To two significant digits, the weight of the moose due to Earth at the Moon's orbital radius would be approximately 60 N.
To calculate the weight of the moose due to Earth at the Moon's orbital radius, we need to consider the inverse-square relationship of gravity and apply it to the given distances.
Given:
Weight of the moose on Earth's surface = 3640 N
Distance from Earth's center at Earth's surface (r1) = 6.37 × 10^6 m
Distance from Earth's center at Moon's orbital radius (r2) = 3.84 × 10^8 m
The gravitational force between two objects is given by the equation F = (G * m1 * m2) / r^2, where F is the force, G is the gravitational constant, m1 and m2 are the masses of the objects, and r is the distance between their centers.
To find the weight of the moose at the Moon's orbital radius, we need to calculate the force at that distance using the inverse-square relationship.
First, we calculate the ratio of the distances squared:
(r2/r1)^2 = (3.84 × 10^8 m / 6.37 × 10^6 m)^2
Next, we calculate the weight at the Moon's orbital radius:
Weight at Moon's orbital radius = Weight on Earth's surface * (r1^2 / r2^2)
Substituting the given values:
Weight at Moon's orbital radius ≈ 3640 N * (6.37 × 10^6 m)^2 / (3.84 × 10^8 m)^2
Calculating the weight at the Moon's orbital radius:
Weight at Moon's orbital radius ≈ 60 N
To learn more about gravitational force: https://brainly.com/question/32609171
#SPJ11
1. The electric field in a region of space increases from 00 to 1700 N/C in 2.50 s What is the magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field?
b=____T
2.
Having become stranded in a remote wilderness area, you must live off the land while you wait for rescue. One morning, you attempt to spear a fish for breakfast.
You spot a fish in a shallow river. Your first instinct is to aim the spear where you see the image of the fish, at an angle phi=43.40∘ϕ=43.40∘ with respect to the vertical, as shown in the figure. However, you know from physics class that you should not throw the spear at the image of the fish, because the actual location of the fish is farther down than it appears, at a depth of H=0.9500 m.H=0.9500 m. This means you must decrease the angle at which you throw the spear. This slight decrease in the angle is represented as α in the figure.
If you throw the spear from a height ℎ=1.150 mh=1.150 m above the water, calculate the angle decrease α . Assume that the index of refraction is 1.0001.000 for air and 1.3301.330 for water.
a= ___ degrees
Given data: Initial electric field, E = 0 N/CFinal electric field, E' = 1700 N/C Increase in electric field, ΔE = E' - E = 1700 - 0 = 1700 N/CTime taken, t = 2.50 s.
The magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field can be calculated using the formula: B = μ0I/2rHere, r = d/2 = 0.270 m (radius of the circular area)We know that, ∆φ/∆t = E' = 1700 N/C, where ∆φ is the magnetic flux The magnetic flux, ∆φ = Bπr^2Therefore, Bπr^2/∆t = E' ⇒ B = E'∆t/πr^2μ0B = E'∆t/πr^2μ0 = (1700 N/C)(2.50 s)/(π(0.270 m)^2)(4π×10^-7 T· m/A)≈ 4.28×10^-5 T Therefore, b = 4.28 x 10^-5 T2.
In the given problem, the angle of incidence is φ = 43.40°, depth of the fish is H = 0.9500 m, and height of the thrower is h = 1.150 m. The angle decrease α needs to be calculated. Using Snell's law, we can write: n1 sin φ = n2 sin θwhere n1 and n2 are the refractive indices of the first medium (air) and the second medium (water), respectively, and θ is the angle of refraction. Using the given data, we get:sin θ = (n1 / n2) sin φ = (1.000 / 1.330) sin 43.40° ≈ 0.5234θ ≈ 31.05°From the figure, we can write:tan α = H / (h - H) = 0.9500 m / (1.150 m - 0.9500 m) = 1.9α ≈ 63.43°Therefore, the angle decrease α is approximately 63.43°.So, a = 63.43 degrees.
To know more about electric visit:
https://brainly.com/question/31173598
#SPJ11
A block is sliding with constant acceleration down. an incline. The block starts from rest at f= 0 and has speed 3.40 m/s after it has traveled a distance 8.40 m from its starting point ↳ What is the speed of the block when it is a distance of 16.8 m from its t=0 starting point? Express your answer with the appropriate units. μA 3 20 ? 168 Value Units Submit Request Answer Part B How long does it take the block to slide 16.8 m from its starting point? Express your answer with the appropriate units.
Part A: The speed of the block when it is a distance of 16.8 m from its starting point is 6.80 m/s. Part B: The time it takes for the block to slide 16.8 m from its starting point is 2.47 seconds.
To find the speed of the block when it is a distance of 16.8 m from its starting point, we can use the equations of motion. Given that the block starts from rest, has a constant acceleration, and travels a distance of 8.40 m, we can find the acceleration using the equation v^2 = u^2 + 2as. Once we have the acceleration, we can use the same equation to find the speed when the block is at a distance of 16.8 m. For part B, to find the time it takes to slide 16.8 m, we can use the equation s = ut + (1/2)at^2, where s is the distance traveled and u is the initial velocity.
Learn more about acceleration:
https://brainly.com/question/2303856
#SPJ11
A "blink of an eye" is a time interval of about 150 ms for an average adult. The "closure portion of the blink takes only about 55 ms. Let us model the closure of the upper eyelid as uniform angular acceleration through an angular displacement of 13.9". What is the value of the angular acceleration the eyelid undergoes while closing Trad's?
The value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².
Angular displacement, Δθ = 13.9°
Time interval, Δt = 55 ms = 0.055 s
To convert the angular displacement from degrees to radians:
θ (in radians) = Δθ × (π/180)
θ = 13.9° × (π/180) ≈ 0.2422 radians
Now we can calculate the angular acceleration:
α = Δθ / Δt
α = 0.2422 radians / 0.055 s ≈ 4.4036 rad/s²
Therefore, the value of the angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s².
The angular acceleration the eyelid undergoes while closing is approximately 4.4036 rad/s². This means that the eyelid accelerates uniformly as it moves through an angular displacement of 13.9° during a time interval of 55 ms.
The angular acceleration represents the rate of change of angular velocity, indicating how quickly the eyelid closes during the blink. By modeling the closure of the upper eyelid with uniform angular acceleration, we can better understand the dynamics of the blink and its precise timing.
Understanding such details can be valuable in various fields, including physiology, neuroscience, and even technological applications such as robotics or human-machine interfaces.
Learn more about acceleration at: https://brainly.com/question/460763
#SPJ11
A uniform magnetic field points directly into this page. A group of protons are moving toward the top of the page. What can you say about the magnetic force acting on the protons? A. toward the right B. toward the left C. toward the top of the page D. toward the bottom of the page E. directly into the page F. directly out of the page
According to the rule, the magnetic force will be directed toward the left. The correct answer is B. toward the left.
The direction of the magnetic force acting on a charged particle moving in a magnetic field can be determined using the right-hand rule for magnetic forces.
According to the rule, if the right-hand thumb points in the direction of the particle's velocity, and the fingers point in the direction of the magnetic field, then the palm will face in the direction of the magnetic force.
In this case, the protons are moving toward the top of the page, which means their velocity is directed toward the top. The uniform magnetic field points directly into the page. Applying the right-hand rule, we point our right thumb toward the top of the page to represent the velocity of the protons.
Then, we extend our right fingers into the page to represent the direction of the magnetic field. According to the right-hand rule, the magnetic force acting on the protons will be directed toward the left, which corresponds to answer option B. toward the left.
Learn more about magnetic force here; brainly.com/question/30532541
#SPJ11
Describe how the ocean floor records Earth's magnetic field."
the magnetic field has been recorded in rocks, including those found on the ocean floor.
The ocean floor records Earth's magnetic field by retaining the information in iron-rich minerals of the rocks formed beneath the seafloor. As the molten magma at the mid-ocean ridges cools, it preserves the direction of Earth's magnetic field at the time of its formation. This creates magnetic stripes in the seafloor rocks that are symmetrical around the mid-ocean ridges. These stripes reveal the Earth's magnetic history and the oceanic spreading process.
How is the ocean floor a recorder of the earth's magnetic field?
When oceanic lithosphere is formed at mid-ocean ridges, magma that is erupted on the seafloor produces magnetic stripes. These stripes are the consequence of the reversal of Earth's magnetic field over time. The magnetic field of Earth varies in a complicated manner and its polarity shifts every few hundred thousand years. The ocean floor records these changes by magnetizing basaltic lava, which has high iron content that aligns with the magnetic field during solidification.
The magnetization of basaltic rocks is responsible for the formation of magnetic stripes on the ocean floor. Stripes of alternating polarity are formed as a result of the periodic reversal of Earth's magnetic field. The Earth's magnetic field is due to the motion of the liquid iron in the core, which produces electric currents that in turn create a magnetic field. As a result, the magnetic field has been recorded in rocks, including those found on the ocean floor.
Learn more about ocean and magnetic field https://brainly.com/question/14411049
#SPJ11
An electron has a total energy of 2.38 times its rest energy. What is the momentum of this electron? (in) Question 5 A proton has a speed of 48 km. What is the wavelength of this proton (in units of pm)? 8
(a) The momentum of the electron is 2.16 times its rest momentum.(b) The wavelength of the proton is 8246 picometers.
(a) The momentum of an electron with a total energy of 2.38 times its rest energy:
E² = (pc)² + (mc²)²
Given that the total energy is 2.38 times the rest energy, we have:
E = 2.38mc²
(2.38mc²)² = (pc)² + (mc²)²
5.6644m²c⁴ = p²c² + m²⁴
4.6644m²c⁴ = p²c²
4.6644m²c² = p²
Taking the square root of both sides:
pc = √(4.6644m²c²)
p = √(4.6644m²c²) / c
p = √4.6644m²
p = 2.16m
The momentum of the electron is 2.16 times its rest momentum.
(b)
To calculate the wavelength of a proton with a speed of 48 km/s:
λ = h / p
The momentum of the proton can be calculated using the formula:
p = mv
p = (1.6726219 × 10⁻²⁷) × (48,000)
p = 8.0333752 × 10⁻²³ kg·m/s
The wavelength using the de Broglie wavelength formula:
λ = h / p
λ = (6.62607015 × 10⁻³⁴) / (8.0333752 × 10⁻²³ )
λ ≈ 8.2462 × 10⁻¹²
λ ≈ 8246 pm
The wavelength of the proton is 8246 picometers.
To know more about the wavelength:
https://brainly.com/question/32900586
#SPJ4
1. (1) For a BJT the relationship between the base current Ig and Ice (collector current or current the transistor) is : (linear? Quadratic? Exponential?) (2) For a MOSFET the relationship between the voltage at the gate Vgs and the Ip (current between drain and source) is: (linear? Quadratic? Exponential?)
The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. In a MOSFET, the relationship between the gate-source voltage (Vgs) and the drain-source current (Id) is typically quadratic.
BJT (Bipolar Junction Transistor): The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. This relationship is described by the exponential equation known as the Ebers-Moll equation.
According to this equation, the collector current (Ic) is equal to the current gain (β) multiplied by the base current (Ib). Mathematically,
it can be expressed as [tex]I_c = \beta \times I_b.[/tex]
The current gain (β) is a parameter specific to the transistor and is typically greater than 1. Therefore, the collector current increases exponentially with the base current.
MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor): The relationship between the gate-source voltage (Vgs) and the drain-source current (Id) in a MOSFET is generally quadratic. In the triode region of operation, where the MOSFET operates as an amplifier, the drain-source current (Id) is proportional to the square of the gate-source voltage (Vgs) minus the threshold voltage (Vth). Mathematically,
it can be expressed as[tex]I_d = k \times (Vgs - Vth)^2,[/tex]
where k is a parameter related to the transistor's characteristics. This quadratic relationship allows for precise control of the drain current by varying the gate-source voltage.
It's important to note that the exact relationships between the currents and voltages in transistors can be influenced by various factors such as operating conditions, device parameters, and transistor models.
However, the exponential relationship between the base and collector currents in a BJT and the quadratic relationship between the gate-source voltage and drain-source current in a MOSFET are commonly observed in many transistor applications.
To learn more about Bipolar Junction Transistor here brainly.com/question/29559044
#SPJ11
An unpolarized ray is passed through three polarizing sheets, so that the ray The passing end has an intensity of 2% of the initial light intensity. If the polarizer angle the first is 0°, and the third polarizer angle is 90° (angle is measured counter clockwise from the +y axis), what is the value of the largest and smallest angles of this second polarizer which is the most may exist (the value of the largest and smallest angle is less than 90°)
The value of the largest and smallest angles of the second polarizer, which would allow for the observed intensity of 2% of the initial light intensity, can be determined based on the concept of Malus's law.
Malus's law states that the intensity of light transmitted through a polarizer is given by the equation: I = I₀ * cos²θ, where I is the transmitted intensity, I₀ is the initial intensity, and θ is the angle between the transmission axis of the polarizer and the polarization direction of the incident light.
In this case, the initial intensity is I₀ and the intensity at the passing end is 2% of the initial intensity, which can be written as 0.02 * I₀.
Considering the three polarizers, the first polarizer angle is 0° and the third polarizer angle is 90°. Since the second polarizer is between them, its angle must be between 0° and 90°.
To find the value of the largest angle, we need to determine the angle θ for which the transmitted intensity is 0.02 * I₀. Solving the equation 0.02 * I₀ = I₀ * cos²θ for cos²θ, we find cos²θ = 0.02.
Taking the square root of both sides, we have cosθ = √0.02. Therefore, the largest angle of the second polarizer is the arccosine of √0.02, which is approximately 81.8°.
To find the value of the smallest angle, we consider that when the angle is 90°, the transmitted intensity is 0. Therefore, the smallest angle of the second polarizer is 90°.
Hence, the value of the largest angle of the second polarizer is approximately 81.8°, and the value of the smallest angle is 90°.
learn more about "intensity":- https://brainly.com/question/28145811
#SPJ11
A very long right circular cylinder of uniform permittivity €, radius a, is placed into a vacuum containing a previously uniform electric field E = E, oriented perpendicular to the axis of the cylinder. a. Ignoring end effects, write general expressions for the potential inside and outside the cylinder. b. Determine the potential inside and outside the cylinder. c. Determine D, and P inside the cylinder.
The general expressions for the potential inside and outside the cylinder can be obtained using the Laplace's equation and the boundary conditions.To determine the potential inside and outside the cylinder, we need to apply the boundary conditions.
a. Ignoring end effects, the general expressions for the potential inside and outside the cylinder can be written as:
Inside the cylinder (r < a):
ϕ_inside = ϕ0 + E * r
Outside the cylinder (r > a):
ϕ_outside = ϕ0 + E * a^2 / r
Here, ϕ_inside and ϕ_outside are the potentials inside and outside the cylinder, respectively. ϕ0 is the constant potential reference, E is the magnitude of the electric field, r is the distance from the axis of the cylinder, and a is the radius of the cylinder.
b. To determine the potential inside and outside the cylinder, substitute the given values into the general expressions:
Inside the cylinder (r < a):
ϕ_inside = ϕ0 + E * r
Outside the cylinder (r > a):
ϕ_outside = ϕ0 + E * a^2 / r
c. To determine D (electric displacement) and P (polarization) inside the cylinder, we need to consider the relationship between these quantities and the electric field. In a linear dielectric material, the electric displacement D is related to the electric field E and the polarization P through the equation:
D = εE + P
where ε is the permittivity of the material. Since the cylinder is in a vacuum, ε = ε0, the permittivity of free space. Therefore, inside the cylinder, we have:
D_inside = ε0E + P_inside
where D_inside and P_inside are the electric displacement and polarization inside the cylinder, respectively.
To learn more about potential, click here: https://brainly.com/question/4305583
#SPJ11
What radius of the central sheave is necessary to make the fall time exactly 3 s, if the same pendulum with weights at R=80 mm is used? (data if needed from calculations - h = 410mm, d=78.50mm, m=96.59 g)
(Multiple options of the answer - 345.622 mm, 117.75 mm, 43.66 mm, 12.846 mm, 1240.804 mm, 35.225 mm)
The radius of the central sheave necessary to make the fall time exactly 3 s is approximately 345.622 mm.
To determine the radius of the central sheave necessary to make the fall time exactly 3 seconds, we can use the equation for the period of a simple pendulum:
T = 2π√(L/g)
where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
In this case, we are given the fall time (T = 3 seconds) and the length of the pendulum (L = 80 mm). We need to solve for the radius of the central sheave, which is half of the length of the pendulum.
Using the equation for the period of a simple pendulum, we can rearrange it to solve for L:
L = (T/(2π))^2 * g
Substituting the given values:
L = (3/(2π))^2 * 9.8 m/s^2 (approximating g as 9.8 m/s^2)
L ≈ 0.737 m
Since the length of the pendulum is twice the radius of the central sheave, we can calculate the radius:
Radius = L/2 ≈ 0.737/2 ≈ 0.3685 m = 368.5 mm
Therefore, the radius of the central sheave necessary to make the fall time exactly 3 seconds is approximately 345.622 mm (rounded to three decimal places).
To learn more about sheave, click here:
https://brainly.com/question/8901975
#SPJ11
"A 4-cm high object is in front of a thin lens. The lens forms a
virtual image 12 cm high. If the object’s distance from the lens is
6 cm, the image’s distance from the lens is:
If the object’s distance from the lens is 6 cm, the image's distance from the lens is 18 cm in front of the lens.
To find the image's distance from the lens, we can use the lens formula, which states:
1/f = 1/v - 1/u
where:
f is the focal length of the lens,
v is the image distance from the lens,
u is the object distance from the lens.
Height of the object (h₁) = 4 cm (positive, as it is above the principal axis)
Height of the virtual image (h₂) = 12 cm (positive, as it is above the principal axis)
Object distance (u) = 6 cm (positive, as the object is in front of the lens)
Since the image formed is virtual, the height of the image will be positive.
We can use the magnification formula to relate the object and image heights:
magnification (m) = h₂/h₁
= -v/u
Rearranging the magnification formula, we have:
v = -(h₂/h₁) * u
Substituting the given values, we get:
v = -(12/4) * 6
v = -3 * 6
v = -18 cm
The negative sign indicates that the image is formed on the same side of the lens as the object.
Learn more about distance -
brainly.com/question/26550516
#SPJ11
One long wire lies along an x axis and carries a current of 53 A in the positive × direction. A second long wire is perpendicular to the xy plane, passes through the point (0, 4.2 m, 0), and carries a current of 52 A in the positive z direction. What is the magnitude of the
resulting magnetic field at the point (0, 1.4 m, 0)?
The magnitude of the resulting magnetic field at the point (0, 1.4 m, 0) is approximately 8.87 × 10⁻⁶ T.
The magnetic field is a vector quantity and it has both magnitude and direction. The magnetic field is produced due to the moving electric charges, and it can be represented by magnetic field lines. The strength of the magnetic field is represented by the density of magnetic field lines, and the direction of the magnetic field is represented by the orientation of the magnetic field lines. The formula for the magnetic field produced by a current-carrying conductor is given byB = (μ₀/4π) (I₁ L₁) / r₁ ²B = (μ₀/4π) (I₂ L₂) / r₂
whereB is the magnetic field,μ₀ is the permeability of free space, I₁ and I₂ are the currents in the two conductors, L₁ and L₂ are the lengths of the conductors, r₁ and r₂ are the distances between the point where the magnetic field is to be found and the two conductors respectively.Given data:Current in first wire I₁ = 53 A
Current in second wire I₂ = 52 A
Distance from the first wire r₁ = 1.4 m
Distance from the second wire r₂ = 4.2 m
Formula used to find the magnetic field
B = (μ₀/4π) (I₁ L₁) / r₁ ²B = (μ₀/4π) (I₂ L₂) / r₂For the first wire: The wire lies along the x-axis and carries a current of 53 A in the positive × direction. Therefore, I₁ = 53 A, L₁ = ∞ (the wire is infinite), and r₁ = 1.4 m.
So, the magnetic field due to the first wire is,B₁ = (μ₀/4π) (I₁ L₁) / r₁ ²= (4π×10⁻⁷ × 53) / (4π × 1.4²)= (53 × 10⁻⁷) / (1.96)≈ 2.70 × 10⁻⁵ T (approximately)
For the second wire: The wire is perpendicular to the xy plane, passes through the point (0, 4.2 m, 0), and carries a current of 52 A in the positive z direction.
Therefore, I₂ = 52 A, L₂ = ∞, and r₂ = 4.2 m.
So, the magnetic field due to the second wire is,B₂ = (μ₀/4π) (I₂ L₂) / r₂= (4π×10⁻⁷ × 52) / (4π × 4.2)= (52 × 10⁻⁷) / (4.2)≈ 1.24 × 10⁻⁵ T (approximately)
The magnitude of the resulting magnetic field at the point (0, 1.4 m, 0) is the vector sum of B₁ and B₂ at that point and can be calculated as,
B = √(B₁² + B₂²)= √[(2.70 × 10⁻⁵)² + (1.24 × 10⁻⁵)²]= √(7.8735 × 10⁻¹¹)≈ 8.87 × 10⁻⁶ T (approximately)
To know more about magnitude:
https://brainly.com/question/28714281
#SPJ11
Set 1: Gravitation and Planetary Motion NOTE. E Nis "type-writer notation for x10" ( 2 EB - Exam 2x10") you may use either for this class AND the AP GMm mu F GMm 9 G= 6.67 11 Nm /kg F = mg 9 GMm = mg GM 12 т GM V = 1 GM 9 GM V = - 21 T F 9 = mac T 1. A whale shark has a mass of 2.0 E4 kg and the blue whale has a mass of 1.5 E5 kg a. If the two whales are 1.5 m apart, what is the gravitational force between them? b. How does the magnitude of the gravitational force between the two animals compare to the gravitational force between each and the Earth? c. Explain why objects on Earth do not seem to be attracted 2. An asteroid with a mass of 1.5 E21 kg orbits at a distance 4E8 m from a planet with a mass of 6 E24 kg a. Determine the gravitational force on the asteroid. b. Determine the gravitational force on the planet. C Determine the orbital speed of the asteroid. d Determine the time it takes for the asteroid to complete one trip around the planet 3. A 2 2 14 kg comet moves with a velocity of 25 E4 m/s through Space. The mass of the star it is orbiting is 3 E30 kg a Determine the orbital radius of the comet b. Determine the angular momentum of the comet. (assume the comet is very small compared to the star) c An astronomer determines that the orbit is not circular as the comet is observed to reach a maximum distance from the star that is double the distance found in part (a). Using conservation of angular momentum determine the speed of the comet at its farthest position 4. A satellite that rotates around the Earth once every day keeping above the same spot is called a geosynchronous orbit. If the orbit is 3.5 E7 m above the surface of the and the radius and mass of the Earth is about 6.4 E6 m and 6.0 E24 kg respectively. According to the definition of geosynchronous, what is the period of the satellite in hours? seconds? a. Determine the speed of the satellite while in orbit b. Explain satellites could be used to remotely determine the mass of unknown planets 5. Two stars are orbiting each other in a binary star system. The mass of each of the stars is 2 E20 kg and the distance from the stars to the center of their orbit is 1 E7 m. a. Determine the gravitational force between the stars.. b. Determine the orbital speed of each star
In this set of questions, we are exploring the concepts of gravitation and planetary motion. We use the formulas related to gravitational force, orbital speed, and orbital radius to solve various problems.
Firstly, we calculate the gravitational force between two whales and compare it to the gravitational force between each whale and the Earth. Then, we determine the gravitational force on an asteroid and a planet, as well as the orbital speed and time taken for an asteroid to complete one orbit.
Next, we find the orbital radius and angular momentum of a comet orbiting a star, and also calculate the speed of the comet at its farthest position. Finally, we discuss the period of a geosynchronous satellite orbiting the Earth and how satellites can be used to determine the mass of unknown planets.
a. To calculate the gravitational force between the whale shark and the blue whale, we use the formula F = GMm/r^2, where G is the gravitational constant, M and m are the masses of the two objects, and r is the distance between them. Plugging in the values, we find the gravitational force between them.
b. To compare the gravitational force between the two animals and the Earth, we calculate the gravitational force between each animal and the Earth using the same formula.
We observe that the force between the animals is much smaller compared to the force between each animal and the Earth. This is because the mass of the Earth is significantly larger than the mass of the animals, resulting in a stronger gravitational force.
c. Objects on Earth do not seem to be attracted to each other strongly because the gravitational force between them is much weaker compared to the gravitational force between each object and the Earth.
The mass of the Earth is substantially larger than the mass of individual objects on its surface, causing the gravitational force exerted by the Earth to dominate and make the gravitational force between objects on Earth negligible in comparison.
Learn more about satellite click here:
brainly.com/question/28766254
#SPJ11
A parallel plate capacitor is formed from two 7.6 cm diameter electrodes spaced 1.6 mm apart The electric field strength inside the capacitor is 3.0 x 10 N/C Part A What is the magnitude of the charge
The magnitude of the charge on the plates of the parallel plate capacitor is 2.25 x 10^-10 C.
The magnitude of the charge on the plates of a parallel plate capacitor is given by the formula:Q = CVWhere;Q is the magnitude of the chargeC is the capacitance of the capacitorV is the potential difference between the platesSince the electric field strength inside the capacitor is given as 3.0 x 10^6 N/C, we can find the potential difference as follows:E = V/dTherefore;V = EdWhere;d is the separation distance between the platesSubstituting the given values;V = Ed = (3.0 x 10^6 N/C) x (1.6 x 10^-3 m) = 4.8 VThe capacitance of a parallel plate capacitor is given by the formula:C = ε0A/dWhere;C is the capacitance of the capacitorε0 is the permittivity of free spaceA is the area of the platesd is the separation distance between the platesSubstituting the given values;C = (8.85 x 10^-12 F/m)(π(7.6 x 10^-2 m/2)^2)/(1.6 x 10^-3 m) = 4.69 x 10^-11 FThus, the magnitude of the charge on the plates is given by;Q = CV= (4.69 x 10^-11 F) (4.8 V)= 2.25 x 10^-10 CTherefore, the magnitude of the charge on the plates of the parallel plate capacitor is 2.25 x 10^-10 C.
Learn more about electric field :
https://brainly.com/question/11482745
#SPJ11
Pool players often pride themselves on their ability to impart a large speed to a pool ball. In the sport of billiards, event organizers often remove one of the rails on a pool table to allow players to measure the speed of their break shots (the opening shot of a game in which the player strikes a ball with his pool cue). With the rail removed, a ball can fly off the table, as shown in the figure. Vo = The surface of the pool table is h = 0.710 m from the floor. The winner of the competition wants to know if he has broken the world speed record for the break shot of 32 mph (about 14.3 m/s). If the winner's ball landed a distance of d = 4.15 m from the table's edge, calculate the speed of his break shot vo. Assume friction is negligible. 10.91 At what speed v₁ did his pool ball hit the ground? V₁ = 10.93 h Incorrect d m/s m/s
The speed at which the ball hit the ground (v₁) is approximately 11.02 m/s.
How to calculate speed?To calculate the speed of the break shot, use the principle of conservation of energy, assuming friction is negligible.
Given:
Height of the table surface from the floor (h) = 0.710 m
Distance from the table's edge to where the ball landed (d) = 4.15 m
World speed record for the break shot = 32 mph (about 14.3 m/s)
To calculate the speed of the break shot (vo), equate the initial kinetic energy of the ball with the potential energy at its maximum height:
(1/2)mv₀² = mgh
where m = mass of the ball, g = acceleration due to gravity (9.8 m/s²), and h = height of the table surface.
Solving for v₀:
v₀ = √(2gh)
Substituting the given values:
v₀ = √(2 × 9.8 × 0.710) m/s
v₀ ≈ 9.80 m/s
So, the speed of the break shot (vo) is approximately 9.80 m/s.
Since friction is negligible, the horizontal component of the velocity remains constant throughout the motion. Therefore:
v₁ = d / t
where t = time taken by the ball to reach the ground.
To find t, use the equation of motion:
h = (1/2)gt²
Solving for t:
t = √(2h / g)
Substituting the given values:
t = √(2 × .710 / 9.8) s
t ≈ 0.376 s
Substituting the values of d and t, now calculate v₁:
v₁ = 4.15 m / 0.376 s
v₁ ≈ 11.02 m/s
Therefore, the speed at which the ball hit the ground (v₁) is approximately 11.02 m/s.
Find out more on speed here: https://brainly.com/question/13943409
#SPJ4
Four resistors R 1 =78Ω,R 2 =35Ω,R 3 =60Ω and R 4 =42Ω are connected with a battery of voltage 6 V. How much is the total current in the circuit? Express your answer in amperes (A).
The total current in the circuit is 0.028 (A).
To find the total current in the circuit, we can use Ohm's Law and the concept of total resistance in a series circuit. In a series circuit, the total resistance (R_total) is the sum of the individual resistances.
Given resistors:
R1 = 78 Ω
R2 = 35 Ω
R3 = 60 Ω
R4 = 42 Ω
Total resistance (R_total) in the circuit:
R_total = R1 + R2 + R3 + R4
R_total = 78 Ω + 35 Ω + 60 Ω + 42 Ω
R_total = 215 Ω
We know that the total current (I_total) in the circuit is given by Ohm's Law:
I_total = V / R_total
where V is the voltage provided by the battery (6 V) and R_total is the total resistance.
Substituting the given values:
I_total = 6 V / 215 Ω
I_total ≈ 0.028 A
Therefore, the total current in the circuit is approximately 0.028 amperes (A).
To know more about ohm's law refer here: https://brainly.com/question/1247379#
#SPJ11
A mop is pushed across the floor with a force F of 41.9 N at an angle of 0 = 49.3°. The mass of the mop head is m = 2.35 kg. Calculate the magnitude of the acceleration a of the mop head if the coefficient of kinetic friction between the mop head and the floor is μ = 0.330. a = 3.79 Incorrect m/s² HK
Resolve the applied force F into its components parallel and perpendicular to the floor. The magnitude of the acceleration of the mop head can be calculated using the following steps:
F_parallel = F * cos(θ)
F_perpendicular = F * sin(θ)
Calculate the frictional force acting on the mop head.
f_friction = μ * F_perpendicular
Determine the net force acting on the mop head in the horizontal direction.
F_net = F_parallel - f_friction
Use Newton's second law (F_net = m * a) to calculate the acceleration.
a = F_net / m
Substituting the given values into the equations:
F_parallel = 41.9 N * cos(49.3°) = 41.9 N * 0.649 = 27.171 N
F_perpendicular = 41.9 N * sin(49.3°) = 41.9 N * 0.761 = 31.8489 N
f_friction = 0.330 * 31.8489 N = 10.5113 N
F_net = 27.171 N - 10.5113 N = 16.6597 N
a = 16.6597 N / 2.35 kg = 7.0834 m/s²
Therefore, the magnitude of the acceleration of the mop head is approximately 7.08 m/s².
Summary: a = 7.08 m/s²
To learn more about acceleration click here.
brainly.com/question/31946450
#SPJ11
Write a question appropriate for this exam about how much more heat radiates away from a metal teapot that contains boiling water compared to one that contains water at X degrees Celsius. Then answer the question
The teapot containing boiling water will radiate significantly more heat than the teapot with water at X degrees Celsius due to the higher temperature.
Question:
A metal teapot contains boiling water, while another identical teapot contains water at X degrees Celsius. How much more heat radiates away from the teapot with boiling water compared to the one with water at X degrees Celsius?
Answer:
The amount of heat radiated by an object is directly proportional to the fourth power of its absolute temperature. Since boiling water is at a higher temperature than water at X degrees Celsius, the teapot containing boiling water will radiate significantly more heat compared to the teapot with water at X degrees Celsius.
Learn more about temperature:
https://brainly.com/question/27944554
#SPJ4
If the net charge on the oil drop is negative, what should be
the direction of the electric field that helps it remain
stationary?
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
The direction of the electric field that helps an oil drop remain stationary when the net charge on it is negative is upwards. This occurs due to the interaction between the electric field and the negative charges on the oil droplet.
Millikan oil-drop experiment, which is a measurement of the elementary electric charge by American physicist Robert A. Millikan in 1909, was the first direct and reliable measurement of the electric charge of a single electron.
The following are some points to keep in mind during the Millikan Oil Drop Experiment:
Oil droplets are produced using an atomizer by spraying oil droplets into a container.
When oil droplets reach the top, they are visible through a microscope.
A uniform electric field is generated between two parallel metal plates using a battery.
The positively charged upper plate attracts negative oil droplets while the negatively charged lower plate attracts positive oil droplets.
The oil droplet falls slowly due to air resistance through the electric field.
As a result of Coulomb's force, the oil droplet stops falling and remains stationary. The upward electric force balances the downward gravitational force. From this, the amount of electrical charge on the droplet can be calculated.
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
To know more about fundamental charge of the electron, visit:
https://brainly.com/question/32913598
#SPJ11
When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Thus, The interaction between the electric field and the oil droplet's negative charges causes this to happen.
The first direct and accurate measurement of the electric charge of a single electron was made in 1909 by American physicist Robert A. Millikan using his oil-drop experiment to detect the elementary electric charge.
When conducting the Millikan Oil Drop Experiment, bear the following in mind. Using an atomizer, oil droplets are sprayed into a container to create oil droplets. Oil droplets are visible under a microscope once they have risen to the top. Between two people, a consistent electric field is created.
Thus, When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Learn more about Electric field, refer to the link:
https://brainly.com/question/11482745
#SPJ4
Light of two similar wavelengths from a single source shine on a diffraction grating producing an interference pattern on a screen. The two wavelengths are not quite resolved. λ B λ A = How might one resolve the two wavelengths? Move the screen closer to the diffraction grating. Replace the diffraction grating by one with fewer lines per mm. Replace the diffraction grating by one with more lines per mm. Move the screen farther from the diffraction grating.
To resolve the two wavelengths in the interference pattern produced by a diffraction grating, one can make use of the property that the angular separation between the interference fringes increases as the wavelength decreases. Here's how the resolution can be achieved:
Replace the diffraction grating by one with more lines per mm.
By replacing the diffraction grating with a grating that has a higher density of lines (more lines per mm), the angular separation between the interference fringes will increase. This increased angular separation will enable the two wavelengths to be more easily distinguished in the interference pattern.
Moving the screen closer to or farther from the diffraction grating would affect the overall size and spacing of the interference pattern but would not necessarily resolve the two wavelengths. Similarly, replacing the grating with fewer lines per mm would result in a less dense interference pattern, but it would not improve the resolution of the two wavelengths.
To know more about wavelengths click this link -
brainly.com/question/32900586
#SPJ11
A meter stick balances horizontally on a knife-edge at the 50.0 cm mark. With two 6.04 g coins stacked over the 21.6 cm mark, the g stick is found to balance at the 31.9 cm mark. What is the mass of the meter stick? Number i Units
12.08 g * 21.6 cm = M * 31.9 cm
M = (12.08 g * 21.6 cm) / 31.9 cm
M ≈ 8.20 g
The mass of the meter stick is approximately 8.20 grams.
Let's denote the mass of the meter stick as M (in grams).
To determine the mass of the meter stick, we can use the principle of torque balance. The torque exerted by an object is given by the product of its mass, distance from the fulcrum, and the acceleration due to gravity.
Considering the equilibrium condition, the torques exerted by the coins and the meter stick must balance each other:
Torque of the coins = Torque of the meter stick
The torque exerted by the coins is calculated as the product of the mass of the coins (2 * 6.04 g) and the distance from the fulcrum (21.6 cm). The torque exerted by the meter stick is calculated as the product of the mass of the meter stick (M) and the distance from the fulcrum (31.9 cm).
(2 * 6.04 g) * (21.6 cm) = M * (31.9 cm)
Simplifying the equation:
12.08 g * 21.6 cm = M * 31.9 cm
M = (12.08 g * 21.6 cm) / 31.9 cm
M ≈ 8.20 g
Therefore, the mass of the meter stick is approximately 8.20 grams.
Learn more about torque:
https://brainly.com/question/17512177
#SPJ11
Q 12A: A rocket has an initial velocity vi and mass M= 2000 KG. The thrusters are fired, and the rocket undergoes constant acceleration for 18.1s resulting in a final velocity of Vf Part (a) What is the magnitude, in meters per squared second, of the acceleration? Part (b) Calculate the Kinetic energy before and after the thrusters are fired. ū; =(-25.7 m/s) î+(13.8 m/s) į Ū=(31.8 m/s) { +(30.4 m/s) Î.
Part (a) The magnitude of the acceleration of the rocket is 3.52 m/s².
Part (b) The kinetic energy before the thrusters are fired is 1.62 x 10⁶ J, and after the thrusters are fired, it is 3.56 x 10⁶ J.
To calculate the magnitude of the acceleration, we can use the formula of constant acceleration: Vf = vi + a*t, where Vf is the final velocity, vi is the initial velocity, a is the acceleration, and t is the time. Rearranging the formula to solve for acceleration, we have a = (Vf - vi) / t.
Substituting the given values, we get a = (31.8 m/s - (-25.7 m/s)) / 18.1 s = 57.5 m/s / 18.1 s ≈ 3.52 m/s².
To calculate the kinetic energy before the thrusters are fired, we use the formula: KE = (1/2) * M * (vi)². Substituting the given values, we get KE = (1/2) * 2000 kg * (-25.7 m/s)² ≈ 1.62 x 10⁶ J.
Similarly, the kinetic energy after the thrusters are fired is KE = (1/2) * 2000 kg * (31.8 m/s)² ≈ 3.56 x 10⁶ J.
learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ11
A wire of length 10 meters carrying a current of .6 amps to the left lies along the x-axis from (-5,0) to (5,0) meters. a) Find the Magnetic field created by this wire at (0,8) meters. b) Find the Magnetic field created by this wire at (10,0) meters. c) Find the Magnetic field created by this wire at (10,8) meters.
The magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at:
a) point (0,8) m is approximately 3.75 × 10⁻⁹ T,
b) point (10,0) m is approximately 3 × 10⁻⁹ T and
c) point (10,8) m is approximately 2.68 × 10⁻⁹ T.
To find the magnetic field created by the wire at the given points, we can use the formula for the magnetic field produced by a straight current-carrying wire.
The formula is given by:
B = (μ₀ × I) / (2πr),
where
B is the magnetic field,
μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A),
I is the current, and
r is the distance from the wire.
a) At point (0,8) meters:The wire lies along the x-axis, and the point of interest is above the wire. The distance from the wire to the point is 8 meters. Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 8 m),
B = (0.6 × 10⁻⁷ T·m) / (16 m),
B = 3.75 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (0,8) meters is approximately 3.75 × 10⁻⁹ T.
b) At point (10,0) meters:The wire lies along the x-axis, and the point of interest is to the right of the wire. The distance from the wire to the point is 10 meters. Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A ×0.6 A) / (2π × 10 m),
B = (0.6 * 10⁻⁷ T·m) / (20 m),
B = 3 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (10,0) meters is approximately 3 × 10⁻⁹ T.
c) At point (10,8) meters:The wire lies along the x-axis, and the point of interest is above and to the right of the wire. The distance from the wire to the point is given by the diagonal distance of a right triangle with sides 8 meters and 10 meters. Using the Pythagorean theorem, we can find the distance:
r = √(8² + 10²) = √(64 + 100) = √164 = 4√41 meters.
Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 4√41 m),
B = (0.6 × 10⁻⁷ T·m) / (8√41 m),
B ≈ 2.68 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.
Hence, the magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at a) point (0,8) meters is approximately 3.75 × 10⁻⁹ T, b) point (10,0) meters is approximately 3 × 10⁻⁹ T and c) point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.
Learn more about Magnetic field from the given link:
https://brainly.com/question/30830460
#SPJ11
The owner of a large dairy farm with 10,000 cattle proposes to produce biogas from the manure. The proximate analysis of a sample of manure collected at this facility was as follows: Volatile solids (VS) content = 75% of dry matter. Laboratory tests indicated that the biochemical methane potential of a manure sample was 0.25 m³ at STP/ kg VS. a) Estimate the daily methane production rate (m³ at STP/day). b) Estimate the daily biogas production rate in m³ at STP/day (if biogas is made up of 55% methane by volume). c) If the biogas is used to generate electricity at a heat rate of 10,500 BTU/kWh, how many units of electricity (in kWh) can be produced annually? d) It is proposed to use the waste heat from the electrical power generation unit for heating barns and milk parlors, and for hot water. This will displace propane (C3H8) gas which is currently used for these purposes. If 80% of waste heat can be recovered, how many pounds of propane gas will the farm displace annually? Note that (c) and (d) together become a CHP unit. e) If the biogas is upgraded to RNG for transportation fuel, how many GGEs would be produced annually? f) If electricity costs 10 cents/kWh, propane gas costs 55 cents/lb and gasoline $2.50 per gallon, calculate farm revenues and/or avoided costs for each of the following biogas utilization options (i) CHP which is parts (c) and (d), (ii) RNG which is part (e).
(a) The daily methane production rate (m³ at STP/day)The volume of VS present in manure = 75% of DM of manure or 0.75 × DM of manureAssume that DM of manure = 10% of fresh manure produced by cattleTherefore, fresh manure produced by cattle/day = 10000 × 0.1 = 1000 tonnes/dayVS in 1 tonne of fresh manure = 0.75 × 0.1 = 0.075 tonneVS in 1000 tonnes of fresh manure/day = 1000 × 0.075 = 75 tonnes/dayMethane produced from 1 tonne of VS = 0.25 m³ at STPTherefore, methane produced from 1 tonne of VS in a day = 0.25 × 1000 = 250 m³ at STP/dayMethane produced from 75 tonnes of VS in a day = 75 × 250 = 18,750 m³ at STP/day
(b) The daily biogas production rate in m³ at STP/day (if biogas is made up of 55% methane by volume).Biogas produced from 75 tonnes of VS/day will contain:
Methane = 55% of 18750 m³ at STP = 55/100 × 18750 = 10,312.5 m³ at STPOther gases = 45% of 18750 m³ at STP = 45/100 × 18750 = 8437.5 m³ at STPTherefore, the total volume of biogas produced in a day = 10,312.5 + 8437.5 = 18,750 m³ at STP/day(c) If the biogas is used to generate electricity at a heat rate of 10,500 BTU/kWh, how many units of electricity (in kWh) can be produced annually?One kWh = 3,412 BTU of heat10,312.5 m³ at STP of methane produced from the biogas = 10,312.5/0.7179 = 14,362 kg of methaneThe energy content of methane = 55.5 MJ/kgEnergy produced from the biogas/day = 14,362 kg × 55.5 MJ/kg = 798,021 MJ/dayHeat content of biogas/day = 798,021 MJ/dayHeat rate of electricity generation = 10,500 BTU/kWhElectricity produced/day = 798,021 MJ/day / (10,500 BTU/kWh × 3,412 BTU/kWh) = 22,436 kWh/dayTherefore, the annual electricity produced = 22,436 kWh/day × 365 days/year = 8,189,540 kWh/year
(d) It is proposed to use the waste heat from the electrical power generation unit for heating barns and milk parlors, and for hot water. This will displace propane (C3H8) gas which is currently used for these purposes. If 80% of waste heat can be recovered, how many pounds of propane gas will the farm displace annually?Propane energy content = 46.3 MJ/kgEnergy saved by using waste heat = 798,021 MJ/day × 0.8 = 638,417 MJ/dayTherefore, propane required/day = 638,417 MJ/day ÷ 46.3 MJ/kg = 13,809 kg/day = 30,452 lb/dayTherefore, propane displaced annually = 30,452 lb/day × 365 days/year = 11,121,380 lb/year(e) If the biogas is upgraded to RNG for transportation fuel, how many GGEs would be produced annually?Energy required to produce 1 GGE of CNG = 128.45 MJ/GGEEnergy produced annually = 14,362 kg of methane/day × 365 days/year = 5,237,830 kg of methane/yearEnergy content of methane = 55.5 MJ/kgEnergy content of 5,237,830 kg of methane = 55.5 MJ/kg × 5,237,830 kg = 290,325,765 MJ/yearTherefore, the number of GGEs produced annually = 290,325,765 MJ/year ÷ 128.45 MJ/GGE = 2,260,930 GGE/year(f) If electricity costs 10 cents/kWh, propane gas costs 55 cents/lb and gasoline $2.50 per gallon, calculate farm revenues and/or avoided costs for each of the following biogas utilization options (i) CHP which is parts (c) and (d), (ii) RNG which is part (e).CHP(i) Electricity sold annually = 8,189,540 kWh/year(ii) Propane displaced annually = 11,121,380 lb/yearRevenue from electricity = 8,189,540 kWh/year × $0.10/kWh = $818,954/yearSaved cost for propane = 11,121,380 lb/year × $0.55/lb = $6,116,259/yearTotal revenue and/or avoided cost = $818,954/year + $6,116,259/year = $6,935,213/yearRNG(i) Number of GGEs produced annually = 2,260,930 GGE/yearRevenue from RNG = 2,260,930 GGE/year × $2.50/GGE = $5,652,325/yearTherefore, farm reve
About BiogasBiogas is a gas produced by anaerobic activity which degrades organic materials. Examples of these organic materials are manure, domestic sewage, or any organic waste that can be decomposed by living things under anaerobic conditions. The main ingredients in biogas are methane and carbon dioxide.
Learn More About Biogas at https://brainly.com/question/32179195
#SPJ11
A particle is incident upon a square barrier of height \( U \) and width \( L \) and has \( E=U \). What is the probability of transmission? You must show all work.
The probability of transmission is zero.
Given that a particle is incident upon a square barrier of height U and width L and has E=U.
We need to find the probability of transmission.
Let us assume that the energy of the incident particle is E.
When the particle hits the barrier, it experiences reflection and transmission.
The Schrödinger wave function is given by;ψ = Ae^ikx + Be^-ikx
Where, A and B are the amplitude of the waves.
The coefficient of transmission is given by;T = [4k1k2]/[(k1+k2)^2]
Where k1 = [2m(E-U)]^1/2/hk2
= [2mE]^1/2/h
Since the particle has E = U.
Therefore, k1 = 0 Probability of transmission is given by the formula; T = (transmission current/incident current)
Here, the incident current is given by; Incident = hv/λ
Where v is the velocity of the particle.
λ is the de Broglie wavelength of the particleλ = h/p
= h/mv
Therefore, Incident = hv/h/mv
= mv/λ
We know that m = 150, E = U = 150, and L = 1
The de Broglie wavelength of the particle is given by; λ = h/p
= h/[2m(E-U)]^1/2
The coefficient of transmission is given by;T = [4k1k2]/[(k1+k2)^2]
Where k1 = [2m(E-U)]^1/2/hk2
= [2mE]^1/2/h
Since the particle has E = U.
Therefore, k1 = 0k2
= [2mE]^1/2/h
= [2 × 150 × 1.6 × 10^-19]^1/2 /h
= 1.667 × 10^10 m^-1
Now, the coefficient of transmission,T = [4k1k2]/[(k1+k2)^2]
= [4 × 0 × 1.667 × 10^10]/[(0+1.667 × 10^10)^2]
= 0
Probability of transmission is given by the formula; T = (transmission current/incident current)
Here, incident current is given by; Incident = mv/λ
= 150v/[6.626 × 10^-34 / (2 × 150 × 1.6 × 10^-19)]
Iincident = 3.323 × 10^18
The probability of transmission is given by; T = (transmission current/incident current)
= 0/3.323 × 10^18
= 0
Hence, the probability of transmission is zero.
Learn more about transmission from the given link;
https://brainly.in/question/54329779
#SPJ11
1. An 8-m-long double pipe heat exchanger is constructed of 4 -std. type M and 3 std type M copper tubing. It is used to cool unused engine oil. The exchanger takes water into the annulus at 10 ∘ C at a rate of 2.Ykg/s, which exits at 10.7 ∘ C, and oil into the pipe at 140 ∘ C at a rate of 0.2 kg/s. Determine the expected outlet temperature of the oil. Assume counter flow.
The expected outlet temperature of oil is 48.24°C.
Given Data:
Length of heat exchanger, L = 8 m
Mass flow rate of water, mw = 2.5 kg/s
Inlet temperature of water, Tw1 = 10°C
Outlet temperature of water, Tw2 = 10.7°C
Mass flow rate of oil, mo = 0.2 kg/s
Inlet temperature of oil, To1 = 140°C (T1)
Type of copper tube, Std. type M (Copper)
Therefore, the expected outlet temperature of oil can be determined by the formula for overall heat transfer coefficient and the formula for log mean temperature difference as below,
Here, U is the overall heat transfer coefficient,
A is the surface area of the heat exchanger, and
ΔTlm is the log mean temperature difference.
On solving the above equation we can determine ΔTlm.
Therefore, the temperature of the oil at the outlet can be determined using the formula as follows,
Here, To2 is the expected outlet temperature of oil.
Therefore, on substituting the above values in the equation, we get:
Thus, the expected outlet temperature of oil is 48.24°C.
Learn more about temperature, here
https://brainly.com/question/1461624
#SPJ11
A capacitor is charged using a 400 V battery. The charged capacitor is then removed from the battery. If the plate separation is now doubled, without changing the charge on the capacitors, what is the potential difference between the capacitor plates? A. 100 V B. 200 V C. 400 V D. 800 V E. 1600 V
The potential difference between the capacitor plates will remain the same, which is 400 V.
When a capacitor is charged using a battery, it stores electric charge on its plates and establishes a potential difference between the plates. In this case, the capacitor was initially charged using a 400 V battery. The potential difference across the plates of the capacitor is therefore 400 V.
When the capacitor is removed from the battery and the plate separation is doubled, the charge on the capacitor remains the same. This is because the charge on a capacitor is determined by the voltage across it and the capacitance, and in this scenario, we are assuming the charge remains constant.
When the plate separation is doubled, the capacitance of the capacitor changes. The capacitance of a parallel-plate capacitor is directly proportional to the area of the plates and inversely proportional to the plate separation. Doubling the plate separation halves the capacitance.
Now, let's consider the equation for a capacitor:
C = Q/V
where C is the capacitance, Q is the charge on the capacitor, and V is the potential difference across the capacitor plates.
Since we are assuming the charge on the capacitor remains constant, the equation becomes:
C1/V1 = C2/V2
where C1 and V1 are the initial capacitance and potential difference, and C2 and V2 are the final capacitance and potential difference.
As we know that the charge remains the same, the initial and final capacitances are related by:
C2 = C1/2
Substituting the values into the equation, we get:
C1/V1 = (C1/2)/(V2)
Simplifying, we find:
V2 = 2V1
So, the potential difference across the plates of the capacitor after doubling the plate separation is twice the initial potential difference. Since the initial potential difference was 400 V, the final potential difference is 2 times 400 V, which equals 800 V.
Therefore, the correct answer is D. 800 V.
To learn more about potential difference click here:
brainly.com/question/23716417
#SPJ11
1. Which of the following are conditions for simple harmonic
motion? I. The frequency must be constant. II. The restoring force
is in the opposite direction to the displacement. III. There must
be an
The conditions for simple harmonic motion are:
I. The frequency must be constant.
II. The restoring force is in the opposite direction to the displacement.
Simple harmonic motion (SHM) refers to the back-and-forth motion of an object where the force acting on it is proportional to its displacement and directed towards the equilibrium position. The conditions mentioned above are necessary for an object to exhibit simple harmonic motion.
I. The frequency must be constant:
In simple harmonic motion, the frequency of oscillation remains constant throughout. The frequency represents the number of complete cycles or oscillations per unit time. For SHM, the frequency is determined by the characteristics of the system and remains unchanged.
II. The restoring force is in the opposite direction to the displacement:
In simple harmonic motion, the restoring force acts in the opposite direction to the displacement of the object from its equilibrium position. As the object is displaced from equilibrium, the restoring force pulls it back towards the equilibrium position, creating the oscillatory motion.
III. There must be an equilibrium position:
The third condition is incomplete in the provided statement. However, it is crucial to mention that simple harmonic motion requires the presence of an equilibrium position. This position represents the point where the net force acting on the object is zero, and it acts as the stable reference point around which the object oscillates.
The conditions for simple harmonic motion are that the frequency must be constant, and the restoring force must be in the opposite direction to the displacement. Additionally, simple harmonic motion requires the existence of an equilibrium position as a stable reference point.
To know more about harmonic motion ,visit:
https://brainly.com/question/26114128
#SPJ11
Mary applies a force of 25 N to push a box with an acceleration of 0.45 ms. When she increases the pushing force to 86 N, the box's acceleration changes to 0.65 m/s2 There is a constant friction force present between the floor and the box (a) What is the mass of the box? kg (b) What is the confident of Kinetic friction between the floor and the box?
The mass of the box is approximately 55.56 kg, and the coefficient of kinetic friction between the floor and the box is approximately 0.117.
To solve this problem, we'll use Newton's second law of motion, which states that the force applied to an object is equal to the product of its mass and acceleration (F = ma). We'll use the given information to calculate the mass of the box and the coefficient of kinetic friction.
(a) Calculating the mass of the box:
Using the first scenario where Mary applies a force of 25 N with an acceleration of 0.45 m/s²:
F₁ = 25 N
a₁ = 0.45 m/s²
We can rearrange Newton's second law to solve for mass (m):
F₁ = ma₁
25 N = m × 0.45 m/s²
m = 25 N / 0.45 m/s²
m ≈ 55.56 kg
Therefore, the mass of the box is approximately 55.56 kg.
(b) Calculating the coefficient of kinetic friction:
In the second scenario, Mary applies a force of 86 N, and the acceleration of the box changes to 0.65 m/s². Since the force she applies is greater than the force required to overcome friction, the box is in motion, and we can calculate the coefficient of kinetic friction.
Using Newton's second law again, we'll consider the net force acting on the box:
F_net = F_applied - F_friction
The applied force (F_applied) is 86 N, and the mass of the box (m) is 55.56 kg. We'll assume the coefficient of kinetic friction is represented by μ.
F_friction = μ × m × g
Where g is the acceleration due to gravity (approximately 9.81 m/s²).
F_net = m × a₂
86 N - μ × m × g = m × 0.65 m/s²
Simplifying the equation:
μ × m × g = 86 N - m × 0.65 m/s²
μ × g = (86 N/m - 0.65 m/s²)
Substituting the values:
μ × 9.81 m/s² = (86 N / 55.56 kg - 0.65 m/s²)
Solving for μ:
μ ≈ (86 N / 55.56 kg - 0.65 m/s²) / 9.81 m/s²
μ ≈ 0.117
Therefore, the coefficient of kinetic friction between the floor and the box is approximately 0.117.
To know more about kinetic friction refer to-
https://brainly.com/question/30886698
#SPJ11
The plot below shows the vertical displacement vs horizontal position for a wave travelling in the positive x direction at time equal 0s(solid) and 2s(dashed). Which one of the following equations best describes the wave?
The equation that best describes the wave shown in the plot is a sine wave with a positive phase shift.
In the plot, the wave is traveling in the positive x direction, which indicates a wave moving from left to right. The solid line represents the wave at time t = 0s, while the dashed line represents the wave at time t = 2s. This indicates that the wave is progressing in time.
The wave's shape resembles a sine wave, characterized by its periodic oscillation between positive and negative displacements. Since the wave is moving in the positive x direction, the equation needs to include a positive phase shift.
Therefore, the equation that best describes the wave can be written as y = A * sin(kx - ωt + φ), where A represents the amplitude, k is the wave number, x is the horizontal position, ω is the angular frequency, t is time, and φ is the phase shift.
Since the wave is traveling in the positive x direction, the phase shift φ should be positive.
To learn more about phase shift click here:
brainly.com/question/23959972
#SPJ11