Answer:
a. KBr
b. CaO
c. MgCl₂
d. NaF
e. NH₃
Explanation:
a. 2K + Br₂ = 2KBr
b. 2Ca + O₂ = 2CaO
c. Mg + Cl₂ = MgCl₂
d. 2Na + F₂ = 2NaF
d. N₂ + 3H₂ = 2NH₃
what is the mass of 1.5 mol of aluminum?
Answer:
40.47 g Al
Explanation:
In 1 mol of Al, there are 26.98 grams of Al, so Al is 26.98 g/mol.
Simply multiply 1.5 by 26.98 to get your answer.
DUE IN 30 MINUTES!!! (please keep it short if you can, if not its ok.) What is the molar mass of Pb(SO4)2? Explain how you calculated this value. (4 points)
Answer:
399
Explanation:
Pb(SO4)2 contains 1 atom of Pb, 2 atoms of S and 8 atoms of O. So, atomic mass of Pb(SO4)2 is 207 + 64 + 128 = 399 u. Therefore, molar mass of Pb(SO4)2 is 399 g/mol.HOPE THIS helps. Good Luck
Answer:
The molar mass of Pb(SO₄)₂ is 399.32.
Explanation:
To find the molar mass of Pb(SO₄)₂, you have to find the molar mass of each individual element that makes up the compound.
Let's start by figuring out how many of each element is present in the compound.
Pb (lead) - 1
S (sulfur) - 2
O (oxygen) - 8
(SO₄)₂ is a polyatomic ion. It is written in parentheses followed by a subscript of 2. This means that there are two sulfate ions in the compound. So, the number of sulfur atoms and oxygen atoms doubles. (1 × 2 = 2) and (4 × 2 = 8).
Next, look up the molar mass of each element on a periodic table and multiply it by the number of atoms present.
Pb - 207. 2 × 1 = 207. 2
S - 32.06 × 2 = 64.12
O - 16.00 × 8 = 128
Lastly, add up them all together to get the molar mass.
207. 2 + 64.12 + 128 = 399.32
Jack tries to place magnets on his refrigerator at home, but they won’t stick. What could be the reason?
Answer:
The body of the refrigerator isn’t made of magnetic material.
Explanation:
Same reason why a magnet doesn't stick to a paper or a plastic is the reason behind why Jack's refrigerator is acting out because may be it isn't made of magnetic materials like iron, steel etc, but rather made up of non magnetic things like porcelain, wood etc.
The ____ cycle is not a nutrient cycle
Answer:
Water cycle
Explanation:
The water cycle, also called as the hydrologic cycle that describes the continual flow of water i.e on over and beyond the surface of the Earth.
The nutrient cycle refers to the cycle in which there is a movement and exchange of organic and inorganic matter
Therefore the water cycle is not a nutrient cycle and hence the same is to be considered
Answer:
water cycle
Explanation:
:)
Consider an electrochemical cell based on the spontaneous reaction 2AgCl(s) + Zn(s) → 2Ag(s) + 2Cl– + Zn2+. If the zinc ion concentration is kept constant at 1 M, and the chlorine ion concentration is decreased from 1 M to 0.001 M, the cell voltage should:
Answer:
there is an increase by 0.18 V in the cell voltage.
Explanation:
The given equation of the reaction can be well written as
[tex]2AgCl_{(s)} + Zn _{(s)} \to 2Ag_{(s)} + 2 Cl^- _{(aq)}+ Zn^{2+}_{(aq)}[/tex]
By application of Nernst Equation ; we have the expression
[tex]E_{cell} = E^0- \dfrac{0,059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
here in the above equation;
n = number of electrons transferred in the equation of the reaction
n = 2
Also;
[tex]E^0 = E_{cathode} - E_{anode}[/tex]
[tex]E^0 = E_{Ag^+/Ag} - E_{Zn^+/Zn}[/tex]
[tex]E^0 = +(0.80 \ V) - (-0..76 \ V)[/tex]
[tex]E^0 = (0.80 \ V +0..76 \ V)[/tex]
[tex]E^0 = 1.56 \ V[/tex]
If the zinc ion concentration is kept constant at 1 M; we have:
[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log (1)[/tex]
Since log(1) = 0
Therefore;
[tex]E_{cell} = 1.56\ V[/tex]
When the chlorine ion concentration is decreased from 1 M to 0.001 M; we have;
[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[1*0.001^2}]})[/tex]
[tex]E_{cell} = 1.56 - 0.0295 \ * \ log ({[1*10^{-6}}]})[/tex]
[tex]E_{cell} = + 1.737 \ V[/tex]
The change in voltage = [tex]E_{cell} - E^0[/tex]
=( 1.737 - 1.56 )V
= 0.177 V
≅ 0.18 V
Thus; from the following observation; there is an increase by 0.18 V in the cell voltage.
The voltage of the cell increased by 0.18 V.
The equation of the reaction is; 2AgCl(s) + Zn(s) → 2Ag(s) + 2Cl– + Zn2+
We know that;
E°cell = 1.36 - (-0.76) = 2.12 V
If the cells are both at 1M concentration the Ecell = E°cell = 2.12 V
When the concentration of Cl- decreased from 1 M to 0.001 M
Ecell = E°cell - 0.0592/n log Q
Substituting values;
Ecell = 2.12 V - 0.0592/2 log (1 × (0.001)^2)
Ecell = 2.298 V
Increase in voltage = 2.298 V - 2.12 V = 0.18 V
Learn more: https://brainly.com/question/165414
what is Lfusion in the equation Q=mLfusion
Answer:
[tex]L_{\text{fusion}[/tex] is latent heat of fusion.
Explanation:
Latent heat is basically termed as hidden heat. It is defined as the amount of heat required to change 1 g of a substance at the temperature of its melting point from the solid to the liquid state at constant temperature.The formula that relates heat and latent heat of fusion is given by :[tex]Q=mL_{\text{fusion}}[/tex]
Here,
m is mass of substance
[tex]L_{\text{fusion}[/tex] is latent heat of fusion.
Calculate the payback time if she insulates the loft with 300 mm insulation when: area of loft space = 100m^2 cost of roll of 100 mm thick loft insulation that covers 8.3m^2 = £20 cost of putting the insulation into the loft = £120 savings per year = £80 per 100 mm Payback Time = installation cost divided by annual savings
Answer: Payback time = 0.0075
Explanation: Since payback time is calculated as:
payback time = [tex]\frac{installation cost}{annual savings}[/tex]
First determine the installation cost:
100 mm thick insulation covers 8.3 m². Then 300 mm covers 24.9 m².
To cover 8.3m² costs £20. Then, the cost to cover 24.9 m² is:
cost = [tex]\frac{20*24.9}{8.3}[/tex]
cost = £60
The cost of putting the insulation is £120, so the total cost is:
total cost = £60 + £120
total cost = £180
Savings per year per 100 mm thick is £80. For 300 mm, the value of annual savings is:
savings = [tex]\frac{300*80}{100}[/tex]
savings = 240
payback time = [tex]\frac{installation cost}{annual savings}[/tex]
payback time = [tex]\frac{180}{240}[/tex]
payback time = 0.75
how many atoms are contained in 2.70g of aluminum provided that 32g of sulphur equals 6.02 × 10^(23)atoms
Answer:
[tex]1.63 \times {10}^{24} [/tex]
one atom of an element = 6.02 \times {10}^{23} atom
The mass of one atom of sulphur = 32g
The mass of one atom of aluminium = 27g
so one atom of aluminium = 6.02 \times {10}^{23}
27g of AL = 6.02 \times {10}^{23} atom
2.70g of AL = X atoms
Then you cross multiply ........
and get the answer
.
HELP! 10 points rewarded, plus, best answer gets BAINLIEST!!
Answer:
4.08 grams
Explanation:
Essentially, we're looking for the mass of HCl that "matches" 3.26 grams of magnesium hydroxide.
First, convert 3.26 grams of [tex]Mg(OH)_2[/tex] into moles by dividing by the molar mass. The molar mass of [tex]Mg(OH)_2[/tex] is 24.3 + 16 * 2 + 1 * 2 = 58.3 g/mol. So, 3.26 grams is equal to:
3.26 g ÷ 58.3 g/mol = 0.0559 mol [tex]Mg(OH)_2[/tex]
Notice that from the chemical equation, magnesium hydroxide and hydrochloric acid (HCl) have a ratio of 1 to 2. In other words, for every 0.0559 moles of [tex]Mg(OH)_2[/tex], there are 0.0559 * 2 = 0.112 moles of HCl.
Finally, convert moles of HCl to grams by multiplying 0.112 by the molar mass, which is 1 + 35.45 = 36.45 g/mol:
0.112 mol HCl * 36.45 g/mol = 4.08 g HCl
The answer is thus 4.08 grams.
~ an aesthetics lover
Which part of the electromagnetic spectrum is nearest to X-rays? microwaves infrared light gamma rays radio waves
Answer:
The correct answer to the following question will be Option A (Microwaves).
Explanation:
This tends to be a source of radiation, including some signals, infrared radiation, x-rays as well as gamma. This appears to have a diverse variety of uses, involving communications, radar, and scheduling, but best known by most individual people. Sections of society used handheld devices, including tablets, as well as WiFi.The other given choices are not related to the given circumstances. So that option A seems to be the appropriate one.
Answer:
its a
Explanation:
Which refers to the density of the medium’s particles at the compression of a sound wave? A.amplitude B.pitch C.volume D.wavelength
Answer:
A is the answer.
Explanation:
The sound wave is a longitudinal wave which travels in the form of compression and rarefaction . The point where the particles are closer to each other is called compression and the point where the particles are far apart from each other is called rarefaction.
Answer:
Amplitude
Explanation:
Amplitude describes the displacement of the medium's particles. The higher the amplitude, the more dense it is, and the lower the amplitude, the less dense it is.
Pitch is incorrect because it describes the sound
Volume is incorrect because it describes the sound.
Wavelength is incorrect because it describes the distance between a period of a wave.
1) In 1.31 g of a chloride of titanium, there is 0.528 g of titanium. What is the empirical formula of this titanium chloride?
Answer:
TiCl2
Explanation:
Mass of the chloride of titanium= 1.31 g
Mass of titanium= 0.528 g
Therefore mass of chlorine = 1.31-0.528 = 0.782 g
To determine the empirical formulae of the titanium chloride, divide the mass of each element by its relative atomic mass and divide through by the lowest ratio.
Ti- 0.528/48 = 0.011, Cl- 0.782/35.5 = 0.022
Ti- 0.011/0.011 , Cl- 0.022/0.011
Ti- 1, Cl-2
Hence the required empirical formula is TiCl2
A glass cup of orange juice is found to have pOH of 11.40. Calculate the concentration of the hydrogen ions in the juice.
Answer: The concentration of hydrogen ion is 2.5 x 10∧-3.
Explanation:
It is well known that; pH + pOH = 14
∴ pH + 11.40 = 14
pH = 14 -11.40 = 2.60
Remember that,
pH = - Log [ H+ ]
2.60 = - log [H+]
To get the hydrogen ion concentration, we take the anti-log of 2.60.
[H+] = Antilog 2.60 = 2.5 x 10∧-3.
sodium chloride is called an electrovalent compound where as carbon dioxide is called covalent compound why
Electrovalent compounds are those that are created when one or more electrons are transferred from one atom to another inside the compound. NaCl is an electrovalent substance because it shares an electron with other compounds to produce them.
What are compounds ?A material created by chemically joining two or more distinct components. Examples of compounds are table salt (NaCl), which is generated from the elements sodium and chloride, and water (H2O), which is created from the components hydrogen and oxygen.
One carbon atom and two oxygen atoms combine to form carbon dioxide. One carbon dioxide molecule contains four covalent connections. Because neither carbon nor oxygen are metals, we can infer that carbon dioxide is a covalent molecule.
Pure substances known as compounds are created chemically when two or more elements are combined in a specific mass proportion. Chlorine and sodium combine to form sodium chloride (common salt).
Thus, sodium chloride is called an electrovalent compound whereas carbon dioxide is called covalent compound.
To learn more about compound, follow the link;
https://brainly.com/question/14117795
#SPJ2
all electromagnetic radiation: A. can travel through empty space B. travels at the same speed in a vacuum C.consists of photons D. all of the above
Answer:
A. can travel through empty space
Explanation:
it is said dat electro magnetic waves or radiation travels through the vacuum of space
Answer:
all of the above. Because, Y'know, electromagnetic radiation is like that.
The initial temperature of a bomb calorimeter is 28.50°C. When a chemist carries out a reaction in this calorimeter, its temperature decreases to 27.45°C. If the calorimeter has a mass of 1.400 kg and a specific heat of 3.52 J/(gi°C), how much heat is absorbed by the reaction?
Answer:
D. 5,170 J
Explanation:
Which question would most likely be studied by a physicist?
A. Were there ever any living organisms on Mars?
B. How can the forces on a space probe be controlled so it will land
on Mars?
O C. What type of substances make up the soil on Mars?
O D. Should the government spend taxpayers' money to send space
probes to Mars?
Answer:A
Explanation: Were there any living organisms is the answer because physics is the study of matter,its motion and behaviour of space and time and some other topics like energy and force.
Answer:
B
Explanation:
Forces and vectors on a probe are a physics thing
When sugar is added to a sugar solution, the sugar does not dissolve. Which
term describes the original sugar solution?
O A. Semisaturated
O B. Supersaturated
C. Saturated
D. Unsaturated
Answer:Supersaturated
Explanation:The answer is supersaturated because supersaturation is a solution that contains more than the maximum amount of solute that is capable of being dissolved at a given temperature. It is supersaturated because there is already a sugar solution and adding another sugar is more than the maximum amount of solute.
sea water boiling below 100 degrees celsius true or false
Answer:
Explanation:
its true
hope this helps
plz mark as brainliest!!!!!
Answer:
True
Explanation:
c. Write a complete ionic equation for the reaction and identify the spectator ions.
The required complete ionic equation of the reaction
Pb(NO3)2+2KI---->PbI2+2KNO3 is Pb2+(aq) + 2 I−(aq) → PbI2(s)
What is ionic equation?A chemical equation in which the electrolytes in aqueous solution are expressed as dissociated ions.
Spectator ions in above equation are as follows- K +and NO3−
Define spectator ions.
Ions that are not involved in the actual chemical reaction are called spectator ions.
Net ionic equation of given reaction isPb⁺²+2I ⁻¹⟶PbI₂It shows only the ions which involves in the chemical reaction.
Therefore, K⁺ and NO3⁻ are spectator ions.
Learn more about spectator ions ,here:
https://brainly.com/question/22277121
#SPJ2
a heating fan is supplied with 150 j of electricity which is nonverts to 113 j of thermal energy and 37 j of sound energy
How efficient is the heating fan?
Answer:
Heating Fan is 75.33% efficient.
Explanation:
As it is mentioned that the given fan is a HEATING FAN, it means the it is used for provided heat (thermal energy) to the surrounding. Hence, its efficiency depends upon how much heat/thermal energy is provides.
We can state that.
Total Energy provided = 150 J
Useful Energy = 113 J
Wasted Energy = 37 J
The efficiency of the heating fan can be given by following formula:
Efficiency = ( Useful Energy / Total Energy ) × 100
Efficiency = ( 113 J / 150 J) × 100
Efficiency = (0.7533)× 100
Efficiency = 75.33%
Electrical potential is the amount of energy that is available to do what?
A.
attract atoms to each other
B.
move atoms from one half cell to another half cell
C.
move electrons from anode to cathode
D.
move electrons from cathode to anode
C.
move electrons from anode to cathode
Step-by-step Explanation
Electrical potential is the amount of energy that is available to move electrons from anode to cathode
Answer:
move electrons from anode to cathode
Explanation:
Plato
What is equilibrium?? Give examples
Answer:
it is when a state in which opposing forces or influences are balanced.
A example of equilibrium is in economics supply and demand are equal.
Explanation:
Answer:
Compromise of 1850
Explanation:
A sample of gas is found to occupy a volume of 900cm^3 at 27 degree Celsius, calculate the temperature at which it will occupy a volume of 300cm^3, provided the pressure is kept constant.
Answer:
Explanation:
Here, V1=900cm3, V2=300cm3
T1=(27+273)K=300K, T2=?
Applying Charles's law,
V1T1=V2T2
∴T2=V2T1V1=300cm3×300K900cm3=100K
=100−273=−173∘C
Hope this helps
plz mark as brainliest!!!!!!
After 273 m3 of ethylene oxide at 748 kPa and 525 K is cooled to 293 K, it is allowed to expand to 1100. m3. The new pressure is _____kPa
Answer:
[tex]\large \boxed{\text{104 kPa}}[/tex]
Explanation:
To solve this problem, we can use the Combined Gas Laws:
[tex]\dfrac{p_{1}V_{1} }{n_{1}T_{1}} = \dfrac{p_{2}V_{2} }{n_{2}T_{2}}[/tex]
Data:
p₁ = 748 kPa; V₁ = 273 m³; n₁ = n₁; T₁ = 525 K
p₂ = ?; V₂ = 1100. m³; n₂ = n₁; T₂ = 293 K
Calculations:
[tex]\begin{array}{rcl}\dfrac{p_{1}V_{1}}{n_{1} T_{1}} & = & \dfrac{p_{2}V_{2}}{n_{2} T_{2}}\\\\\dfrac{\text{748 kPa}\times \text{273 m}^{3}}{n _{1}\times \text{525 K}} & = &\dfrac{p_{2}\times \text{1100. m}^{3}}{n _{1}\times \text{293 K}}\\\\\text{390.0 kPa} & = &3.754{p_{2}}\\p_{2} & = & \dfrac{\text{390.0 kPa}}{3.754}\\\\ & = & \textbf{104 kPa} \\\end{array}\\\text{The new pressure is $\large \boxed{\textbf{104 kPa}}$}[/tex]
Which of the following is the best definition of a physical change?
A. Something that can be observed or measured while changing the identity of the substance.
B. A nail rusting.
C. A change that occurs without changing the identity of the substance.
D. Ice melting into water.
Answer:
the answer is D.ice melting into water
Which consists of only one type of atom?
Answer:
A chemical element
Explanation:
A chemical element consists of only one type of atom.
What mass of nickel (Ni) is in a 2.4 Kg sample of propanol if the concentration is 20 ppb ? (atomic mass of Ni = 58.69)
Answer:
The mass of nickel is 48μg
Explanation:
Parts per billion is a way to describe small concentrations and is defined as the ratio between μg of solute and kg of solvent.
If a solution of nickel in propanol is 20ppb, contains 20μg of nickel in 1 kg of propanol.
Thus, a sample of 2.4kg of propanol will contain:
2.4kg × (20μg nickel / 1kg) = 48μg nickel
The mass of nickel is 48μgWhat biological sample do home pregnancy tests use to detect pregnancy?
Answer:
The biological sample that pregnancy tests use to detect pregnancy is urine
Answer:
yes
Explanation:
the urine in the the tester will find hormones to determine if pregnant or not
mass is 89.6 grams (g), and its volume is 10 cubic centimeters (cm3). What’s the density of the sample?
Explanation:
density = mass/volume
density = 89.6/10
density = 8.96g/cm³