one of the common errors in this experiment is overshooting the equivalence point. does this error cause an increase or decrease in the calculated mass percent?

Answers

Answer 1

:Overshooting the equivalence point is one of the common errors in titration experiments. This error causes the calculated mass percentage to increase. It occurs when too much titrant is added to the solution being titrated, causing the endpoint to be passed.

Titration is a chemical method for determining the concentration of a solution of an unknown substance by reacting it with a solution of known concentration. The endpoint of a titration is the point at which the reaction between the two solutions is complete, indicating that all of the unknown substance has been reacted. Overshooting the endpoint can result in errors in the calculated mass percentage of the unknown substance

.Because overshooting the endpoint adds more titrant than needed, the calculated mass percentage will be higher than it would be if the endpoint had been properly identified. This is because the volume of titrant used in the calculation is greater than it should be, resulting in a higher calculated concentration and a higher calculated mass percentage. As a result, overshooting the endpoint is an error that must be avoided during titration experiments.

To know more about overshooting visit:

https://brainly.com/question/11382623

#SPJ11

Related Questions

Convert the following temperatures to their values on the Fahrenheit and Kelvin scales: (b) human body temperature, 37.0°C.

Answers

The human body temperature is 98.6 °F and 310.15 K when converted to Fahrenheit and Kelvin scales respectively

The human body temperature is 37.0°C. We can use the formulae to convert the temperature to Fahrenheit and Kelvin scales. The formulae are given below:Fahrenheit scale: F = (9/5)*C + 32

Kelvin scale: K = C + 273.15where C is the temperature in Celsius scale.On the Fahrenheit scale:F = (9/5)*37 + 32= 98.6 °FTherefore, the human body temperature is 98.6 °F.On the Kelvin scale:K = 37 + 273.15= 310.15 K.

Therefore, the human body temperature is 310.15 K. In summary, the human body temperature is 98.6 °F and 310.15 K when converted to Fahrenheit and Kelvin scales respectively.

Learn more about Fahrenheit

https://brainly.com/question/516840

#SPJ11

use the formula to calculate the relativistic length of a 100 m long spaceship travelling at 3000 m s-1.

Answers

The relativistic length of a 100 m long spaceship traveling at 3000 m/s is approximately 99.9995 m.

The relativistic length contraction formula is given by: L=L0√(1-v^2/c^2)Where L is the contracted length.L0 is the original length. v is the velocity of the object. c is the speed of light. The formula to calculate the relativistic length of a 100 m long spaceship traveling at 3000 m/s is: L=L0√(1-v^2/c^2)Given, L0 = 100 mV = 3000 m/sc = 3 × 10^8 m/sSubstituting the values in the formula:L = 100 × √(1-(3000)^2/(3 × 10^8)^2)L = 100 × √(1 - 0.00001)L = 100 × √0.99999L = 100 × 0.999995L ≈ 99.9995 m.

Learn more about length:

https://brainly.com/question/30582409

#SPJ11

3. a capacitor is connected across an oscillating emf. the peak current through the capacitor is 2.0 a. what is the peak current if: a. the capacitance c is doubled? b. the peak emf e0 is doubled? c. the frequency v is doubled?

Answers

Doubling the capacitance would halve the peak current, but the changes in peak emf and frequency would not directly impact the peak current without additional information about the circuit configuration.

To determine the effects on the peak current in a capacitor when certain parameters are changed, we can analyze each scenario separately:

a. If the capacitance (C) is doubled:

The peak current (I) through a capacitor in an oscillating circuit is given by the equation:

I = C * dV/dt

Where dV/dt represents the rate of change of voltage across the capacitor.

Doubling the capacitance while keeping the rate of change of voltage constant would result in a halving of the peak current. Therefore, the peak current would become 1.0 A.

b. If the peak emf (E0) is doubled:

The peak current (I) in an oscillating circuit is also influenced by the peak emf. The relationship between peak current and peak emf depends on the circuit parameters and is determined by Ohm's Law and the impedance of the circuit.

Without specific information about the circuit configuration, it is difficult to determine the exact relationship between the peak current and peak emf. Therefore, we cannot determine the new value of the peak current without additional information.

c. If the frequency (v) is doubled:

Doubling the frequency in an oscillating circuit would not directly affect the peak current through the capacitor. The peak current is primarily determined by the capacitance, voltage, and circuit impedance. Therefore, doubling the frequency would not change the peak current.

Learn more about capacitance here :-

https://brainly.com/question/31871398

#SPJ11

Question 8 (F): There is a spherical conductor (radius a) with a total (free) charge Q on it. It is centered on the origin, and surrounded by a linear, isotropic, homogeneous dielectric (Xe) that fills the space a

Answers

The question involves a spherical conductor with a charge Q and a radius a, surrounded by a linear, isotropic, homogeneous dielectric (Xe).

Explanation: In this scenario, the spherical conductor acts as a source of electric field due to the charge Q. The dielectric material, in this case xenon (Xe), influences the electric field by altering its strength. The dielectric is linear, isotropic, and homogeneous, meaning it behaves uniformly in all directions and has constant properties throughout its volume.

When a dielectric is introduced, it affects the electric field by reducing the overall strength of the field within the material. This effect is quantified by the relative permittivity or dielectric constant (ε_r) of the material, which characterizes how much the electric field is weakened compared to a vacuum. The dielectric constant of xenon (Xe) determines the extent to which it weakens the electric field. The presence of the dielectric also alters the capacitance of the conductor, which relates the charge on the conductor to the potential difference across it. Overall, the introduction of the linear, isotropic, homogeneous dielectric (Xe) influences the electric field and capacitance of the spherical conductor with charge Q, leading to a modified electrostatic behavior in the surrounding space.

Learn more about Conductor:

https://brainly.com/question/14405035

#SPJ11

Other Questions

How much is 1 ug.min/ml in 1 mg.h/L? Realize the systems below by canonic direct, series, and parallel forms. b) H(s) = s^3/(s+1)(s+4s+13) true or false osmosis in the kidney relies on the availability of and proper function of aquaporins. Solve each quadratic equation by completing the square. -0.25 x - 0.6x + 0.3 = 0 . A group of 800 students wants to eat lunch in the cafeteria. if each table at in the cafeteria seats 8 students, how many tables will the students need? howcould a committee ensure the success of a employee program that wasdeveloped & implemented that encompassed motivationandempowerment? Which element contains atoms with an average mass of 1.79 x 1022 grams? O Ag O Kr O Sc Fe O F Convert the point from cylindrical coordinates to spherical coordinates. (-4, pi/3, 4) (rho, theta, phi) Greta is the new HR Manager of a small company. The previous HR Manager kept every document he had access to in the past 10 years of his job at the firm, but Greta is determined to clear out the unnecessary documents. In the context of Equal Employment Opportunity Commission (EEOC) requirements, Greta should keep all applications and hiring-related documents and records for _____ before they can be discarded. consider a market in which the equilibrium price for a quart of orange juice is $3. in order to show support for its orange producers, the government imposes a minimum price $2.50. what would be the expected impact on the market for orange juice? Consider the function f(x,y)=x 42x 2y+y 2+9 and the point P(2,2). a. Find the unit vectors that give the direction of steepest ascent and steepest descent at P. b. Find a vector that points in a direction of no change in the function at P. a. What is the unit vector in the direction of steepest ascent at P ? (Type exact answers, using radicals as needed.) What is the wavelength of the light emitted by atomic Hydrogen according to Balmer's formula with m = 3 and n = 8? A) 389nm B)955nm C)384nm D)1950 QUESTION 39 What do CDKs that are activated just before the end of G2 do to initiate the next phase of the cell cycle? a. They act as proteases to degrade proteins that inhibit mitosis b. They phosphorylate lipids needed for the cell to enter mitosis c. They ubiquitinate substrates needed for the cell to enter mitosis d. They phosphorylate substrates needed for the cell to enter mitosis e. They de-phosphorylate substrates needed for the cell to enter mitosis QUESTION 40 What has happened to your telomeres since you began taking Cell Biology? a. they are the same length in all of my cells b. they have gotten shorter in my cells. c. my cells don't have telomeres; they are only present in embryonic stem cells. d. they have gotten longer in my senescing cells e. they have gotten longer in my necrotic cells 1/4 0f the students at international are in the blue house. the vote went as follows: fractions 1/5,for adam, 1/4 franklin, The table displays the frequency of scores for one Calculus class on the Advanced Placement Calculus exam. The mean of the exam scores is 3.5 . a. What is the value of f in the table? Which computer-based information system summarizes the detailed data of the transaction processing system in standard reports for middle-level managers 8. the function h is given by 2 h x( ) = log2 ( x 2). for what positive value of x does h x( ) = 3 ? (ii) a skateboarder, with an initial speed of 2.0 ms, rolls virtually friction free down a straight incline of length 18 m in 3.3 s. at what angle u is the incline oriented above the horizontal? A chain saw requires 2 hours of assembly and a wood chipper 6 hours. A maximum of 24 hours of assembly time is available. The profit is $150 on a chain saw and $240 on a chipper. How many of each should be assembled for maximum profit? To attain the maximum profit, assemble....... chain saws and ............wood chippers. b) Use a Riamann sum with five subliotervals of equal length ( A=5 ) to approximate the area (in square units) of R. Choose the represectotive points to be the right endpoints of the sibbintervals. square units. (c) Repeat part (b) with ten subinteivals of equal length (A=10). Kasate unicr f(x)=122x