Read this description of the life cycle of a mushroom. 1. A mushroom begins to grow underground as a single-celled "spore.” 2. The spore grows into multicellular structures called "hyphae.” 3. The hyphae absorb nutrition and detect when conditions are right to sprout a mushroom above ground. 4. The sprouted mushroom then forms new spores that can enter the ground and begin the life cycle again. Which sentence about this life cycle shows that mushrooms need energy and respond to stimuli? A: A mushroom begins to grow underground as a single-celled “spore.” B: The spore grows into multicellular structures called “hyphae.” C: The hyphae absorb nutrition and detect when conditions are right to sprout a mushroom above ground. D: The sprouted mushroom then forms new spores that can enter the ground and begin the life cycle again

The one compound among the given options that is least soluble in water is;

Option B; CH₃CH₂CH₂F

       We know in chemistry that hydrogen bonding affects solubility in that the presence of hydrogen bonding between the molecules of a substance show us that such molecules are polar. This therefore means that the molecules will be soluble in a polar solvent such as water.

      Looking at the options, all of them form hydrogen bonds except for Option B which has Fluorine (F) alone not directly bonded to hydrogen. Instead the fluorine will be bonded to a carbon atom which means it is not going to be easily soluble in water.

     In conclusion, the one compound that would be the least soluble in water is CH3CH2CH2F.

Read more at; https://brainly.in/question/1201868

The compound that is the least soluble in water is CH₃CH₂COOH, which is also known as ethanoic acid or acetic acid. Therefore, option D is correct.

Ethanoic acid is a weak acid that partially ionizes in water, releasing hydrogen ions (H+) and acetate ions. However, it does not fully dissociate into ions and remains mostly in the molecular form.

1-propanamine can form hydrogen bonds with water through the amine functional group, enhancing its solubility.

1-fluoropropane has a polar C-F bond and can also experience dipole-dipole interactions with water, making it more soluble.

2-propanol, or isopropyl alcohol, is capable of hydrogen bonding with water due to the presence of the hydroxyl group, increasing its solubility.

Dimethylamine can form hydrogen bonds with water through the amine functional group, resulting in higher solubility.

To learn more about the compound, follow the link:

https://brainly.com/question/14117795

#SPJ6

R= 1155×100/6000×3/12

R= 1155×2/3

Answer:

because if the hotness should more it will give it increase the temperature of earn water but it is not so because you have taken out hands from your and cold water So it is reliable

A food sample's caloric value is calculated. By dividing the total weight throughout grams of a particular food by the nutritionists' calculated energy values.

The calorie is an amount of energy that derives from the outmoded caloric concept of heat. Two primary interpretations of "calorie" are frequently used due to historical factors.

The quantity of energy needed to elevate the temperature from one water molecule through one degree Celsius is known as a big calorie, food caloric intake, dietary calorie, simply kilogram calorie. A food sample's caloric value is calculated. By dividing the total weight throughout grams of a particular food by the nutritionists' calculated energy values.

Therefore, a food sample's caloric value is calculated. By dividing the total weight throughout grams of a particular food by the nutritionists' calculated energy values.

To know more about calorie, here:

https://brainly.com/question/3541581

#SPJ2

Answer: group 16

Explanation: apex

Answer:

Temperature is a physical quantity that expresses hot and cold. It is the manifestation of thermal energy, present in all matter, which is the source of the occurrence of heat, a flow of energy, when a body is in contact with another that is colder. Temperature is measured with a thermometer.

Answer:

The degree or intensity of heat present in a substance or object

Answer:

Explanation:

1st)  one are homogenous because the have the same kind of force 9 London force ) all the hydrocarbons are nonpolar and have a London force between their molecules

 so pentane dissolve in hexane (like dissolves like )

2nd )  CBr4  has a tetrahedral shape its a nonpolar compound (London bond )

           but  the water is polar molecules  has a  ( hydrogen bond ) its  molecular shape (bent shape)  . Both do not dissolve in each other because they have a different kinds of bond so they are  not a homogenous solution .

3rd) its a homogenous because the water can dissolve the ionic bonds between the Li (  cation ) and  (NO3 -1  anion ).

4th ) here we can say alcohol can dissolve in a little amount why ?

The correct answer is C: I and ||

Scientific notation is used for very large and very small numbers.

It is more comfortable sometimes to express numbers in scientific notation. The parts of a scientific notation for number are: coefficient, base and exponent.

The larger or smaller the exponent, the more convenient it is to express the number in scientific notation.

Hence, very large and very small numbers are best expressed in scientific notation.

https://brainly.com/question/15361382

Answer:

(i). The elements that are likely to form a cation

(C). calcium, (D). barium, (E). cesium, (F). rubidium, (G).  lead and (H). scandium

(ii). The elements those that will always form ionic compounds in a 1:2 ratio with the halogens

(B).  lead, (G) barium and (I). calcium

Explanation:

Given that,

The following list of elements,

A. oxygen B. chlorine C. calcium D. barium E. cesium F. rubidium G. lead H. scandium I. phosphorous

We know that,

Cation is defined as, an element which is able to donate electron easily and obtained positive ion.

All metal elements able to form cations.

We need to find the elements that are likely to form a cation

Using given list

(C). calcium

(D). barium

(E). cesium    

(F). rubidium    

(G).  lead

(H). scandium

(II). The following list of elements,

A. phosphorous B. lead C. chlorine D. cesium E. rubidium F. scandium G. barium H. oxygen I. calcium  

We know that,

All given metal ions can form ionic compound with halogens as 1:2 ratio because all given metals can form +2 charge.

We need to calculate the elements those that will always form ionic compounds in a 1:2 ratio with the halogens

Using given list.

(B).  lead

(G) barium

(I). calcium

Hence, (i). The elements that are likely to form a cation

(C). calcium, (D). barium, (E). cesium, (F). rubidium, (G).  lead and (H). scandium

(ii). The elements those that will always form ionic compounds in a 1:2 ratio with the halogens

(B).  lead, (G) barium and (I). calcium

Answer:

to compare the data she has got?

Answer: Ecosystem services are the flows of benefits which people gain from natural ecosystems, and natural capital is the stock of natural ecosystems from which these benefits flow. So, a forest is a component of natural capital, while climate regulation or timber might be the ecosystem service it provides.

Answer:

[tex]rate=0.05\frac{mg}{min}[/tex]

Explanation:

Hello,

In this case, considering that 1 min equals 60 seconds, we need to perform the unit conversion as shown below in order to compute the rate on mg/s:

[tex]rate=3.0\frac{mg}{min}*\frac{1min}{60s} \\ \\rate=0.05\frac{mg}{min}[/tex]

Best regards.

Answer:

2100000 + 62000000

Explanation:

You move the decimal place to the right or left acording to the exponent (right if the exponent in positive, left of the exponent in negative.) Ex: if you're solving for 6.2*10^7 you move the decimal 7 places to the right.

Hope this helped,

-Kiddoo :)

Answer:

First, the direct method requires recording the total mass of solution, and then evaporating off the solvent. The solid left behind is the solute, which is then weighed and used to calculate mass percent. Density can also be used to determine the mass percent of an unknown concentration.

in my opinion:)

Answer:

The characteristcs of natural resources are commercial and industrial use.

It includes soil, salt, oil, natural gas, coal, iron.

Explanation:

4hr 30 m = 270 min

270/ 26.1 = 10. 34

1 mile per 10.34 mins

Answer:

boron has an atomic mass of 10.810 amu consists of two isotopes.

Answer:

boron has an atomic mass of 10.810 amu consists of two isotopes.

Explanation:

Answer:

When iron turns to rust, the chemical identity of the iron changes. When you break ice, the ice is still ice

Answer:

Food testing.

Beverage testing.

Drug testing.

Forensic testing.

Answer:

1. Additive detection

2. Crime scene testing

Answer:

Explanation:

The conversion of ammonium ion  into nitrate ion is a two step process which is written below .

2 NH₄⁺ + 3 O₂ =  2NO₂⁻ + 4 H⁺ + 2H₂O

2NO₂⁻ + O₂ = 2 NO₃⁻

This is a two step reaction . These steps are managed by different class of bacteria.

Answer: solid

Explanation:Ice is the solid state of water, a normally liquid substance that freezes to the solid state at temperatures of 0 °C (32 °F) or lower and expands to the gaseous state at temperatures of 100 °C (212 °F) or higher.

Answer:A integer is a whole number.

An adult with the flu has a temperature of 102°F

A brain contains  neurons (moving the decimal point to the right side power of 10 increases........here decimal point is moved to two places to the right side so power of 10 decreases from 10 to 8)

The time for a nerve impulse to travel from the feet to the brain is  s. (moving the decimal point to the right side power of 10 increases........here decimal point is moved to two places to the right side so power of 10 decreases from 0 to -2)

Explanation: i am sorry for being 2 year late :(

i hope this answer your question if this is wrong or correct please let me know

Answer:

The answer is

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

From the question

mass = 34.1 g

volume = 78.5 mL

The density is

[tex]density = \frac{34.1}{78 .5} \\ \approx 0.434394904...[/tex]

We have the final answer as

Hope this helps you

Answer:

Because both compounds (CaCl2 and CaBr2) contain elements (bromine and chlorine) from the same group (group 7)

Explanation:

Elements are organized into groups on the periodic table based on the number of valence electrons contained in their outermost shell. These elements in the same group i.e. same number of valence electrons, will behave in a similar manner chemically.

CaCl2 and CaBr2 are two compounds that contains elements (Chlorine and Bromine) from the same group, which is group 7. Elements in group 7 are called HALOGENS and have 7 valence electrons in their outermost shell.

Bromine (Br) and Chorine (Cl) are responsible for the similarity in the properties of CaCl2 and CaBr2 because the Chlorine and Bromine contained in them will cause them to react similarly and behave similarly in the presence of other compounds.

Answer:

Explanation:

Rivers may be contaminated by sewage.

I do hope I helped you! :)

Answer:

The temperature at which each bean is kept

Explanation:

Independent variable is what YOU CHANGE

The temperature at which each bean is kept is the independent variable.

INDEPENDENT VARIABLE:

Learn more: https://brainly.com/question/17498238?referrer=searchResults

Answer:

All substances can be characterized by their unique sets of physical and chemical properties.

Answer:

21. Most metals are brittle.

22. increases from top to bottom within the group

23. Neon is the most stable element because its highest occupied energy level is filled.

24. transfer of electrons

25. electrons are not shared equally between atoms

26. BeCl2

27. double-replacement and decomposition

28. exothermic

29. The reaction rate decreases.

30. The salt dissolved most quickly in the warm water.

31. saturated

32. feels slippery

33. hydroxide ions in solution

34. stay about the same

35-40. I do not know.

41. a bee hovering around a bee hive

42. the number of valence electrons in atoms of the element

Explanation:

21. Metals are ductile and malleable (conveniently also characteristics for chewing gum). They are stretchy and squishy. Brittle is the opposite of stretchy and squishy, and is a characteristic of non-metals.

22. On the periodic table, elements higher up are safer to use in labs. They are safer because they are less likely to react with other substances. Therefore the tendency to react with other substances increases from top to bottom within the group.

23. "Noble gases stable" (periodic table song by ASAP Science). Neon is a noble gas, therefore it is stable. When elements have only one electron to gain or lose, they are very reactive or least stable.

24. The formation of an ionic bond (metal + non-metal) is caused by the giving and receiving of electrons. Neutrons and protons do not transfer. Electrons are shared in covalent/molecular bonds (between non-metals).

25. A polar covalent bond occurs between non-metals, therefore they share electrons (ionic bonds transfer electrons). Non-metals become anions (whereas metals become cations). Polar bonds have unequal sharing and nonpolar bonds have equal sharing.

26. A one-to-two ratio of  beryllium ions to chloride ions means for every Be, there are two Cl. The number of atoms is represented by the ratio, and the numbers of atoms are written as subscripts after the element symbol.

27. MgCO2  reacting with HNO3  to form magnesium nitrate and carbonic acid is a double-replacement reaction. The elements in the beginning substances "switch partners" to form the products.

Carbonic acid then breaks down into water and carbon dioxide is decomposition. This occurs when the elements that make up a compound are split up.

28. In 2Cu + O2  => 2CuO + 315 kJ , the energy is on the right side. The right side is the products, or the stuff that was made. kJ is a unit to measure energy, therefore energy was made. Exothermic is the term that means energy was released.

29. Since oxygen is needed for a fire to burn, decreasing the oxygen slows the reaction rate (the reaction is burning, formally known as combustion).

30. Two things help substances dissolve: heat and stirring. Warm water is hotter than room-temperature water and ice water. This makes the salt dissolve faster.

31. A solution that contains more solute than it would normally hold is saturated. Saturated means there is a more than concentrated amount of solute in the solution. Concentrated is when there is a maximum amount of solute that will dissolve.

32. Acids do not feel slippery -- that is a characteristic of a base. To remember, bases are generally soaps and soaps are slippery. Acids taste sour  and bases taste bitter. Both acids and bases change the color of an indicator .

33. A base produces hydroxide ions, represented by OH. The OH is usually at the end of the chemical formula. Acids produce hydrogen ions, generally written at the front of the chemical formula.

34. Adding a little bit of acid to a buffer will cause the pH of the solution to stay about the same, probably increase a little. Buffer solutions are meant to make the pH "buffer". To remember, DVDs used to buffer. It's the same thing as "lag" for phones.

35-40: I'm sorry, I have no answer.

41. Electrons orbit like the plants revolve around the sun. Electrons revolve around a nucleus. A bee hovering around a bee hive  is probably flying around it in circles.

42. The tendency of an element to react is closely related to the number of valence electrons in atoms of the element.  If the valency is 8, the electron shell is full. The element is stable, opposite to reactive -- this applies to all noble gases (group 8A on the periodic table). If the valency is 1 or 7, the element is very close to being stable but not, the "desire" is so great and makes the element very reactive.

Answer:

Explanation:

Protons.

Electrons.

Neutrons.

I hope I helped you! :)

Answer:

ability to rust

Explanation:

i'm like 90% sure thats correct