will give Brianliest answer. help.
consider a collusion in one dimension that invoves two objects of masses 4.5 kg and 6.2 kg the larger mass is originally at rest, and the smaller mass has an initial velocity of 16 m/s [E]. the final velocity of the larger object is 10.0 m/s [E]. calculate the final velocity of the smaller object after the collision.
Answer:6.2
Explanation:
One of the most dangerous side effects of an erupting volcano is a
Answer:
One of the most deadly effects of a volcano is the ash coming from the eruption, which carries poisonous gases that are harmful to humans, plants, and animals alike.
Explanation:
:))))))))
A dog sits on a flat surface. If the dog has a mass of 13 kg, what is the normal force acting on it?
85 N
13 N
127 N
41 N
Answer:
127
Explanation:
f(n)=mg
(13)*(9.81)
127.4N
I REALLY NEED HELP!!
The velocity of a car increases from +4.0 m/s to +16.0 m/s
in a time period of 4.0 s. What was the average
acceleration?
Answer:
Explanation:
Although we do have an equation for this in terms of one-dimensional motion, it's easy enough just to use the mathematical definition of acceleration:
[tex]a=\frac{v_f-v_0}{t}[/tex] which says, in words, the acceleration of an object is equal to the objects final velocity minus its initial velocity, divided by the change in time. Since everything is given in m and s, our answer will be in m/s/s:
[tex]a=\frac{16.0-4.0}{4.0}[/tex] and
[tex]a=\frac{12.0}{4.0}[/tex] so
a = 3.0 m/s/s
someone please help I have no idea what to do
Answer:
10⁶ or 1000000
Explanation:
formula: frequency = velocity/wavelength = [tex]\frac{3.0x10^{8} }{3.0x10^{2}}[/tex]i'm not sure because the teacher probably wrote the question wrong.Determine whether the interference is constructive or destructive at each location indicated.
A.constructive or destructive
B. constructive or destructive
C. constructive or destructive
D. constructive or destructive
Answer:
A. Constructive
B. Destructive
C. Destructive
D. Constructive
Explanation:
Constructive interference takes place at locations along the path of two superposed waves where the waves are in phase such that a high or low point of one of the waves corresponds with a high or low point of the other wave which gives a resulting wave amplitude which is the sum of the amplitudes of the individual waves
Destructive interference takes place at locations along the path of two superposed waves where one wave is out of phase with the other wave such that a high or low point of one of the waves coincides with a low or high point of the other wave respectively thereby cancelling the effect of the other wave and giving a resulting wave that has an amplitude which is the difference in the amplitudes of the individual waves
Therefore;
At point A, the peak of each wave partially coincides resulting in constructive interference
At point B, the peak of the blue wave and the trough of the red wave partially coincides resulting in destructive interference
At point C, the through of the blue wave and the peak of the back wave partially coincides resulting in destructive interference
At point D, the trough of each wave partially coincides resulting in constructive interference.
HEEEEEEELLLLLPPPPPPP 20 points and Brainliest
Why do radio telescopes convert radio waves (analog signals) to electrical (digital) signals for analysis?
Select ALL that apply
a
To reduce signal interference
b
To protect the information from Aliens
c
Data is analyzed on a computer
d
To make the data safe to analyze
Answer:
C. Data is analyzed on a computer
Explanation:
Computers can analyze electrical signals, not radio signals. This means that the radio waves need to be converted to electrical signals to help the computer analyze the data.
The local newspaper has published the passage below. Last week, scientists released incredible images of aurora australis, known as the northern lights, as seen from the Hubble telescope. The Hubble telescope was placed in orbit in 1990 by the space shuttle and has since delivered the sharpest images we have of our planet, our galaxy, and the universe. The images delivered last week show the beautiful display of lights in the southern hemisphere. These lights are the result of the solar activity known as solar wind. Traces of solar wind reach well beyond Earth and have been detected as far as Saturn. Which statement in the news passage above is inaccurate
Answer:
The statement as aurora australis known as northern lights is incorrect. As the designation of aurora australis is for the southern lights i.e. which occur in the southern hemisphere.
Explanation:
Aurora or natural lights is a phenomenon that occurs at the poles of the Earth due to interaction between the Earth's magnetic field and cosmic rays. This interaction results in the beautiful display of colors on both poles. These are named, aurora borealis or aurora australis depending on their geographical location. If they occur on the northern pole they are termed as aurora borealis while those occurring on the southern pole are named aurora australis.
Answer:
C. The aurora australis is known as the northern lights.
Explanation
The answer on edge
2. Why is alcohol thermometer not suitable to measure high temperature?
Answer:
Alcohol thermometers are used rather than mercury thermometers in very cold regions because alcohol has a lower freezing point than mercury. Pure ethanol freezes at -115 degrees C, while mercury freezes at -38 degrees C.
Explanation:
It is less durable because alcohol evaporates faster than mercury. It cannot measure high temperature because of a low boiling point. It wets the walls of the thermometer, which can adversely impact the accuracy of readings
Calculate frequency if wavelength is 35 m and wave speed is 546 m/s.
25.6 Hz
15.6 Hz
390 Hz
.06 Hz
The world's longest continuous mountain ridge is under the ocean.
True
False
Please hurry!!!
Answer:
True
Explanation:
______is when different species live in close association.
Answer:
Symbiosis
Explanation:
When you have a symbiotic relationship, it is between two or more organisms of different species.
Can you please answer my question correctly ASAP
Answer:
1) C, 2) C, 3) B, 4) D, 5) A/B, 6) D, 7) D, 8) A, 9) B, 10) A
Explanation:
1) Seconds, minutes and days are time units. (Correct answer: C)
2) The displacement is shortest distance between the point of origin and the point of destination. (Correct answer: C)
3) The velocity is the rate of change of position in time. (Correct answer: B)
4) Graphs are a very useful ressource to infer characteristics inherent to a studied physical variable. (Correct answer: D)
5) There are two possible answers, since both milimeters and meters are units for distance. (Correct answers: A/B)
6) The distance is the arc length of the entire path that object travelled. (Answer: D)
7) Traditionally, in a position vs. time graph we plot time in the x-axis. (Answer: D)
8) In this case, we use a distance-time graph, where travelled distance is the dependent variable and time is the independent variable. (Answer: A)
9) The point of origin is the initial position of the object. (Answer: B)
10) The point of destination is the final position of the object. (Answer: A)
Which of the following shows the relationship between work and energy?
O A. Work = total energy
B. Work = gravitational potential energy
C. Work = change in kinetic energy
D. Work = change in nonconservative forces
MIDDLE SCHOOL: What are the three types of energy used when cleaning? (Please write them in order of occurrence)
Answer:
Chemical, mechanical, thermal i guess
Earth is protected from meteorites by... (please help T-T 10 points)
a. the Moon
b. the atmosphere
c. other planets
d. the Sun
What concept does the image above show?
The carbon cycle relies on producers and consumers to survive. What is the role of each in the carbon cycle?
What is happening when an oxygen molecule is formed from two separate oxygen atoms?
Two from each oxygen atom. For examples of covalent bonding are water (H2O), and carbon dioxide (CO2). Covalent compounds are mostly gases or liquids with low melting points.
Fusion produces less radioactivity than fission.
True or false
Answer:
False
Explanation:
Fusion doesn't produce more.
Explain how surface waves can have characteristics of both longitudinal waves and transverse waves. Please use 3 content related sentences
Answer:
they can have both ways because it turns out that they can go into different ways light waves are associated with constantly like her to certain ways or
most people use the term light waves when they usually mean visible light in physics however these terms like veins are trying to be used as a synonym of electronic waves electric razor made of skull in magnetic and electric field like always they carry energy
A meteor moving through space speeds up as it gets closer to Earth. What force causes the meteor's speed to increase the closer it gets to Earth?
PLS Help
Answer:
gravity
Explanation:
its hard to explain its one of the resons we do gravity assists for space probes and such the meteor will catch earths gravity and be pulled in by it if you look at sednas orbit as it gets closer to the sun it speeds up.
The force that causes the meteor's speed to increase as it gets closer to Earth is the gravitational force of earth.
What is meant by gravity ?Gravity is defined as the force by which a planet attracts another body towards its center.
Here,
The meteor was moving through space and the speed of the meteor started increasing as it moves closer to the earth.
This is because of the gravitational force of earth that is being exerted on the meteor. Gravitational force of earth is defined as the force of attraction that the earth exerts on another body in its gravitational field and draws them towards the center of the earth.
As the meteor moves towards the earth's , it gets accelerated by the earth's gravitational field such that the speed of the meteor increases and thus it attains more kinetic energy. As a result, the meteor moves faster when it gets closer to earth. This is because of the force of gravity of the earth.
Hence,
The force that causes the meteor's speed to increase as it gets closer to Earth is the gravitational force of earth.
To learn more about gravity, click:
https://brainly.com/question/14874038
#SPJ3
Would the following reaction be endothermic or exothermic? Why?
CH4 + 02 --> CO2 + H2O + Energy
A. Exothermic because energy is a reactant
B. Endothermic because energy is a reactant
C. Endothermic because energy is a product
D. Exothermic because energy is a product
Answer:
Exothermic because energy is a product
Explanation:
Since energy is a product, heat was released, meaning that the reaction is exothermic.
3. The coefficient of kinetic friction between an object and the surface upon which it is sliding is
0.40. The mass of the object is 3,2 kg. What is the force of friction?
Answer:
2
Explanation:
how dose storing waste underground can be effected by ground water in aquifers
Answer:
it can contaminate the water
Explanation:
I hope this helps ;)
what is the difference between storm spotter and storm chaser?
Answer:
this is just a guess
Explanation:
a storm spotter only spots the storm and a storm chaser looks for the storm????
imagine no girls awnser this question ://
Answer:
im confused
Explanation:
A cruise ship travels across a river at 25 meters per minute. If the river is 6200 meters wide, how long
does it take the ship to reach the other side.
Answer:
248 minutes
Explanation:
6200/25=248
This means there is 248 25s in 6200
which means it will take 248 minutes to travel through the river
Also here's a neat trick:
The units for speed is meters/minute
The units for distance is meters
Dividing distance by speed will cancel out the meters and leave only the speed.
A girl runs 40m due south in 40 seconds an d then 20m due north in 10 secondsCalculate.
the average speed,
her average velocity .
in her change in velocity for the whole journey!
The average speed of the girl is 1.2 m/s.
Average velocity is defined as the trade in position or displacement (∆x) divided by the time durations (∆t) wherein the displacement takes place. The common velocity can be effective or negative depending upon the sign of the displacement. The SI unit of average velocity is meters per second (m/s or ms-1).
Given;
Total distance = 40 + 20 = 60 M
Displacement = 40 - 20 = 20 m south
total time = 40 + 10 = 50 seconds
Average speed = total distance / total time
= 60/50
= 1.2 m/s
average velocity = total displacement / total time
= 20 / 50
= 0.4 m/s due south.
Average velocity is calculated by means of dividing your displacement (a vector pointing out of your initial role in your final position) through the entire time; the average pace is calculated by way of dividing the overall distance you traveled by means of the total time.
Learn more about average velocity here:-brainly.com/question/1844960
#SPJ1
PLZZ HELP ME PLZ I NEED YALL HELP WITH THIS LAST QUESTION
Answer:
The 5 Forces
Explanation:
The five forces that influence wind speed and direction are: Pressure gradient force (flow from high to low pressure) Coriolis force (apparent deflecting force due to the rotation of the Earth) Turbulent drag (Earth's surface or objects like trees or grass resist air flow and decrease wind speed near the ground)