The rod is sheared through a distance of 2.0 mm as a result of the applied force.
When a shearing force of 100 N is applied to an aluminum rod with a length of 20 m, a cross-sectional area of 1.0 x 10-5 m², and a shear modulus of 2.5 x 1010 N/m², the rod is sheared through a distance of 2.0 mm.
What is the Shear Modulus? The modulus of rigidity, also known as the shear modulus, relates the stress on an object to its elastic deformation. It is a measure of a material's ability to withstand deformation under shear stress without cracking. The units of shear modulus are the same as those of Young's modulus, which is N/m² in SI units.
The shear modulus is calculated by dividing the shear stress by the shear strain. The formula for shear modulus is given as; Shear Modulus = Shear Stress/Shear Strain.
How to calculate the distance through which the rod is sheared?
The formula for shearing strain is given as;
Shear Strain = Shear Stress/Shear Modulus
= F/(A*G)*L
where, F = Shear force
A = Cross-sectional area
G = Shear modulus
L = Length of the rod Using the above formula, we have;
Shear strain = 100/(1.0 x 10^-5 x 2.5 x 10^10) * 20
= 2.0 x 10^-3 m = 2.0 mm
Therefore, the rod is sheared through a distance of 2.0 mm.
When a force is applied to a material in a direction parallel to its surface, it experiences a shearing stress. The ratio of shear stress to shear strain is known as the shear modulus. The shear modulus is a measure of the stiffness of a material to shear deformation, and it is expressed in units of pressure or stress.
Shear modulus is usually measured using a torsion test, in which a metal cylinder is twisted by a torque applied to one end, and the resulting deformation is measured. The modulus of rigidity, as the shear modulus is also known, relates the stress on an object to its elastic deformation.
It is a measure of a material's ability to withstand deformation under shear stress without cracking. The shear modulus is used in the analysis of the stress and strain caused by torsional loads.
A shearing force of 100 N is applied to an aluminum rod with a length of 20 m, a cross-sectional area of 1.0 x 10-5 m², and a shear modulus of 2.5 x 1010 N/m².
To know more about force visit:
https://brainly.com/question/30507236
#SPJ11
Question 10 Bi-214 has a half-life of 19.7 minutes. A sample of 100g of Bi-124 is present initially. What mass of Bi-124 remains 98.5 minutes later? a A. 6.25 g B. 19,7 g C. 3.125g D. 20 g
10 Bi-214 has a half-life of 19.7 minutes. A sample of 100g of Bi-124 is present initially, the mass of Bi-124 remains 98.5 minutes later is C. 3.125g.
The half-life of a substance is the time it takes for the quantity of that substance to reduce to half of its original quantity. In this case, we are looking at the half-life of Bi-214, which is 19.7 minutes. This means that if we start with 100g of Bi-214, after 19.7 minutes, we will have 50g left. After another 19.7 minutes, we will have 25g left, and so on. Now, we are asked to find out what mass of Bi-214 remains after 98.5 minutes.
We can do this by calculating the number of half-lives that have passed, and then multiplying the initial mass by the fraction remaining after that many half-lives. In this case, we have: 98.5 / 19.7 = 5 half-lives.
So, after 5 half-lives, the fraction remaining is (1/2)^5 = 1/32.
Therefore, the mass remaining is: 100g x 1/32 = 3.125g. Hence, the correct option is C. 3.125g.
Learn more about fraction at:
https://brainly.com/question/29766013
#SPJ11
Suppose the magnetic field along an axis of a cylindrical region is given by B₂ = Bo(1 + vz²) sin wt, where is a constant. Suppose the o-component of B is zero, that is B = 0. (a) Calculate the radial B,(s, z) using the divergence of the magnetic field. (b) Assuming there is zero charge density p, show the electric field can be given by 1 E = (1 + vz²) Bow coswto, using the divergence of E and Faraday's Law. (c) Use Ampere-Maxwell's Equation to find the current density J(s, z).
a) The radial component of the magnetic field is:
B_r = Bo(2vwtz + C₁)
b) The radial component of the electric field is:
E_r = -2v Bow (vz/wt) sin(wt) - 2v Bow C₂
Comparing this with the given expression (1 + vz²) Bow cos(wt), we can equate the corresponding terms:
-2v Bow (vz/wt) sin(wt) = 0
This implies that either v = 0 or w = 0. However, since v is given as a constant, it must be that w = 0.
c) The current density J:
J = ε₀ Bow (1 + vz²) sin(wt)
Explanation:
To solve the given problem, we'll go step by step:
(a) Calculate the radial B(r, z) using the divergence of the magnetic field:
The divergence of the magnetic field is given by:
∇ · B = 0
In cylindrical coordinates, the divergence can be expressed as:
∇ · B = (1/r) ∂(rB_r)/∂r + ∂B_z/∂z + (1/r) ∂B_θ/∂θ
Since B does not have any θ-component, we have:
∇ · B = (1/r) ∂(rB_r)/∂r + ∂B_z/∂z = 0
We are given that B_θ = 0, and the given expression for B₂ can be written as B_z = Bo(1 + vz²) sin(wt).
Let's find B_r by integrating the equation above:
∂B_z/∂z = Bo ∂(1 + vz²)/∂z sin(wt) = Bo(2v) sin(wt)
Integrating with respect to z:
B_r = Bo(2v) ∫ sin(wt) dz
Since the integration of sin(wt) with respect to z gives us wtz + constant, we can write:
B_r = Bo(2v) (wtz + C₁)
where C₁ is the constant of integration.
So, the radial component of the magnetic field is:
B_r = Bo(2vwtz + C₁)
(b) Assuming zero charge density p, show the electric field can be given by E = (1 + vz²) Bow cos(wt) using the divergence of E and Faraday's Law:
The divergence of the electric field is given by:
∇ · E = ρ/ε₀
Since there is zero charge density (ρ = 0), we have:
∇ · E = 0
In cylindrical coordinates, the divergence can be expressed as:
∇ · E = (1/r) ∂(rE_r)/∂r + ∂E_z/∂z + (1/r) ∂E_θ/∂θ
Since E does not have any θ-component, we have:
∇ · E = (1/r) ∂(rE_r)/∂r + ∂E_z/∂z = 0
Let's find E_r by integrating the equation above:
∂E_z/∂z = ∂[(1 + vz²) Bow cos(wt)]/∂z = -2vz Bow cos(wt)
Integrating with respect to z:
E_r = -2v Bow ∫ vz cos(wt) dz
Since the integration of vz cos(wt) with respect to z gives us (vz/wt) sin(wt) + constant, we can write:
E_r = -2v Bow [(vz/wt) sin(wt) + C₂]
where C₂ is the constant of integration.
So, the radial component of the electric field is:
E_r = -2v Bow (vz/wt) sin(wt) - 2v Bow C₂
Comparing this with the given expression (1 + vz²) Bow cos(wt), we can equate the corresponding terms:
-2v Bow (vz/wt) sin(wt) = 0
This implies that either v = 0 or w = 0. However, since v is given as a constant, it must be that w = 0.
(c) Use Ampere-Maxwell's Equation to find the current density J(s, z):
Ampere-Maxwell's equation in differential form is given by:
∇ × B = μ₀J + μ₀ε₀ ∂E/∂t
In cylindrical coordinates, the curl of B can be expressed as:
∇ × B = (1/r) ∂(rB_θ)/∂z - ∂B_z/∂θ + (1/r) ∂(rB_z)/∂θ
Since B has no θ-component, we can simplify the equation to:
∇ × B = (1/r) ∂(rB_z)/∂θ
Differentiating B_z = Bo(1 + vz²) sin(wt) with respect to θ, we get:
∂B_z/∂θ = -Bo(1 + vz²) w cos(wt)
Substituting this back into the curl equation, we have:
∇ × B = (1/r) ∂(rB_z)/∂θ = -Bo(1 + vz²) w (1/r) ∂(r)/∂θ sin(wt)
∇ × B = -Bo(1 + vz²) w ∂r/∂θ sin(wt)
Since the cylindrical region does not have an θ-dependence, ∂r/∂θ = 0. Therefore, the curl of B is zero:
∇ × B = 0
According to Ampere-Maxwell's equation, this implies:
μ₀J + μ₀ε₀ ∂E/∂t = 0
μ₀J = -μ₀ε₀ ∂E/∂t
Taking the time derivative of E = (1 + vz²) Bow cos(wt), we get:
∂E/∂t = -Bow (1 + vz²) sin(wt)
Substituting this into the equation above, we have:
μ₀J = μ₀ε₀ Bow (1 + vz²) sin(wt)
Finally, dividing both sides by μ₀, we obtain the current density J:
J = ε₀ Bow (1 + vz²) sin(wt)
To know more about Faraday's Law, visit:
https://brainly.com/question/32089008
#SPJ11
QUESTION 3 What is the mutual inductance in nk of these two loops of wire? Loop 1 Leop 44 20 Both loops are rectangles, but the length of the horizontal components of loop 1 are infinite compared to the size of loop 2 The distance d-5 cm and the system is in vacuum
Mutual inductance is an electromagnetic quantity that describes the induction of one coil in response to a variation of current in another nearby coil.
Mutual inductance is denoted by M and is measured in units of Henrys (H).Given that both loops are rectangles, the length of the horizontal components of loop 1 are infinite compared to the size of loop 2. The distance d-5 cm and the system is in vacuum, we are to calculate the mutual inductance of both loops.
The formula for calculating mutual inductance is given as:
[tex]M = (µ₀ N₁N₂A)/L, whereµ₀ = 4π × 10−7 H/m[/tex] (permeability of vacuum)
N₁ = number of turns of coil
1N₂ = number of turns of coil 2A = area of overlap between the two coilsL = length of the coilLoop 1,Leop 44,20 has a rectangular shape with dimensions 44 cm and 20 cm, thus its area
[tex]A1 is: A1 = 44 x 20 = 880 cm² = 0.088 m²[/tex].
Loop 2, on the other hand, has a rectangular shape with dimensions 5 cm and 20 cm, thus its area A2 is:
[tex]A2 = 5 x 20 = 100 cm² = 0.01 m².[/tex]
To know more about electromagnetic visit:
https://brainly.com/question/23727978
#SPJ11
A solenoid with 32 turns per centimeter carries a current I. An electron moves within the solenoid in a circle that has a radius of 2.7 cm and is perpendicular to the axis of the solenoid. If the speed of the electron is 4.0 x 105 m/s, what is I (in A)?
When a current flows through a solenoid, it generates a magnetic field. The magnetic field is strongest in the center of the solenoid and its strength decreases as the distance from the center of the solenoid increases.
The magnetic field produced by a solenoid can be calculated using the following formula:[tex]B = μ₀nI[/tex].
where:B is the magnetic fieldμ₀ is the permeability of free spacen is the number of turns per unit length of the solenoidI is the current flowing through the solenoid.The magnetic field produced by a solenoid can also be calculated using the following formula:B = µ₀nI.
When an electron moves in a magnetic field, it experiences a force that is perpendicular to its velocity. This force causes the electron to move in a circular path with a radius given by:r = mv/qB.
where:r is the radius of the circular path m is the mass of the electron v is the velocity of the electronq is the charge on the electronB is the magnetic fieldThe speed of the electron is given as v = 4.0 x 10⁵ m/s.
To know more about solenoid visit:
https://brainly.com/question/21842920
#SPJ11
A 110 kg man lying on a surface of negligible friction shoves a 155 g stone away from him, giving it a speed of 17.0 m/s. What speed does the man acquire as a result?
A 110 kg man lying on a surface of negligible friction shoves a 155 g stone away from him, giving it a speed of 17.0 m/s then the man's speed remains zero.
We have to determine the speed that the man acquires as a result when he shoves the 155 g stone away from him. Since there is no external force acting on the system, the momentum will be conserved. So, before the man shoves the stone, the momentum of the system will be:
m1v1 = (m1 + m2)v,
where v is the velocity of the man and m1 and m2 are the masses of the man and stone respectively. After shoving the stone, the system momentum becomes:(m1)(v1) = (m1 + m2)v where v is the final velocity of the system. Since momentum is conserved:m1v1 = (m1 + m2)v Hence, the speed that the man acquires as a result when he shoves the 155 g stone away from him is given by v = (m1v1) / (m1 + m2)= (110 kg)(0 m/s) / (110 kg + 0.155 kg)= 0 m/s
Therefore, the man's speed remains zero.
To learn more about friction visit
https://brainly.com/question/28356847
#SPJ11
1- Electromagnetic spectrum (complete), 2- Properties of waves, 3- Properties of particles, 4- Where does the classical model fail? 5- Express the wave-particle duality nature, 6- Express (in equation form): - particle properties of waves, -wave properties of particles; 7- Express the uncertainty principle (in equation forms); 8- Bohr's postulates, 9- Where did the Bohr model fail? 10- Wave function: - what is it? - what does it describe? - what information can we find using it 11- The requirements that a wave function must fulfill?? 12- Schrodinger equation,
The electromagnetic spectrum refers to the range of all possible electromagnetic waves, including radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.Waves possess properties such as wavelength, frequency, amplitude, and speed, and they can exhibit phenomena like interference, diffraction, and polarization.Particles have properties like mass, charge, and spin, and they can exhibit behaviors such as particle-wave duality and quantum effects.
The classical model fails to explain certain phenomena observed at the atomic and subatomic levels, such as the quantization of energy and the wave-particle duality nature of particles.
The wave-particle duality nature expresses that particles can exhibit both wave-like and particle-like properties, depending on how they are observed or measured.
The wave-particle duality is expressed through equations like the de Broglie wavelength (λ = h / p) that relates the wavelength of a particle to its momentum, and the Einstein's energy-mass equivalence (E = mc²) which shows the relationship between energy and mass.
The uncertainty principle, formulated by Werner Heisenberg, states that the simultaneous precise measurement of certain pairs of physical properties, such as position and momentum, is impossible. It is mathematically expressed as Δx * Δp ≥ h/2, where Δx represents the uncertainty in position and Δp represents the uncertainty in momentum.
Bohr's postulates were proposed by Niels Bohr to explain the behavior of electrons in atoms. They include concepts like stationary orbits, quantization of electron energy, and the emission or absorption of energy during transitions between energy levels.
The Bohr model fails to explain more complex atoms and molecules and does not account for the wave-like behavior of particles.
The wave function is a fundamental concept in quantum mechanics. It is a mathematical function that describes the quantum state of a particle or a system of particles. It provides information about the probability distribution of a particle's position, momentum, energy, and other observable quantities.
A wave function must fulfill certain requirements, such as being continuous, single-valued, and square integrable. It must also satisfy normalization conditions to ensure that the probability of finding the particle is equal to 1.
The Schrödinger equation is a central equation in quantum mechanics that describes the time evolution of a particle's wave function. It relates the energy of the particle to its wave function and provides a mathematical framework for calculating various properties and behaviors of quantum systems.
Learn more about Electromagnetic spectrum:
https://brainly.com/question/23727978
#SPJ11
An open cylindrical tank with radius of 0.30 m and a height of 1.2 m is filled with water. Determine the spilled volume of the water if it was rotated by 90 rpm.
Choices:
a) 0.095 cu.m.
b) 0.085 cu.m.
c) 0.047 cu.m.
d) 0.058 cu.m.
The spilled volume of water from the open cylindrical tank, when rotated at 90 rpm, is approximately 0.095 cubic meters.
When the cylindrical tank is rotated, the water inside experiences centrifugal force. This force pushes the water towards the outer edges of the tank, causing it to rise and potentially spill over. To determine the spilled volume, we need to calculate the difference in height between the water level at rest and the water level when the tank is rotating at 90 rpm.
First, we calculate the circumference of the tank using the formula: circumference = 2πr, where r is the radius. Plugging in the given radius of 0.30 meters, we get a circumference of approximately 1.89 meters.
Next, we need to determine the distance traveled by a point on the water's surface when the tank completes one revolution at 90 rpm. To do this, we use the formula: distance = (circumference × rpm) / 60. Substituting the values, we find the distance traveled per minute is approximately 2.98 meters.
Since the tank has a height of 1.2 meters, the ratio of the distance traveled to the tank height is approximately 2.48. This means that the water level will rise by 2.48 times the height of the tank when rotating at 90 rpm.
Finally, we calculate the spilled volume by subtracting the initial height of the water from the increased height. The spilled volume is given by the formula: volume = πr^2(h_new - h_initial), where r is the radius and h_new and h_initial are the new and initial heights of the water, respectively.
Plugging in the values, we get: volume = π(0.3^2)(1.2 × 2.48 - 1.2) ≈ 0.095 cubic meters.Therefore, the spilled volume of water is approximately 0.095 cubic meters.
Learn more about spilled volume
brainly.com/question/11799197
#SPJ11
A lamp located 3 m directly above a point P on the floor of a
room produces at P an illuminance of 100 lm/m2. (a) What is the
luminous intensity of the lamp? (b) What is the illuminance
produced at an
A lamp located 3 m directly above a point P on the floor of a room produces at P an illuminance of 100 lm/[tex]m^2[/tex], the illuminance at the point 1 m distant from point P is 56.25 lm/[tex]m^2[/tex].
We can utilise the inverse square law for illuminance to address this problem, which states that the illuminance at a point is inversely proportional to the square of the distance from the light source.
(a) To determine the lamp's luminous intensity, we must first compute the total luminous flux emitted by the lamp.
Lumens (lm) are used to measure luminous flux. Given the illuminance at point P, we may apply the formula:
Illuminance = Luminous Flux / Area
Luminous Flux = Illuminance * Area
Area = 4π[tex]r^2[/tex] = 4π[tex](3)^2[/tex] = 36π
Luminous Flux = 100 * 36π = 3600π lm
Luminous Intensity = Luminous Flux / Solid Angle = 3600π lm / 4π sr = 900 lm/sr
Therefore, the luminous intensity of the lamp is 900 lumens per steradian.
b. To find the illuminance at a point 1 m distant from point P:
Illuminance = Illuminance at point P * (Distance at point P / Distance at new point)²
= 100 * [tex](3 / 4)^2[/tex]
= 100 * (9/16)
= 56.25 [tex]lm/m^2[/tex]
Therefore, the illuminance at the point 1 m distant from point P is 56.25 [tex]lm/m^2[/tex]
For more details regarding illuminance, visit:
https://brainly.com/question/29156148
#SPJ4
Your question seems incomplete, the probable complete question is:
A lamp located 3 m directly above a point P on the floor of a room produces at Pan illuminance of 100 lm/m2. (a) What is the luminous intensity of the lamp? (b) What is the illuminance produced at another point on the floor, 1 m distant from P.
a) I = (100 lm/m2) × (3 m)2I = 900 lm
b) Illuminance produced at a distance of 5 m from the lamp is 36 lm/m2.
(a) The luminous intensity of the lamp is given byI = E × d2 where E is the illuminance, d is the distance from the lamp, and I is the luminous intensity. Hence,I = (100 lm/m2) × (3 m)2I = 900 lm
(b) Suppose we move to a distance of 5 m from the lamp. The illuminance produced at this distance will be
E = I/d2where d = 5 m and I is the luminous intensity of the lamp. Substituting the values, E = (900 lm)/(5 m)2E = 36 lm/m2
Therefore, the illuminance produced at a distance of 5 m from the lamp is 36 lm/m2. This can be obtained by using the formula E = I/d2, where E is the illuminance, d is the distance from the lamp, and I is the luminous intensity. Luminous intensity of the lamp is 900 lm.
Learn more about luminous intensity
brainly.com/question/32005476
#SPJ11
Real images formed by a spherical mirror are always: A. on the side of the mirror opposite the source B. on the same side of the mirror as the source but closer to the mirror than the source C. on the same side of the mirror as the source but never any further from the mirror than the focal point D. on the same side of the mirror as the source but never any closer to the mirror than the focal point E. none of the above
The correct option is D. on the same side of the mirror as the source but never any closer to the mirror than the focal point.
A spherical mirror is a mirror that has a spherical shape like a ball. A spherical mirror is either concave or convex. The mirror has a center of curvature (C), a radius of curvature (R), and a focal point (F).
When a ray of light traveling parallel to the principal axis hits a concave mirror, it is reflected through the focal point. It forms an image that is real, inverted, and magnified when the object is placed farther than the focal point. If the object is placed at the focal point, the image will be infinite.
When the object is placed between the focal point and the center of curvature, the image will be real, inverted, and magnified, while when the object is placed beyond the center of curvature, the image will be real, inverted, and diminished.
In the case of a convex mirror, when a ray of light parallel to the principal axis hits the mirror, it is reflected as if it came from the focal point. The image that is formed by a convex mirror is virtual, upright, and smaller than the object.
The image is always behind the mirror, and the image distance (di) is negative. Therefore, the correct option is D. on the same side of the mirror as the source but never any closer to the mirror than the focal point.
Learn more About focal point from the given link
https://brainly.com/question/30761313
#SPJ11
6) Find the buoyant force on a 0.1 m3 block of wood with density 700 kg/m3 floating in a freshwater lake. (5 pts)
The buoyant force on the 0.1 m3 block of wood with a density of 700 kg/m3 floating in a freshwater lake is 686 N.
Buoyancy is the upward force exerted on an object immersed in a liquid and is dependent on the density of both the object and the liquid in which it is immersed. The weight of the displaced liquid is equal to the buoyant force acting on an object. In this case, the volume of the block of wood is 0.1 m3 and its density is 700 kg/m3. According to Archimedes' principle, the weight of the displaced water is equal to the buoyant force. Therefore, the buoyant force on the block of wood floating in the freshwater lake can be calculated by multiplying the volume of water that the block of wood displaces (0.1 m3) by the density of freshwater (1000 kg/m3), and the acceleration due to gravity (9.81 m/s2) as follows:
Buoyant force = Volume of displaced water x Density of freshwater x Acceleration due to gravity
= 0.1 m3 x 1000 kg/m3 x 9.81 m/s2
= 981 N
However, since the density of the block of wood is less than the density of freshwater, the weight of the block of wood is less than the weight of the displaced water. As a result, the buoyant force acting on the block of wood is the difference between the weight of the displaced water and the weight of the block of wood, which can be calculated as follows:
Buoyant force = Weight of displaced water -
Weight of block of wood
= [Volume of displaced water x Density of freshwater x Acceleration due to gravity] - [Volume of block x Density of block x Acceleration due to gravity]
= [0.1 m3 x 1000 kg/m3 x 9.81 m/s2] - [0.1 m3 x 700 kg/m3 x 9.81 m/s2]
= 686 N
Therefore, the buoyant force acting on the 0.1 m3 block of wood with a density of 700 kg/m3 floating in a freshwater lake is 686 N.
To learn more about buoyant force click brainly.com/question/11884584
#SPJ11
Pilings are driven into the ground at a buiding site by dropping a 2050 kg object onto theri. What ehange in gravitational potential enerify does the object undergo if it is released from rest 17,0 m above the jorvund and ends up 130 rabove the growad?
The change in gravitational potential energy that the object undergoes if it is released from rest 17.0 m above the ground and ends up 1.30m above the ground is -28,869.5 J.
The change in gravitational potential energy is equal to the product of the object's mass, gravitational acceleration, and the difference in height or altitude (initial and final heights) of the object.
In other words, the formula for gravitational potential energy is given by : ΔPEg = m * g * Δh
where
ΔPEg is the change in gravitational potential energy.
m is the mass of the object.
g is the acceleration due to gravity
Δh is the change in height or altitude
Here, the object has a mass of 2050 kg and is initially at a height of 17.0 m above the ground and then falls to 1.30 m above the ground.
Thus, Δh = 17.0 m - 1.30 m = 15.7 m
ΔPEg = 2050 kg * 9.81 m/s² * 15.7 m
ΔPEg = 319,807.35 J
The object gained 319,807.35 J of gravitational potential energy.
However, the question is asking for the change in gravitational potential energy of the object.
Therefore, the final step is to subtract the final gravitational potential energy from the initial gravitational potential energy.
The final gravitational potential energy can be calculated using the final height of the object.
Final potential energy = m * g * hfinal= 2050 kg * 9.81 m/s² * 1.30 m = 26,618.5 J
Thus, ΔPEg = PEfinal - PEinitial
ΔPEg = 26,618.5 J - 346,487.0 J
ΔPEg = -28,869.5 J
Therefore, the change in gravitational potential energy that the object undergoes is -28,869.5 J.
To learn more about gravitational potential energy :
https://brainly.com/question/3120930
#SPJ11
< Question 11 of 16 > You have a string with a mass of 0.0137 kg. You stretch the string with a force of 8.51 N, giving it a length of 1.87 m. Then, you vibrate the string transversely at precisely the frequency that corresponds to its fourth normal mode; that is, at its fourth harmonic. What is the wavelength 24 of the standing wave you create in the string? What is the frequency f4? 24 m f4= Hz =
The wavelength of the standing wave created in the string is 0.124 meters (m), and the frequency of the fourth harmonic, denoted as [tex]f_4[/tex], is 64.52 Hz.
The speed of a wave on a string is given by the equation [tex]v = \sqrt{(T/\mu)}[/tex], where v represents the velocity of the wave, T is the tension in the string, and μ is the linear mass density of the string. Linear mass density (μ) is calculated as μ = m/L, where m is the mass of the string and L is the length of the string.
Using the given values, we can calculate the linear mass density:
μ = 0.0137 kg / 1.87 m = 0.00732 kg/m.
Next, we need to determine the speed of the wave. The tension in the string (T) is provided as 8.51 N. Plugging in the values,
we have v = √(8.51 N / 0.00732 kg/m) ≈ 42.12 m/s.
For a standing wave, the relationship between wavelength (λ), frequency (f), and velocity (v) is given by the formula λ = v/f. In this case, we are interested in the fourth harmonic, which means the frequency is four times the fundamental frequency.
Since the fundamental frequency (f1) is the frequency of the first harmonic, we can find it by dividing the velocity (v) by the wavelength (λ1) of the first harmonic. However, the wavelength of the first harmonic corresponds to the length of the string,
so [tex]\lambda_ 1 = L = 1.87 m.[/tex]
Now we can calculate the wavelength of the fourth harmonic (λ4). Since the fourth harmonic is four times the fundamental frequency,
we have λ4 = λ1/4 = 1.87 m / 4 ≈ 0.4675 m.
Finally, we can calculate the frequency of the fourth harmonic (f4) using the equation [tex]f_4[/tex]= v/λ4 = 42.12 m/s / 0.4675 m ≈ 64.52 Hz.
Therefore, the wavelength of the standing wave is approximately 0.124 m, and the frequency of the fourth harmonic is approximately 64.52 Hz.
To learn more about frequency here brainly.com/question/14316711
#SPJ11
two converging lenses each with focal lengths f are a distance 4f apart. An object is placed at distance 2f. Determine the position and type of the final image. Also draw a ray diagram if possible
The final image is virtual and located at a distance of 2f from the second lens.
When two converging lenses are placed a distance of 4f apart and an object is placed at a distance of 2f from the first lens, we can determine the position and type of the final image by considering the lens formula and the concept of lens combinations.
Since the object is placed at 2f, which is equal to the focal length of the first lens, the light rays from the object will emerge parallel to the principal axis after passing through the first lens. These parallel rays will then converge towards the second lens.
As the parallel rays pass through the second lens, they will appear to diverge from a virtual image point located at a distance of 2f on the opposite side of the second lens. This virtual image is formed due to the combined effect of the two lenses and is magnified compared to the original object.
The final image is virtual because the rays do not actually converge at a point on the other side of the second lens. Instead, they appear to diverge from the virtual image point.
A ray diagram can be drawn to illustrate this setup, showing the parallel rays emerging from the first lens, converging towards the second lens, and appearing to diverge from the virtual image point.
Learn more about image visit
brainly.com/question/30725545
#SPJ11
7. Calculate the centripetal force (in N) of a 2 kg object revolving in a circle with a radius of 0.5 m at a velocity of 6 m/s?
The centripetal force of the object is 144 Newtons.
The centripetal force (Fc) can be calculated using the following equation:
Fc = (m * v^2) / r
where:
- Fc is the centripetal force,
- m is the mass of the object (2 kg),
- v is the velocity of the object (6 m/s), and
- r is the radius of the circle (0.5 m).
Substituting the given values into the equation, we have:
Fc = (2 kg * (6 m/s)^2) / 0.5 m
Simplifying the equation further, we get:
Fc = (2 kg * 36 m^2/s^2) / 0.5 m
= (72 kg * m * m/s^2) / 0.5 m
= 144 N
Therefore, the centripetal force of the object is 144 Newtons.
To know more about centripetal force, refer here:
https://brainly.com/question/14021112#
#SPJ11
Simple Harmonic Oscillator. For a CO (carbon monoxide) molecule, assume that the system vibrates at o=4.0.1014 [Hz]. a. Wavefunction: Sketch the wave function for the n=5 state of the SHO. Points will be given on qualitative accuracy of the solution. Include a brief description to help me understand critical components of your sketch and label the sketch appropriately. b. Probabilities: Make a qualitatively correct sketch that indicates the probability of finding the state as a function of interatomic separation for n=5 indicate any important features. (Sketch plus 1 sentence). c. Classical turning points: Calculate the probability that the interatomic distance is outside the classically allowed region for the n=1 state
a. For the n=5 state of the SHO, the wavefunction is a symmetric Gaussian curve centered at the equilibrium position, with decreasing amplitudes as you move away from it.
b. The probability of finding the n=5 state as a function of interatomic separation is depicted as a plot showing a peak at the equilibrium position and decreasing probabilities as you move away from it.
c. The probability of the interatomic distance being outside the classically allowed region for the n=1 state of the SHO is negligible, as the classical turning points are close to the equilibrium position and the probability significantly drops away from it.
a. Wavefunction: The wave function for the n=5 state of the Simple Harmonic Oscillator (SHO) can be represented by a Gaussian-shaped curve centered at the equilibrium position. The amplitude of the curve decreases as you move away from the equilibrium position. The sketch should show a symmetric curve with a maximum at the equilibrium position and decreasing amplitudes as you move towards the extremes.
b. Probabilities: The probability of finding the state as a function of interatomic separation for the n=5 state of the SHO can be depicted as a plot with the probability density on the y-axis and the interatomic separation on the x-axis. The sketch should show a peak at the equilibrium position and decreasing probabilities as you move away from the equilibrium. The important feature to highlight is that the probability distribution extends beyond the equilibrium position, indicating the possibility of finding the molecule at larger interatomic separations.
c. Classical turning points: In the classical description of the Simple Harmonic Oscillator, the turning points occur when the total energy of the system equals the potential energy. For the n=1 state, the probability of the interatomic distance being outside the classically allowed region is negligible. The classical turning points are close to the equilibrium position, and the probability of finding the molecule significantly drops as you move away from the equilibrium.
Learn more about Probability from the link given below.
https://brainly.com/question/31828911
#SPJ4
If you are using a motion encodr receiver to find the veloicty of a cart, how would you find the uncertainty in veloicty?
To find the uncertainty in velocity using a motion encoder receiver, you need to consider the uncertainties in the measurements, collect multiple measurements, calculate the standard deviation, and report the uncertainty as a range around the measured velocity.
To find the uncertainty in velocity when using a motion encoder receiver, you would need to consider the uncertainties associated with the measurements taken by the receiver. Here's how you can do it:
Determine the uncertainties in the measurements: This involves identifying the sources of uncertainty in the motion encoder receiver. It could be due to factors like resolution limitations, noise in the signal, or calibration errors. Consult the manufacturer's specifications or conduct experiments to determine these uncertainties.
Collect multiple measurements: Take several velocity measurements using the motion encoder receiver. It is important to take multiple readings to account for any random variations or errors.
Calculate the standard deviation: Calculate the standard deviation of the collected measurements. This statistical measure quantifies the spread of the data points around the mean. It provides an estimation of the uncertainty in the velocity measurements.
Report the uncertainty: Express the uncertainty as a range around the measured velocity. Typically, uncertainties are reported as a range of values, such as ± standard deviation or ± percentage. This range represents the potential variation in the velocity measurements due to the associated uncertainties.
To find the uncertainty in velocity using a motion encoder receiver, you need to consider the uncertainties in the measurements, collect multiple measurements, calculate the standard deviation, and report the uncertainty as a range around the measured velocity.
To know more about velocity visit:
brainly.com/question/30559316
#SPJ11
Match each description of property of a substance with the most appropriate of the three common states of matter. If the property may apply to more than one state of matter, match it to the choice that lists all states of matter that are appropriate. Some choices may go unused. Hint a ✓ Atoms and molecules in it are significantly attracted to neighboring atoms and molecules. can carry a sound wave takes on the shape of the container retains its own shape and size takes on the size of the container g f a f fis included as "fluids" a. solids b. solids and gases c. liquids d. gases e. solids and liquids f. liquids and gases g. solids, liquids, and gases
Atoms and molecules in it are significantly attracted to neighboring atoms and molecules. - a. solids ,Can carry a sound wave - c. liquids ,Takes on the shape of the container - f. liquids and gases ,Retains its own shape and size - a. solids, Takes on the size of the container - g. solids, liquids, and gases,The property of being a fluid is included as "fluids" - f. liquids and gases
Matching the descriptions with the appropriate states of matter:
Atoms and molecules in it are significantly attracted to neighboring atoms and molecules: a. solids
Can carry a sound wave: c. liquids
Takes on the shape of the container: f. liquids and gases
Retains its own shape and size: a. solids
Takes on the size of the container: g. solids, liquids, and gases
The property of being a fluid is included as "fluids": f. liquids and gases
The descriptions of properties of substances are matched with the most appropriate states of matter as follows:
Solids are characterized by significant attraction between atoms and molecules, retaining their own shape and size.
Liquids can carry a sound wave, take on the shape of the container, and are included in the category of fluids.
Gases take on the size of the container and are also included in the category of fluids.
Solids are characterized by significant attractions between atoms and molecules, and they retain their own shape and size. Liquids can carry sound waves, take on the size of the container, and are included in the category of fluids. Gases take on the shape of the container. Both solids and liquids can take on the size of the container.
To know more about sound wave, visit:
https://brainly.com/question/1173066
#SPJ11
In an RC series circuit, ε = 12.0 V, R = 1.49 MQ, and C= 1.64 F. (a) Calculate the time constant. (b) Find the maximum charge that will appear on the capacitor during charging. (c) How long does it take for the charge to build up to 11.5C? (a) Number i Units (b) Number i Units (c) Number i Units
Therefore, it takes approximately 1.218 × 10⁶ seconds for the charge to build up to 11.5 C.
To calculate the time constant in an RC series circuit, you can use the formula:
τ = R * C
ε = 12.0 V
R = 1.49 MQ (megaohm)
C = 1.64 F (farad)
(a) Calculate the time constant:
τ = R * C
= 1.49 MQ * 1.64 F
τ = (1.49 × 10⁶ Ω) * (1.64 C/V)
= 2.4436 × 10⁶ s (seconds)
Therefore, the time constant is approximately 2.4436 × 10⁶ seconds.
(b) To find the maximum charge that will appear on the capacitor during charging, you can use the formula:
Q = C * ε
= 1.64 F * 12.0 V
= 19.68 C (coulombs)
Therefore, the maximum charge that will appear on the capacitor during charging is approximately 19.68 coulombs.
(c) To calculate the time it takes for the charge to build up to 11.5 C, you can use the formula:
t = -τ * ln(1 - Q/Q_max)
t = - (2.4436 × 10⁶s) * ln(1 - 11.5 C / 19.68 C)
t ≈ - (2.4436 ×10⁶ s) * ln(0.4157)
t ≈ 1.218 × 10^6 s (seconds)
Learn more about series circuit here : brainly.com/question/14997346
#SPJ11
A current circulates around a 2. 10-mm-diameter superconducting ring. What is the ring's magnetic dipole moment? Express your answer in amper-meters squared with the appropriate units. What is the on-axis magnetic field strength 5.10 cm from the ring? Express your answer with the appropriate units.
The magnetic dipole moment of the superconducting ring is 3.48 × 10⁻⁹ I A·m² and the magnetic field strength of the ring is 1.70 × 10⁻⁸ I T.
Given the following values:Diameter (d) = 2.10 mm Radius (r) = d/2
Magnetic Permeability of Free Space = μ = 4π × 10⁻⁷ T·m/A
The magnetic dipole moment (µ) of the superconducting ring can be calculated by the formula:µ = Iπr²where I is the current that circulates around the ring, π is a mathematical constant (approx. 3.14), and r is the radius of the ring.Substituting the known values, we have:µ = Iπ(2.10 × 10⁻³/2)²= 3.48 × 10⁻⁹ I A·m² .
The magnetic field strength (B) of the superconducting ring at a point 5.10 cm from the ring (on its axis) can be calculated using the formula:B = µ/4πr³where r is the distance from the ring to the point where the magnetic field strength is to be calculated.Substituting the known values, we have:B = (3.48 × 10⁻⁹ I)/(4π(5.10 × 10⁻²)³)= 1.70 × 10⁻⁸ I T (answer to second question)
Hence, the magnetic dipole moment of the superconducting ring is 3.48 × 10⁻⁹ I A·m² and the magnetic field strength of the ring is 1.70 × 10⁻⁸ I T.
For further information on Magnetic field strength visit :
https://brainly.com/question/31307493
#SPJ11
Physics
4. Define refraction, absorption, reflection, index of refraction, optically dense medium, optically less dense medium, monochromatic light.
Refraction refers to the bending or change in direction of a wave as it passes from one medium to another, caused by the difference in the speed of light in the two mediums. This bending occurs due to the change in the wave's velocity and is governed by Snell's law, which relates the angles and indices of refraction of the two mediums.
Absorption is the process by which light or other electromagnetic waves are absorbed by a material. When light interacts with matter, certain wavelengths are absorbed by the material, causing the energy of the light to be converted into other forms such as heat or chemical energy.
Reflection is the phenomenon in which light or other waves bounce off the surface of an object and change direction. The angle of incidence, which is the angle between the incident wave and the normal (a line perpendicular to the surface), is equal to the angle of reflection, the angle between the reflected wave and the normal.
Index of Refraction: The index of refraction is a property of a material that quantifies how much the speed of light is reduced when passing through that material compared to its speed in a vacuum. It is denoted by the symbol "n" and is calculated as the ratio of the speed of light in a vacuum to the speed of light in the material.
Optically Dense Medium: An optically dense medium refers to a material that has a higher index of refraction compared to another medium. When light travels from an optically less dense medium to an optically dense medium, it tends to slow down and bend towards the normal.
Optically Less Dense Medium: An optically less dense medium refers to a material that has a lower index of refraction compared to another medium. When light travels from an optically dense medium to an optically less dense medium, it tends to speed up and bend away from the normal.
Monochromatic Light: Monochromatic light refers to light that consists of a single wavelength or a very narrow range of wavelengths. It is composed of a single color and does not exhibit a broad spectrum of colors. Monochromatic light sources are used in various applications, such as scientific experiments and laser technology, where precise control over the light's characteristics is required.
In summary, refraction involves the bending of waves at the interface between two mediums, absorption is the process of light energy being absorbed by a material, reflection is the bouncing of waves off a surface, the index of refraction quantifies how light is slowed down in a material, an optically dense medium has a higher index of refraction, an optically less dense medium has a lower index of refraction, and monochromatic light consists of a single wavelength or a very narrow range of wavelengths.
Learn more about refraction here:
https://brainly.com/question/14760207
#SPJ11
The Hamiltonian for a two-particle system is given by H = w(L12 + L22) + L₁ L₁. L2 ħ + w/h L₁, L2 denote the angular momentum of each particle. (a) Find the energy eigenvalues and the corresponding eigenstates. (b) The system is prepared to have l₁ = 1, l₂ = 2, m₁ = 0 and m₂ = 1. Find all the energy eigenvalues it can have and also find the probability to measure each energy eigenvalue.
The value is:
(a) The energy eigenvalues of the two-particle system are given by E = 2w(l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1)), where l₁, l₂, and l₃ are the quantum numbers associated with the angular momentum of each particle.
(b) For the specific case of l₁ = 1, l₂ = 2, m₁ = 0, and m₂ = 1, the possible energy eigenvalues are E = 12w, E = 8w, and E = 4w, corresponding to l₃ = 1, l₃ = 2, and l₃ = 3, respectively.
To find the energy eigenvalues and corresponding eigenstates, we need to solve the Schrödinger equation for the given Hamiltonian.
(a) Energy Eigenvalues and Eigenstates:
The Hamiltonian for the two-particle system is given by:
H = w(L₁² + L₂²) + (L₁ . L₂) ħ + (w/ħ) L₁ . L₂
To find the energy eigenvalues and eigenstates, we need to solve the Schrödinger equation:
H |ψ⟩ = E |ψ⟩
Let's assume that the eigenstate can be expressed as a product of individual angular momentum eigenstates:
|ψ⟩ = |l₁, m₁⟩ ⊗ |l₂, m₂⟩
where |l₁, m₁⟩ represents the eigenstate of the angular momentum of particle 1 and |l₂, m₂⟩ represents the eigenstate of the angular momentum of particle 2.
Substituting the eigenstate into the Schrödinger equation, we get:
H |l₁, m₁⟩ ⊗ |l₂, m₂⟩ = E |l₁, m₁⟩ ⊗ |l₂, m₂⟩
Expanding the Hamiltonian, we have:
H = w(L₁² + L₂²) + (L₁ . L₂) ħ + (w/ħ) L₁ . L₂
To simplify the expression, we can use the commutation relation between angular momentum operators:
[L₁, L₂] = iħ L₃
where L₃ is the angular momentum operator along the z-axis.
Using this relation, we can rewrite the Hamiltonian as:
H = w(L₁² + L₂²) + (L₁ . L₂) ħ + (w/ħ) L₁ . L₂
= w(L₁² + L₂²) + (L₁ . L₂) ħ + (w/ħ) (1/2)(L₁² + L₂² - L₃² - ħ²)
Substituting the eigenstates into the Schrödinger equation and applying the Hamiltonian, we get:
E |l₁, m₁⟩ ⊗ |l₂, m₂⟩ = w(l₁(l₁+1) + l₂(l₂+1) + (l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1) - 1/4) + w(l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1) - 1/4)) ħ² |l₁, m₁⟩ ⊗ |l₂, m₂⟩
Simplifying the equation, we obtain:
E = 2w(l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1))
The energy eigenvalues depend on the quantum numbers l₁, l₂, and l₃.
(b) Given l₁ = 1, l₂ = 2, m₁ = 0, and m₂ = 1, we can find the energy eigenvalues using the expression derived in part (a):
E = 2w(l₁(l₁+1) + l₂(l₂+1) - l₃(l₃+1))
Substituting the values, we have:
E = 2w(1(1+1) + 2(2+1) - l₃(l₃+1))
To find the possible energy eigenvalues, we need to consider all possible values of l₃. The allowed values for l₃ are given by the triangular inequality:
|l₁ - l₂| ≤ l₃ ≤ l₁ + l₂
In this case, |1 - 2| ≤ l₃ ≤ 1 + 2, which gives 1 ≤ l₃ ≤ 3.
Therefore, the possible energy eigenvalues for this system are obtained by substituting different values of l₃:
For l₃ = 1:
E = 2w(1(1+1) + 2(2+1) - 1(1+1))
= 2w(6) = 12w
For l₃ = 2:
E = 2w(1(1+1) + 2(2+1) - 2(2+1))
= 2w(4) = 8w
For l₃ = 3:
E = 2w(1(1+1) + 2(2+1) - 3(3+1))
= 2w(2) = 4w
To know more about energy:
https://brainly.com/question/1932868
#SPJ11
Two equal charges of magnitude 1.8 x 10-7C experience an electrostatic force of 4.5 x 10-4 N. How far apart are the centers of the two charges?
The distance between the centers of the two charges is 5.4 x 10⁻³ m.
Two equal charges of magnitude q = 1.8 x 10⁻⁷ C experience an electrostatic force F = 4.5 x 10⁻⁴ N.
To find, The distance between two charges.
The electrostatic force between two charges q1 and q2 separated by a distance r is given by Coulomb's law as:
F = (1/4πε₀) (q1q2/r²)
Where,ε₀ is the permittivity of free space,ε₀ = 8.85 x 10⁻¹² C² N⁻¹ m⁻².
Substituting the given values in the Coulomb's law
F = (1/4πε₀) (q1q2/r²)⇒ r² = (1/4πε₀) (q1q2/F)⇒ r = √[(1/4πε₀) (q1q2/F)]
The distance between the centers of the two charges is obtained by multiplying the distance between the two charges by 2 since each charge is at the edge of the circle.
So, Distance between centers of the charges = 2r
Here, q1 = q2 = 1.8 x 10⁻⁷ C andF = 4.5 x 10⁻⁴ Nε₀ = 8.85 x 10⁻¹² C² N⁻¹ m⁻²
Now,The distance between two charges, r = √[(1/4πε₀) (q1q2/F)]= √[(1/4π x 8.85 x 10⁻¹² x 1.8 x 10⁻⁷ x 1.8 x 10⁻⁷)/(4.5 x 10⁻⁴)] = 2.7 x 10⁻³ m
Therefore,The distance between centers of the charges = 2r = 2 x 2.7 x 10⁻³ m = 5.4 x 10⁻³ m.
Hence, The distance between the centers of the two charges is 5.4 x 10⁻³ m.
Learn more about magnitude at: https://brainly.com/question/30337362
#SPJ11
Question 21 () a) wider fringes will be formed by decreasing the width of the slits. increasing the distance between the slits. increasing the width of the slits. decreasing the distance between the slits. Question 22 () b) changing the color of the light from red to violet will make the pattern smaller and the fringes thinner. make the pattern larger and the fringes thicker. make the pattern larger and the fringes thinner. make the pattern smaller and the fringes thicker.
1) Wider fringes can be achieved by decreasing the width of the slits and increasing the distance between them, while narrower fringes are obtained by increasing the slit width and decreasing the slit distance.
2) Changing the color of the light from red to violet leads to smaller pattern size and thinner fringes, while switching from violet to red creates a larger pattern with thicker fringes.
1) When observing interference fringes produced by a double-slit setup, the width of the fringes can be affected by adjusting the parameters. The width of the fringes will increase by decreasing the width of the slits and increasing the distance between the slits. Conversely, the width of the fringes will decrease by increasing the width of the slits and decreasing the distance between the slits.
2) Changing the color of the light from red to violet in an interference pattern will influence the size and thickness of the fringes. Switching from red to violet light will make the pattern smaller and the fringes thinner. Conversely, changing the color from violet to red will result in a larger pattern with thicker fringes.
Learn more about fringes from the given link!
https://brainly.com/question/29487127
#SPJ11
If the charge is -33_ μC, the speed is 1500_m/s, the strength of the magnetic field is 1_T, and the angle is 150∘, then find the force (magnitude and direction) on the charge. 2. magnitude A. 0.01548_N D. 0.02896_N B. 0.02475 N E. 0.03607 N C. 0.02817_N F. 0.02976_N 3. direction A. Left B. Into the paper C. Right D. Out of the paper
Given the charge, speed, magnetic field strength, and angle, we can calculate the force on the charge using the equation F = q * v * B * sin(θ). The magnitude of the force is 0.02896 N, and the direction is out of the paper.
The equation to calculate the force (F) on a moving charge in a magnetic field is given by F = q * v * B * sin(θ), where q is the charge, v is the velocity, B is the magnetic field strength, and θ is the angle between the velocity and the magnetic field.
Given:
Charge (q) = -33 μC = -33 × 10^-6 C
Speed (v) = 1500 m/s
Magnetic field strength (B) = 1 T
Angle (θ) = 150°
First, we need to convert the charge from microcoulombs to coulombs:
q = -33 × 10^-6 C
Now we can substitute the given values into the equation to calculate the force:
F = q * v * B * sin(θ)
= (-33 × 10^-6 C) * (1500 m/s) * (1 T) * sin(150°)
≈ 0.02896 N
Therefore, the magnitude of the force on the charge is approximately 0.02896 N.
To determine the direction of the force, we need to consider the right-hand rule. When the charge moves with a velocity (v) at an angle of 150° to the magnetic field (B) pointing into the paper, the force will be directed out of the paper.
Hence, the direction of the force on the charge is out of the paper.
To learn more about charge click here brainly.com/question/13871705
#SPJ11
A cylinder of radius 10 cm has a thread wrapped around its edge. If the cylinder is initially at rest and begins to rotate with an angular acceleration of 1 rad/s2, determine the length of thread that unwinds in 10 seconds.
Given
,Radius of cylinder
= r = 10 cm = 0.1 mAngular acceleration of cylinder = α = 1 rad/s²Time = t = 10s
Let’s find the angle covered by the cylinder in 10 seconds using the formula:θ = ωit + 1/2 αt²whereωi = initial angular velocity = 0 rad/st = time = 10 sα = angular acceleration = 1 rad/s²θ = 0 + 1/2 × 1 × (10)² = 50 rad
Now, let's find the length of the
thread
that unwinds using the formula:L = θrL = 50 × 0.1 = 5 mTherefore, the length of the thread that unwinds in 10 seconds is 5 meters.
Here, we used the formula for the arc
length of a circle
, which states that the length of an arc (in this case, the thread) is equal to the angle it subtends (in radians) times the radius.
to know more about
,Radius of cylinder
pls visit-
https://brainly.com/question/6499996
#SPJ11
beginning with h=4.136x10-15 eV.s and c = 2.998x108 m/s , show that hc =1240 eV-nm.
Beginning with h=4.136x10-15 eV.s and c = 2.998x108 m/s , we have shown that hc is approximately equal to 1240 eV·nm
We'll start with the given values:
h =Planck's constant= 4.136 x 10^(-15) eV·s
c = speed of light= 2.998 x 10^8 m/s
We want to show that hc = 1240 eV·nm.
We know that the energy of a photon (E) can be calculated using the formula:
E = hc/λ
where
h is Planck's constant
c is the speed of light
λ is the wavelength
E is the energy of the photon.
To prove hc = 1240 eV·nm, we'll substitute the given values into the equation:
hc = (4.136 x 10^(-15) eV·s) ×(2.998 x 10^8 m/s)
Let's multiply these values:
hc ≈ 1.241 x 10^(-6) eV·m
Now, we want to convert this value from eV·m to eV·nm. Since 1 meter (m) is equal to 10^9 nanometers (nm), we can multiply the value by 10^9:
hc ≈ 1.241 x 10^(-6) eV·m × (10^9 nm/1 m)
hc ≈ 1.241 x 10^3 eV·nm
Therefore, we have shown that hc is approximately equal to 1240 eV·nm
To learn more about Planck's constant visit: https://brainly.com/question/28060145
#SPJ11
Determine the number of electrons, protons, and neutrons in
argon
3818Ar
.
HINT
(a)
electrons
(b)
protons
(c)
neutrons
The number of electrons in Argon is 18, the number of protons is 18, and the number of neutrons is 20.
Now, let's proceed to the second part of the question. Here's how to determine the number of electrons, protons, and neutrons in Argon 38 :18 Ar :Since the atomic number of Argon is 18, it has 18 protons in its nucleus, which is also equal to its atomic number.
Since Argon is neutral, it has 18 electrons orbiting around its nucleus.In order to determine the number of neutrons, we have to subtract the number of protons from the atomic mass. In this case, the atomic mass of Argon is 38.
Therefore: Number of neutrons = Atomic mass - Number of protons Number of neutrons = 38 - 18 Number of neutrons = 20 Therefore, the number of electrons in Argon is 18, the number of protons is 18, and the number of neutrons is 20
Know more about electrons here:
https://brainly.com/question/12001116
#SPJ11
Q/C S A glider of mass m is free to slide along a horizontal air track. It is pushed against a launcher at one end of the track. Model the launcher as a light spring of force constant k compressed by a distance x. The glider is released from rest. (c) Is more work done on a cart with a large or a small mass?
More work is done on a cart with a small mass. This relationship arises from the work-energy principle, which states that the work done on an object is equal to the change in its kinetic energy.
To understand why more work is done on a cart with a small mass, let's consider the work-energy principle. According to this principle, the work done on an object is equal to the change in its kinetic energy.
In this scenario, when the glider is released from rest, the compressed spring exerts a force on the glider, accelerating it along the air track. The work done by the spring force is given by the formula:
Work = (1/2) kx²
where k is the force constant of the spring and x is the distance the spring is compressed.
Now, the change in kinetic energy of the glider can be calculated using the formula:
ΔKE = (1/2) mv²
where m is the mass of the glider and v is its final velocity.
From the work-energy principle, we can equate the work done by the spring force to the change in kinetic energy:
(1/2) kx² = (1/2) mv²
Since the initial velocity of the glider is zero, the final velocity v is equal to the square root of (2kx²/m).
Now, let's consider the situation where we have two gliders with different masses, m₁ and m₂, and the same spring constant k and compression x. Using the above equation, we can see that the final velocity of the glider is inversely proportional to the square root of its mass:
v ∝ 1/√m
As a result, a glider with a smaller mass will have a larger final velocity compared to a glider with a larger mass. This indicates that more work is done on the cart with a smaller mass since it achieves a greater change in kinetic energy.
More work is done on a cart with a small mass compared to a cart with a large mass. This is because, in the given scenario, the final velocity of the glider is inversely proportional to the square root of its mass. Therefore, a glider with a smaller mass will experience a larger change in kinetic energy and, consequently, more work will be done on it.
This relationship arises from the work-energy principle, which states that the work done on an object is equal to the change in its kinetic energy. Understanding this concept helps in analyzing the energy transfer and mechanical behavior of objects in systems involving springs and masses.
To know more about kinetic energy ,visit:
https://brainly.com/question/8101588
#SPJ11
Susan's 10.0 kg baby brother Paul sits on a mat. Susan pulls the mat across the floor using a rope that is angled 30∘ above the floor. The tension is a constant 31.0 N and the coefficient of friction is 0.210.
Use work and energy to find Paul's speed after being pulled 2.90 m .
Paul's speed after being pulled at distance of 2.90 m is approximately 2.11 m/s
Mass of Paul (m) = 10.0 kg
Angle of the rope (θ) = 30°
Tension force (T) = 31.0 N
Coefficient of friction (μ) = 0.210
Distance pulled (d) = 2.90 m
First, let's calculate the work done by the tension force:
Work done by tension force (Wt) = T * d * cos(θ)
Wt = 31.0 N * 2.90 m * cos(30°)
Wt = 79.741 J
Next, let's calculate the work done by friction:
Work done by friction (Wf) = μ * m * g * d
where g is the acceleration due to gravity (approximately 9.8 m/s²)
Wf = 0.210 * 10.0 kg * 9.8 m/s² * 2.90 m
Wf = 57.471 J
The net work done on Paul is the difference between the work done by the tension force and the work done by friction:
Net work done (Wnet) = Wt - Wf
Wnet = 79.741 J - 57.471 J
Wnet = 22.270 J
According to the work-energy principle, the change in kinetic energy (ΔKE) is equal to the net work done:
ΔKE = Wnet
ΔKE = 22.270 J
Since Paul starts from rest, his initial kinetic energy is zero (KE_initial = 0). Therefore, the final kinetic energy (KE_final) is equal to the change in kinetic energy:
KE_final = ΔKE = 22.270 J
We can use the kinetic energy formula to find Paul's final speed (v):
KE_final = 0.5 * m * v²
22.270 J = 0.5 * 10.0 kg * v²
22.270 J = 5.0 kg * v²
Dividing both sides by 5.0 kg:
v² = 4.454
Taking the square root of both sides:
v ≈ 2.11 m/s
Therefore, Paul's speed after being pulled at a distance of 2.90 m is approximately 2.11 m/s.
Learn more about tension force:
https://brainly.com/question/30343908
#SPJ11
Question 14 1 points A 865 kg car traveling east collides with a 2.241 kg truck traveling west at 24.8 ms. The car and the truck stick together after the colision. The wreckage moves west at speed of 903 m/s What is the speed of the car in (n)? (Write your answer using 3 significant figures
The speed of the car is given by the absolute value of its velocity, so the speed of the car is approximately 906 m/s (rounded to three significant figures).
Let's denote the initial velocity of the car as V_car and the initial velocity of the truck as V_truck. Since the car is traveling east and the truck is traveling west, we assign a negative sign to the truck's velocity.
The total momentum before the collision is given by:
Total momentum before = (mass of car * V_car) + (mass of truck * V_truck)
After the collision, the car and the truck stick together, so they have the same velocity. Let's denote this velocity as V_wreckage.
The total momentum after the collision is given by:
Total momentum after = (mass of car + mass of truck) * V_wreckage
According to the conservation of momentum, these two quantities should be equal:
(mass of car * V_car) + (mass of truck * V_truck) = (mass of car + mass of truck) * V_wreckage
Let's substitute the given values into the equation and solve for V_car:
(865 kg * V_car) + (2.241 kg * (-24.8 m/s)) = (865 kg + 2.241 kg) * (-903 m/s)
Simplifying the equation: 865V_car - 55.582m/s = 867.241 kg * (-903 m/s)
865V_car = -783,182.823 kg·m/s + 55.582 kg·m/s
865V_car = -783,127.241 kg·m/s
V_car = -783,127.241 kg·m/s / 865 kg
V_car ≈ -905.708 m/s
The speed of the car is given by the absolute value of its velocity, so the speed of the car is approximately 906 m/s (rounded to three significant figures).
To learn more about velocity:
https://brainly.com/question/18084516
#SPJ11