Steam reforming of methane ( ) produces "synthesis gas," a mixture of carbon monoxide gas and hydrogen gas, which is the starting point for many important industrial chemical syntheses. An industrial chemist studying this reaction fills a tank with of methane gas and of water vapor, and when the mixture has come to equilibrium measures the amount of carbon monoxide gas to be .Calculate the concentration equilibrium constant for the steam reforming of methane at the final temperature of the mixture. Round your answer to significant digits.

Answer:

[tex]Fe_2O_3+3CO\Rightarrow \:2Fe+3CO_2[/tex]

Explanation:

[tex]Fe_2O_3+CO\Rightarrow \:2Fe+CO_2\\\\Fe_2O_3+3CO\Rightarrow \:2Fe+3CO_2[/tex]

Best Regards!

Answer:

Explanation:

1 ) Cl₂ + ZnBr₂ = ZnCl₂ + Br₂

In this reaction , oxidation number of Cl decreases  from 0 to -1  so it is reduced  and oxidation number of Br increases from -1 to 0 so it is oxidised . Hence this reaction is oxidation - reduction reaction .

2 )

Pb( ClO₄)₂ + 2KI = PbI₂ + 2KClO₄

In this reaction oxidation number of none is changing so it is not an oxidation - reduction reaction.

3 )

CaCO₃ = CaO + CO₂

In this reaction also oxidation number of none is changing so it is not an oxidation - reduction reaction.

So only first reaction is oxidation - reduction reaction.

2nd option is correct.

Answer:

Volume of NaOH, aka V2 = 6.32 mL to 3 sig. fig.

A chemistry student weighs out 0.0941 g of hypochlorous acid (HClo) into a 250. ml. volumetric flask and dilutes to the mark with distilled water. He plans to titrate the acid with 0.2000 M NaOH solution. Calculate the volume of NaOH solution the student will need to add to reach the equivalence point. Round your answer to 3 significant digits mL.

Explanation:

1 mole HClO = 74.44g

0.0941g = [tex]\frac{0.0941}{74.44}[/tex] = 0.00126 moles

Concentration = no. of moles/volume in L

Hence, Concentration of HClO = 0.00126/ 0.250L

= 0.005M.

C1V1 =C2V2

0.005 × 250 mL = 0.2 × V2

Volume of NaOH, aka V2 = 6.32 mL to 3 sig. fig.

The sand that grained will be quickly chemically weathered away should be option b. ferromagnesian silicate minerals.

It should be considered as the Silicate minerals where cations of iron and the form of magnesium should be important for the chemical components. It is used for covering up the minerals. Also, calcite should be normal weather via the solution process so it required a lot of water that contains a high amount of carbonic acid.

Hence, the correct option is b.

Learn more about mineral here: https://brainly.com/question/20772787

Answer: Thus 234 kJ of energy are required to produce 1.00 kilogram of iron metal

Explanation:

To calculate the number of moles , we use the equation:

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]  

Putting values , we get:

[tex]\text{Moles of iron}=\frac{1000g}{56g/mol}=17.8moles[/tex]    (1.00kg=1000g)

The balanced chemical reaction is:

[tex]Fe_2O_3(s)+2CO(g)\rightarrow 2Fe(s)+3CO_2(g)[/tex]   [tex]\Delta H=+26.3kJ[/tex]

Given :

Energy released when 2 moles of [tex]Fe[/tex] is produced = 26.3 kJ

Thus Energy released when 17.8 moles of [tex]Fe[/tex] is produced =

= [tex]\frac{26.3kJ}{2}\times 17.8=234kJ[/tex]

Thus 234 kJ of energy are required to produce 1.00 kilogram of iron metal

Answer:

NaClO + CH₃COOH ----> HClO + CH3CO- + Na

Explanation:

This reaction occurs between the combination of a salt and an acid, that is, an oxide-reduction reaction

Answer:

Constant-volume molar heat capacity of argon is 12.47 J K ⁻¹mol⁻¹

Explanation:

Argon is a monoatomic gas that behaves as an ideal gas at 298K.

Using the first law of thermodinamics you can obtain:

Work, Q, for constant pressure molar heat capacity,CP:

CP = (5/2)R

For constant-volume molar heat capacity,CV:

CV = (3/2)R

That means:

2CP/5 = 2CV/3

3/5 = CV / CP

As CP of Argon is 20.79 J K ⁻¹mol⁻¹, CV will be:

3/5 = CV / CP

3/5 = CV / 20.79 J K ⁻¹mol⁻¹

12.47 J K ⁻¹mol⁻¹ = CV

Answer:

calcium chloride dihydrate

Answer:

  0.0480 M

Explanation:

The reaction is ...

  H₂SO₄ + 2NaOH ⇒ Na₂SO₄ +2H₂O

That is, 2 moles of NaOH react with each mole of H₂SO₄. Then the molarity of the H₂SO₄ is ...

  moles/liter = (0.186 M/2)(12.9 mL)/(25.0 mL) ≈ 0.0480 M

Answer:

pH ≅ 4.80

Explanation:

Given that:

the volume of HN₃ = 25 mL = 0.025 L

Molarity of HN₃ = 0.150 M

number of moles of HN₃ = 0.025 × 0.150

number of moles of HN₃ =  0.00375  mol

Molarity of NaOH = 0.150 M

the volume of NaOH = 13.3 mL = 0.0133

number of moles of NaOH = 0.0133× 0.150

number of moles of NaOH = 0.001995 mol

The chemical equation for the reaction of this process can be written as:

[tex]HN_3 + OH- ---> N^-_{3} + H_2O[/tex]

1 mole of hydrazoic acid react with 1 mole of hydroxide to give nitride ion and water

thus the new number of moles of HN₃ = 0.00375 - 0.001995 = 0.001755 mol

Total volume used in the reaction =  0.025 +  0.0133 = 0.0383  L

Concentration of [tex]HN_3[/tex] = [tex]\dfrac{0.001755}{0.0383}[/tex] = 0.0458 M

Concentration of [tex]N^{-}_3[/tex] = [tex]\dfrac{ 0.001995 }{0.0383}[/tex] = 0.0521 M

GIven that :

Ka = [tex]1.9 x 10^{-5}[/tex]

Thus; it's pKa = 4.72

[tex]pH =4.72 + log(\dfrac{ \ 0.0521}{0.0458})[/tex]

[tex]pH =4.72 + log(1.1376)[/tex]

[tex]pH =4.72 + 0.05598[/tex]

[tex]pH =4.77598[/tex]

pH ≅ 4.80

The pH of the solution 0.150 M hydrazoic acid after 13.3 mL of NaOH base is added is 4.80.

pH of the given solution will be used by using the following equation:

pH = pKa + log[conjugate base] / [weak acid]

Given chemical reaction will be represented as:

HN₃ + OH⁻ → N₃⁻ + H₂O

Moles will be calculated as:

n = M×V, where

M = molarity

V = volume

Moles of 0.150 M hydrazoic acid = (0.150M)(0.025L) = 0.00375  mol

Moles of 0.150 M NaOH = (0.0133)(0.150) = 0.001995 mol

From the above calculation it is clear that moles of hydrazoic acid is present in excess and it will be:

0.00375 - 0.001995 = 0.001755 mol

And 0.001995 mol of N₃⁻ is preduced by the reaction.

Total volume of the solution = 0.025 +  0.0133 = 0.0383  L

To calculate the pH after titration, first we have to calculate the concentration in terms of molarity of N₃⁻ and HN₃ as:

[N₃⁻] = 0.001995 mol / 0.0383  L = 0.0521 M

[HN₃] = 0.001755 mol / 0.0383  L = 0.0458 M

Ka for HN₃ = 1.9 × 10⁻⁵

pKa = -log( 1.9 × 10⁻⁵ ) = 4.72

On putting all these values on the above equation, we get

pH = 4.72 + log (0.0521) / (0.0458)

pH = 4.80

Hence, pH of the solution is 4.80.

To know more about pH, visit the below link:
https://brainly.com/question/10313314

Answer:

please look at the picture below.

Explanation:

Answer:

A.Electrolysis

Explanation:

A.Electrolysis

For example,  electrolysis of solution of NaCl in water gives H2 and O2.

Answer:

Thin Layer Chromatography (TLC) can be used to analyze chemical reactions. During this reaction monitoring, a typical TLC plate would have three spots: the reactant lane, the reaction mixture lane, and a "co-spot" where reaction product would be spotted directly on top of reactant.

The co-spot serves as a reference point and is vital for reactions where reactant and product have similar Rfs, and many other variations of eluent tracking.

To indicate completion of the reaction, the disappearance of a spot (usually the starting reactant) is observed.

Answer:

[tex]m_{solution}=470g[/tex]

Explanation:

Hello,

In this case, a solution is formed when a solute is completely dissolved in a solvent, thus, for this situation, the sugar is the solute and the water the solvent but in addition to them we find spices which are also considered in the total mass of the solution. In such a way, for computing the total mass we must add the mass of three constituents (115 g sugar, 350 g water and 5 g spices) as shown below:

[tex]m_{solution}=115g+350g+5g\\\\m_{solution}=470g[/tex]

Best regards.

Answer:

D. pollution

Explanation:

Increase in ocean temperature is one of the major consequence of global warming which directly leads to rise in sea level,  coral bleaching and ocean deoxygenation.

Warming ocean temperatures do not leads to pollution directly whereas pollution leads to warming ocean temperatures. So, in the case of pollution, the effect is opposite.

Hence, the correct option is D.

Answer:

a change in temperature would be observed(ΔH is -ve)

Explanation:

Hydrochloric acid react with sodium hydroxide to give salt(sodium chloride) and water

HCl(aq) + NaOH(aq) =====> NaCl(aq) + H2O(l)

There would be no notable change since sodium chloride dissolved in water but there would be a change in temperature.

Since neutralization is exothermic(heat is evolved), therefore ΔH is negative

Answer:

in crystalline solids

Hope this answers your question, good luck

The crystalline solids represent the best identification where the long-range order should be found.

Crystalline solids refer to the solid where the atoms, molecules should be make the arrangement. The smallest & repeated pattern of this solid should be called as the unit cell. The unit cell should be treated as the bricks in the wall which means it should be homogenous in the nature and repeated

Therefore, The crystalline solids represent the best identification where the long-range order should be found.

Learn more about solid here: https://brainly.com/question/17431076

Answer:

THE EMPIRICAL FORMULA FOR THE UNKNOWN COMPOUND IS C7H9O

Explanation:

The empirical formula for the unknown compound can be obtained by following the processes below:

1 . Write out the percentage composition of the individual elements in the compound

C = 75.68 %

H = 8.80 %

O = 15.52 %

2. Divide the percentage composition by the atomic masses of the elements

C = 75 .68 / 12 = 6.3066

H = 8.80 / 1 = 8.8000

O = 15.52 / 16 = 0.9700

3. Divide the individual results by the lowest values

C = 6.3066 / 0.9700 = 6.5016

H = 8.8000 / 0.9700 = 9.0722

O = 0.9700 / 0.9700 = 1

4. Round up the values to the whole number

C = 7

H = 9

O = 1

5 Write out the empirical formula for the compound

C7H90

In conclusion, the empirical formula for the unknown compound is therefore C7H9O

Answer:

3-Pentyn-1-ol

Explanation:

tripple bond is at 3 postion from alochol

carbon are 5 atoms so pent

yn becauese its alkyne

Answer:

n= 0.08186

{He}2s^2 2p^6

Explanation:

PV=nRT

n=PV/RT

n= (1.220 atm)(4.3410 L) / (0.0821 atm*L/mol*K)(788.0 K)

n=0.08186

As for the electron configuration:

Ne:

{He} 2s^2 2p^6

or long hang:

1s^2 2s^2 2p^6

[tex][Ne]=1s^22s^22p^{10}[/tex]

Given:

To find:

1.

The pressure of the gaseous boron trifluoride = P = 1.220 atm

The volume of the gas in bulb = V = 4.3410 L

The moles of the  gaseous boron trifluoride = n

The temperature of gaseous boron trifluoride = T = 788.0 K

Using an ideal gas equation:

[tex]PV = nRT\\\\1.220 atm\times 4.3410 L=n\times 0.0821 atm L/mol K\times 788.0 K\\\\n=\frac{1.220 atm\times 4.3410 L}{0.0821 atm L/mol K\times 788.0 K}\\\\n=0.08186 mol[/tex]

The moles of gaseous boron trifluoride is 0.08186 moles.

2.

The atomic number of neon atom = 10

The electronic configuration in the ground state is the most stable arrangement of the electrons in the lowest energy levels.

The ground state electronic configuration of neon is:

[tex][Ne]=1s^22s^22p^{10}[/tex]

Learn more about the ideal gas equation and electronic configuration here:

brainly.com/question/1056445?referrer=searchResults

brainly.com/question/5524513?referrer=searchResults

Explanation:

It is given that,

The electron in a hydrogen atom, originally in level n = 8, undergoes a transition to a lower level by emitting a photon of wavelength 3745 nm. It means that,

[tex]n_i=8[/tex]

[tex]\lambda=3745\ nm[/tex]

The amount of energy change during the transition is given by :

[tex]\Delta E=R_H[\dfrac{1}{n_f^2}-\dfrac{1}{n_i^2}][/tex]

And

[tex]\dfrac{hc}{\lambda}=R_H[\dfrac{1}{n_f^2}-\dfrac{1}{n_i^2}][/tex]

Plugging all the values we get :

[tex]\dfrac{6.63\times 10^{-34}\times 3\times 10^8}{3745\times 10^{-9}}=2.179\times 10^{-18}[\dfrac{1}{n_f^2}-\dfrac{1}{8^2}]\\\\\dfrac{5.31\times 10^{-20}}{2.179\times 10^{-18}}=[\dfrac{1}{n_f^2}-\dfrac{1}{8^2}]\\\\0.0243=[\dfrac{1}{n_f^2}-\dfrac{1}{64}]\\\\0.0243+\dfrac{1}{64}=\dfrac{1}{n_f^2}\\\\0.039925=\dfrac{1}{n_f^2}\\\\n_f^2=25\\\\n_f=5[/tex]

So, the final level of the electron is 5.

Answer:

To the left.

Explanation:

Step 1: Write the balanced reaction at equilibrium

2 SO₂(g) + O₂(g) ⇄ 2 SO₃(g)

Step 2: Calculate the reaction quotient (Qc)

Qc = [SO₃]² / [SO₂]² × [O₂]

Qc = 0.254² / 0.500² × 0.00855

Qc = 30.2

Step 3: Determine in which direction will proceed the system

Since Qc > Kc, the system will shift to the left to attain the equilibrium.

Answer:

[tex]T_2=453.05K[/tex]

Explanation:

Hello,

In this case, the temperature-variable Arrhenius equation is written as:

[tex]\frac{k(T_2)}{k(T_1)}=exp(\frac{Ea}{R}(\frac{1}{T_2}-\frac{1}{T_1} ))[/tex]

Now, for us to solve for the temperature by which the reaction rate constant is 0.0760M/s we proceed as shown below:

[tex]ln(\frac{k(T_2)}{k(T_1)})=\frac{Ea}{R}(\frac{1}{T_2}-\frac{1}{T_1} )\\ln(\frac{0.0760M/s}{0.00000291M/s} )=\frac{183000J/mol}{8.314J/(mol*K)} *(\frac{1}{T_2} -\frac{1}{573K} )\\\frac{1}{T_2} -\frac{1}{573K} =\frac{10.17}{22011.06K^{-1}} \\\\\frac{1}{T_2}=4.62x10^{-4}K^{-1}+\frac{1}{573K}\\\\\frac{1}{T_2}=2.21x10^{-3}K^{-1}\\\\T_2=453.05K[/tex]

Regards.

Answer:a

Explanation:

The three characteristics of minerals are that they are solid, have definite crystal structure and definite chemical composition.

Minerals are defined as a chemical compound  which has a well -defined composition and possesses a specific crystal structure.It occurs naturally in the pure form.

If a compound occurs naturally in different crystal structure then each structure is considered as a different mineral.The chemical composition of a mineral varies  depending on the presence of small impurities which are present in small quantities.

Some minerals  can have variable proportions of two or more chemical elements  which occupy equivalent position in the crystal structure.It may also have variable composition which is split into separate species.

Physical properties of minerals include color,streak, luster,specific gravity  and cleavage.

Learn more about minerals ,here:

https://brainly.com/question/1333886

#SPJ6

Answer:

H⁺(aq) + H₂O(l) ⇄ H₃O⁺(aq)

Explanation:

According to Brönsted-Lowry acid-base theory, an acid is a substance that donates H⁺. Let's consider the molecular equation showing that benzoic acid is a Brönsted-Lowry acid.

C₆H₅COOH(aq) + H₂O(l) ⇄ C₆H₅COO⁻(aq) + H₃O⁺(aq)

The complete ionic equation includes all the ions and molecular species.

C₆H₅COO⁻(aq) + H⁺(aq) + H₂O(l) ⇄ C₆H₅COO⁻(aq) + H₃O⁺(aq)

The net ionic equation includes only the ions that participate in the reaction and the molecular species.

H⁺(aq) + H₂O(l) ⇄ H₃O⁺(aq)

Answer:

CaF2 + CO3- ----> CaCO3 + 2 F-

Explanation:

The chemical compounds found on the left side of the date are the reagents and those found on the right are the products, where calcium carbonate appears.

Calcium carbonate is a quaternary salt