Answer: The [tex]E_{cell}[/tex] is 0.63 V
Explanation:
In the given reaction :
[tex]Zn(s)+Pb^{2+}(aq)\rightarrow Zn^{2+}(aq)+Pb(s)[/tex]
Here Zn undergoes oxidation by loss of electrons, thus act as anode. Lead undergoes reduction by gain of electrons and thus act as cathode.
[tex]E^0_{cell}=E^0_{cathode}- E^0_{anode}[/tex]
Where both [tex]E^0[/tex] are standard reduction potentials.
[tex]E^0_{[Pb^{2+}/Pb]}= -0.13V[/tex]
[tex]E^0_{[Zn^{2+}/Zn]}=-0.76V[/tex]
[tex]E^0_{cell}=E^0_{[Pb^{2+}/Pb]}- E^0_{[Zn^{2+}/Zn]}[/tex]
[tex]E^0_{cell}=-0.13-(-0.76)=0.63V[/tex]
Thus the [tex]E_{cell}[/tex] is 0.63 V
Does anybody know how to do q4. Please show working out thanks.
Answer:
% purity of limestone = 96.53%
Explanation:
Question (4).
Weight of impure CaCO₃ = 25.9 g
Molecular weight of CaCO₃ = 40 + 12 + 3(16)
= 100 g per mole
We know at S.T.P. number of moles of CO₂ = 1 and volume = 22.4 liters
From the given reaction, 1 mole of CaCO₃ reacts with 1 mole or 22.4 liters of
CO₂.
∵ 22.4 liters of CO₂ was produced from CaCO3 = 100 g
∴ 1 liter of CO₂ will be produced by CaCO₃ = [tex]\frac{100}{22.4}[/tex]
∴ 5.6 liters of CO₂ will be produced by CaCO₃ = [tex]\frac{100\times 5.6}{22.4}[/tex]
= 25 g
Therefore, % purity of CaCO₃ = [tex]\frac{\text{Weight calculated}}{{\text{Weight given}}}\times 100[/tex]
= [tex]\frac{25}{25.9}\times 100[/tex]
= 96.53 %
write these numbers rounded to the three nearest significant figures
Answer:
(a) 52.2 mL helium
(b) 18.0 g nitrogen
(c) 78.5 mg MSG
(d) 23,600,000 mm wavelength
(e) 0.00420 kg lead
Rounded the numbers to three nearest significant figures.
What are the percent compositions of hydrogen and oxygen in water
Answer:
H % = 11.11%
O % = 88.89%
Explanation:
atomic weight of H = 1
atomic weight of O = 16
each molecule of water contains 2 atoms of H and one atom of O
hence molecular weight of water = 18
H % = 2 x 100/18 = 11.11%
O % = 16 x 100/18 = 88.89%
Answer:
-H= 11.19%
-O= 88.81%
Explanation: the answer above mine is incorrect!, i just did it and i got it right, the answer is h= 11.19% and O= 88.81% hope it helps!
1. The atomic number of an element is 23 and its mass number is 56.
a. How many protons and electrons does an atom of this element have?
b. How many neutrons does this atom have?
Answer:
23 protons, 23 electrons, 33 neutrons
Explanation:
I don't know why my answer got deleted but no worries, I can answer again. The number of protons and electrons is equal to the atomic number which is 23 and the number of neutrons is 56 - 23 = 33 because atomic mass denotes the number of protons and neutrons.
help me with this
hurricans are most likely to hit the gulf of Mexico and the Caribbean is this classified as weather or climate please answer
Answer
Climate, because this describes what the weather is like over a long period of time.
An incompressible Newtonian fluid is brought to flow in a pipe by pulling a wire in the center at a velocity of 18 cm/s. The wire has a diameter of 5 cm, while the stationary pipe has a diameter of 10 cm. Calculate the shear stress(tre) in the fluid using Newtonian's law of viscosity. The flow is isothermal at °25 and the fluid has a viscosity of 3.0 cp. Provide the sketch of the velocity profile.
Answer:
The shear stress is 2.16 Pa
Explanation:
Newton's law of viscosity can be expressed as follows;
[tex]\tau =\mu \times \dfrac{dv}{dy}[/tex]
Where:
τ = Shear stress in the fluid
Given that the diameter of the wire = 5 cm
The velocity of the wire = 18 cm/s
The diameter of the pipe = 10 cm
The fluid viscosity, μ = 3.0 cp = 1×10⁻³· Pa·s
The change in velocity from the surface of the wire to the internal surface of the pipe = dv = 18 cm/s
The change in the y (perpendicular) direction of motion of the fluid from the surface of the wire to the interior surface of the tube = dy = 10/2 - 5/2 = 2.5 cm
By putting in the values, we have;
[tex]\tau =0.3 \times \dfrac{18}{2.5} = 2.16 \ Pa[/tex]
The shear stress = 2.16 Pa
2N2H4+ N2O4———3N2+4H2O SalmaKhan99 avatar How many grams of N2 gas will be formed by reacting 100g of N2H4 and 200g of N2 Kindly answer please
Answer:
131.26 g
Explanation:
From the balanced equation,
2 moles of N₂H₄reacts with 1 mole of N₂O₄ to give 3 moles of N₂
Now number of moles of N₂H₄ present in 100 g N₂H₄ is n = 100 g/molar mass N₂H₄.
Molar mass N₂H₄ = 2 × 14.01 g/mol + 1 × 4 g/mol = 28.02 g/mol + 4 g/mol = 32.02 g/mol
n₁ = 100/32.02 = 3.123 mol
Also
Now number of moles of N₂O₄ present in 200 g N₂O₄ is n = 200 g/molar mass N₂O₄.
Molar mass N₂O₄ = 2 × 14.01 g/mol + 16 × 4 g/mol = 28.02 g/mol + 64 g/mol = 92.02 g/mol
n₂ = 200/92.02 = 2.173 mol
Since the mole ratio of N₂H₄ to N₂O₄ is 2 : 1, We require 2 × 2.173 mol N₂H₄ to react with 2.173 mole N₂O₄
Number of moles of N₂H₄ required is 4.346. But the number of moles of N₂H₄ present is 3.123 so N₂H₄ is the limiting reagent.
So, from the equation, 2 moles of N₂H₄ produces 3 moles of N₂
Therefore number of mole N₂ = 3/2 moles of N₂H₄ = 3/2 × 3.123 mol = 4.6845 mol
From n = m/M where n = number of moles of nitrogen gas = 4.6845 mol and M = molar mass of nitrogen gas = 28.02 g/mol and m = mass of nitogen gas.
m = nM = 4.6845 mol × 28.02 g/mol = 131.26 g
So the mas of nitrogen gas produced is 131.26 g
Silver is composed of a single type of atom and cannot be broken down into different substances. Silver is an example of a(n)
ОА.
element
ОВ.
compound
molecule
when a substance goes directly from a solid state to a gas state as dry ice
Answer:
Sublimation
Explanation:
Sublimation refers to the process by which the change of matter takes place directly from solid to liquid state. The matter from the solid-state directly changes into the gaseous state without changing into the liquid state. More energy is required in this process. This is an endothermic reaction. Dry ice is the solid carbon dioxide sublimes in the air.
Study the reactions for the formation of compounds from their elements. I. C(s) + O2(g) → CO2(g) ΔHf = −394 kJ II. H2(g) + 12O2(g) → H2O(l) ΔHf = −242 kJ III. 2C(s) + 3H2(g) → C2H6(g) ΔH =−84 kJ The combustion of C2H6 is shown by the following equation: C2H6(g) + 72O2(g) → 2CO2(g) + 3H2O(l) Which option correctly gives the enthalpy of combustion of 0.2 moles of C2H6(g)? −1,430 kJ 286 kJ −286 kJ 1,430 kJ Exam 3 Click on the numbers to jump from one question to another. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Answer:
The correct option is -286 kJ
Explanation:
The given parameters are
C(s) + O₂(g) → CO₂(g) ΔHf = -394 kJ
H₂(g) + 12O₂(g)→H₂O ΔHf = -242 kJ
2C(s) + 3H₂(g)→C₂H₆(g) ΔH = -84 kJ
Te given equation is C₂H₆(g) + 7/2O₂(g) →2CO₂(g) + 3H₂O(l)
The heat of formation or enthalpy of combustion = Heat of formation of the products - Heat of formation of the reactants
The enthalpy of combustion of the reaction = 2*(-394) + 3*(-242)- ((-84)+7/2*0)) = -1,430 kJ
Given that the reaction consists of one mole of C₂H₆(g), we have;
The enthalpy of combustion of one mole of C₂H₆(g) = -1,430 kJ
Therefore, the enthalpy of combustion of 0.2 mole of C₂H₆(g) = -1,430 kJ × 0.2 = -286 kJ
The correct option = -286 kJ.
Answer:
Positive 1,430
Explanation:
Explain the methods of passive transport that move molecules across the plasma membrane of the cell.
What does it mean if something is insoluble?
A. It releases a gas upon reacting.
B. It will not dissolve in water.
C. It exists in a liquid state.
D. It is not reactive,
Answer:
It will not dissolve in water.
Explanation:
You're welcome
If something is insoluble it means that it will not dissolve in water. Therefore, option B is correct.
What is solubility?Solubility can be defined as the maximum amount of Solute that can dissolve in a known solvent at a particular temperature. By changing the temperature of the solution, we can increase the solubility of a substance. Sparingly soluble solids or liquids can be fully liquified by increasing the temperature.
Solubility depends on the nature of the given solute and the solvent. Substances such as sugar, NaCl, etc dissolve in water while substances such as naphthalene can not dissolve in water.
An insoluble substance can be defined as a substance or solid that will not dissolve in a solvent even after mixing such as sand. For example, Sand, Stones, Oil, Flour, and wax. Examples, of soluble things, are Salt, Sugar, Vinegar, Coffee, and Lemon Juice.
Learn more about solubility, here:
brainly.com/question/8591226
#SPJ2
Determine the molar mass of water (H2O) using the periodic table. Express your answer to the correct number of significant figures. The molar mass of water is grams/mole.
Answer:
18.015
Explanation:
That other guy is on something, their answer didn't relate to the question at all. Anyways.. Jesus loves YOU!
Here is the answer in picture form
What ion is formed when an atom of mercury (Hg) loses two electrons?
Hg–1
Hg–2
Hg+1
Hg+2
Answer: Hg +2
Explanation:
Hg+2 is formed when mercury loses two electrons.
Hg ------> Hg +2 + 2 e-
Answer:
Hg+2 (D) is the correct answer
Explanation:
the person above me is correct, hope this helps, have a good one
Which of the following reactants can oxidize sodium?
lithium
barium
aluminum
potassium
Answer:
The answer is Aluminum
Hope this helps you
DNA Mutations
Pre-Test
Active
1
A mutation causes a dog to be born with a tail thatis shorter than normal.
Which best describes this mutation
Answer:
Explanation:
A
What are the masses of subatomic particles in their atomic mass unit
Answer:
Subatomic particles are the proton (1 amu), neutron (1 amu), and electron (0 amu)
Explanation:
Atomic mass unit (amu; dalton): A unit of mass equal to exactly 1/12 the mass of one 12C atom, or 1.660538921 x 10−27 kg. This is the approximate mass of one proton or one neutron. It is the basis of atomic weights.
Answer:
[tex]\boxed{\mathrm{see \: below}}[/tex]
Explanation:
Protons have a mass of 1 amu (atomic mass unit).
Electrons have a mass of [tex]\frac{1}{1840}[/tex] amu (atomic mass unit).
Neutrons have a mass of 1 amu (atomic mass unit).
When sound molecules stack up" in front of high-speed flights, what could
happen?
Answer: The added pressure could cause pilots to become disorinated
Explanation:
Answer:
When sound molecules stack up in front of high-speed flights, loud noises are produced that can damage the ears.
Research to find out 5 uses of magnets in our daily life in medical contexts, route finding, security, sorting steel from other materials for recycling, etc.
Answer:
Medical: Magnets are used for the RMN, which uses waves and magnets to create images of the body, this process is really complex because is deeply related to quantum mechanics, so i will not dive in the topic.
Security: You can attach a magneto to a sensor, and when the magnet detects a metal, a current flows to the sensor and it can make a noise. This system is used to detect if someone has something of metal (like a knife for example) and a similar system is used to detect land mines or metals under the ground, which can be related to "route finding".
Sorting steel: When you have a mix of different metals, some of them will be attracted to the magnet and others not. An example where this is used is when you have a piece of steel with impurities, you can melt it and use a magnet to only grab the steel and leave most of the impurities.
Recycling. Big magnets are used to manage large pieces of steel that may be difficult or dangerous to handle by hand, for example. in order to move old cars and objects of similar size of steel, a big magnet is used.
Music: Modern instruments like electric guitars or electric basses, use magnets in the pickups: The magnet detects the movement of the strings, and this creates a current in a copper wire that is winded around the magnets, and that current then is transformed into sound by the amplifier.
What will happen to the chemical equilibrium if HCI is added to the system
Answer:
Shifts to the left
Explanation:
Usually when adding HCl to a system it reduces stress causing the equilibrium to go to the left
Two students are given different samples of a substance and are instructed to determine the properties of the substance.Which statement describes a property that will be the same for both students
Answer:
The boiling point of the substances
Explanation:
Because Boiling point is an intensive property.
25cm3 of 0.2mol/dm3 barium hydroxide solution reacted with 22.8cm3 hydrochloric acid. Calculate the concentration of the hydrochloric acid in mol/dm3. Ba(OH)2 + 2HCl BaCl2 + 2H2O
Explanation:
1 mol of Ba(OH)2 = 2 moles of HCl
1. The diameter of an atom is in the order of
A. 0.2m
B. 0.2mm
C. 0.2nm
D. 0.2pm
Answer:
0.2 nm
Explanation:
Sodium azide nan3 is dissolved in water. Acidified silver nitrate is added to the solution and a white precipitate forms. Aqueous ammonia is then added to the solution and a white precipitate forms. Aqueous ammonia is then added to the white precipitate. The azide ion n3- has similar chemical properties to the cl- ion. What is the formula of the ppt formed and what is the observation on adding aqueous ammonia?
Answer:
The formula of the precipitate formed is AgN₃ (Silver azide).
On adding aqueous ammonia to the precipitate formed, the precipitate dissolves due to the formation of a soluble complex compound with aqueous ammonia.
Explanation:
Sodium azide is NaN₃
Silver Nitrate is AgNO₃
The two of them react and theres a double displacement where the ions exchange radicals.
NaN₃(aq) + AgNO₃(aq) → NaNO₃(aq) + AgN₃(s)
The azide ion (N₃⁻), which has very similar chemical properties as the chloride ion (Cl⁻), also forms an insoluble compound with Silver.
And just like AgCl, the precipitate (AgN₃) also dissolves when ammonia is added by forming a soluble complex.
AgN₃(s) + 2NH₃(aq) → [Ag(NH₃)₂]N₃(aq)
Hope this Helps!!!
Write the difference between the reaction of Calcium and Aluminium with water.
Answer:
Both gives hydroxides, but
Calcium reacts with water to give calcium hydroxide Ca(OH)2. this product is slightly soluble in water.
Aluminium is less reactive than Ca, so it reacts with only steam, to give aluminium hydroxide Al(OH)3. This product is insoluble in water.
Which compounds give one singlet in the 1H NMR spectrum? CH3CH3 1461113dichloro22dibromo 1461123dimethyl2butene CH3―C≡C―CH3 CH2═CHCH═CH2 14611cyclohexadione 14611cyclopentane 14611123tribromopropane 14611ketone 14611ester
Answer:
CH3CH3, 1,3- dichloro-2,2- dibromo, 2-butyne, cyclopentane, 2,3- dimethylbut-2-ene, 2,2,4,4- tetramethlpenta-3-one.
Explanation:
This problem or question has to do with spectroscopy. Spectroscopy is one of the Important aspect of physical Chemistry. It is important because it helps in the identification of chemical samples or compounds. The Nuclear Magnetic field work generally on the principle of absorption of energy.
The following compounds as given in the question above shows singlet in the 1H NMR spectrum.
(1). CH3CH3: shows singlet in the 1H NMR spectrum at 0.86 ppm.
(2). 1,3- dichloro-2,2- dibromo; shows singlet.
(3). 2- butyne shows singlet
(4). Cyclopentane shows singlet.
(5). 2,3 - dimethylbut-2-ene shows singlet.
(6). 2,2,4,4- tetramethlpenta-3-one shows singlet.
Kindly note that I have used the IUPAC naming system to name the Compounds in the question above.
Earth's gravitational potential energy: GPE = mgh = Gravity (9.81m/s2) *
Mass (kg) x Height (m)
Kinetic energy: KE= Imov?
How do the mass and speed of an object affect the kinetic energy?
Answer:
as mass and the square of speed is directly proportional to the the kinetic enegry so, more there will be mass and speed there will be more kinetic enegry.
Explain why only the lone pairs on the central atom are taken into consideration when predicting molecular shape. What substances from the lab activity have more than one central atom?
Answer:
VSEPR molecular shapes are the substances from the laboratory operation that have more than one central atom.
Explanation:
Molecular shapes from VSEPR
Party breaches think that the largest aspect of a poisonous substance is the gravitational waves that makeup it. Its lone pair of electrons with that kind of a transition metal around this one, in either covalent bond, higher value, or lone pairs, has always been as close to a primary commitment as far as practicable to one another and. The shape of the molecule is defined by the most linear direction, i.e. layout in which minimal electrostatic repulsion is present. The degree of the repulsive force between pairs of electrons is as follows: bond pair-bond pair < bond pair-lone pair < lone pair-lone pair <. Because repulsive force among covalent bonds is strong, the molecules take a shape in which the lone pairs on the nitrogen carbon are at a given range from it to obtain the most reliable outcome.Explanation:
The reason is VSEPR theory, it considers electrons, involved in bond formation as the key part. The pairs of electrons around a central atom, they may be in sigma bonds, pi bonds, or lone pairs, are always in proximity with the positive nucleus and as far as possible from each other. Therefore, only the lone pairs on the central atom are taken into consideration when predicting molecular shape.
H2O2 , C2O4, CH3OH, CH3NH2
substances from the lab activity have more than one central atom
a compound X is formed by an element y which is in the form of pellet. The compound X is also the product of chlor - alkali process. Identify X and Y
Answer:
X is sodium hydroxide (caustic soda, NaOH)
y is sodium (Na)
Explanation:
The process of industrial electrolysis of sodium chloride solution by which chlorine and sodium hydroxide (caustic soda) can be produced is known as the chlor-alkali process as follows;
2NaCl + 2H₂O → Cl₂ + H₂ + 2NaOH
Given that the compound X is formed from a element y which is in the form of a pellet, we have;
The element in the above reaction that can exist as pellet is the silver white metallic sodium pellet
Therefore, the compound X is NaOH and the element y is sodium, Na.
differentiate between parallel circuit and series circuit
Answer:
series means current same
parallel means potential same