Answer:
B. physical property is the answer
Which of the following compounds are held together by ionic bonds? Select all that apply.
O A. CaCl2
OB. CH4
OC. Naci
D. sodium bromide
E. carbon dioxide
F. FeBr3
Answer:
Explanation:
All of above except carbon dioxide
The compound that is held together by ionic bonds are CaCl₂, NaCl, sodium bromide, and FeBr₃. The correct options are A, C, D, and F.
What are ionic bonds?Ionic bonds are electrovalent bonds. These bonds are formed when two or more atoms lose electrons or gain electrons to form an ion. Ions are opposite charges that attract each other. Ionic bonds are formed in both metals and non-metals.
CaCl₂, calcium chloride, is formed between metals and non-metals. Some more examples are NaOH – Sodium Hydroxide, NaHCO₃—Sodium Hydrogen Carbonate, etc.
An example is NaCl, is sodium has 11 atomic numbers. Chloride has 6 electrons in its outermost shell. They will share electrons with each other to make the noble gas configuration.
Thus, the correct options are A. CaCl₂, C. NaCl, D, sodium bromide, and F. FeBr₃.
To learn more about ionic bonds, refer to the link:
https://brainly.com/question/977324
#SPJ2
What is a number at the bottom right of an element in a chemical equation called?
Answer:an element in a chemical equation is called a subscript.
Explanation:
it represents the the number of atoms of that element present in the compound. hope this helps have a great day yall
The number at the bottom right of an element in a chemical equation is called a subscript.
Subscripts represent the number of atoms of that particular element in a molecule or formula unit. They indicate the ratio of atoms or ions present in a compound. Subscripts are written in a smaller font size and appear slightly below the element's symbol.
For example:
In the chemical compound water [tex](H_2O)[/tex],the subscript '2' indicates that there are two atoms of hydrogen (H) bonded to one atom of oxygen (O). The subscript specifies the ratio of elements in the compound, indicating that there are two hydrogen atoms for every one oxygen atom in water.
Therefore, the term subscript refers to the number on the right of an element in a chemical equation.
learn more about Subscripts here:
https://brainly.com/question/31749666
#SPJ6
a hypothesis is tested by ___.
a. proposing a theory
b. conducting an experiment
c. making further observations
d. talking with other scientists
Answer:
A.
Explanation:
because a theory is like a prediction and a prediction is like a hypothesis.
PLEASE HELP
How should this combustion reaction be balanced?
C5H3 + 02 → CO2 + H20
A. C5Hg + 502 → 5C02 + H20
B. C5Hg + 702 → 5C02 + 4H20
O C. C5H3 + 3.502 → 5C02 + 8H20
D. C5Hg + 302 → CO2 + 4H20
Answer:
B
Explanation:
All elements on both sides of the equation have the same amount of moles
How to frick a chicken...
Answer:uhhhhh should I be concerned
Explanation:
Answer:
hmmm o_O Maybe you... shouldnt
what do liquid methane and liquid water have in common
Answer:
methane on the other hand is made of one carbon atom and 4 hydrogen atoms. like water, the bonds are covalent.
Liquid methane and Liquid water are both covalent compounds, thus, they both have covalent bonds in common.
What is methane?Methane is a covalent compound which exists as a gas at room temperature.
Methane is composed of four hydrogen atoms and a carbon atom linked together by covalent bonds.
What is water?Water is a covalent compound which exists as a liquid at room temperature.
Water is composed of two atoms of hydrogen and one atom of oxygen linked together by covalent bonds.
What do liquid methane and Liquid water have in common?Since both liquid water and liquid methane are covalent compounds, they both have covalent bonds in common.
Therefore, liquid methane and liquid water have covalent bonds in common.
Learn more about covalent bonds at: https://brainly.com/question/1853488
The Rock Cycle moves in a specific order. True or
False
Answer:
it is false
Explanation:
it goes in different ways not in order
PLEASE HELP ME! THANK YOU IF YOU DO!!! ^^
Answer:
oceanic formation is the right answer.
Explanation:
this os becoz they slide a past each other and do not rub against each other
explain how liquid can enter the gas phase without reaching its boiling point
What would be the wavelength of light that has a frequency of 3 X
10-4 Hz in a vacuum?
Answer:
[tex]\lambda=10^{12}\ m[/tex]
Explanation:
Given that,
The frequency of the light, [tex]f=3\times 10^{-4}\ Hz[/tex]
We need to find the wavelength of the light.
The relation between frequency, wavelength and the speed of light is given by :
[tex]c=f\lambda\\\\\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{3\times 10^{-4}}\\\\\lambda=10^{12}\ m[/tex]
So, the wavelength of the light is [tex]10^{12}\ m[/tex].
The wavelength of light will be "[tex]10^{12} \ m[/tex]"
Given:
[tex]f = 3\times 10^{-4} \ Hz[/tex][tex]c = 3\times 10^8[/tex]By using the relation,
→ [tex]\lambda = \frac{c}{f}[/tex]
By putting the values, we get
→ [tex]= \frac{3\times 10^8}{3\times 10^{-4}}[/tex]
→ [tex]= 10^{12} \ m[/tex]
Thus the above response is right.
Learn more:
https://brainly.com/question/9860028
7. Consider an element with 2
electrons on the 1st shell and 4
electrons on the 2nd shell. What
element is likely to have that Bohr
model?
Answer:
Carbon (C)
Explanation:
The electron configuration of Carbon is 2-4.
How do you name ethers in chemistry?
Answer:
Common names of ethers simply give the names of the two alkyl groups bonded to oxygen and add the word ether. The current practice is to list the alkyl groups in alphabetical order (t-butyl methyl ether), but older names often list the alkyl groups in increasing order of size (methyl t-butyl ether).
Explanation:
Hope it is helpful.......
An astronomer observes an asteroid in the solar system. He notes that the asteroid is three times farther from the Sun than Earth is.
How far away from the Sun is the asteroid in astronomical units?
1 AU
2 AU
3 AU
4 AU
helpppppppp
Answer:
3 AU
Explanation:
The distance from the Earth to the Sun is known as 1 AU, or 1 Astronomical Unit. If an asteroid is three times this distance, it is 3 AU away.
A 5.41 g sample of carbon reacts with hydrogen to form 6.32 g of an organic compound. What is the empirical formula of the organic compound?
Answer:
CH₂
Explanation:
From the question given above, the following data were obtained:
Mass of Carbon (C) = 5.41 g
Mass of compound = 6.32 g
Empirical formula =?
Next, we shall determine the mass of Hydrogen (H) in the compound. This can be obtained as follow:
Mass of Carbon (C) = 5.41 g
Mass of compound = 6.32 g
Mass of Hydrogen (H) =?
Mass of H = mass of compound – mass of C
Mass of H = 6.32 – 5.41
Mass of H = 0.91 g
Finally, we shall determine the empirical formula of the compound. This can be obtained as follow:
Mass of C = 5.41 g
Mass of H = 0.91 g
Divide by their molar mass
C = 5.41 / 12 = 0.451
H = 0.91 / 1 = 0.91
Divide by the smallest
C = 0.451 / 0.451 = 1
H = 0.91 / 0.451 = 2
Thus, the empirical formula for the compound is CH₂
Please help, and if you could also give me a step by step that would be awesome!!
Answer:
4.4 g
Explanation:
Step 1: Write the balanced equation
Cu + 4 HNO₃ ⇒ Cu(NO₃)₂ + 2 NO₂ + 2 H₂O
Step 2: Calculate the moles corresponding to 3.2 L of NO₂ at STP
At standard temperature and pressure, 1 mole of NO₂ occupies 22.4 L.
3.2 L × 1 mol/22.4 L = 0.14 mol
Step 3: Calculate the moles of Cu needed to produce 0.14 moles of NO₂
The molar ratio of Cu to NO₂ is 1:2. The moles of Cu needed are 1/2 × 0.14 mol = 0.070 mol.
Step 4: Calculate the mass corresponding to 0.070 moles of Cu
The molar mass of Cu is 63.55 g/mol.
0.070 mol × 63.55 g/mol = 4.4 g
Given a sample of poly[ethylene-stat-(vinyl acetate)] A.Calculate the mean repeat unit molar mass for a sample of poly[ethylene-stat-(vinyl acetate)] that comprises 12.9 wt% vinyl acetate repeat units.B.Given that its number-average molar mass is 39,870 g/mol, calculate the number-average degree of polymerization of the copolymer.
Answer:
a) The mean repeat unit molar mass for PEVA is 30.72 g/mol
b) degree of polymerization of the copolymer is 1300
Explanation:
Given that;
the wt% of copolymer consist of 12.9 wt% of vinyl acetate and 87.1 wt% Ethylene.
Basis: 100 g of PEVA consist of 12.9 of vinyl acetate and 87.1g of Ethylene.
now we calculate the mole fraction of vinyl acetate Ethylene in the copolymer;
the molecular weights of vinyl acetate and ethylene are 86.09 g/mol and 28.05 g/mol respectively
so
moles of vinyl acetate = wt. of vinyl acetate / molecular weights of vinyl acetate
moles of vinyl acetate = 12.9 g / 86.09 g/mol
moles of vinyl acetate = 0.1498 mol
moles of Ethylene = wt. of Ethylene / molecular weights of Ethylene
moles of Ethylene = 87.1 g / 28.05 d/mol
moles of Ethylene = 3.1052 mol
Total moles = 0.1498 mol + 3.1052 mol = 3.255 mol
Next we calculate the mole percent;
mole percent of vinyl acetate [tex]X_{V}[/tex] = moles of vinyl acetate / total moles
[tex]X_{V}[/tex] = (0.1498 mol / 3.255 mol) × 100
[tex]X_{V}[/tex] = 4.6%
mole percent of Ethylene [tex]X_{E}[/tex] = moles of Ethylene / total moles
[tex]X_{E}[/tex] = (3.1052 mol / 3.255 mol) × 100
[tex]X_{E}[/tex] = 95.397% ≈ 95.4%
we know that, mean repeat unit molar mass for a sample = ∑[tex]X_{i}[/tex][tex]M_{i}[/tex]
where [tex]X_{i}[/tex] is the fraction ratio and [tex]M_{i}[/tex] is the molecular weight
so or the PEVA
mean repeat unit molar mass M = ( [tex]X_{V}[/tex][tex]M_{V}[/tex]) + ( [tex]X_{E}[/tex][tex]M_{E}[/tex])
so we substitute
M = ( 4.6% × 86.09) + ( 95.4% × 28.05 )
M = 3.96014 + 26.7597
M = 30.72 g/mol
Therefore, The mean repeat unit molar mass for PEVA is 30.72 g/mol
b)
Degree of polymerization
[tex]DP_{n}[/tex] = [tex]\frac{M_{n} }{M}[/tex]
where [tex]M_{n}[/tex] is the number average molecular weight ( 39,870 g/mol )
so we substitute
[tex]DP_{n}[/tex] = 39,870 g/mol / 30.72 g/mol
[tex]DP_{n}[/tex] = 1297.85 ≈ 1300 { 3 significance figure }
Therefore, degree of polymerization of the copolymer is 1300
I would like to get some examples of Newtons 1st,2nd, and 3rd Law
Answer:
Explanation:
Newtons 1st law:
If you slide a hockey puck on ice, eventually it will stop, because of friction on the ice. It might also stop if a hockey player places their stick in front of it.
Newton's 2nd law:
If the mass of an object is 20 kg and it's acceleration is 5 m/s, the force acting upon it is (m*a or 20*5) 100 N.
Another example that proves that force is dependent upon mass is that if you were to move a car and a truck (that were both previously stationary) at the same speed, the car would take less force/effort to move than the truck.
Newton's 3rd law:
If a book on a table, the table is exerting a force on it that is equal and opposite to the force of gravity.
If two soccer balls of the same mass collide, one moving and one stationary, then they would both apply an equal and opposite force onto each other, causing the moving ball to stop and the previously stationary ball to move at the speed of the previously moving ball.
HELP!!!! Which of the following substances is a major component in acid rain?
A) KOH
B) NH3
C) SO2
D) NaOH
Answer:
(C) SO2.
SO2 is known as sulfur dioxide.
The below information about acid rain and SO2’s involvement is from epa.gov:
“Acid rain results when sulfur dioxide (SO2) and nitrogen oxides (NOX) are emitted into the atmosphere and transported by wind and air currents. The SO2 and NOX react with water, oxygen and other chemicals to form sulfuric and nitric acids. These then mix with water and other materials before falling to the ground.”
Explanation:
How did Dmitri Mendeleev arrange the periodic law?
a. Each set of elements was arranged in special columns based on their mass.
b. Each set of elements was arranged in special columns based on their diameter.
c. Each set of elements was arranged in special periods based on their qualities.
d. Each set of elements was arranged in alphabetical order.
Answer:
a. Each set of elements was arranged in special coloumns based on their mass.
What is the normal pH range of a Base?
Answer:
7.35 - 7.45
Explanation:
The pH scale ranges from 0 (strongly acidic) to 14 (strongly basic or alkaline). A pH of 7.0, in the middle of this scale, is neutral. Blood is normally slightly basic, with a normal pH range of about 7.35 to 7.45. Usually, the body maintains the pH of blood close to 7.40.
Hope this helps
Answer:
The normal pH range if a base is more than 7
Explanation:
Basideally the pH range goes from 0-14 in which
Acidic range is :0-7
Neutral :7
Base : 7 - 14
A sample of metal has a mass of 16.12 g, and a volume of 4.87 mL. What is the density of this metal?
Answer:
3.31 g/cm³
Explanation:
1000cm³ = 1L
4.87mL = 4.87 × 10^-3 × 1000 = 4.87 cm³
density = mass/volume = 16.12/4.87 = 3.31 g/cm³
Help me with this one please!
Answer:
sorry i dont know
Explanation:
PLEASE HELP! Will mark Brainly if correct!
Answer:
6.591
explanation
mass of weight is 1.092 , and mass of weight boat and sample = 7.683
mass of the solid sample= (mass of weight boat and sample) - (weight of the boat) = (1.092-7683) = 6.591 g
hence, the mass of the solid sample is 6.591 g
why it is necessary to rinse the pipette after washing with water
Answer:Because When you're cleaning your glassware, you use water to rinse it off. If the burette is not completely dry by the time you use it, the remaining traces of water on the inside will make your titrant more dilute and thereby change its concentration.Before a burette is used, it needs to be cleaned. During the cleaning process, usually, water is introduced into the burette. Be the water clean or not, if the burette is then used without rinsing it with the solution that it is going to be filled with, the result of that analytical exercise will not be precise and accurate. The reason is that water residue in the burette would dillute the solution when it's filled in the burette which would make it impossible to determine the exact concentration of the solution moved by the burette. By rinsing and re-rinsing the burette several times with the solution it is going to be filled with, residue water from the cleaning process would be successfully removed from the burette as are other leftover substances from the cleaning process.
hope this helps have a nice night ❤️❤️❤️
Explanation:
What is the equilibrium constant for the reaction
SO2(g) + NO2(9) = SO3(g) + NO(g)?
А. Keq: [S03)(S02]
[NO][NO2]
B. Keq: [SO2)(NO2]
[SO3)(NO]
C. Keq: [SO3)3(NO]
[SO2)2(NO2)2
D. Keq: [SO3)(NO]
[SO2]NO2]
Answer:
D. Keq: [SO3][NO] /[SO2]NO2]
Explanation:
Hello!
In this case, according to the process to set up equilibrium expressions for chemical reactions at equilibrium, we realize we need to write up the concentration of products on top and that of reactants on bottom; thus, for there chemical reaction herein specified, we obtain:
[tex]Keq=\frac{[SO_3][NO]}{[SO_2][NO_2]}[/tex]
Thereby, the answer is D. Keq: [SO3][NO] /[SO2]NO2].
Best regards!
Answer:
D
Explanation:
solve this .......,..,.,.,..,.,,.,.,.,.,.,.,.,.,..,.,.,.,.z.,.,.,.,..,.,.,.,.,,.,.,.,
Answer: Molecular formula of copper (II) bromide is [tex]CuBr_2[/tex]
Molecular formula of aluminium (III) nitrate is [tex]Al(NO_3)_3[/tex]
Molecular formula of calcium (II) phosphate is [tex]Ca_3(PO_4)_2[/tex]
Molecular formula of iron (III) sulphide is [tex]Fe_2S_3[/tex]
Molecular formula of mercury (II) chloride is [tex]HgCl_2[/tex]
Molecular formula of magnesium (II) acetate is [tex](CH_3COO)_2Mg[/tex]
Explanation:
The name of the ionic compounds is written by writing the name of the cation first followed by its oxidation state in round brackets and then the name of the anion is written without any suffix. Thus the cation is written first followed by the oxidation state and then the anion.
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral compound.
Molecular formula of copper (II) bromide is [tex]CuBr_2[/tex]
Molecular formula of aluminium (III) nitrate is [tex]Al(NO_3)_3[/tex]
Molecular formula of calcium (II) phosphate is [tex]Ca_3(PO_4)_2[/tex]
Molecular formula of iron (III) sulphide is [tex]Fe_2S_3[/tex]
Molecular formula of mercury (II) chloride is [tex]HgCl_2[/tex]
Molecular formula of magnesium (II) acetate is [tex](CH_3COO)_2Mg[/tex]
What is the number of nitrogen molecules that reacted with excess hydrogen to make 2x10^10 molecules of ammonia
According to stoichiometry and mole concept,1×10¹⁰ molecules reacted with excess hydrogen to make 2 x 10¹⁰ molecules of ammonia.
What is stoichiometry?Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.It is important while balancing chemical equations.
In the given example, as 1 molecule of nitrogen produces 2 molecules of ammonia
∴2 x 10¹⁰ molecules of ammonia will be produced when 2 x 10¹⁰×1/2=1×10¹⁰ molecules .
Thus, 1×10¹⁰ molecules reacted with excess hydrogen to make 2 x 10¹⁰ molecules of ammonia.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ6
Some advocates of anabolic steroid use report that testicular atrophy associated with use of trenbolone can be alleviated if users also inject themselves with human chorionic gonadotropin, a hormone similar in structure and function to LH and FSH. Please explain how this treatment might work.
Answer:
Human chorionic gonadotropin (HCG) injections are much safer to use with some mild side effects to treat issues of testicular atrophy. Human chorionic gonadotropin (HCG) injections would increase blood flow and enable the testes' produce testosterone, reduce the shrinkage of the testicles and it also aids in the production of sperm cells which has been initially impaired due to testicular atrophy.
Explanation:
Anabolic steroid is a drug that plays the role of testosterone.
Testicular atrophy is the shrinkage of the testicles caused by old age or infections. Once it occurs, it lowers the production of testosterone and sperm cells.
Trenbolone increases muscle building, aids lean fat deposition, reduces the production of testosterone, and could also lead to testicular atrophy.
there is no such thing as a universal solvent- explain? I’ll mark brainiest!!!
Answer:
A true universal solvent does not exist. Although water is considered to be a the "universal solvent" it only dissolves other polar molecules. It does not dissolve nonpolar molecules, including organic compounds such as fats and oils. It is only called so because it can dissolve many more than other liquids.
Is CaO binary or polyatomic?
Answer:
It is going to be binary
Explanation: