one of the differences between a voltaic cell and an electrolytic cell is that in an electrolytic cell: group of answer choices o2 gas is always produced at the cathode. a non-spontaneous reaction is forced to occur. only non-aqueous electrolyte solutions can be used. an electric current is produced by a chemical reaction. electron transfer does not occur. electrons flow towards the anode.

Partial bonding, for example, as part of a resonance hybrid, often results in structures with fractional bond orders.

What is resonance?

Resonance in chemistry, also known as mesomerism, is a means to describe bonding in specific molecules or polyatomic ions by fusing a number of contributing structures into a resonance hybrid according to valence bond theory.

Resonance structure identification guidelines:

Atoms are immobile. Electrons can only be moved in bonds or lone pairs (that are in p orbitals) The system's total fee must not change. A molecule's bonding structure needs to be preserved.

Therefore, Partial bonding, for example, as part of a resonance hybrid, often results in structures with fractional bond orders.

To learn more about resonance

Here: https://brainly.com/question/13741444

#SPJ4

According to Raoults law the total pressure of the mixture is  1.73a.

What is the contents of Raoult's law?

Describe Raoult's Law. According to Raoult's law, a solvent's partial evaporation rate in a solution (or mixture) is equal to or the same as the pure solvent's evaporation times the mole fraction present in the solution.

What is a case of Raoult's Law?

Let's say we have 100 mL each of water and ethylene glycol in two separate containers. We want to figure out the new vapor pressure of the mixture created when the two components are combined, given that the vapor pressure of pure water is 500 mmHg. Raoult's law is being directly applied in this case.

Briefing:

We can solve this problem using Raoults law. The formula for Raoults law is:

P_a = X_a * P

where,

P_a = the partial pressure of substance A

X_a = the mole fraction of substance A

P = total pressure

Therefore calculating for P:

P = P_a / X_a

P = 0.520/0.300

P = 1.73a

To know more about Raoult's Law visit:

https://brainly.com/question/28304759

#SPJ4

Magnetic moment (spin only) of octahedral complex having CFSE=−0.8Δo and surrounded by weak field ligands can be : Q

To answer this, the Crystal Field Stabilization Energy has to be calculated for a (d3 metal in both configurations. The geometry with the greater stabilization will be the preferred geometry. So for tetrahedral d3, the Crystal Field Stabilization Energy is: CFSE = -0.8 x 4/9 Δo = -0.355 Δo.

[Co(CN)64-] is also an octahedral d7 complex but it contains CN-, a strong field ligand. Its orbital occupancy is (t2g)6(eg)1 and it therefore has one unpaired electron. In this case the CFSE is −(6)(25)ΔO+(1)(35)ΔO+P=−95ΔO+P.

The crystal field stabilization energy (CFSE) (in kJ/mol) for complex, [Ti(H2O)6]3+. According to CFT, the first absorption maximum is obtained at 20,3000cm−1 for the transition.

To learn more about crystal field stabilization energy  visit:https://brainly.com/question/29389010

#SPJ4

On increasing the oxidizing power of the environment, the corrosion rate slows, the material is known as Noble material.

Corrosion is a natural process that converts a  metal into a more chemically stable oxide. It causes deterioration of materials by chemical or electrochemical reaction happening in their environment.

A noble metal is regarded as a metallic chemical element that is generally resistant to corrosion and is usually found in raw form.

The corrosion rate increases when the oxidation increases. But, noble materials have good rate of oxidation resistance. So, when oxidation increases, the environment causes slow corrosion.

Therefore, answer is noble material

To know more about corrosion click on https://brainly.com/question/90013

#SPJ4

Answer: you have to add the atomic number and the protrons

Explanation:

sulphur2-

K1+
B2+
I1-

Br1-

Explanation:

Note this work was not made by me but by a other brainly user

source

https://brainly.in/question/15317203

Answer: B: NaOH

Explanation:

348 kilojoules is the energy required to break single carbon-carbon bonds. hence for six carbon-carbon bond 348*6=2088 kilojoules.2088 kilojoules  is the bond enthalpy of six carbon-carbon bonds.

Bond dissociation energy refers to the amount of energy required to break one carbon -carbon bond. This Bond dissociation energy is known as Bond enthalpy.

518 kJ/mol is the Bond enthalpy of one carbon-carbon bond in benzene which means  518 kJ/mol energy is required to break one single c-c bond in benzene.

hence,  348 kilojoules is the energy required to break single carbon-carbon bonds. hence for six carbon-carbon bond 348*6=2088 kilojoules.2088 kilojoules  is the bond enthalpy of six carbon-carbon bonds.

To know more about bond enthalpy visit

https://brainly.com/question/9998007

#SPJ4

LiCl is positive.the mobilities of these ions in water at 25 ºc. NaCl is sodium chloride - common salt. It is a solid but when dissolved in water then it's an aqueous solution.

An aqueous solution is a solution in which the solvent is h2o. It is mostly shown in chemical equations by appending (aqueous) to the relevant chemical formula. For ex:, a solution of table salt, or sodium chloride (NaCl), in water would be represented as Na +(aq) + Cl −(aq).

Water molecules pull the sodium and chloride ions apart, separate the ionic bond that held them together. After pulling the salt compounds apart, the Na and Cl atoms are surrounded by water molecules, as this diagram shows. Once this happens, the salt is dissolved, result in a homogeneous solution.

Learn more about homogeneous solution here:

https://brainly.com/question/14454579

#SPJ4

The electron flow arrow always starts from the nucleophilic center to the electrophilic Centre.

What is nucleophilic ?

The term "nucleophile" refers to an atom or molecule that searches for a positive centre during a chemical reaction, such as the nucleus of an atom, since the nucleophile has an accessible electron pair for bonding.

What is electrophilic ?

An atom or molecule that searches for an atom or molecule that has a pair of free electrons during a chemical process. Lewis acids, which absorb electron pairs, are electrophilic chemicals; many of them are also Brnsted acids (compounds that donate protons).

The electron flow arrow always starts from the nucleophilic center to the electrophilic Centre. The arrow starts from the electrons.

Mechanism with arrows:-

Therefore, The electron flow arrow always starts from the nucleophilic center to the electrophilic Centre.

Learn more about nucleophilic from the given link.

https://brainly.com/question/14052597

#SPJ4

The magnesium sulfide having a weaker coulombic interaction would have a lower melting point. Option D

We know that a substance is said to be ionic if the substance is formed by the interaction of two ions. We know that one of the ions must be positive and the other must be negative. The magnitude of the charges would have an impact on the nature of the interaction between the charges.

Since we know that magnesium sulfide has a double negative charge on sulfur and a double positive charge on magnesium while the sodium has a single positive charge and the chloride has a single negative charge, the magnitude of the interaction between the sodium and the chloride ions is higher thus the magnesium chloride compound shown in image 1 would have a lower melting point.

Learn more about melting point:https://brainly.com/question/29578567

#SPJ1

The final concentration of the solution after adding water is HCl is 1.25M.

The solution of 25ml of 22M HCl is diluted to 440ml.

So, as we know,

Moles = molarity x volume

So, he moles of HCl are,

Moles = 22 x 25

Moles of HCl are 550 mole.

Even after diluting, the mole will not change, so,

Final concentration after adding water,

Concentration = 550/440

Concentration = 1.25M.

So, the final concentration of the HCl solution is 1.25M.

To know more about Concentration, visit,

https://brainly.com/question/17206790

#SPJ4

The  option (b) is correct, Water induces dipole moment or polarity in the non polar molecule and thus polarize it momentarily.

What is polar?

a structure where the density of electrons is unbalanced. Nonpolar structures are those that have an electron density that is roughly uniform. Molecules' many physical, chemical, and biological properties are affected by polarity, which can take many different forms

What is molecules?

the tiniest component of an object that possesses all of its physical and chemical characteristics. The number of atoms that make up a molecule might vary.

Water induces dipole moment or polarity in the non polar molecule and thus polarize it momentarily. Thus it is attracted towards polar water molecule.

Therefore, option (b) is correct, Water induces dipole moment or polarity in the non polar molecule and thus polarize it momentarily.

Learn more about polar from the given link.

https://brainly.com/question/1426521

#SPJ4

Arrhenius Model of acids and bases is applicable to nonaqueous substances.

Which of the following statements is FALSE?

A) Nonaqueous substances are subject to the Arrhenius Model of acids and bases.

B) The Bronsted-Lowry Model was created before the Arrhenius Model of acids and bases.

C) Bases without hydroxide ions can still use the Bronsted-Lowry Model.

D) Compared to the Arrhenius Model, the Bronsted-Lowry Model covers a greater spectrum of acid-base phenomena.

option A is correct

To know more about bronted lowery model

visit:

https://brainly.com/question/13920847

#SPJ4

The volume of argon will be 10.57 L.

Apply the ideal gas law, PV = nRT, where n is the number of moles and R is the gas constant.

We must divide the given mass of argon by its molar mass because we have mass and need moles. Argon has a molar mass of 40 g/mol.

So the number of moles of Argon in 15.2g is = [tex]\frac{15.2}{40} = 0.38[/tex]mol

Given:

P = 1.04 atm

n = 0.38 mol

R = [tex]0.082057 Latm K^{-1} mol^{-1}[/tex]

T = 353 K

Unknown:

V

Solution:

V = [tex]\frac{nRT}{P}[/tex]

V = [tex]\frac{0.38*0.082*353}{1.04} = 10.57[/tex] L

To learn more about ideal gas law, here

https://brainly.com/question/28257995

#SPJ4

Answer: Fluorine

Explanation:

Fluorine is least likely to lose an electron to form an ion as it needs only 1 electron to complete its shell compared to Oxygen which needs 2.

Answer:

flourine

Explanation:

Flourine will be the least likely to lose an electron because its ionization energy is higher than oxygen's. Ionization energy is an atoms ability to lose electrons, and it increases up the periods, and across the groups to the right.

0.0329 grams of aluminum can form by passing 353 c through an electrolytic cell containing a molten aluminum salt

AL^3+ + 3A^-   = AL

3 moles of e- = 1 mole AL

3 faraday e- =  1 mole AL

3 * 96485  c = 1 mole AL

1 c = (1 / 3*96485)*27 g

353c = 353*27 / 3*96485 g

        = 0.0329 g of AL

learn more about aluminum here:

https://brainly.com/question/9496279

#SPJ4

H₃PO₃ could be the unknown substance.

NaOH and NH₃are all basic; so, they must not be the unknown solute since the solution is acidic.

CH₃COCH₃ is a nonelectrolyte, which means it does not dissociate into ions when it dissolves in water. Acetone must not be the unknown since the solution is weakly conducted.

The two remaining candidates, HNO₃ and H₃PO₃ are both acids. The unknown solution does not conduct electricity as well as a solution of NaCl of the same concentration, which means that the unknown acid must not dissociate to the same extent as NaCl. Both NaCl and HNO₃ (a strong acid) dissociate 100%. Thus, the unknown solute must be H₃PO₃, which is known to be a weak acid (doesn't dissociate 100%).

What is the H3PO3 name?

Phosphorous acid (or phosphonic acid) is the compound described by the formula H3PO3. This acid is diprotic (readily ionizes two protons), not tricrotic as might be suggested by this formula.

What are the two colors of litmus paper?

Litmus paper is a strip of paper extracted from lichens, which is dipped into a solution to determine if it is an acid or base. Litmus papers are available in two colors, red and blue. Acidic solutions will change the color of the blue litmus to red strips.

Thus, the unknown substance is H3PO3.

To know more about Phosphorous acid : brainly.com/question/16047847

#SPJ4

If a wave has a frequency of 7.20 x 10^14 Hz and travels at the speed of light (speed of light = 3.0 x 10^8 m/s), the wavelength is 0.42 × 10⁻⁶ m.

The term wavelength of light is defined as the distance between the two successive crests or troughs of the light wave. Wavelength is denoted by the Greek letter lambda (λ).

Given:

frequency  = 7.20 x 10^14 Hz

speed of light = 3.0 x 10^8 m/s

Wavelength = ?

Wavelength = speed of light/ frequency

λ = ν / f

= 3.0 x 10^8 / 7.20 x 10^14

= 0.42 × 10⁻⁶ m

Thus, if a wave has a frequency of 7.20 x 10^14 Hz and travels at the speed of light (speed of light = 3.0 x 10^8 m/s), the wavelength is 0.42 × 10⁻⁶ m.

To learn more about the wavelength, follow the link;

https://brainly.com/question/13533093

#SPJ1

Gases C, E and F exhibit behavior significantly different from that expected for an ideal gas. gases exhibit behavior significantly different from that expected for ideal gas

A theoretical gas called an ideal gas is one that has lots of point particles moving around randomly and not being affected by other particles. The ideal gas concept is advantageous because it complies with the ideal gas law, a condensed equation of state, and is amenable to statistical mechanics analysis. A theoretical gas called an ideal gas is one that has lots of randomly moving particles but doesn't have any interparticle interactions. The opposite is true for a real gas; it takes up space and its molecules interact. As a result, PV is always equal to nRT.

Learn more about ideal gas here:

https://brainly.com/question/28257995

#SPJ4

Accumulation of acetyl-coA carboxylase indicates a lack of oxaloacetate, which in turn promotes pyuruvate carboxylase activity.

A number of metabolic processes in the metabolism of proteins, carbohydrates, and lipids involve the molecule acetyl-CoA. Its primary job is to transport the acetyl group to the citric acid cycle where it will be oxidized to produce energy. The group of chemical molecules known as o-glucuronides includes acetyl-CoA, commonly known as acetyl coenzyme A or accoa. These are glucuronides in which an O-glycosidic bond connects the aglycone to the carbohydrate molecule. Acetyl-CoA is regarded as a fatty ester lipid molecule as a result.

The oxidative decarboxylation of pyruvate from glycolysis, which takes place in the mitochondrial matrix, the oxidation of long-chain fatty acids, or the oxidative breakdown of certain amino acids are the three main sources of acetyl-CoA. The TCA cycle is the next step, where acetyl-CoA is oxidized to provide energy.

The metabolism includes protein, carbohydrate, and lipids involves the molecule acetyl-CoA (acetyl coenzyme A) in a number of metabolic activities. Its main function is to move an acetyl group to a Krebs cycle, where it is oxidized to release energy.

To know more about Acetyl-coa visit:

https://brainly.com/question/14174563

#SPJ4

Adding ammonium nitrate to an ammonia solution will result in a decrease in the pH of the solution.

Ammonia is a basic compound. In aqueous solution, the lone pair on the nitrogen atom is able to capture a proton, forming the ammonium ion. Ammonium is the conjugate acid of ammonia, and is slightly acidic. Adding ammonium to a solution of ammonia will lower the pH, since the ammonium is acidic.

The HCl and KCl in the system are there to increase the solution's ionic strength, which results in increased pH value.

The sodium formate solution adds sodium ions and formate ions. This disturbs the formic acid equilibrium, driving it towards reactants. This removes some hydronium ion from solution, increasing the pH.

Learn more about ph of solution ; https://brainly.com/question/11300720?referrer=searchResults

#SPJ4

Enthalpy change of Pentane (C5H12)  that burns is -3,270.5  kJ

Enthalpy change is defined as the difference in enthalpy of total products and reactants, each multiplied by the respective moles. It is expressed as ΔH°rxn

The formula for calculating the enthalpy change of a reaction is:

ΔH°rxn =∑[n x ΔH°f(product) - ∑[n x ΔH°f(reactant)]

The equilibrium reactions are:

C₅H₁₂(l) + 8O₂(g) ⇒ 5CO₂(g) +6H₂O(g)

ΔH°f(CO₂)(g) = -393.5 kJ/mol

ΔH°f(H₂O)(g) = - 241.8 kJ/mol

ΔH°f(C₅H₁₂)(l) = -146.8 kJ/mol

ΔH°f(O₂)(g) = 0 kJ/mol

The equation for the enthalpy change for the above reaction is:

ΔH°rxn =∑[n x ΔH°f(product) - ∑[n x ΔH°f(reactant)]

ΔH°rxn =∑[(n(CO₂) x ΔH°f(CO₂)) + (n(H₂O) x ΔH°f(H₂O)) ]- ∑[(n x ΔH°f(C₅H₁₂)) + (n x ΔH°f(O₂))]

ΔH°rxn =[( 5 x -393.5) + (6 x - 241.8 ) ]- [(1 x -147.8) + (8 x O₂)]

ΔH°rxn = -3,418.3 -(-147.8)

ΔH°rxn = -3,270.5  kJ

Therefore, the enthalpy of burning 1 mole of pentane is -3,270.5  kJ

learn more about enthalpy at https://brainly.com/question/14048672

#SPJ4

The coriolis effect coupled with the frictional coupling of wind and water leads to the moving of surface water at 90° towards the right ward direction of the wind in the Northern hemisphere and to the left ward direction of the wind in the southern hemisphere.

Ekman transport helps surface water move away from the costal area.

Equatorial Upwelling occurs when surface water move farther away from the equator and becomes replaced by the Upwelling water.

The cause of the upwelling is due to the deviation of the sea currents by the rotation of the earth. In this way, the arrows that Josefina drew represent the movement of the water.

The second cause is due to the effect that the wind has on the sea.

Therefore must draw an arrow representing the wind to correctly represent the outcrop of the surface water.

To know more about surface water, refer: https://brainly.com/question/15008048

#SPJ4

Answer: Potassium Hydrogen Sulfate

Explanation: The name of the compound K2SO4 is Potassium Hydrogen Sulfate.

The longest and shortest wavelength when a hydrogen atom in the ground state is excited by radiations of wavelength  975°A  are  1026°A  and  6569°A  respectively.

What is Bohr's atomic model?

To know more about the Bohr's atomic model, click the link given below:

https://brainly.com/question/11872378

#SPJ4

Given since chloroform has a standard energy of vaporization of 31. 4 kJ/mol and a standard entropy of 93. 7 j/mol/K, its normal boiling point is 335K.

Formaldehyde is a solvent, or a chemical that aids in the dissolution of other substances. It is also employed in the manufacture of pesticides and films, as well as in the building, paper, & board businesses. For lacquers, floor polish, resins, glue, alkaloids, fats, oils, and rubber, it serves as a solvent.

Excitation and nausea are the first symptoms, followed by vertigo and sleepiness. Chloroform overdose that is more severe might result in cardiac issues, fits, coma, and in some circumstances, death.

Briefing :

Given, Enthalpy of vaporization = 31.4 kJ/mol.

                      Standard entropy = 93. 7 j/mol·k

Using Gibbs free energy equation

Δ G = Δ H - T (ΔS)

at equilibrium (when the liquid is boiling), Δ G = 0

so,         0 = ΔH - T (Δ S)

     T (Δ S) = Δ H

           ΔS = ΔH / T

        93.8 = (31400 J/mol.) / T

            T  = 334.7

                =335K
Therefore , boiling point of chloroform is 335K .

To know more about Chloroform visit:

https:/brainly.com/question/13334667

#SPJ4

According to the web:

1. "In a collision, there is a force on both objects that causes an acceleration of both objects; the forces are equal in magnitude and opposite in direction. For collisions between equal-mass objects, each object experiences the same acceleration."

2. "If object A is in motion, collides with object B at rest, then the system will have some momentum due to motion of object A. Now after collision let us imagine the object becomes at rest, and object B comes to motion. This means the object B has some momentum making the system to have momentum."

WARNING: PLAGIARISM IS A REAL THING AND CAN AFFECT YOUR EDUCATION, THAT IS WHY I HAVE PLACED DOWN MY SOURCE SO THAT YOU DO NOT GET IN TROUBLE. DO NOT COPY THIS ANSWER WORD FOR WORD ON YOUR HOMEWORK. USE THIS AS A SOURCE, AND MAKE IT YOUR OWN:

I hope my answer helped you! If you need more information or help, comment down below and I will be sure to respond if I am online. Have a wonderful rest of your day!

The straight arrows in the structure c2h4 that represent binding bonding in ethene point to the -bond.

Bond are fixed-income products that reflect loans from investors to borrowers .  An bond can be compared to the an agreement outlining the terms of the loan and the associated payments between both the lender and borrower.

A strong sense of friendship, affection, or shared values which brings people together is referred to as a bond. We developed a very unique friendship as a result of the event. The tie that bound them was [+ between]. Synonyms include bind, link, tie, and union. Additional words for bond.

To know more about bond visit:

brainly.com/question/10777799

#SPJ4

The postulate of the kinetic molecular theory that breaks down under conditions of low temperatures there is - "no attraction or repulsive forces between the gas particle."

The kinetic molecular theory's "there is no attraction or repulsive forces between the gas particle" premise is one of the postulates that fails at low temperatures. At low temperatures, this hypothesis does not hold up well because gas particles move more slowly at low temperatures than they do at high temperatures.

Due of the particles' slow mobility, they might be drawn to nearby particles by their slow motion. At low temperatures, these particles will be more likely to interact with the adjacent particles. Therefore, at low temperatures, there is an interaction force between particles.

Hence, "no attraction or repulsive forces between the gas particle" is the postulate which fails under low temperature.

To learn more about Kinetic molecular theory refer- https://brainly.com/question/9783576

#SPJ4

Acetyl-CoA indicates conversion of fat to carbs necessary. Acetyl-CoA carboxylase accumulation indicates lack of citrate. NADH is produced for energy when pyruvate carboxylase is activated by acetyl-CoA.

Acetyl-CoA selectively activates pyruvate carboxylase. When acetyl-CoA concentrations are high, organisms use pyruvate carboxylase to divert pyruvate from the TCA cycle because acetyl-CoA is a crucial metabolite in the TCA cycle that generates a lot of energy.

The production of more oxaloacetate is triggered by an excess of mitochondrial acetyl-CoA. When lipolysis is induced, for instance, intramitochondrial acetyl-CoA levels rise, allosterically activating pyruvate carboxylase to produce more oxaloacetate for gluconeogenesis.

To know more about Acetyl-CoA visit :

https://brainly.com/question/16000193

#SPJ4