Given f(x)=x²−1,g(x)=√2x, and h(x)=1/x, determine the value of f(g(h(2))). a. (x²−1)√x
b. 3
c. 0
d. 1

The option B) yields the highest value for Z, which is 56.5. Therefore, the correct answer is B) x1 = 5, x2 = 5.25, Z = 56.5

To determine the correct answer, we can substitute each option into the objective function and check if the constraints are satisfied. Let's evaluate each option:

A) x1 = 5, x2 = 4.63, Z = 52.78

Checking the constraints:

17x1 + 8x2 = 17(5) + 8(4.63) = 85 + 37.04 = 122.04 ≤ 136 (constraint satisfied)

3x1 + 4x2 = 3(5) + 4(4.63) = 15 + 18.52 = 33.52 ≤ 36 (constraint satisfied)

B) x1 = 5, x2 = 5.25, Z = 56.5

Checking the constraints:

17x1 + 8x2 = 17(5) + 8(5.25) = 85 + 42 = 127 ≤ 136 (constraint satisfied)

3x1 + 4x2 = 3(5) + 4(5.25) = 15 + 21 = 36 ≤ 36 (constraint satisfied)

C) x1 = 5, x2 = 5, Z = 55

Checking the constraints:

17x1 + 8x2 = 17(5) + 8(5) = 85 + 40 = 125 ≤ 136 (constraint satisfied)

3x1 + 4x2 = 3(5) + 4(5) = 15 + 20 = 35 ≤ 36 (constraint satisfied)

D) x1 = 4, x2 = 6, Z = 56

Checking the constraints:

17x1 + 8x2 = 17(4) + 8(6) = 68 + 48 = 116 ≤ 136 (constraint satisfied)

3x1 + 4x2 = 3(4) + 4(6) = 12 + 24 = 36 ≤ 36 (constraint satisfied)

From the calculations above, we see that options B), C), and D) satisfy all the constraints. However, option B) yields the highest value for Z, which is 56.5. Therefore, the correct answer is: B) x1 = 5, x2 = 5.25, Z = 56.5.

To know more about Constraint here:

https://brainly.com/question/33441689

#SPJ11

B = PAKP⁻¹ holds for k + 1. By induction, we conclude that B = PAKP⁻¹ for all integers k, positive and negative.

Let's prove that if B = PAP⁻¹ for some invertible matrix P, then B = PAKP⁻¹ for all integers k, positive and negative.

Let P be an invertible matrix, and let B = PAP⁻¹. Now, consider an arbitrary integer k, positive or negative. Our goal is to show that B = PAKP⁻¹. We will proceed by induction on k.

Base case: k = 0.

In this case, P⁰ = I, where I represents the identity matrix. Thus, B = P⁰AP⁰⁻¹ = AI = A = P⁰AP⁰⁻¹ = PAP⁻¹. Hence, B = PAKP⁻¹ holds for k = 0.

Induction step:

Assume that B = PAKP⁻¹ holds for some integer k. We aim to show that B = PA(k+1)P⁻¹ also holds. Using the induction hypothesis, we have B = PAKP⁻¹. Multiplying both sides by A, we obtain AB = PAKAP⁻¹ = PA(k+1)P⁻¹. Then, multiplying both sides by P⁻¹, we get B = PAKP⁻¹ = PA(k+1)P⁻¹.

Therefore, B = PAKP⁻¹ holds for k + 1. By induction, we conclude that B = PAKP⁻¹ for all integers k, positive and negative.

In summary, we have shown that B = PAKP⁻¹ for all integers k, positive and negative.

Learn more about integers

https://brainly.com/question/490943

#SPJ11

The expression given can be expressed in it's splest term as 5 : 3

Given the expression :

To simplify to it's lowest term , divide both values by 44

Hence, we have :

At this point, none of the values can be divide further by a common factor.

Hence, the expression would be 5:3

Learn more on ratios :https://brainly.com/question/2328454

#SPJ1

Answer:

Step-by-step explanation:

Use the Law of Sin:     [tex]\frac{a}{sinA} = \frac{b}{sinB} =\frac{c}{sinC}[/tex]

[tex]\frac{b}{sin 15} = \frac{2}{sin105}[/tex]

Cross Multiply so  sin105 x b = 2 x sin15

divide both sides by sin105 to get. b = (2 x sin15)/sin105

b = (0.51763809)/(0.9659258260

b = 0.535898385.  round to nearest tenth, b = 0.5

The coordinates of X that partitions XY in the ratio 5 to 4 include the following: X (-1.6, -7).

In this scenario, line ratio would be used to determine the coordinates of the point X on the directed line segment AB that partitions the segment into a ratio of 5 to 4.

In Mathematics and Geometry, line ratio can be used to determine the coordinates of X and this is modeled by this mathematical equation:

M(x, y) = [(mx₂ + nx₁)/(m + n)],  [(my₂ + ny₁)/(m + n)]

By substituting the given parameters into the formula for line ratio, we have;

M(x, y) = [(5(2) + 4(-6))/(5 + 4)],  [(5(-11) + 4(-2))/(5 + 4)]

M(x, y) = [(10 - 24)/(9)],  [(-55 - 8)/9]

M(x, y) = [-14/9],  [(-63)/9]

M(x, y) = (-1.6, -7)

Read more on line ratio here: brainly.com/question/14457392

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

1. Find the Maclaurin series approximation: Substitute [tex]x^2[/tex] for x in [tex]e^x[/tex] series expansion.

2. Graph the original function: Plot 10 ordered pairs of f(x) = [tex]e^(-x^2)[/tex] within the given range and connect them with a curve.

3. Graph the zeroth order Maclaurin approximation: Plot 10 ordered pairs of f(x) ≈ 1 within the same range and connect them.

4. Scale the graph appropriately and label the axes to present the functions clearly.

1. Maclaurin Series Approximation

The Maclaurin series approximation for the function f(x) = [tex]e^(-x^2)[/tex] can be found by substituting [tex]x^2[/tex] for x in the Maclaurin series expansion of the exponential function:

[tex]e^x = 1 + x + (x^2 / 2!) + (x^3 / 3!) + ...[/tex]

Substituting x^2 for x:

[tex]e^(-x^2) = 1 - x^2 + (x^4 / 2!) - (x^6 / 3!) + ...[/tex]

So, the Maclaurin series approximation for f(x) is:

f(x) ≈ [tex]1 - x^2 + (x^4 / 2!) - (x^6 / 3!) + ...[/tex]

2. Graphing the Original Function

To graph the original function f(x) =[tex]e^(-x^2)[/tex], follow these steps:

i. Take a piece of graph paper and draw the coordinate axes with labeled units.

ii. Determine the range of x-values you want to plot, which is -0.5 to 0.5 in this case.

iii. Calculate the corresponding y-values for at least 10 x-values within the specified range by evaluating f(x) =[tex]e^(-x^2)[/tex].

For example, let's choose five x-values within the range and calculate their corresponding y-values:

x = -0.5, y =[tex]e^(-(-0.5)^2) = e^(-0.25)[/tex]

x = -0.4, y = [tex]e^(-(-0.4)^2) = e^(-0.16)[/tex]

x = -0.3, y = [tex]e^(-(-0.3)^2) = e^(-0.09)[/tex]

x = -0.2, y = [tex]e^(-(-0.2)^2) = e^(-0.04)[/tex]

x = -0.1, y = [tex]e^(-(-0.1)^2) = e^(-0.01)[/tex]

Similarly, calculate the corresponding y-values for five more x-values within the range.

iv. Plot the ordered pairs (x, y) on the graph, using one color to represent the original function. Connect the ordered pairs with a smooth curve.

3. Graphing the Zeroth Order Maclaurin Approximation

To graph the zeroth order Maclaurin series approximation f(x) ≈ 1, follow these steps:

i. On the same graph with the same interval and scale as before, choose a different color of ink or pencil to distinguish the approximation from the original function.

ii. Plot the ordered pairs for the zeroth order approximation, which means y = 1 for all x-values within the specified range.

iii. Connect the ordered pairs with a smooth curve.

Remember to scale the graph to take up the majority of the page, label the axes, and any important points or features on the graph.

Learn more about Maclaurin series approximation visit

brainly.com/question/32769570

#SPJ11

The value of t such that the area to the left of −|t| plus the area to the right of |t| equals 0.01 is: t = −|t1| + 0.005 = −0.245 (approx)

Let’s consider the value of t such that the area to the left of −|t|−|t| plus the area to the right of |t||t| equals 0.01. Now, we know that the area under the standard normal distribution curve between z = 0 and any positive value of z is 0.5. Also, the total area under the standard normal distribution curve is 1.Using this information, we can calculate the value of t such that the area to the left of −|t| is equal to the area to the right of |t|. Let’s call this value of t as t1.So, we have:

Area to the left of −|t1| = 0.5 (since |t1| is positive)
Area to the right of |t1| = 0.5 (since |t1| is positive)

Therefore, the total area between −|t1| and |t1| is 1. We need to find the value of t such that the total area between −|t| and |t| is 0.01. This means that the total area to the left of −|t| is 0.005 and the total area to the right of |t| is also 0.005.

Now, we can calculate the value of t as follows:

Area to the left of −|t1| = 0.5
Area to the left of −|t| = 0.005

Therefore, the area between −|t1| and −|t| is:

Area between −|t1| and −|t| = 0.5 − 0.005 = 0.495

Similarly, the area between |t1| and |t| is:

Area between |t1| and |t| = 1 − 0.495 − 0.005 = 0.5

Area to the right of |t1| = 0.5
Area to the right of |t| = 0.005

Therefore, the value of t such that the area to the left of −|t| plus the area to the right of |t| equals 0.01 is the value of t1 plus the value of t:

−|t1| + |t| = 0.005
2|t1| = 0.5
|t1| = 0.25

Therefore, the value of t such that the area to the left of −|t| plus the area to the right of |t| equals 0.01 is:
t = −|t1| + 0.005 = −0.245 (approx)

To know more on the normal distribution curve refer to:

https://brainly.com/question/30783928

#SPJ11

The value of xy is -54

To simplify the expression √63 − 36√3, we need to simplify each term separately and then subtract the results.

1. Simplify √63:
We can factorize 63 as 9 * 7. Taking the square root of each factor, we get √63 = √(9 * 7) = √9 * √7 = 3√7.

2. Simplify 36√3:
We can rewrite 36 as 6 * 6. Taking the square root of 6, we get √6. Therefore, 36√3 = 6√6 * √3 = 6√(6 * 3) = 6√18.

3. Subtract the simplified terms:
Now, we can substitute the simplified forms back into the original expression:
√63 − 36√3 = 3√7 − 6√18.

Since the terms involve different square roots (√7 and √18), we can't combine them directly. But we can simplify further by factoring the square root of 18.

4. Simplify √18:
We can factorize 18 as 9 * 2. Taking the square root of each factor, we get √18 = √(9 * 2) = √9 * √2 = 3√2.

Substituting this back into the expression, we have:
3√7 − 6√18 = 3√7 − 6 * 3√2 = 3√7 − 18√2.

5. Now, we can express the expression as x y√3:
Comparing the simplified expression with x y√3, we can see that x = 3, y = -18.

Therefore, the value of xy is 3 * -18 = -54.

So, the correct answer is not provided in the given options.

To know more about simplifying roots, refer here:

https://brainly.com/question/11867272#

#SPJ11

Given a linear transformation T in L(F2) such that T(x, y) = (y, x) and it has the same eigenvalues as ST.

We need to find all eigenvalues and eigenvectors of T.

[tex]Solution: Since T is a linear transformation in L(F2) such that T(x, y) = (y, x),[/tex]

let us consider T(1, 0) and T(0, 1) respectively.

[tex]T(1, 0) = (0, 1) and T(0, 1) = (1, 0).For any (x, y) in F2, it can be written as (x, y) = x(1, 0) + y(0, 1).[/tex]

Therefore, T(x, y) = T(x(1, 0) + y(0, 1)) = xT(1, 0) + yT(0, 1) = x(0, 1) + y(1, 0) = (y, x)

[tex]Thus, the matrix of T with respect to the standard ordered basis B of F2 is given by A = [T]B = [T(1, 0) T(0, 1)] = [0 1; 1 0][/tex]

The eigenvalues and eigenvectors of A are calculated as follows: We find the eigenvalues as:|A - λI| = 0⇒ |[0-λ 1;1 0-λ]| = 0⇒ λ2 - 1 = 0⇒ λ1 = 1 and λ2 = -1

Therefore, the eigenvalues of T are 1 and -1.

Now, we find the eigenvectors of T corresponding to each eigenvalue.

[tex]For eigenvalue λ1 = 1, we have(A - λ1I)X = 0⇒ [0 1; 1 0]X = [0;0]⇒ x2 = 0 and x1 = 0or, X1 = [0;0][/tex]is the eigenvector corresponding to λ1 = 1.

For eigenvalue λ2 = -1, we have(A - λ2I)X = 0⇒ [0 1; 1 0]X = [0;0]⇒ x2 = 0 and x1 = 0or, X2 = [0;0] is the eigenvector corresponding to λ2 = -1.

Since T has only two eigenvectors {X1, X2}, therefore the diagonal matrix D = [Dij]2x2 with diagonal entries as the eigenvalues (λ1, λ2) and the eigenvectors as its columns (X1, X2) such that A = PDP^-1where, P = [X1 X2].

[tex]Then, the eigenvalues and eigenvectors of T are given by λ1 = 1, λ2 = -1 and X1 = [1;0], X2 = [0;1] respectively.[/tex]

To know more about the word diagonal visits :

https://brainly.com/question/22491728

#SPJ11

The fundamental solutions to the differential equation are:

The characteristic equation that factors in a 9th order, linear, homogeneous, constant coefficient differential equation is (r² − 4r+8)³√(r + 2)² = 0.

To solve this equation, we need to split it into its individual factors.The factors are: (r² − 4r+8)³ and (r + 2)²

To determine the roots of the equation, we'll first solve the quadratic equation that represents the first factor: (r² − 4r+8) = 0.

Using the quadratic formula, we get:

r = (4±√(16−4×1×8))/2r = 2±2ir = 2+2i, 2-2i

These are the complex roots of the quadratic equation. Because the root (r+2) has a power of two, it has a total of four roots:r = -2, -2 (repeated)

Subsequently, the total number of roots of the characteristic equation is 6 real roots (two from the quadratic equation and four from (r+2)²) and 6 complex roots (three from the quadratic equation)

Because the roots are distinct, the nine fundamental solutions can be expressed in terms of each root. Therefore, the fundamental solutions to the differential equation are:

y1 = e^(2x)sin(2x)

y2 = e^(2x)cos(2x)

y3 = e^(-2x)y4 = xe^(2x)sin(2x)

y5 = xe^(2x)cos(2x)

y6 = e^(2x)sin(2x)cos(2x)

y7 = xe^(-2x)

y8 = x²e^(2x)sin(2x)

y9 = x²e^(2x)cos(2x)

Learn more about differential equation at

https://brainly.com/question/31504613

#SPJ11

Solutions for the given recurrence relations:

(a) Solutions for an ·an-1-12an-2 = 0, n ≥ 2, with ao = 1 and a₁ = 1.

(b) Solutions for a_n = 10a_(n-1) - 25a_(n-2) + 32, n ≥ 2, with ao = 3 and a₁ = 7.

(c) Solutions for a_n + a_(n-1) - 12a_(n-2) = 2^(n).

(d) Solutions for a_n = 4a_(n-1) - 4a_(n-2).

(e) Solutions for a_n = 2a_(n-1) - a_(n-2) + 2.

(f) Solutions for a_n - 2a_(n-1) - 3a_(n-2) = 3^(n).

In (a), the recurrence relation is an ·an-1-12an-2 = 0, and the initial conditions are ao = 1 and a₁ = 1. Solving this relation involves identifying the values of an that make the equation true.

In (b), the recurrence relation is a_n = 10a_(n-1) - 25a_(n-2) + 32, and the initial conditions are ao = 3 and a₁ = 7. Similar to (a), finding solutions involves identifying the values of a_n that satisfy the given relation.

In (c), the recurrence relation is a_n + a_(n-1) - 12a_(n-2) = 2^(n). Here, the task is to find all solutions of a_n that satisfy the relation for each value of n.

In (d), the recurrence relation is a_n = 4a_(n-1) - 4a_(n-2). Solving this relation entails determining the values of a_n that make the equation true.

In (e), the recurrence relation is a_n = 2a_(n-1) - a_(n-2) + 2. The goal is to find all solutions of a_n that satisfy the relation for each value of n.

In (f), the recurrence relation is a_n - 2a_(n-1) - 3a_(n-2) = 3^(n). Solving this relation involves finding all values of a_n that satisfy the equation.

Solving recurrence relations is an essential task in understanding the behavior and patterns within a sequence of numbers. It requires analyzing the relationship between terms and finding a general expression or formula that describes the sequence. By utilizing the given initial conditions, the solutions to the recurrence relations can be determined, providing insights into the values of the sequence at different positions.

Learn more about recurrence relations

brainly.com/question/32773332

#SPJ11

The property (1)-¹(t₁, t₀) = $(t₀,t₁) holds true in matrix theory.

In matrix theory, the notation (1)-¹(t₁, t₀) represents the inverse of the matrix (1) with respect to the operation of matrix multiplication. The expression $(to,t₁) denotes the transpose of the matrix (to,t₁).

To understand the property, let's consider the matrix (1) as an identity matrix of appropriate dimension. The identity matrix is a square matrix with ones on the main diagonal and zeros elsewhere. When we take the inverse of the identity matrix, we obtain the same matrix. Therefore, (1)-¹(t₁, t₀) would be equal to (1)(t₁, t₀) = (t₁, t₀), which is the same as $(t₀,t₁).

This property can be understood intuitively by considering the effect of the inverse and transpose operations on the identity matrix. The inverse of the identity matrix simply results in the same matrix, and the transpose operation also leaves the identity matrix unchanged. Hence, the property (1)-¹(t₁, t₀) = $(t₀,t₁) holds true.

The property (1)-¹(t₁, t₀) = $(t₀,t₁) in matrix theory states that the inverse of the identity matrix, when transposed, is equal to the transpose of the identity matrix. This property can be derived by considering the behavior of the inverse and transpose operations on the identity matrix.

Learn more about matrix

brainly.com/question/29000721

#SPJ11

The probability of selecting a defective compact disk from a randomly chosen label produced by the company is 0.0428 or 4.28%. The correct option is d.

To find the probability of a randomly selected label produced by the company containing a defective compact disk, we need to consider the probabilities of each manufacturer's defective compact disks and their respective supply percentages.

Let's calculate the probability:

1. Manufacturer I produces 36% of the compact disks, and 3% of their disks are defective. So, the probability of selecting a defective disk from Manufacturer I is (36% * 3%) = 0.36 * 0.03 = 0.0108.

2. Manufacturer II produces 54% of the compact disks, and 5% of their disks are defective. The probability of selecting a defective disk from Manufacturer II is (54% * 5%) = 0.54 * 0.05 = 0.0270.

3. Manufacturer III produces 10% of the compact disks, and 5% of their disks are defective. The probability of selecting a defective disk from Manufacturer III is (10% * 5%) = 0.10 * 0.05 = 0.0050.

Now, we can find the total probability by summing up the probabilities from each manufacturer:

Total probability = Probability from Manufacturer I + Probability from Manufacturer II + Probability from Manufacturer III
                 = 0.0108 + 0.0270 + 0.0050
                 = 0.0428

Therefore, the probability that a randomly selected label produced by the company will contain a defective compact disk is 0.0428. Hence, the correct option is (d) 0.0428.

To know more about probability, refer to the link below:

https://brainly.com/question/30034780#

#SPJ11

The truth value of the expression (~(0 ~ 1) v 1) 0?1 is false.

To calculate the truth value of the expression, let's break it down step by step:

So, the truth value of the expression (~(0 ~ 1) v 1) 0?1 is false.

Learn more about Logic

brainly.com/question/2141979

#SPJ11

The constant A is equal to 4.903. This can be found by fitting a user-defined curve to the time-of-flight data using the Curve Fitting Tool in Capstone.

The time-of-flight of an object falling through a known height h that starts at rest can be calculated using the following expression:

t = √(2h/g)

where g is the acceleration due to gravity (9.8 m/s²).

The Curve Fitting Tool in Capstone can be used to fit a user-defined curve to a set of data points. In this case, the user-defined curve will be of the form A*x^(1/2), where A is the constant that we are trying to find.

To fit a user-defined curve to the time-of-flight data, follow these steps:

Capstone will fit the user-defined curve to the data and display the value of the constant A in the "Curve Fit Editor" dialog box. In this case, the value of A is equal to 4.903.

To know more about value click here

brainly.com/question/30760879

#SPJ11

Answer:

A - the table represents a nonlinear function because the graph does not show a constant rate of change

Step-by-step explanation:

you can tell this is true, because the y value does not increase by the same amount every time

Answer: 30 square units

Step-by-step explanation: In quadrilateral EFGH, sides FG ― and EH ― are parallel because they have the same slope. Sides EF ― and GH ― are parallel because they have the same slope. The area of quadrilateral EFGH is closest to 30 square units.

The sum of the first 5 term of the sequence 3,9,27 is 363.

Given the sequence in the question:

3, 9, 27

Since it is increasing geometrically, it is a geometric sequence.

Let the first term be:

a₁ = 3

Common ratio will be:

r = 9/3 = 3

Number of terms n = 5

The sum of a geometric sequence is expressed as:

[tex]S_n = a_1 * \frac{1 - r^n}{1 - r}[/tex]

Plug in the values:

[tex]S_n = a_1 * \frac{1 - r^n}{1 - r}\\\\S_n = 3 * \frac{1 - 3^5}{1 - 3}\\\\S_n = 3 * \frac{1 - 243}{1 - 3}\\\\S_n = 3 * \frac{-242}{-2}\\\\S_n = 3 * 121\\\\S_n = 363[/tex]

Therefore, the sum of the first 5th terms is 363.

Option B) 363 is the correct answer.

Learn more about geometric series here: brainly.com/question/19458543

#SPJ4

Answer:The interior angle of a polygon is given by

The exterior angle of a polygon is given by

where n is the number of sides of the polygon

The statement

The interior of a regular polygon is 5 times the exterior angle is written as

Solve the equation

That's

Since the denominators are the same we can equate the numerators

That's

180n - 360 = 1800

180n = 1800 + 360

180n = 2160

Divide both sides by 180

n = 12

I).

The interior angle of the polygon is

The answer is

150°

II.

Interior angle + exterior angle = 180

From the question

Interior angle = 150°

So the exterior angle is

Exterior angle = 180 - 150

We have the answer as

30°

III.

The polygon has 12 sides

IV.

The name of the polygon is

Dodecagon

Step-by-step explanation:

The final solution is: u(x,t) = Σ (-1)^n (2L)/(nπ)^2 sin(nπx/L) exp(-k n^2 π^2 t/L^2).

To solve the heat equation:

k ∂²u/∂x² = ∂u/∂t

subject to boundary conditions u(0,t) = 0, u(L,t) = 0, and initial condition u(x,0) = x,

we can use separation of variables method as follows:

Assume a solution of the form: u(x,t) = X(x)T(t)

Substitute the above expression into the heat equation:

k X''(x)T(t) = X(x)T'(t)

Divide both sides by X(x)T(t):

k X''(x)/X(x) = T'(t)/T(t) = λ (some constant)

Solve for X(x) by assuming that k λ is a positive constant:

X''(x) + λ X(x) = 0

Applying the boundary conditions u(0,t) = 0, u(L,t) = 0 leads to the following solutions:

X(x) = sin(nπx/L) with n = 1, 2, 3, ...

Solve for T(t):

T'(t)/T(t) = k λ, which gives T(t) = c exp(k λ t).

Using the initial condition u(x,0) = x, we get:

u(x,0) = Σ cn sin(nπx/L) = x.

Then, using standard methods, we obtain the final solution:

u(x,t) = Σ cn sin(nπx/L) exp(-k n^2 π^2 t/L^2),

where cn can be determined from the initial condition u(x,0) = x.

For this problem, since the initial condition is u(x,0) = x, we have:

cn = 2/L ∫0^L x sin(nπx/L) dx = (-1)^n (2L)/(nπ)^2.

Know more about heat equation here;

https://brainly.com/question/28205183

#SPJ11

Answer:

[tex]\begin{aligned} \textsf{(a)} \quad f(g(x))&=\boxed{x}\\g(f(x))&=\boxed{x}\end{aligned}\\\\\textsf{\;\;\;\;\;\;\;\;$f$ and $g$ are inverses of each other.}[/tex]

[tex]\begin{aligned} \textsf{(b)} \quad f(g(x))&=\boxed{-x}\\g(f(x))&=\boxed{-x}\end{aligned}\\\\\textsf{\;\;\;\;\;\;\;\;$f$ and $g$ are NOT inverses of each other.}[/tex]

Step-by-step explanation:

Given functions:

[tex]\begin{cases}f(x)=x-2\\g(x)=x+2\end{cases}[/tex]

Evaluate the composite function f(g(x)):

[tex]\begin{aligned}f(g(x))&=f(x+2)\\&=(x+2)-2\\&=x\end{aligned}[/tex]

Evaluate the composite function g(f(x)):

[tex]\begin{aligned}g(f(x))&=g(x-2)\\&=(x-2)+2\\&=x\end{aligned}[/tex]

The definition of inverse functions states that two functions, f and g, are inverses of each other if and only if their compositions yield the identity function, i.e. f(g(x)) = g(f(x)) = x.

Therefore, as f(g(x)) = g(f(x)) = x, then f and g are inverses of each other.

[tex]\hrulefill[/tex]

Given functions:

[tex]\begin{cases}f(x)=\dfrac{3}{x},\;\;\;\:\:x\neq0\\\\g(x)=-\dfrac{3}{x},\;\;x \neq 0\end{cases}[/tex]

Evaluate the composite function f(g(x)):

[tex]\begin{aligned}f(g(x))&=f\left(-\dfrac{3}{x}\right)\\\\&=\dfrac{3}{\left(-\frac{3}{x}\right)}\\\\&=3 \cdot \dfrac{-x}{3}\\\\&=-x\end{aligned}[/tex]

Evaluate the composite function g(f(x)):

[tex]\begin{aligned}g(f(x))&=g\left(\dfrac{3}{x}\right)\\\\&=-\dfrac{3}{\left(\frac{3}{x}\right)}\\\\&=-3 \cdot \dfrac{x}{3}\\\\&=-x\end{aligned}[/tex]

The definition of inverse functions states that two functions, f and g, are inverses of each other if and only if their compositions yield the identity function, i.e. f(g(x)) = g(f(x)) = x.

Therefore, as f(g(x)) = g(f(x)) = -x, then f and g are not inverses of each other.

The equation "t = 3w" represents inverse proportionality between t and w, where t is equal to three times the reciprocal of w.

To determine if t is inversely proportional to w, we need to check if there is a constant k such that t = k/w.

Let's evaluate each equation:

t = 3w

This equation does not represent inverse proportionality because t is directly proportional to w, not inversely proportional. As w increases, t also increases, which is the opposite behavior of inverse proportionality.

t = 3W

Similarly, this equation does not represent inverse proportionality because t is directly proportional to W, not inversely proportional. The use of uppercase "W" instead of lowercase "w" does not change the nature of the proportionality.

t = w + 3

This equation does not represent inverse proportionality. Here, t and w are related through addition, not division. As w increases, t also increases, which is inconsistent with inverse proportionality.

t = w - 3

Once again, this equation does not represent inverse proportionality. Here, t and w are related through subtraction, not division. As w increases, t decreases, which is contrary to inverse proportionality.

t = 3m

This equation does not involve the variable w. It represents a direct proportionality between t and m, not t and w.

Based on the analysis, none of the given equations exhibit inverse proportionality between t and w.

for such more question on proportional

https://brainly.com/question/870035

#SPJ8

The factory's total cost function is $20x - $50 and Average cost function is (20x - 50) / x

Henry works in a fireworks factory and can make 20 fireworks an hour. He earns $10 for the first five hours and $20 for each additional hour after that. The factory's total cost function is a linear function that has two segments. One segment will represent the cost of the first five hours worked, while the other segment will represent the cost of each hour after that.

The cost of the first five hours is $10 per hour, which means that the total cost is $50 (5 x $10). After that, each hour costs $20. Therefore, if Henry works for "x" hours, the total cost of his work will be:

Total cost function = $50 + $20 (x - 5)

Total cost function = $50 + $20x - $100

Total cost function = $20x - $50

Average cost is the total cost divided by the number of hours worked. Therefore, the average cost function is:

Average cost function = total cost function / x

Average cost function = (20x - 50) / x

Now, let's graphically depict the curves. The total cost function is a linear function with a y-intercept of -50 and a slope of 20. It will look like this:

On the other hand, the average cost function will start at $10 per hour and decrease as more hours are worked. Eventually, it will approach $20 per hour as the number of hours increases. This will look like this:

By analyzing the graphs, we can observe the relationship between the total cost and the number of hours worked, as well as the average cost at different levels of production.

Learn more about Average Cost

https://brainly.com/question/14415150

#SPJ11

The empirical rule provides three pieces of information about the sample that follows a skewed-right distribution:

1. Approximately 68% of the data falls within one standard deviation of the mean.

2. Approximately 95% of the data falls within two standard deviations of the mean.

3. Approximately 99.7% of the data falls within three standard deviations of the mean.

The empirical rule, also known as the 68-95-99.7 rule, is applicable to data that follows a normal distribution. Although it is mentioned that the sample follows a skewed-right distribution, we can still use the empirical rule as an approximation since the sample size is not specified.

1. The first piece of information states that approximately 68% of the data falls within one standard deviation of the mean. In this case, it means that about 68% of the data points in the sample would fall within the range of (66 - 17.9) to (66 + 17.9).

2. The second piece of information states that approximately 95% of the data falls within two standard deviations of the mean. Thus, about 95% of the data points in the sample would fall within the range of (66 - 2 * 17.9) to (66 + 2 * 17.9).

3. The third piece of information states that approximately 99.7% of the data falls within three standard deviations of the mean. Therefore, about 99.7% of the data points in the sample would fall within the range of (66 - 3 * 17.9) to (66 + 3 * 17.9).

These three pieces of information provide an understanding of the spread and distribution of the sample data based on the mean and standard deviation.

Learn more about skewed-right distribution here:

brainly.com/question/30011644

#SPJ11

Answer: SSS

Step-by-step explanation:

The lines on the triangles say that 2 of the sides are equal. Th triangles also share a 3rd side that is equal.

So, a side, a side and a side proves the triangles are congruent through, SSS

(e) The overall solution is given by the equation x(t) =  C1t^3 + C2/t^3,, where C1 and C2 are arbitrary constants.

(a) The Wronskian of x(1) and x(2) is given by:

W = | x1(t) x2(t) |

| x1'(t) x2'(t) |

Let's evaluate the Wronskian of x(1) and x(2) using the given formula:

W = | t 2t^2 | - | 4t t^2 |

| 1 2t | | 2 2t |

Simplifying the determinant:

W = (t)(2t^2) - (4t)(1)

= 2t^3 - 4t

= 2t(t^2 - 2)

(b) For x(1) and x(2) to be linearly independent, the Wronskian W should be non-zero. Since W = 2t(t^2 - 2), the Wronskian is zero when t = 0, t = -√2, and t = √2. For all other values of t, the Wronskian is non-zero. Therefore, x(1) and x(2) are linearly independent in the intervals (-∞, -√2), (-√2, 0), (0, √2), and (√2, +∞).

(c) Since x(1) and x(2) are linearly dependent for the values t = 0, t = -√2, and t = √2, it implies that the coefficients in the system of homogeneous differential equations satisfied by x(1) and x(2) are not all zero. At least one of the coefficients must be non-zero.

(d) The system of equations x': = 9t^2x is already given.

(e) The general solution of the differential equation x' = 9t^2x can be found by solving the characteristic equation. The characteristic equation is r^2 = 9t^2, which has roots r = ±3t. Therefore, the general solution is:

x(t) = C1t^3 + C2/t^3,

where C1 and C2 are arbitrary constants.

Learn more about  linearly independent

https://brainly.com/question/30575734

#SPJ11

Answer:

S₅₀ = 912.5

Step-by-step explanation:

the sum of n terms of an arithmetic sequence is

[tex]S_{n}[/tex] = [tex]\frac{n}{2}[/tex] [ 2a₁ + (n - 1)d ]

where a₁ is the first term and d the common difference

here a₁ = 6 and d = [tex]\frac{1}{2}[/tex] , then

S₅₀ = [tex]\frac{50}{2}[/tex] [ (2 × 6) + (49 × [tex]\frac{1}{2}[/tex]) ]

    = 25(12 + 24.5)

    = 25 × 36.5

    = 912.5

The general solution is the sum of the complementary and particular solutions: y(x) = y_c(x) + y_p(x) = c1 cos(4x) + c2 sin(4x) + ((1/16)x + 1/8) sin(4x) + (Cx + D) cos(4x).

y" + 16y = x sin(4x) using the method of undetermined coefficients-annihilator approach, we follow these steps:

Step 1: Find the complementary solution:

The characteristic equation for the homogeneous equation is r^2 + 16 = 0.

Solving this quadratic equation, we get the roots as r = ±4i.

Therefore, the complementary solution is y_c(x) = c1 cos(4x) + c2 sin(4x), where c1 and c2 are arbitrary constants.

Step 2: Find the particular solution:

y_p(x) = (Ax + B) sin(4x) + (Cx + D) cos(4x),

where A, B, C, and D are constants to be determined.

Step 3: Differentiate y_p(x) twice

y_p''(x) = -32A sin(4x) + 16B sin(4x) - 32C cos(4x) - 16D cos(4x).

Substituting y_p''(x) and y_p(x) into the original equation, we get:

(-32A sin(4x) + 16B sin(4x) - 32C cos(4x) - 16D cos(4x)) + 16((Ax + B) sin(4x) + (Cx + D) cos(4x)) = x sin(4x).

Step 4: Collect like terms and equate coefficients of sin(4x) and cos(4x) separately:

For the coefficient of sin(4x), we have: -32A + 16B + 16Ax = 0.

For the coefficient of cos(4x), we have: -32C - 16D + 16Cx = x.

Equating the coefficients, we get:

-32A + 16B = 0, and

16Ax = x.

From the first equation, we find A = B/2.

Substituting this into the second equation, we get 8Bx = x, which gives B = 1/8.

A = 1/16.

Step 5: Substitute the determined values of A and B into y_p(x) to get the particular solution:

y_p(x) = ((1/16)x + 1/8) sin(4x) + (Cx + D) cos(4x).

Step 6: The general solution is the sum of the complementary and particular solutions:

y(x) = y_c(x) + y_p(x) = c1 cos(4x) + c2 sin(4x) + ((1/16)x + 1/8) sin(4x) + (Cx + D) cos(4x).

learn more about  general solution

https://brainly.com/question/31491463

#SPJ11

Answer:  y =  -x² + 2x - 1

Step-by-step explanation:

y = −(x−1)(x−1)                             >FOIL first leaving negative in front

y = - (x² - x - x  + 1)                     >Combine like terms

y =  - (x² - 2x + 1)                        >Distribute negative by changing sign of

                                                  >everthing in parenthesis

y =  -x² + 2x - 1

An angle in standard position is an angle whose vertex is at the origin and whose initial side is on the positive x-axis. The measure of an angle in standard position is the angle between the initial side and the terminal side.

An angle with a measure of 180° is a straight angle. A straight angle is an angle that measures 180°. Straight angles are formed when two rays intersect at a point and form a straight line.

The terminal side of an angle with a measure of 180° lies on the negative x-axis. This is because the angle goes from the positive x-axis to the negative x-axis as it rotates counterclockwise from the initial side.

The angle measure is 180°, and the angle is a straight angle.

Learn more about angle in standard position here:

brainly.com/question/19882301

#SPJ11