Answer:
d
Explanation:
check if one element replaces another element in a compound
The single replacement reaction can be identified when there has been the replacement of one element with another element in the compound. Thus, option C is correct.
The replacement reaction can be defined as the reaction in which the highly reactive element replaced the low reactive element in the reaction and forms a compound.
The reaction has been given as:
X + AY [tex]\rightarrow[/tex] AX + Y
The X has been highly reactive than Y replaces Y in the compound and forms the compound AX.
The single replacement reaction can be identified when there has been the replacement of one element with another element in the compound. Thus, option C is correct.
For more information about a single replacement reaction, refer to the link:
https://brainly.com/question/8625202
perform the following operation and express the answer in scientific notation
Answer:
2×10⁻⁴
Explanation:
Given data:
2.8 ×10⁻⁶ + 1.4×10⁻²
Solution:
2.8 ×10⁻⁶ + 1.4×10⁻²
2×10⁻⁶⁺²
2×10⁻⁴
Scientific notation is the way to express the large value in short form.
The number in scientific notation have two parts.
. The digits (decimal point will place after first digit)
× 10 ( the power which put the decimal point where it should be)
for example the number 6324.4 in scientific notation will be written as = 6.3244 × 10³
What is the name of the group that contains potassium?
O Noble Gases
O Halogens
O Alkaline Earth Metals
O Alkali Metals
Transition Metals
Answer:
Alkali Metals
Explanation:
We breathe it out and it takes it in. Your next clue is where photosynthesis begins.
Answer:
Carbon Dioxide?
Explanation:
When we take a breath, we pull air into our lungs that contains mostly nitrogen and oxygen. When we exhale, we breathe out mostly carbon dioxide.
Click the picture please
Answer:
A chemical change can be indicated by a change in color, change in temperature (exothermic or endothermic), change in smell, formation of a precipitate, or the formation of gas bubbles.
Explanation:
this should work
When a 0.4500 g sample of impure potassium chloride was dissolved in water and treated with an excess ofsilver nitrate, 0.8402 g of silver chloride was precipitated. Calculate the percentage KCl in the original sample.
Answer:
97.78% KCl in the original sample
Explanation:
The % of KCl in the original sample would be as follows:
[tex]97.78[/tex]%
Given that,
Amount of sample of impure Potassium Chloride [tex]= 0.4500 g[/tex]
Amount of Silver Nitrate precipitated [tex]= 0.8402g[/tex]
Now,
Molarity of KCl = [tex]74.5 g/mol[/tex]
Minimum moles required for reaction [tex]= 0.0059 mol[/tex]
Final number of moles [tex]= 0.0059 mol[/tex]
So,
Concentration = Number of moles * Molarity
[tex]= 0.0059 mol * 0.74.5 g/mol\\= 0.440g[/tex]
Therefore,
% of KCl in the original Sample = Weight of Pure KCl/Weight of Impure KCl
[tex]= 0.440/0.450[/tex] × [tex]100[/tex]
[tex]= 97.78[/tex]%
Thus, [tex]97.78[/tex]% is the correct answer.
Learn more about "Potassium Chloride" here:
brainly.com/question/19613085
Which of the following best describes a vacuum?
Hot
Cold
Shiny
Empty
Answer:
hot
Explanation:
Answer:
The Answer is (Empty)
Why are ocean currents important to coastal regions?
Answer:
Warm and cold ocean currents can affect the climate of an area along the coast if the winds blow in from the ocean. Warm ocean currents heat the air above the water and carry the warm air to the land, increasing the temperature of the coastal region.
Explanation:
Ocean currents are important to coastal regions for a number of reasons.
What are the importance?Distribute heat. Ocean currents distribute heat around the globe, which helps to moderate the climate in coastal regions. For example, the Gulf Stream brings warm water from the Gulf of Mexico to the coasts of Europe, which helps to keep Europe's climate warmer than it would be otherwise.
Transport nutrients. Ocean currents transport nutrients from the ocean's depths to the surface, which supports marine life. For example, the California Current brings nutrients from the deep ocean to the surface, which supports a rich marine ecosystem off the coast of California.
Diversify marine life. Ocean currents help to diversify marine life by transporting different species to different parts of the ocean. For example, the Kuroshio Current brings warm water from the western Pacific Ocean to the eastern Pacific Ocean, which has helped to diversify the marine life in this region.
Find out more on coastal regions here: https://brainly.com/question/26796424
#SPJ6
Record the mass of the object based on the reading from the triple-beam balance. The mass of the object is ____ grams.
Hello!
[tex]\large\boxed{167g}[/tex]
Looking at the balance, we see that:
The middle beam reads 100g.
The top beam reads 60g.
The bottom beam reads 7g.
Add all of the numbers together to get the total mass:
100 + 60 + 7 = 167g.
The mass of the object is 167 grams.
Explanation:
A triple beam balance is a mass measuring instrument used in labs to measure the mass of a substance. It unit in which it measures is grams. It consists of three beams which are: The middle beam has Increments of 100 grams The front beam has Increments from 0 grams to 10 grams The farther beam has Increments of 10 gramsGiven :
Readings of all the scales of three beams of the triple beam balance of an object.
To find :
The mass of object whose reading on triple beam balance is given.
Solution:
Middle beam reader at 100 grams
Front beam reader at 7 grams
Farther beam reader at 60 grams
The mass of object:
[tex]100 grams + 7 garms + 60 grams = 167 grams[/tex]
The mass of the object is 167 grams.
Learn more about triple beam balance here:
https://brainly.com/question/12149442
As a car slows down, its kinetic energy increases.
True
False
Answer:
False.
Explanation:
Kinetic energy represents the energy the car has and is using right now. So, if the car was fast, then it would have a lot of kinetic energy. A slow car has a low amount of kinetic energy.
Define Triple point of water?
Triple point is that temperature, at which the substance is found in all three states i.e. solid, liquid and gas. Every substance has different triple point, because Triple point is just above the freezing point and each substance has different freezing and boiling point.
_____________________________________WATER:Water has a Melting point or Freezing Point (MP or FP) of [tex]0^0[/tex] C or 273K and Boiling point (BP) [tex]100^{0}[/tex] C or 373 K. Since the triple point is just above the MP or FP thus Triple Point of water is [tex]0.01^{0}[/tex]C or 273.16K.
_____________________________________Best Regards,'Borz'Answer:
0.01 degrees centigerade
Explanation:
If 9.6 X 1021 molecules of hydrogen are reacted with excess nitrogen, how many liters of ammonia can be produced at STP?
The volume of NH₃ produced at STP : 0.237 L
Further explanationReaction
N₂ + 3H₂ → 2NH₃
1 mol = 6.02 x 10²³ particles
9.6 X 10²¹ molecules of Hydrogen, mol :
[tex]\tt \dfrac{9.61\times 10^{21}}{6.02\times 10^{23}}=1.596\times 10^{-2}~moles[/tex]
mol H₂ : mol NH₃ = 3 : 2
mol NH₃ :
[tex]\tt \dfrac{2}{3}\times 1.596\times 10^{-2}=0.0106[/tex]
Conditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure). At STP, Vm is 22.4 liters/mol.
The volume of NH₃ :
[tex]\tt 0.0106\times 22.4=0.237~L[/tex]
Please help me It would mean everything!!
1. high
You are correct.
Cold region have more air pressure because air is denser.
I'll give brainliest
Answer: Nitrogen
Explanation:
im not sure for this one please help me
Answer:
Fairly certain it is the tension of the string
Answer:It would be C
I am in the second period and belong to the same family as silicon
Answer:
carbon
Explanation:
carbon has 6e- hence belong to group 4 and period 2
Answer:
Boron
Explanation:
Both silicon and boron are metalloids, and boron belongs on the second row (period)
BRAINIEST IF ANSWERED which of the following is a molecule ( A.HCl B.HK C.MgCl2 D.Kl)
Answer: A.HCI
Explanation:
A proton has a charge that is opposite the charge of
Determine the final temperature of a system, if 120 grams had an initial temperature of 80°C and mixes with 3,000 g of water at an initial temperature of 20°C
Answer:
The final temperature of the mixture is 22.3°C
Explanation:
Assuming that the 120 g substance at 80°C is water, final temperature of the mixture can be determined using the formula:
Heat lost = Heat gained
Heat = mc∆T where m is mass, c is specific heat capacity of water, and ∆T is the temperature change = Tfinal - Tinitial.
Let the final temperature be T
Heat lost = 120 × c × (T - 80)
Heat gained = 3000 × c × ( T - 20)
Equating the heat lost and heat gained
120 × c × -(T - 80) = 3000 × c × (T - 20)
9600 - 120T = 3000T - 60000
60000 + 9600 = 3000T + 120T
69600 = 3120T
T = 69600/3120
T = 22.3°C
Therefore, the final temperature of the mixture is 22.3°C
Here is the electron configuration for Argon. What does the coefficient 3 in 3s2 tell us?
Ar: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6
The coefficient 3 represents the electron shell
Further explanationIn an atom there are levels of energy in the shell and sub shell
This energy level is expressed in the form of electron configurations.
Writing electron configurations starts from the lowest to the highest sub-shell energy level. There are 4 sub-shells in the shell of an atom, namely s, p, d and f. The maximum number of electrons for each sub shell is
• s: 2 electrons
• p: 6 electrons
• d: 10 electrons and
• f: 14 electrons
Charging electrons in the sub shell uses the following sequence:
1s², 2s², 2p⁶, 3s², 3p⁶, 4s², 3d¹⁰, 4p⁶, 5s², 4d¹⁰, 5p⁶, 6s², etc.
Argon is a noble gas element with the symbol Ar with atomic number 18 and mass number 40
Electron configuration: [Ne] 3s²3p⁶
The coefficient 3 represents the electron shell, which is denoted as the quantum number n
This shell consists of 3 sub shells namely 3s, 3p and 3d which have a maximum of 18 electrons (3s = 2 electrons, 3p = 6 electrons and 3d = 10 electrons)
A student asks a serious of questions about a wave. The answer to which question will allow the student to determine whether the wave is electromagnetic or mechanical?
Answer:
Does the wave require a medium in order to travel?
Explanation:
The question whose answer would determine whether the wave in question is mechanical or electromagnetic would be if the wave requires a medium in order to travel or otherwise.
A mechanical wave would require a medium in order to transport its energy from one place to another, that is, travel. On the other hand, an electromagnetic wave does not require any medium in order to travel, that is, it can travel through vacuums or empty spaces. Light and sound waves are typical examples of electromagnetic and mechanical waves respectively.
If the pressure of a 2.00 L sample of gas is 50.0 kPa, what pressure does the gas exert if its volume is decreased to 20.0 mL?
Which equation should you use?
use B.
✔ 5000
kPa
Answer:
P₂ = 5000 KPa
Explanation:
Given data:
Initial volume = 2.00 L
Initial pressure = 50.0 KPa
Final volume = 20.0 mL (20/1000=0.02 L)
Final pressure = ?
Solution:
The given problem will be solved through the Boly's law,
"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"
Mathematical expression:
P₁V₁ = P₂V₂
P₁ = Initial pressure
V₁ = initial volume
P₂ = final pressure
V₂ = final volume
Now we will put the values in formula,
P₁V₁ = P₂V₂
50.0 KPa × 2.00L = P₂ × 0.02 L
P₂ = 100 KPa. L/0.02 L
P₂ = 5000 KPa
collectiveness leads to a good society? how
Answer:
A good society has a transparent talk, they share all matters related to the society, hence everyone knows what's going on. This is why collectiveness leads to a good society.
If my answer helped, kindly mark me as the brainliest!!
Thank You!!
What element is represented in this model of the atomic number is 3
This is science
Answer:
lithium because it has an atomic number of three(you could have just googled which element has the atomic number 3)
What liquid is the most vicious ?
A) water
B) skim milk
C)salt water
D) pancake syrup
6th grade science i mark as brainliest
Part A
What volume (in mL ) of a 0.150 M HNO3 solution will completely react with 35.7 mL of a 0.108 M Na2CO3 solution according to the following balanced chemical equation?
In the reaction in Part A, what mass (in grams) of carbon dioxide forms?
Volume HNO₃ : 51.4 ml
Mass CO₂ : 0.17 g
Further explanationReaction
Na₂CO₃ + 2 HNO₃ ⇒ 2 NaNO₃ + CO₂ + H₂O
V Na₂CO₃ = 35.7 ml
M Na₂CO₃ = 0.108
mol Na₂CO₃ :
[tex]\tt 35.7\times 0.108=3.8556~mlmol[/tex]
mol ratio Na₂CO₃ : HNO₃ = 1 : 2
mol HNO₃ :
[tex]\tt \dfrac{2}{1}\times 3.8556=7.71~mlmol[/tex]
Volume HNO₃ :
[tex]\tt mol=n=M\times V\\\\V=\dfrac{n}{M}=\dfrac{7.71}{0.15}=51.4~ml[/tex]
mol CO₂ = mol Na₂CO₃ = 3.8556 mlmol=0.00386 mol
mass CO₂(MW=44 g/mol) :
[tex]\tt 0.00386\times 44=0.17~g[/tex]
6. Write the full symbol for an atom with 1 proton, 2 neutrons, and 0 electrons.
Answer:
The element hydrogen has the simplest atoms, each with just one proton and one electron. The proton forms the nucleus, while the electron orbits around it.
Explanation:
(02.01 LC)
Which landform represents a large area of thick ice that moves slowly?
Answer:
Glacier
Explanation:
Since the replication crisis, many practices have been implemented to improve research and promote –, or the practice of sharing data and materials so they can be reviewed and replicated by other researchers. One of these practices involves submitting the proposed methods and analysis plan to journals in advance for approval or –. This practice allows scientific journals to approve experiments before they are done, with the guarantee that any finding will be published regardless of whether or not it is significant. This process also prevents researchers from –, or creating theories or hypotheses that explain the results of a study after the data has been collected.
Answer:
Since the replication crisis, many practices have been implemented to improve research and promote open science, or the practice of sharing data and materials so they can be reviewed and replicated by other researchers. One of these practices involves submitting the proposed methods and analysis plan to journals in advance for approval or preregistration. This practice allows scientific journals to approve experiments before they are done, with the guarantee that any finding will be published regardless of whether or not it is significant. This process also prevents researchers from harking, or creating theories or hypotheses that explain the results of a study after the data has been collected.
Explanation:
The blanks in the text above were filled with the terms that best fit the context and meaning of the message that the text, in general, wanted to convey. No grammatical element and no punctuation has been modified, which allows the text to maintain its original coherence and meaning.
The added terms are in agreement with the scientific denominations currently accepted.
HELP PLEASE!!!!!!!!