Pls help
The Q : Look at your recorded results and models for both the man and the boy. How close are the coefficients of friction for the sled on ice for two runs? How confident would you feel about specifying a coefficient of kinetic friction for this sled on this ice surface, based on these results? What other variables might impact this coefficient result?
Answers
Newton's second law, kinematics and graphic analysis we can find the results for the questions about the movement of the trine are:
The friction coefficients are man is0.8 and for the boy is0.98, the relationship between them is 0.82 The results are very accurate after the graphical analysis. The wind is a very important factor in the calculations that is not taken into account.Second law of Newton.
Newton's second law establishes a relationship between the net force, the mass and the acceleration of the body. In the attachment we can see a free body diagram which is a schematic of the forces without the details of the bodies.
N-W = 0
fr = ma
where N is the normal, W the weight of the body, fr the friction force, m the mass and a the acceleration
The friction force is a macroscopic representation of the interactions between the two surfaces, it is given by the expression
fr = μ N
where μ is the coefficient of friction between the two surfaces.
We substitute
μ mg = m a
a = μ g
Kinematics and graphic analysis.
Kinematics study the movement of bodies, looking for relationships between position, speed and acceleration.
v= v₀ – at t
In this case they give tables and graphs with the values of time and speed, where we can see that the relationship is a straight line that has as equation
y = ax +b
Where y is the dependent variable, x is the independent variable, a is the slope, and b is the cutoff point.
If we relate the two equations:
The independent variable x → time. The dependent variable y → speed. The cutoff point b → the initial velocity. The slope (a) is:a = mug
μ = [tex]\frac{a}{g}[/tex]
Using linear regression the slope and cutoff point is:
The man.
The slope is a = -0.8 m/s² and the cut-off point b= 4.86 m/s.
Let's calculate the coefficient of friction.
μ = [tex]\frac{0.8}{9.8}[/tex]
μ = 0.082
The child.
The slope is a = -0.98 m/s² and the cut-off point b= 4.72 m/s.
We calculate the coefficient of friction.
μ = [tex]\frac{0.98}{9.8}[/tex]
μ = 0.1
The relationship between the two coefficients of friction is
[tex]\frac{\mu_{man} }{\mu_{boy}} = \frac{0.082}{0.1}[/tex]
[tex]\frac{\mu_{man}}{\mu_{boy}} = 0.82[/tex]
The results are very exact since there are values of several points in the route and the graphical analysis gives the best possible value for all the points.
There are some variables not taken into account, one of the most important is friction with the wind and wind speed.
In conclusion using Newton's second law, kinematics and graphic analysis we can find the results for the questions about the movement of the trine are:
The friction coefficients are man is0.8 and for the boy is0.98, the relationship between them is 0.82 The results are very accurate after the graphical analysis. The wind is a very important factor in the calculations that is not taken into account.
Learn more about kinematics and graphical analysis here: brainly.com/question/11579754
Related Questions
Why does refraction occur?
A. Light travels through different materials at different speeds.
B. Different colors of light travel at different speeds.
C. Different materials physically twist light around.
D. Light from different sources travels at different rates.
Answers
Answer:
The answer is C.
Explanation:
Let's take a glass of water as an example. Now, shine a flashlight on it. See it bend the light into a rainbow? That is a example of refraction. When the light enters the water, the water actually slows down and changes its direction, causing the light to come out the other side in a different way. Since water is very dense, it can bend the water and make it different.
OMEWORK EXERCISE: DESIGNING AN INVESTIGATION USING SCIENTIFIC METHOD:
Observation: Mrs. Ntuli has two different kinds of pots in her kitchen. The food always seems to
cook quicker when she uses the aluminum pots than when she uses the enamel pots.
Write a scientific report with the following headings:
• Hypothesis
Aim
Apparatus
Variables
Method
Results (including a suitable graph)
Conclusion
Evaluation
Answers
Answer:
Aim: To investigate which material of pot will cook food quicker.
Hypothesis: The (aluminum/enamel) pots will cook the food quicker than the (aluminum/enamel) pots.
Apparatus:
- Aluminum pots
- Enamel pots
- Stove top
Variables:
Independent variable (What will be changed) - Material of pot
Dependent variable (What's being measured) - Time taken for food to cook
Controlled variables (What's staying the same) - Size of pot, type of food being cooked, quantity of food being cooked, stove top
Method:
Place aluminum pot on stove top and turn on stove topCook your chosen food in the potRecord time taken for food to cookRepeat steps 1-3 another 2 timesPlace enamel pot on stove top and turn on stove topCook chosen food in the potRecord time taken to cookRepeat steps 5-7 another 2 timesResults: (I don't have results because i never conducted this experiment)
Conclusion: This experiment showed that (aluminum/enamel) pots cooked the food quicker than (aluminum/enamel pots). These results (supported/rejected) my hypothesis.
Evaluation: (Never did the experiment, so there's nothing to evaluate)
Explanation:
I hope this helps :)
Sulfur dioxide is used to retain the color of fruit after drying. What is the chemical formula of this covalent compound? S1O2 SO2 S2O SO
Answers
Explanation:
SO2 is the best answer
please give brainliest and helpful
Answer: SO2
Explanation:
Very briefly describe the way an electromagnet works.
(Real answers only or you will be reported. Thanks to those who help).
Answers
Answer:
Because the electromagnet is made up of moving coils, when an electric current passes through, the coils act like a magnet.
Explanation:
Calculate the gravitatiional force between a 1 kg mass on the earth and the moon (mass = 7.4 x 10^22 kg) The distance between the two bodies is 3.8 x 10^5 km. Show all your work.
Answers
Explanation:
Given that,
The mass of an object, m = 1 kg
The mass of Earth, [tex]m_e=6\times 10^{22}\ kg[/tex]
The mass of Moon, [tex]m_m=7.4\times 10^{22}\ kg[/tex]
The distance between the two bodies, [tex]d=3.8\times 10^5\ km =3.8\times 10^8\ m[/tex]
The gravitational force between the object and the earth,
[tex]F=\dfrac{Gmm_e}{d^2}\\\\=\dfrac{6.67\times 10^{-11}\times 1\times 6\times 10^{22}}{(3.8\times 10^8)^2}\\\\=2.77\times 10^{-5}\ N[/tex]
The gravitational force between the object and the Moon,
[tex]F=\dfrac{Gmm_m}{d^2}\\\\=\dfrac{6.67\times 10^{-11}\times 1\times 7.4\times 10^{22}}{(3.8\times 10^8)^2}\\\\=3.41\times 10^{-5}\ N[/tex]
Hence, this is the required solution.
What is the kinetic energy of a 25kg object moving at a velocity of 2.5 m/s
Answers
Answer:
78j
Explanation:
78.125J to be exact
Which of the following has the most kinetic energy?
A. stretching a rubber band
B. a jet flying through the air
C. throwing a paper airplane
D. pitching a baseball
Answers
Throwing an paper airplane & A jet flying through the air.
Question 3 of 25 What is the period of a wave that has a frequency of 3 Hz?
Answers
Answer:
use the formula
Explanation:
F = 1/ T
where F stands for frequency and T stands for period
sub in 3 Hz into frequency
3 = 1/T
0.333 = T
or in a fraction form
1/ 3
hope this helps
Answer:
the answer is 0.3 s
Explanation:
Question 2 10 points)
Blueprints were used in the year
Answers
Answer:
1842.
Explanation: Blueprints were invented a generation before the Civil War by John Herschel, a chemist, astronomer, and photographer, in 1842.
Determine Average Speed.
Total distance = 800 mi
Total time = 10 hr
Answers
Explanation:
Average Speed.=Total distance/Total time=800/10=80m/hour
Describe how computer climate models help scientists understand possible future climate changes. How reliable are these computer models in making predictions about global warming? Discuss any limitations in these models.
Answers
Now a new evaluation of global climate models used to project Earth's future global average surface temperatures over the past half-century answers that question: most of the models have been quite accurate.
Answer:
To predict future climate, scientists use computer programs called climate models to understand how our planet is becoming different. Climate models work like a laboratory in a computer. They allow scientists to study how the unlike factors interact to influence a region's climate.
Now a new evaluation of global climate models used to project Earth's future global average surface temperatures over the past half-century answers that question: most of the models have been reasonably accurate.
Explanation:
I got a 100% on this assignment copy it and put it on your notes then go sentence by sentence copy but dont highlight any "." you will not be able to paste it into the box add the "." after you paste it, it one sentence.
ONE SENTENCE AT A TIME NO ". ' - or :" AT ALL
What is the effect of temperature on the solubility of a solid in a liquid? Check all correct elements that you included in your question. format: "What is the effect of X on Y?" materials: solid dissolved in a liquid independent variable: temperature dependent variable: solubility
Answers
Answer:
materials: solid dissolved in a liquid
independent variable: temperature
Explanation:
I got it right
A 1.30 kg ball is attached to a ceiling by a
1.93 m long string. The height of the room is
3.41 m.
The acceleration of gravity is 9.81 m/s^2.
What is the gravitational potential energy
associated with the ball relative to
a) the ceiling?
b.)the floor?
c.)a point at the same elevation as the ball?
(answer in J)
Answers
Answer:
A
Explanation:
Put A, It will help you.
Which of the following areas of the sun is where energy is transferred very slowly, sometimes taking up to 100,000 years, by electromagnetic radiation?
A. the radiation zone
B. the core
C. the convection zone
D. the solar flares
Answers
Can someone pls help me. WILL MARK U BRAINLIEST!!!
Answers
ILL GIVE BRAINLIEST !!!!!!!!!!! Do some research, and look up the difference between the zinc-carbon battery described on the
previous page, and the alkaline battery (shown at the left), which is another common dry cell that we
use every day. What are the electrodes made of in the alkaline battery? The electrolyte? Does one type
have an advantage over the other?
Create a few paragraph essay describing your findings to your teacher.
Answers
Answer:
The alkaline battery gets its name because it has an alkaline electrolyte of potassium hydroxide instead of the acidic ammonium chloride or zinc chloride electrolyte of the zinc-carbon batteries. An electrolyte is a substance that produces an electrically conducting solution when dissolved in a polar solvent, such as water. The dissolved electrolyte separates into cations and anions, which disperse uniformly through the solvent. Electrically, such a solution is neutral.Advantages. One of the advantages of alkaline batteries over other primary batteries and rechargeable batteries is that it has higher energy density. It has longer shelf life than batteries with chloride-type electrolyte. It could last to up to seven years unused, losing about five percent of its energy every year.
Explanation:
anyone know the answer?
Answers
Answer:
closed
Explanation:
sorry if I'm wrong
1. A visitor to the observation deck of a skyscraper manages to drop a penny over the edge. As the penny falls faster, the force due to air resistance increases. How does this affect the acceleration of the penny?
The acceleration remains zero.
The acceleration remains constant and not zero.
The acceleration increases.
The acceleration decreases.
2. A plane flies along a straight line path after taking off, and it ends up 90.0 km farther east and 200.0 km farther north, relative to where it started. In what direction did it fly on the straight line path?
66° north of east
27° north of east
45° north of east
24° north of east
Please explain your answer :)
Answers
Answer:
Its either 24 or 27 I'm confident its 24 my explanation is that from estimate it's near the 20s
If you are in a car that is being pulled down a 56 m path with a force of 12.5
N, what is the work being done?
Answers
Answer:
answer is 700 joules
Explanation:
work is equal to force into displacement
W=12.5*56
700 joules
A vector has an x-component
of 6.15 m and a y-component
of -3.88 m.
Find the magnitude of the
vector.
Answers
Answer:
please find attached file
Explanation:
The magnitude of the vector is 7.27m .
What is magnitude of a vector?The magnitude of a vector is the numerical value of the vector. It is represented by the length of the vector.
When a vector is resolved in two components then it is given by formula,
[tex]A = \sqrt{Ax^{2}+Ay^{2} }[/tex]
Here,
[tex]A_{x} = 6.15\\A_{y} = 3.88[/tex]
A = [tex]\sqrt{6.15^{2}+3.88^{2}[/tex]
A = 7.27m
Hence magnitude of the vector is 7.27m .
To know more about vector here
https://brainly.com/question/13322477
#SPJ2
What is the force on a 1000 kg elevator that is falling freely at 9.8 m/ sec²?
Answers
Answer:
f=m.a 1000*9.8=9800newton
Which has a larger acceleration, a car or a person running?
Answers
Answer:
A car
Explanation:
It is recommended to use air container for storing oil for long time . Give scientific reason.
Answers
A phonograph record 0.15 m in its radius rotates 18 times per 90 seconds what is the frequency?
Answers
Answer:
The frequency of the phonograph record is 0.2 Hz
Explanation:
The frequency of an object moving in uniform circular motion is the number of completed cycles the object makes in a specified time period
The given parameters of the phonograph record are;
The radius of the record = 0.15 m
The number of times the phonograph record rotates, n = 18 times
The time it takes the phonograph record to rotate the 18 times, t = 90 seconds
The frequency of the phonograph record, f = (The number of times the phonograph record rotates) ÷ (The time it takes the phonograph record to rotate the 18 times)
∴ The frequency of the phonograph record, f = n/t = 18/(90 s) = 0.2 Hz
The frequency of the phonograph record = 0.2 Hz.
Ammonia is a covalent compound used in many cleaners. What is its chemical formula? N2O H2O NH3 HO3
Answers
Explanation:
NH3 is the correct answer
please give brainliest and helpful
When a baseball is thrown straight upward, what is its acceleration at its greatest height? Please explain your answer.
9.8 m/s2 downward
9.8 m/s2 upward
9.8 m/s2 horizontally
0 m/s2
Answers
Answer: A
Explanation:
The acceleration of gravity is always 9.8 m/s^2 downwards, even if the velocity is 0 m/s.
HELPP!! what is not true about mitosis??
A. The chromosomes in the daughter cells half the number from the parent cell.
B. The chromosomes in the daughter cells are the same number as the parents cell.
C. Each nuclei is identical to the parent nucleus.
D. The four main stages are prophase,metaphase,anaphase, and telophase.
Answers
Answer:
I think its A
Explanation:
Rafael lives near a road at the bottom of the hill. His parents are concerned that soil will wash off the hill and rocks will fall onto the road. Rafeal converts an investigation to find out if grass growing on a hillside will help stop soil erosion. He collects two samples of the same size and type of soil. One sample of soil has grass growing on it and the other does not. He places each sample of soil in a small tray. For his investigation, Rafael pours the same amount of water onto both samples of soil. He uses a large tray to collect water that may flow through the soil. Which practice shows the best way for Rafael to set up this investigation?
Answers
Answer:
The first picture/option
Explanation:
The first picture/option shows the best way for Rafael to set up the investigation.
The experimental set-up must be in a sloppy position in order to simulate the condition that is characteristic of the bottom of the hill where he stays. Hence, the two soil samples must be tilted in order to determine if the grass can help to stop the washing down of the soil from the top of the hill.
The two options following the first option do not fulfill the condition of the same treatment. Both soil samples must be subjected to the same treatment condition in order for the outcome to be valid. The last option could have also been admissible but did not simulate the hill/slope conditions of where Rafael stays.
To set up his investigation on whether grass can help stop soil erosion on a hillside, Rafael can follow these steps: 1. Collect two samples of the same size and type of soil. This ensures that the only difference between the two samples is the presence of grass.
2. Place each sample of soil in a small tray. This allows Rafael to contain the soil and prevent it from mixing with each other.
3. Pour the same amount of water onto both samples of soil. This ensures that the water input is consistent for both samples, allowing Rafael to compare the effects of grass on soil erosion.
4. Use a large tray to collect water that may flow through the soil. This allows Rafael to measure and compare the amount of water runoff from both samples. By collecting the water, Rafael can determine if the grass on the hillside helps to retain more water and prevent soil erosion.
By following these steps, Rafael can compare the water runoff and soil erosion between the sample with grass and the sample without grass. This will provide him with evidence to determine if grass can effectively help stop soil erosion on a hillside.
To learn more about soil erosion, visit here
https://brainly.com/question/29091356
#SPJ11
A football player is tackled by another player and lands with the combined weight of both players on his knee. If the combined weight of the players is 2400 N and the player's knee measures 0.1 m by 0.1 m, how much pressure is exerted on the turf when the player lands on his knee?
Answers
Answer:
the pressure exerted on the turf when the player lands on his knee is 240,000 N/m².
Explanation:
Given;
combined weight of the players, F = 2400 N
measurement of the player's knee = 0.1 m by 0.1 m
The area of the player's knee is calculated as;
A = 0.1 m x 0.1 m = 0.01 m²
The pressure exerted on the turf when the player lands on his knee is calculated as;
P = F / A
P = (2400 N) / (0.01 m²)
P = 240,000 N/m²
Therefore, the pressure exerted on the turf when the player lands on his knee is 240,000 N/m².
Which is not an Ultimate Frisbee rule?
Answers
Step by step explanation