Answer:
A
Explanation:
The reason it is distillation is due to the fact that we can use distillation to heat the ocean water. As water has a lower boiling point than the salt solution, it evaporates and the salt stays behind.
In Act V, scene ii of Romeo and Juliet, what role does Friar John play in the catastrophe?
He creates a quarantine, which impacts Romeo.
He secretly performs Romeo and Juliet's wedding.
He mistakenly tells Balthasar that Juliet is dead.
He fails to deliver an important letter to Romeo.
Answer:
I believe its the 4th one. He goes to give Romeo the message but before he is able to, Balthasar tells Romeo that Juliet is dead. Friar John just wasn't there in time.
Answer:
D) he fails to give Romeo an important letter
Explanation:
i took the test. edge 2020
What biological sample do home pregnancy tests use to detect pregnancy?
Answer:
The biological sample that pregnancy tests use to detect pregnancy is urine
Answer:
yes
Explanation:
the urine in the the tester will find hormones to determine if pregnant or not
What is the best definition of chemistry?
A. The study of mass, energy, and light
B. The study of life and energy
C. The study of experiments and theories
D. The study of matter, its properties, and its reactions
Balance the chemical equations
Answer:
Explanation:
1). Ca(NO₃)₂ + KI → CaI + K(NO₃)₂
This equation is incorrect.
When Ca⁺⁺ reacts with I⁻, final product is CaI₂
And when K⁺ react with NO₃⁻, final product is KNO₃
Hence the equation will be,
Ca(NO₃)₂ + KI → CaI₂ + KNO₃
Now we have to balance this equation.
Ca(NO₃)₂ + 2KI → CaI₂ + KNO₃
↓
Ca(NO₃)₂ + 2KI → CaI₂ + 2KNO₃
2). Ca(NO₃)₂ + KOH → CaOH + K(NO₃)₂
This equation is incorrect,
Since the reaction of Ca⁺⁺ with OH⁻ gives the final product Ca(OH)₂
And final product of K⁺ and NO₃⁻ is KNO₃
Therefore, the equation will be,
Ca(NO₃)₂ + KOH → Ca(OH)₂ + KNO₃
Now we will balance this equation by changing the coefficients of the molecules until the number of atoms on both the sides become equal.
Ca(NO₃)₂ + KOH → Ca(OH)₂ + 2KNO₃
↓
Ca(NO₃)₂ + 2KOH → Ca(OH)₂ + 2KNO₃
3). Ca(NO₃)₂ + Na₂C₂O₄ → CaC₂O₄ + 2Na(NO₃)₂
This equation is incorrect,
Since the reaction of Na⁺ and NO₃⁻ gives the final product NaNO₃.
Therefore, the correct equation will be,
Ca(NO₃)₂ + Na₂C₂O₄ → CaC₂O₄ + 2NaNO₃
This equation is in the balanced form.
Which is one way that a short-term environmental change will most likely affect organisms within an ecosystem? A)It will lead to larger populations. B)It will lead to speciation. C)It will lead to adaptation. D)It will lead to forced migration.
Answer:
D)It will lead to forced migration.
Explanation:
Forced migration is an involuntary, sudden movement of organisms from one geographical location to another. This is often in response to short term environmental changes such as drought, famine, etc
When an ecosystem suddenly comes under stress due to these short term environmental changes, organisms may not be left with any other choice but to move or go to new locations in the quest for survival. The organisms may not have left the ecosystem in the absence of such short term ecological stress. This is what is meant by forced migration.
Answer:
D forced migration
Explanation:
A 75 lb (34 kg) boy falls out of a tree from a height of 10 ft (3 m). i. What is the kinetic energy of the boy when he hits the ground? Round your answer to the nearest joule. ii. What is the speed of the boy when he hits the ground? Round your answer to two significant figures. iii. Using the conversion factors of 1 m = 1.094 yd and 1 mi = 1760 yd, calculate the speed of the boy in miles per hour when he hits the ground.
Answer:
Kinetic energy of boy just before hitting the ground is [tex]\approx[/tex]1000 J.
Speed of boy just before hitting the ground is 7.67 m/s
or 17.16 mi/hr.
Explanation:
Given that:
Mass of boy = 75lb = 34 kg
Height, h = 10ft = 3m
To find:
Kinetic energy of boy when he hits the ground.
As per law of conservation of energy The potential energy gets converted to kinetic energy.
[tex]\therefore[/tex] Kinetic energy at the time boy hits the ground = Initial potential energy of the boy when he was at the Height 'h'
The formula for potential energy is given as:
[tex]PE = mgh[/tex]
Where m is the mass
g is the acceleration due to gravity, g = 9.8 [tex]m/s^2[/tex]
h is the height of object
Putting all the values:
PE = [tex]34 \times 9.8 \times 3 \approx 1000\ J[/tex]
Hence, Kinetic energy is [tex]\approx[/tex]1000 J.
Formula for Kinetic energy is:
[tex]KE = \dfrac{1}{2}mv^2[/tex]
where m is the mass and
v is the speed
Putting the values and finding v:
[tex]1000 = \dfrac{1}{2}\times 34 \times v^2\\\Rightarrow v^2 = 58.82\\\Rightarrow v = 7.67\ m/s[/tex]
Given that:
1 m = 1.094 yd and 1 mi = 1760 yd
[tex]\Rightarrow 1609\ m = 1\ mi[/tex]
Converting 7.67 m/s to miles/hour:
[tex]\dfrac{7.67 \times 3600}{1609}=17.16\ mi/h[/tex]
Two oxide of sulphur,A and B were analyzed and the results obtained showed that in oxide A,3.50g of sulphur combined with 6.00g of oxygen and in oxide B,2.80g of sulphur combined with 9.55g.Show that this result illustrate the law of multiple proportion
Answer:
See Explanaton
Explanation:
The law of multiple proportions states that when two same elements form more than a compound, the different masses of one element that combine with the same mass of the other element are in the ratio of small whole numbers.
Oxide A
3.50g of sulphur combined with 6.00g of oxygen
Oxygen:Sulphur = 6 : 3.5
Oxide B
2.80g of sulphur combined with 9.55g
Oxygen : Sulphur = 9.55 : 2.8
Therefore:
The ratio of Oxygen to Sulphur in Oxides A and B is:
[tex]\dfrac{\text{Oxygen}}{\text{Sulphur}} \implies \dfrac{6}{3.5}:\dfrac{9.55}{2.8} = \dfrac{1.7}{1}:\dfrac{3.4}{1}=1:2[/tex]
Ratio of Oxygen=1:2
There is exactly twice in Oxide B as in Oxide A.
This result illustrates the law of multiple proportions.
which of the following us not a property of salt in the ionic and covalent properties lab
Explanation:
I think Low melting point
because NaCl (salt has mp 801 degC)
Water has mp 0 degC
Polarity of water. Which is the correct answer?
For each of the compounds, find the length of the longest carbon chain in the box provided.
CH,
CH3 -CH2-CH2-CH2-CH-CH2-CH2 - CH2 - CH3
CH,CH,CH,
HC
CH-CH2-CH3
CH,CH.CHCCH,CH,CH,
1
CH2
H.C CH.CH
CH3
<
Answer:
In First compound the longest chain contains 7 C atoms.
In the Second compound the longest chain contains 9 C atoms.
In the Third compound the longest chin contains 7C atoms.
Explanation:
In first compound the longest chain contains 7 carbon atoms.In the second compound the longest chain contains 9 carbon atoms.In the third compound the longest chin contains 7 carbon atoms.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ2
Fredo’s spaceship takes him to the very edge of known space. There, gravity has no effect at all. Fredo takes a baseball and tosses it into space. What will most likely happen to the ball? It will not move at all. It will return to Fredo’s spaceship. It will eventually stop moving. It will continue moving in a straight line.
Answer:
D. It will continue moving in a straight line.
Explanation:
When Fredo takes a ball and tosses it into space, the ball will move upward infinitely.
Gravity is the downward force that acts on an object.
Without gravity, or without the effect of gravity, an object will continue to move in its path with the original direction applied to it.
Answer:
D
Explanation:
I took the test
An aqueous solution of glucose (MM = 180.2 g/mol) has a molality of 2.27 m and a density of 1.20 g/mL. What is the molarity of glucose in the solution?
**Any help would be greatly appreciated!**
Answer:
Molarity of the glucose solution = 2.72 mol/L
Explanation:
Molality of a solution is defined as the number of moles of solute per kilogram of solvent.
Therefore , a 2.27 molal solution of glucose contains 2.27 moles of glucose in 1 Kg of solvent
Density of solution = 1.20 g/mL
The volume occupied by 1 Kg or 1000 g solution = mass/density
Volume of 1000 g solution = 1000 g/1.20 g/ml = 833.3 mL
Number of moles of glucose present in the solution = 2.27 moles
Molarity = number of moles / volume(L)
volume of solution in litres = 883.3/1000 = 0.8333 L
Molarity = 2.27 moles /0.8333 l = 2.72 mol/L
Therefore, molarity of the glucose solution = 2.72 mol/L
The molarity of the glucose in the solution has been 2.72 mol/L.
Molality can be defined as the moles of the solute per kg of solvent.
The molality of glucose solution = 2.27 m
2.27 moles of glucose in 1000 grams of water.
Density has been the mass per unit volume. The density can be expressed as:
Density = [tex]\rm \dfrac{Mass}{Volume}[/tex]
The density of the given glucose solution = 1.20 g/ml
The volume of 1000 grams of water has been:
Volume = [tex]\rm \dfrac{Mass}{Density}[/tex]
Volume of 1000 grams water = [tex]\rm \dfrac{1000\;g}{1.20\;g/ml}[/tex]
Volume of 1000 g water = 833.3 ml
The molarity can be defined as the mass of solute per liter of the solution.
Molarity = [tex]\rm moles\;\times\;\dfrac{1000}{Volume\;(ml)}[/tex] ......(i)
The moles of glucose in the 833.3 ml solution have been 2.27 mol.
Substituting the values in equation (i):
Molarity = 2.27 mol [tex]\rm \times\;\dfrac{1000}{833.3\;ml}[/tex]
Molarity = 2.72 mol/L.
The molarity of the glucose in the solution has been 2.72 mol/L.
For more information about the molarity of the solution, refer to the link:
https://brainly.com/question/14707974
What is chemical potential energy?
Answer:
Chemical potential energy is the energy stored in the chemical bonds of a substance.
Explanation:
A student weighs out a 6.64 g sample of , transfers it to a 500. mL volumetric flask, adds enough water to dissolve it and then adds water to the 500. mL tick mark. What is the molarity of cobalt(II) fluoride in the resulting solution
Answer:
the molarity of cobalt(II) fluoride in the resulting solution is = 0.137 M
Explanation:
Given that :
a student dissolves 6.64 g of CoF₂ into 500 mL of water
volume of the solution(water) = 500 mL = 0.50 L
The standard molar mass of CoF₂ is 96.93 g/mol
number of moles of CoF₂ = mass of CoF₂/molar mass of CoF₂
number of moles of CoF₂ = 6.64 g/96.93 g/mol
number of moles of CoF₂ = 0.0685 mol
The molarity of any given substance is known to be as the number of moles of solute dissolved in one litre of solution.
Thus ;
Molarity of cobalt(II) fluoride CoF₂ in the resulting solution is = number of moles / Volume in (L)
Molarity of cobalt(II) fluoride CoF₂ = 0.0685 mol/ 0.50 L
= 0.137 M
Thus ; the molarity of cobalt(II) fluoride in the resulting solution is = 0.137 M
heterogeneous non example
Heterogeneous 'mixtures' (because they don't meet the definition of mixtures) are mixtures substances that aren't completely uniformly spread out. They haven't reacted with the solvent to become a solution.
Explanation: There are 2 types of heterogeneous solutions, A Colloid and a suspension.
Colloid: You can check if a mixture is heterogeneous by passing a light ray through it. This may cause the Tyndall effect (If the mixture is a colloid) when the Colloidal Heterogeneous mixture's particles are so small that they refract the beam of light and the path of light will be visible, like if you add 3 drops of milk in a glass of Water and shine a laser light through it. This is because the particles are too small to be seen by the unaided eye but big enough to scatter you laser light. However that particles won't settle down or will be separated by a filter paper due to particles' small size.
Suspension: A solution will be a solution when the particles of the Mixture is big enough to be seen by the unaided eye. Like if you mix sand and Water, the sand will eventually settle down due to Gravity. The mixture's solute will be big enough to pass through a filter paper.
Which example is a long-term environmental change? La Niña El Niño climate change small asteroid impact
The correct answer is C. Climate change
Explanation:
Long-term environmental changes occur as major events affect the environment and ecosystems indefinitely. These events differ from short-term environmental changes because the effect of short-term environmental changes is mainly temporary. Also, long-term changes are usually gradual.
Climate change is an example of long-term environmental changes because this implies indefinite and major changes in weather patterns and ecosystems. For example, it is believed climate change will decrease the amount of ice in Earth, change sea level, and lead to the extinction of dozens of species. This does not occur with events such as el niño or a small asteroid impact that affect the environment for a short time and do not imply major changes.
Answer:
it is c) climate change
Explanation:
i just took the quiz
hope this helps!!! :D
how many moles of O2 react with .75 moles of c10h22
Answer:
2 moles
Explanation:
Phloem contains specialized cells that move sugars and other nutrients both
up and down in plants. Which object is the best model of one of these cells?
A. Water balloon
Answer:Drinking straw
Explanation: my quiz said so
The object that represents the best model of one of the phloem cells is the drinking straw.
What is Phloem?Phloem may be defined as a type of vascular tissue in plants that significantly conducts the passage of sugars and other metabolic products from the leaves to the roots. This mediates the migration of sugar which is synthesized in the leaves during photosynthesis.
Apart from this, the phloem also regulates the movement of nutrients from the roots to the upper part of the body. This function of phloem cells shares homology with the object known as a drinking straw that mediates the transport of any fluid in both directions.
Therefore, a drinking straw is an object that represents the best model of one of the phloem cells.
To learn more about Phloem cells, refer to the link:
https://brainly.com/question/3138900
#SPJ2
Your question seems incomplete. The most probable complete question is as follows:
Can openerWater balloonDrinking StrawKitchen strainerwhat is the molar mass of magnesium tartrate
Answer:
172.385 g/mol
Explanation:
Magnesium Tartrate is C4H4MgO6
C - 12.01 g/mol
H - 1.01 g/mol
Mg - 24.305 g/mol
O - 16.00 g/mol
12.01(4) + 1.01(4) + 24.305 + 16(6) = 172.385 g/mol
Answer:
172.38
Explanation:
[tex]C_4H_4MgO_6\\C=12.01\\H=1.01\\Mg=24.30\\O=16.00\\\\4(12.01)+4(1.01)+24.30+6(16.00)\\48.04+4.04+24.30+96\\=172.38[/tex]
C = 12.01
H=1.01
Mg=24.30
O =16.00
4(12.01)+4(1.01)+24.30+6(16.00)
48.04 +4.04+24.30+96
=172.38
Which is a negative effect of deforestation on the environment? habitat restoration, desertification, soil production, or urbanization
Answer:
The correct option is desertification
Explanation:
Deforestation is the deliberate act of pulling down trees to provide a clear land for space or to make use of the trees for other purposes such as grazing, farming, timber fire wood, building and constructions, urban utilization, access roads, expansion, development of infrastructures, grazing of cattle and mining
The effects of deforestation includes climate change, flooding, increase in the proportion of green house gases in the atmosphere, soil erosion and desertification.
A negative effect of deforestation is desertification.
Deforestation refers to the cutting down of trees. There are many reasons why people may cut down trees. One of the popular reasons why people cut down trees is to obtain timber which is used for construction and as fuel.
An important consequence of the felling of trees also called deforestation is that a once fertile land may gradually be turned into a desert area. This is known as desertification.
Learn more: https://brainly.com/question/8330332
What molecule can form hydrogen bonds with others like it A. CF4 B. HCL C. CO2 D. NH3
Answer:
D. NH3
Explanation:
Hydrogen bonding exists only between hydrogen atoms, and is one of the strongest intramolecular forces. So you eliminate your choices down to B and D. HCl can't form Hydrogen bonding because of electron density and electronegativity but NH3 can, so your answer would be D.
Why does carbon form covalent bonds?
Answer:
Carbon has 4 electrons in its outermost shell. ... Therefore, carbon completes its octet by sharing its 4 electrons with other carbon atoms or with atoms of other elements and forms covalent bond. It forms strong covalent bonds because of its small size.
Explanation:
En la electrólisis del Cloruro de plomo se han depositado 2.6 gramos del metal en 20 minutos el peso atómico del plomo es 206 calculo la intensidad de la corriente eléctrica empleada AYUDENNNNN PLISSSS es para hoy!!!!!
Answer:
2.01 A
Explanation:
Para esta pregunta debemos empezar por la semi-reaccion del plomo:
[tex]Pb^+^2~_(_a_q_)~+~2e^-~->~Pb_(_s_)[/tex]
Se intercambian dos electrones en la semi-reacción del plomo. Si tenemos en cuenta la ecuación:
[tex]n=\frac{I*t}{z*F}[/tex]
Donde:
n= Moles depositados
I= Intensidad de corriente (en Amperios)
z= Numero de electrones intercambiados
F= Constante de faraday = 96484 C/mol
t=tiempo (en segundos)
Que conocemos de esta ecuación?
Los moles (se pueden calcular a partir de la masa atómica del plomo, 207.2 g/mol)
[tex]2.6~g~Pb\frac{1~mol~Pb}{207.2~g~Pb}=0.0125~mol~Pb[/tex]
El tiempo (hay que convertirlo a segundos):
[tex]20~min\frac{60~s}{1~min}=1200~s[/tex]
Z (Numero de electrones)
De acuerdo a la semi-reacción son intercambiados 2 electrones.
Por lo tanto podemos resolver para "I":
[tex]I=\frac{n*z*F}{t}=\frac{0.0125~mol*2*96484\frac{C}{mol}}{1200~s}[/tex]
[tex]I~=~2.01~\frac{C}{s}=2.01~A[/tex]
Espero que sea de ayuda!
Identify the correct statement regarding the strength of chemical bonds.
Weak bonds require more surface area to form than strong bonds.
A weak bond forms from a smaller change in energy compared to a strong bond.
Strong bonds occur with high temperature and weak bonds with low temperature.
Weak bonds require more heat to form than strong bonds.
Answer:
B.
Explanation:
A weak bond forms from a smaller change in energy compared to a strong bond.
The image is of the formation of a fault-block mountain.
Which of these most likely occurs to result in the
formation of these mountains?
O The crust is compressed
O The crust does not spread apart
The center block is forced upward.
The hanging walls from the two parallel faults slip down
Answer:
d.
Explanation:
The Formation of these mountains will be caused by
The crust does not spread apartThe center block is forced upward.The hanging walls from the two parallel faults slip downOptions B, C, and D is correct.
What are mountains?Generally, a mountain is simply defined as a body that rises dramatically above its surroundings and is distinguished by steep slopes.
In conclusion, Mountains are formed from the formation of rocks over years in an Environment.
Read more about Environment
https://brainly.com/question/17413226
#SPJ2
Which is one way that analyzing ice benefits scientists who study ancient climates? Scientists can analyze frozen volcanic dust to help predict eruptions. Scientists can drill deep into the ice to collect ice cores. Scientists can use pollen grains in ice to make inferences about the climate area. Scientists can study tree rings in ice to learn more about past climates.
Answer:
The correct option is;
Scientists can drill deep into the ice to collect ice cores which contain trapped atmospheric gases
Explanation:
The study of past climates also known as paleoclimatology, is accomplished by acquiring information from proxy data sources which are physical environment characteristics that are preserved through time to remake the conditions of past climate
Past physical environmental characteristics, from which information about ancient climate can be gained are stored in nature's climate variability records including, ice cores, rings in tree stems, fossil pollen, sediments found in the waters of the ocean
The proxy sources provide a means of understanding the conditions of ancient climate before advent of climate measurement.
Therefore, one way that analyzing ice benefits scientists who study ancient climates is that scientists can drill deep into the ice to collect ice cores which contain trapped atmospheric gases from past climates.
Answer: B: Scientists can study the layers of ice cores to gather information about past atmospheric composition.
Explanation: Got it right on a test!
How many moles of silver are equivalent to 2.408 x 10^24 atoms
The mole is used to measure small particles like atoms and molecules. The 4 moles of silver is equivalent to [tex]\bold{2.408 x 10^2^4 }[/tex] atoms.
Given here,
The number of atoms
[tex]\bold{2.408 x 10^2^4 }[/tex]
Number of moles = ?
1 mol of substance = [tex]\bold{ 6.02 x10^2^3}[/tex]
Hence,
moles of silver,
[tex]\bold {= \dfrac {2.408 x 10^2^4 } { 6.02 x10^2^3} }}\\\\\bold {= 4 mol}[/tex]
Therefore, the 4 moles of silver is equivalent to [tex]\bold{2.408 x 10^2^4 }[/tex] atoms.
To know more about mole concept, refer to the link:
https://brainly.com/question/20483253
Which statement correctly describes a feature of the rock cycle?
PA
Rocks are preserved through the process.
Rocks change from one type to another.
Different rock groups are not related to one another.
Rocks change from one type to another in a specific order.
Answer:
It’s D
Explanation:
Answer:
D Rocks change from one type to another in a specific order.
Explanation:
why am i blonde.............
Answer:
because your parents carry the recessice gene or they are blond
Explanation:
it could also be ffrom a mutation or just because you dyed your hair
1 Cup of Boiling Water
WAPHS Swimming Pool
(100 °C)
or
(25 °C)
• What is the difference between thermal energy and
temperature?
aterials
Enosh
Odates
ades
stery
endance
mbers
• The boiling water has a much higher temperature... What
does that mean?
nferences
enuity Ele
enuity se
sela
• Which has more thermal energy? Why?
Note Cla
Learnir
9
1 Mop
Answer:
Side photo
A small still is separating propane and butane at 135 °C, and initially contains 10 kg moles of a mixture whose composition is x = 0.3 (x = mole fraction butane). Additional mixture (x = 0.3) is fed at the rate of 5 kg mole/hr. The total volume of the liquid in the still is constant, and the concentration of the vapor from the still (xp) is related to x, as follows: Xp = How long will it take for X, to change from 0.3 to 0.35.
Answer: A swimming pool at 40°C is at a lower temperature than a cup of tea at 90°C. However, the swimming pool contains a lot more water. Therefore, the pool has more thermal energy than the cup of tea even though the tea is hotter than the water in the pool.
Explanation: Heat and Temperature do not mean the same thing. ... A swimming pool at 40°C is at a lower temperature than a cup of tea at 90°C. However, the swimming pool contains a lot more water. Therefore, the pool has more thermal energy than the cup of tea even though the tea is hotter than the water in the pool.