the reaction rate constant is 0.0760M/s we proceed as shown below:
[tex]ln(\frac{k(T_2)}{k(T_1)})=\frac{Ea}{R}(\frac{1}{T_2}-\frac{1}{T_1} )\\ln(\frac{0.0760M/s}{0.00000291M/s} )=\frac{183000J/mol}{8.314J/(mol*K)} *(\frac{1}{T_2} -\frac{1}{573K} )\\\frac{1}{T_2} -\frac{1}{573K} =\frac{10.17}{22011.06K^{-1}} \\\\\frac{1}{T_2}=4.62x10^{-4}K^{-1}+\frac{1}{573K}\\\\\frac{1}{T_2}=2.21x10^{-3}K^{-1}\\\\T_2=453.05K[/tex]
Regards.
Which of the following best identifies where long-range order would be found?
ОООО
in amorphous solids
in crystalline solids
in thermal plasmas
in nonthermal plasmas
Answer:
in crystalline solids
Hope this answers your question, good luck
The crystalline solids represent the best identification where the long-range order should be found.
What are crystalline solids?Crystalline solids refer to the solid where the atoms, molecules should be make the arrangement. The smallest & repeated pattern of this solid should be called as the unit cell. The unit cell should be treated as the bricks in the wall which means it should be homogenous in the nature and repeated
Therefore, The crystalline solids represent the best identification where the long-range order should be found.
Learn more about solid here: https://brainly.com/question/17431076
A critical reaction in the production of energy to do work or drive chemical reactions in biological systems is the hydrolysis of adenosine triphosphate, ATP, to adenosine diphosphate, ADP, as described by the reactionATP(aq)+ H2O(l) → ADP(aq)+ HPO4^-2 (aq)for which ΔGrxn = -30.5 kj/mol at 37.0C and pH 7.0. Required:a. Calculate the value of ΔGrxn in a biological cell in which [ATP] = 5.0 mM, [ADP] = 0.30 mM, and HPO4^-2= 5.0mMb. Is the hydrolysis of ATP spontaneous under these conditions?
Answer:
Δ [tex]G_{rxn}[/tex] = −51. 4 kJ/mol
However, since Δ [tex]G_{rxn}[/tex] is negative. The hydrolysis of ATP for this reaction is said to be spontaneous
Explanation:
From the question; The equation for this reaction can be represented as :
[tex]ATP_{(aq)} + H_2O_{(l)} \to ADP_{(aq)}+ HPO_4^{2-}} _{(aq)}[/tex]
where:
[tex]\Delta G ^0 _{rxn} =[/tex]-30.5 kJ/mol
= -30.5 kJ/mol × 1000 J/ 1 kJ
= -30.5 × 10 ⁻³ J/mol
Temperature T = 37 ° C
= (37+273)
= 310 K
pH = 7.0
[ATP] = 5.0 mM
= 5.0mM × 1M/1000mM
= 0.005 M
[ADP] = 0.30 mM
= 0.30 mM × 1M/1000mM
= 0.0003 M
[tex][HPO_4^{2-}}][/tex] = 5.0 mM
= 5.0mM × 1M/1000mM
= 0.005 M
The objective is to calculate the value for Δ [tex]G_{rxn}[/tex] in the biological cell and to determine if the hydrolysis of ATP is spontaneous under these conditions.
Now;
From the equation given; the equilibrium constant [tex]K_{eq}[/tex] can be expressed as:
[tex]K_{eq} = \dfrac{[ADP][ HPO_4^{2-}]} {[ATP]}[/tex]
[tex]K_{eq} = \dfrac{(0.0003 \ M)(0.005 \ M)} {(0.005 \ M)}[/tex]
[tex]K_{eq} = 3*10^{-4}[/tex]
The Δ [tex]G_{rxn}[/tex] in the biological cell can now be calculated as:
Δ [tex]G_{rxn}[/tex] = [tex](-30.5 * 10 ^3 \ J/mol) + (8.314 \ J/mol.K)(310 K ) In ( 3*10^{-4})[/tex]
Δ [tex]G_{rxn}[/tex] = [tex](-30.5 * 10 ^3 \ J/mol) + (-20906.68126)[/tex]
Δ [tex]G_{rxn}[/tex] = −51406.68 J/mol
Δ [tex]G_{rxn}[/tex] = −51. 4 × 10³ J/mol
Δ [tex]G_{rxn}[/tex] = −51. 4 kJ/mol
Thus since Δ [tex]G_{rxn}[/tex] is negative. The hydrolysis for this reaction is said to be spontaneous
2) Which type movement do pivot joints allow?