The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants.
Answer:
Steel Wool + Oxygen, Steel wool has a hard texture but is a grayish color. It looks like it's a powder, and also that it was rusted steel wool and then broken apart converted into a powder. So Iron oxide is 7 grams and combined steel wool is 7 grams, so you may assume that the mass has been retained. Yeah, it is a chemical change since the corrosion and rust in steel wool is a chemical process, but iron oxide is triggered by a physical change.
Egg + Heat, In the center, the egg has a yellow yolk while at the edge of the egg there is a kind of liquid, but it is visible, the heat becomes hot but clear The egg transformed into a delicious food called an omelet, which was yolk staid as a liquid but got a little harder, It was retained because the eggshell was 4 grams and the fried egg is 41 grams, but the clear border around it changed color. It is a chemical transition, and it results in the creation of new particles and the chemical bonds split apart and new ones are formed
Water + Heat, Water is a clear liquid, while the heat is very hot yet transparent. Once 5 g of liquid is a gas, it'll become 5 g of water vapor. Water + Heat Water is really a clear liquid. The mass of the liquid water is simply transformed into mass of the water vapor that is freshly created. There was no chemical process although water vapor can also be converted back to water, but it only shifted from a liquid to a gas and the structure did not change.
Zinc + Hydrogen Chloride Zinc, a metal white/silver solid. A clear, colorless liquid fluid with a really low pH in hydrogen chloride In hydrogen chloride, zinc is “dissolved” while releasing a colorless vapor. The liquid, possibly still having a low pH from the remaining acid, stays a colorless liquid.As sparked with a burning wooden splint, the colorless gas gathered in a tube provides a loud bang, because it is neither air trapped in the zinc, nor absorbed in hydropower acids. Well, even if the zinc is 12 grams and not 15 grams, the gas released was 3 grams and, as we all know, 3 + 12 is 15, so you could claim also that volume has also been saved.
Sodium Hydroxide + Copper, Sulfate Sodium hydroxide is a turbid solution and bright blue crystals are formed from copper sulfate A pale blue powder of basic copper hydroxide a solution of neutral salt sulfuric acid would be produced when their solutions are mixed with each other. The combined sodium hydroxide and copper sulfate make a total of 67 grams and the product is split because the sodium sulfate is 47 grams and the copper hydroxide is 20 grams, but all together it is still 67 grams, and you could assume that now the mass has been conserved. The evidence of a response was its image of royal blue basic copper hydroxide precipitates and a neutral salt sodium solution
Explanation:
Which one of the following statements contain a simile?
Answer:
I don't know if its just me, but I don't see the statements so I'm not sure how to help answer your question.
A 4-kg object is moving with a speed of 5 m/s at a height of 2 m. The kinetic
energy of the object is approximately _J.
Hello!
[tex]\large\boxed{KE = 50J}[/tex]
Use the formula for kinetic energy:
[tex]KE = \frac{1}{2}mv^{2}[/tex]
Plug in the given mass and velocity:
[tex]KE = \frac{1}{2} (4)5^{2}[/tex]
Simplify:
[tex]KE = \frac{1}{2} (100)\\\\KE = 50 J[/tex]
1. You are hired to lift 25 kg crates a vertically 1.0 m from the ground onto a truck. How many crates would you have to load onto the truck in 1 minute for your average power output in lifting the crates to be 110 W
Answer:
The number of crate to be lifted is 27
Explanation:
Given;
mass of the crates, m = 25 kg
height in which the crate is lifted, h = 1.0 m
power output, P = 110 W
time to complete the task, t = 1 minutes = 60 s
The input energy is equal to the gravitational energy due to height the crate is lifted is given as;
E(input) = mgh
E(input) = 25 x 9.8 x 1
E(input) = 245 J
Output energy is given as;
E(output) = P x t
E(output) = 110 x 60
E(output) = 6600 J
Let the number of crate to be lifted = n
n x E(input) = E(output)
n x 245 = 6600
n = 6600 / 245
n = 27 crates
Which wave has high enough energy to cause damage to skin and sometimes cancer?
Answer: All UV can have harmful effects on biological matter (such as causing cancers) with the highest energies causing the most damage.
Explanation:
The scientific method can easily be misinterpreted as ___________. Question 1 options: a great magical trick, or slide of hands, rather than factual an "auto mechanics" guide to Science Investigation a "cookbook" recipe for performing scientific investigations the perfect method for finding the answers to all questions
Answer:
I think the answer is
a "cookbook" recipe for performing scientific investigations
Explanation:
3. Two balls are rolling toward each other. One has a momentum of 85kg*m/s, and the other has a momentum of -85kg*m/s. What will be the total momentum of the system after they collide? In what direction will they move after they collide if it is an inelastic collision? Answer:
Answer:
The total momentum is zero.
Explanation:
This problem can be solved by applying the momentum conservation theorem and the amount of motion. This theorem tells us that the amount of motion is conserved before and after a collision.
In the next equation, we will write to the left of the equal sign the amount of motion before the collision and to the right the amount of motion after the collision.
[tex](P_{1})-(P_{2})=P_{3}[/tex]
where:
P₁ = momentum of the ball moving to the right, before the collision = 85 [kg*m/s]
P₂ = momentum of the ball moving to the left, before the collision = - 85 [kg*m/s]
P₃ = Final momentum after the collision [kg*m/s]
[tex](85) - 85 = P_{3}\\P_{3}= 0[/tex]
There is no movement of any of the balls, they remain at rest after the impact.
A nearsighted person has a far point of 40cm. What power spectacle lens is needed if the lens is 2cm from the eye
Answer:
The value is [tex]p = - 2.63 \ Diopters[/tex]
Explanation:
From the question we are told that
The value of the far point is [tex]a = 40 \ cm = 0.4 \ m[/tex]
The distance of the lens to the eye is [tex]b = 2 \ cm = 0.02[/tex]
Generally
[tex]1 Diopter = > 1 m^{-1}[/tex]
Generally the power spectacle lens needed is mathematically represented as
[tex]p = \frac{1}{d_o } + \frac{1}{d_i}[/tex]
Here [tex]d_o[/tex] is the object distance which for a near sighted person is [tex]d_o = \infty[/tex]
And [tex]d_i[/tex] is the image distance which is evaluated as
[tex]d_i = b - a[/tex]
=> [tex]d_i = 0.02 - 0.4[/tex]
=> [tex]d_i = -0.38 \ m[/tex]
So
[tex]p = \frac{1}{\infty } + \frac{1}{-0.38}[/tex]
=> [tex]p = 0 - 2.63[/tex]
=> [tex]p = - 2.63 \ Diopters[/tex]
if a certain car, going with speed v1, rounds a level curve with a radius r1, it is just on the verge of skidding. if its speed is now doubled, the radius of the tightest curve on the same road that it can round without skidding is:
Answer:
The correct answer is 4R1
Explanation:
According to the given scenario ,the radius of the tightest curve on the same road without skidding is as follows:
As we know that
Centeripetal Acceleration is
= v^2 ÷ r
In the case when velocity becomes 2 times so the r would be 4 times
So, the radius of the tightest curve on the same road without skidding is 4R1
what are the different intensity of an earthquake
Ranking Earthquake Intensity
Magnitude Average number per year Modified Mercalli Intensity
2.0 – 2.9 >1 million I
3.0 – 3.9 about 100,000 II – III
4.0 – 4.9 about 10,000 IV – V
5.0 – 5.9 about 1,000 VI – VII
Explanation:
hope it helps
Mark as brainliest
and follow me for a follow back
A woman walks 5 meters due east in 12 seconds and then back 2 meters in 7 seconds due west. Determine the person’s velocities for the 5 meters, the 2 meters and the person’s average velocity for the whole walk.
Answer:
Due east - 0.42mps
Due west - 0.29mps
Explanation:
So for the 5 meters 12s
and 2 meters 7s
for the first one we will do 12/5 = 2.4
for the second one 7/2 = 3.5
that is the amount of seconds per meter but we want meters per seconds so
5/12 = 0.42mps
2/7 = 0.29mps
. Emily pushes a 38.8 kg grocery cart of groceries by exerting a 76.0 N force on the handle inclined at 40.0 degrees below the horizontal. What are:
a. The horizontal and vertical components of Emily’s force
b. The acceleration of the cart?
Answer:
a) [tex]F_{x} = 58.2 N[/tex]
[tex] F_{y} = 48.9 N [/tex]
b) a = 1.5 m/s²
Explanation:
a) The horizontal and vertical components of Emily's force can be found knowing the angle and the exerted force.
Since the handle is inclined at 40.0° below the horizontal we have:
[tex] F_{x} = |F|*cos(\theta) = 76.0 N*cos(40) = 58.2 N [/tex]
[tex] F_{y} = |F|*sin(\theta) = 76.0 N*sin(40) = 48.9 N [/tex]
b) The acceleration of the car can be calculated as follows:
[tex] F_{x} = ma [/tex]
We used the horizontal component of the force because the cart is moving in that direction.
[tex] a = \frac{F_{x}}{m} = \frac{58.2 N}{38.8 kg} = 1.5 m/s^{2} [/tex]
Hence, the acceleration of the car is 1.5 m/s².
I hope it helps you!
What is the period of an object that makes 6 revolutions a minute?
Answer:
T = 10 s
Explanation:
First, we need to find the frequency of the object as follows:
[tex]Frequency = f = \frac{Speed\ in\ rpm}{60}[/tex]
where,
Speed = Angular Speed = 6 rpm
Therefore,
[tex]f = \frac{6\ rpm}{60}\\\\f = 0.1\ Hz[/tex]
Now, for time period (T):
[tex]Time\ Period = T = \frac{1}{f}\\\\T = \frac{1}{0.1\ Hz}\\\\[/tex]
T = 10 s
HELP right awayyy !!!
Answer:
Question 4 is actually Acceleration
In the following figure, if AB ǁ CD, then find the measure of PCD and CPD.
Answer:
[tex]CPD = 80[/tex]
[tex]PCD = 44[/tex]
Explanation:
Given
[tex]AB || CD[/tex]
[tex]BAD = 56[/tex]
[tex]CPA = 100[/tex]
See attachment
Required
Determine PCD and CPD
First, we need to calculate CPD
Since DPA is a straight line and CPA = 100;
We have that:
[tex]CPA + CPD = 180[/tex] --- angle on a straight theorem
Substitute 100 for CPA
[tex]100 + CPD = 180[/tex]
Subtract 100 from both sides
[tex]100-100 + CPD = 180-100[/tex]
[tex]CPD = 80[/tex]
Next, we calculate PCD
We have that:
[tex]DAB= ADC = 56[/tex] --alternate angle
In triangle PCD
[tex]PCD + CPD + PDC = 180[/tex] --- angles in a triangle
Where
[tex]PDC = ADC = 56[/tex]
So, we have:
[tex]PCD +80 + 56 = 180[/tex]
[tex]PCD +136 = 180[/tex]
Subtract 136 from both sides
[tex]PCD = 180 - 136[/tex]
[tex]PCD = 44[/tex]
are aliens real in 2020
Answer:
i believe that they are or there's something out there
Explanation:
:)
A ball is thrown horizontally at a height of 1.5 meters at a velocity of 70 m/s. Assume no air resistance. How long until the ball reaches the ground?
0.25 s
0.38 s
0.55 s
0.67 s
Answer:
[tex]t = 0.55[/tex]
Explanation:
Given
[tex]Height, s = 1.5m[/tex]
[tex]Velocity, v = 70m/s[/tex]
Required
Determine the time to hit the ground
Using free fall formula:
[tex]S = \frac{1}{2}gt^2[/tex]
Take g as 9.8 and substitute value for S
[tex]1.5 = \frac{1}{2} * 9.8 * t^2[/tex]
[tex]1.5 = 4.9 * t^2[/tex]
Make t^2 the subject
[tex]t^2 = \frac{1.5}{4.9}[/tex]
[tex]t^2 = 0.30612244898[/tex]
Solve for t
[tex]t = \sqrt{0.30612244898[/tex]
[tex]t = 0.55[/tex] -- approximated
If a marble is dropped from a cliff, how fast is the marble going after falling for 3.6 seconds?
PLEEEEAAASSSEEEEEE HELPPPP MEEEE>
Answer:
35.28m/s
Explanation:
Given
Time t = 3.6secs
Required
Final speed v
Using the equation of motion;
v = u + gt
Substitute;
v = 0 + 9.8(3.6)
v = 0 + 35.28
v = 35.28m/s
Hence the speed of the marble is 35.28m/s
Both the pressure and volume of an ideal gas of diatomic molecules are doubled. The ratio of the new internal energy to the old both measured relative to the internal energy at 0 K is
Answer:
The ratio of the new internal energy to the old is 4
Explanation:
let the old pressure of the gas = P₁
let the old volume of the gas = V₁
then, the new pressure of the gas = 2P₁
the new volume of the gas = 2V₁
The internal energy of the gas is given as;
PV = nRT
PV = k
P₁V₁ = P₂V₂
[tex]\frac{P_2V_2}{P_1V_1} = \frac{2P_1\ \times \ 2V_1}{P_1V_1} =\frac{4}{1} = 4[/tex]
The ratio of the new internal energy to the old is 4
Energy stored because of an object's height above the Earth's surface is_____energy.
nuclear
gravitational
electrical or chemical
what is the main cause of seafloor spreading?
Answer:
As tectonic plates slowly move away from each other, heat from the mantle's convection currents makes the crust more plastic and less dense.
Explanation:
Answer: The main cause of sea floor spreading are the directions and force of the moving tectonic plates.
Explanation:
What causes the magnetic field around the wire?
Magnetic field
O A. An electric current
O B. An electric field
PREVIOUS
An electric current causes the magnetic field around the wire. The correct answer is A.
The magnetic field around a wire is caused by the flow of electric current through the wire. When an electric current passes through a wire, it generates a magnetic field that forms circular lines of magnetic flux around the wire. This phenomenon is described by Ampere's law, which states that a magnetic field is produced by an electric current and its strength is directly proportional to the magnitude of the current.
The relationship between the electric current and the magnetic field can be understood using the right-hand rule. If you wrap your right hand around the wire with your thumb pointing in the direction of the current, the curled fingers indicate the direction of the magnetic field lines.
Therefore, an electric field is generated by an electric charge, not by an electric current. While an electric field can exist around a wire if there is a potential difference (voltage) applied across it, it is the flow of electric current that primarily generates the magnetic field.
To learn more about the electric field click:
brainly.com/question/8971780
#SPJ1
A particular engine has a power output of 5 kW and an efficiency of 30%. If the engine expels 6464 J of thermal energy in each cycle, find the heat absorbed in each cycle. Answer in units of J.
Answer:
The heat absorbed in each cycle is 9,234.286 J
Explanation:
Given;
power output, P = 5 kW = 5,000 W
efficiency of the engine, e = 30 % = 0.3
thermal heat expelled, [tex]Q_c[/tex] = 6464 J
let the heat absorbed = [tex]Q_h[/tex]
The efficiency of the engine is given as;
[tex]e = \frac{W}{Q_h} = \frac{Q_h-Q_c}{Q_h} = \frac{Q_h}{Q_h} - \frac{Q_c}{Q_h} = 1-\frac{Q_c}{Q_h}\\\\e = 1-\frac{Q_c}{Q_h}\\\\0.3 = 1-\frac{Q_c}{Q_h}\\\\\frac{Q_c}{Q_h} = 1-0.3\\\\\frac{Q_c}{Q_h} = 0.7\\\\Q_h = \frac{Q_c}{0.7} \\\\Q_h = \frac{6464}{0.7} = 9,234.286 \ J.[/tex]
Therefore, the heat absorbed in each cycle is 9,234.286 J.
a 16-slug mass is raised by 10 ft. the PE of the mass increased by?
Answer:
The PE of the mass increased by 6,972.95 J
Explanation:
Gravitational Potential Energy
It's the energy stored in an object because of its vertical position or height in a gravitational field.
It can be calculated with the equation:
U=m.g.h
Where m is the mass of the object, h is the height with respect to a fixed reference, and g is the acceleration of gravity or 9.8 m/s^2.
We are given the mass of m=16 slug raised by a height h=10 ft. Both units will be converted to SI standard:
1 slug = 14.59 Kg, thus
16 slug = 16*14.59 Kg=233.44 Kg
1 ft = 0.3048 m, thus:
10 ft = 10*0.3048 m = 3.048 m
Thus, the PE of the mass increased by:
U = 233.44 * 9.8 * 3.048 = 6,972.95 J
the PE of the mass increased by 6,972.95 J
The potential energy will be "5120 ft.lb".
According to the question,
Mass,
m = 16 slugsHeight,
h = 10 ftAs we know the formula,
→ [tex]U = mgh[/tex]
By substituting the values, we get
→ [tex]= 16\times 32\times 10[/tex]
→ [tex]= 5120 \ ft.lb[/tex]
Thus the response above is correct.
Learn more:
https://brainly.com/question/13347447
What is the purpose of a resistor
Answer:
So we can have energy for electronics. It limits the flow of electric current
Explanation:
It’s in the answer!
Answer:
Basically, the function of a resistor is always to oppose the flow of current through it and the strength of this opposition is termed as its resistance.
if a block weight 60N and is lying on a side with area 2m by 3m. what is the pressure exerted on the surface?
Answer:
10 Pa
Explanation:
Pressure is defined as force per unit area.
Mathematically, P= F/A where P is pressure, F is force and A is area.
Force, F = 60 N
Area, A = 2*3 = 6m²
P = 60/6 = 10 Pa
What's the quantum number for a particle in an infinite square well if the particle's energy is 64 times the ground-state energy?
Answer:
8
Explanation:
The energy levels is given as
E(n) = n² * h² / ( 8 * m * L²), where
n = 1, 2, 3, 4,... etc
At ground state energy (n = 1), therefore is E(g) = h² / (8 * m * L²).
We can then say that
E(n) = n² * Eg
Therefore, to have E = 64 Eg, we must have n² = 64. And for n² to be equal to 64, we find the square root of n
n = √64
n = 8
Essentially, the needed quantum number is 8
If earth squeezed to the size of moon.Calculate the weight of 100kg mass in the squeezed earth.
Answer:
833.9kg that's the answer
Two wave pulses pass each other on a string. The pulse traveling toward the right has positive amplitude, whereas the pulse traveling toward the left has equal amplitude in the negative direction. What happens when they occupy the same region of space at the same time?
a. constructive interference occurs
b. destructive interference occurs.
c. a standing wave is produced.
d. a traveling wave is produced.
e. a wave pulse is produced.
Answer:
destructive interference occurs
Is electricity matter?
EXPLAIN.
Answer:
Yes it is matter
Explanation:
In physics, usually the word "electricity" isn't really used. "Electric current" is more common, and is defined as the flow of charges, where the charges are held by particles (electrons). Electrons have mass, so they are definitely matter.
An object 2.7 cmtall is placed12 cmin front of a mirror. •What type of mirror and what radius of curvature are needed to createan upright image that is 5.4 cm in height? •What is the magnification of the image?
Answer:
a. Concave mirror, radius of curvature = 16 cm b. magnification = 2
Explanation:
a. Since the image is upright and larger than the object, we need a concave mirror.
We know image height, h'/object height, h = -image distance, d'/object distance, d
h'/h = -d'/d
Using the real is positive convention,
h'= + 5.4 cm, h = + 2.7 cm and d = + 12 cm.
So, + 5.4 cm/+ 2.7 cm = -d'/+ 12 cm
2 = -d'/12
d' = -2 × 12 cm
= -24 cm
Using the mirror formula 1/d + 1/d' = 2/r where r = radius of curvature of the mirror
1/+12 + 1/- 24 = 2/r
1/12(1 - 1/2) = 2/r
1/12(1/2) = 2/r
1/24 = 2/r
r/2 = 24
r = 2 × 24
r = 48 cm
b.
magnification = image height, h'/object height,h = + 5.4 cm/+ 2.7 cm = 2