of the following, which are characteristics of weak electrolytes? (select all that apply) select all that apply: they produce a low concentration of ions when dissolved in water. they are soluble in water. they exhibit no conductivity. they exhibit low conductivity.

Answers

Answer 1

Answer:A and C

Explanation:

Answer 2

They produce a low concentration of ions when dissolved in water, they are soluble in water and they exhibit low conductivity  are characteristics of weak electrolytes.

Electrolytes are substances that release ions when they are dissolved in water. Among them, salts, bases, and acids can all be categorised. These solutions transmit electricity because the positive and negative ions, referred to as cations and anions, respectively, are mobile. For instance, diluted sulfuric acid, which contains both negative sulphate ions and positive hydrogen ions (H+, a cation), serves as the electrolyte in a lead-acid automotive battery (SO42-, an anion).

Ionic compounds, such as ionic salts, that separate into cations and anions when dissolved, or covalent substances that chemically react with water to produce ions, are examples of electrolytes (such as acids and bases). Compounds referred to as nonelectrolytes do not produce ions when dissolved in water.

To know more about  electrolyte visit : brainly.com/question/28699046

#SPJ4


Related Questions

how does the number of atoms in a 27.5-gram zinc ring compare to the number in a nickel ring of the same mass?

Answers

The number of atoms in a 27.5-gram zinc ring compared to the number in a nickel ring of the same mass contains 1.08 times more atoms than 27.5g of zinc.

You need to convert the masses of zinc and nickel to no. of moles by using

Moles = mass/Relative Atomic Mass

Then you can calculate the number of atoms knowing that 1 mole of any substance contains the Avogadro Constant number of particles (atoms or molecules usually).

So , no. if moles of zinc = 27.5g/65.3

= 0.42 moles.

Since 1 mole contains 6.023 x 10²³ atoms, then 0.15 mole contains (6.023 * 10²³) x 0.42 atoms

= 2.5 10²³ atoms.

Similarly for nickel, no. of moles = 27.5/ 58.6

= 0.46 moles.

This contains (6.023 x 10²³) x 0.46 atoms.

= 2.7 x 10²³ atoms.

So 27.5g of nickel contains 2.7 x 10²³/ 2.5x 10²³ more atoms than 27.5g of zinc.

Thus, 27.5 g nickel contains 1.08 x more atoms than 27.5g of zinc.

To learn more about number of atoms refer- https://brainly.com/question/441927

#SPJ4

for each pair of compounds, pick the one with the higher boiling point. explain your reasoning. cs2 or cse2

Answers

As molecular weight and ionic character increase, boiling point rises as well. Due to its greater mass and ionic character compared to CS₂, CSe₂ has a higher boiling point.

Boiling point definition:

A substance's boiling point is the temperature at which it changes from a liquid to a gaseous or vapor state, where the two states are in equilibrium.

The molecular weight, bond type, temperature, and pressure of a substance all affect its boiling point. The 16th group of the oxygen family is where sulfur S and selenium Se both belong.

The covalent character decreases and the molecular weight rises as you move down a group. Se is the heaviest element in the sixteenth group and has a higher molecular weight than the other elements in the group.

Se has a higher boiling point due to its more ionic nature as well. Therefore, CSe₂'s boiling point is higher than CSe₂'s due to its higher mass and ionic character.

To know more about boiling point visit:

https://brainly.com/question/8771335

#SPJ1

which phases are present at the upper triple point? liquid diamond graphite gas which phase is stable at 100 atm100 atm and 6000 k

Answers

1. Graphite, liquid and diamond- The upper point where the lines connect is known as the upper triple point.

2. The "gas" phase of the diagram includes the intersection point, which is located at 100 atm and 6000 K. Therefore, at 100 atm and 6000K, the gas phase is stable.

3. The production of liquid carbon would include starting from the lower triple point by raising the temperature and pressure.

What is phase diagram?

A phase diagram depicts how a substance reacts to changes in temperature and pressure in a confined container. A potential system temperature and pressure combination is represented by each point in this graphic. The substance's solid, liquid, and gaseous states are represented by the three sections that make up the diagram.

To know more about the phase diagram, check out https://brainly.com/question/1612862

#SPJ4

the amount and the concentration of a salt solution is given. how much salt would you get if you evaporated all water from this solution?

Answers

If you evaporated all the water from this solution, you would receive 28 g and 3.4 g of salt; this is the quantity and concentration of a salt solution.

Are saline and salt water the same thing?

But the salt water found in the ocean is not the same as the bag of medicinal saline at the neighborhood hospital. Sodium chloride (table salt) and filtered water are used to make medical saline.

Can we consume salt water?

Seawater, in particular ocean water, contains a lot of salt and is not healthy to drink. Since we were designed to drink fresh water, drinking seawater can make us feel more dehydrated. In addition to making you thirstier, drinking salt water can seriously harm your body.

To know more about salt solution visit:

https://brainly.com/question/17594295

#SPJ4

When the adhesive forces between a liquid and the walls of a capillary tube are greater than the cohesive forces within the liquid.

Answers

The liquid will rise above the surrounding liquid due to the attractions when the adhesive forces are stronger than the cohesive forces between a liquid and the walls of a capillary tube.

What is capillary tube?

In a mechanism known as capillary action, liquid flows up into very thin tubes made of rigid materials such as plastic or glass termed capillary tubing or capillary tubes (capillarity). A tube used to regulate the flow of refrigerant that has an interior diameter and length that are calibrated. Additionally, it links the remote bulb to the thermostat and/or the thermostatic expansion valve.

What is capillary tube formula and its example?

Surface tension is another factor that causes a liquid column inside of a tiny capillary tube to rise. (h)=2Trg is the formula for capillary rise.

Capillary action is exemplified by the uptake of water in porous materials like plaster and paper, the wicking of paint between brush hairs, and the transport of water through sand.

To know more about Capillary Tube visit:

https://brainly.com/question/13740803

#SPJ4

A piece of gold, previously at room temperature, is placed in a water bath with a temperature of 100∘C. If we consider the gold to be the system and assume w constant, what is the outcome of this action?

a. heat flows out of the system and its internal energy decreases
b. heat flows out of the system and its internal energy increases
c. heat flows into the system and its internal energy decreases
d. heat flows into the system and its internal energy increases

Answers

Answer:

D. heat flows into the system and its internal energy increas

Explanation:

The question defines the system as the piece of gold.  The answer will depend on the gold's perspective of what is happening.  If we assume room temperature to be cooler than [tex]100^{o} C[/tex], then the gold will experience energy coming in until the tempeartures of both the water and gold are the same.  As heat flows into the gold, its internal energy will increase.  Option D seems to address both processes correctly.

from the gc data, assign the signals to 2-methyl-2-butene and 2-methyl-1-butene. how were the assignments made?

Answers

A GC-MS produces muti data, including chromatograms for quantitative and qualitative analysis, mass spectra for confirming identity, identifying unknown analytes, and determining the structural and chemical properties of molecules.

What do you discover with GC-MS data?

The GCMS uses a standard, or a proportion of the component that has already been established and has also been measured on the GCMS, to quantify the concentration of each chemical in a sample.

On a chart known as a chromatogram, a peak for each substance that the GC separates is used to symbolize it. The number of peaks reflects the sample's concentration of separated components. Each peak's location reveals the retention time of the compound.

To know more about compounds visit :

https://brainly.com/question/14117795

#SPJ4

If you travel from the United States to Spain, then you must have a passport. Can this be written as a biconditional? If so, what is the biconditional.

If you have a passport, then you travel from the United States to Spain.

You travel from the United States to Spain if and only if you have a passport.

You have a passport if and only if you travel from the United States to Spain.

This cannot be written as a biconditional.

Answers

Answer:

Explanation:

its b

f i start with 1.00 moles of nitrogen gas (n2) and an excess of hydrogen gas (h2) how many moles of ammonia can be produced? (what is the theoretical yield?)

Answers

One mole of Nitrogen gas will produce 2 moles of ammonia.

What is the purpose of ammonia?

Ammonia produced by industry is used as fertilizer in agriculture to the tune of 80%. In addition to these uses, ammonia is made into polymers, explosives, textiles, insecticides, dyes, and other chemicals. It is also used to purify water sources.

Can ammonia cause cancer?

Ammonia does not considered to be a cancer-causing substance. Ammonia has not been classified as carcinogenic by the EPA, the Department of Health and Human Services (DHHS), or the International Agency for Research on Cancer (IARC).

Briefing:

Hydrogen+Nitrogen→Ammonia

H2+N2-->NH3

Balancing the equation:

3H2+N2-->2NH3

So in an ideal 100% reaction

To know more about ammonia visit:

https://brainly.com/question/15409518

#SPJ4

what is the acidic level of a 100 liter tank thats 12% acid poured into a 50 liter tank that's 0% acid

Answers

The acidic level of liter tank is 8%.

Principle -

The reason this occurs is due to the large amount of energy released in the hydration reaction of sulfuric acid ions. Do not believe that heat comes from dissociation, as the dissociation of acids, bases, and salts always consumes energy. The energy is released from subsequent hydration. The energy released in this case will be absorbed by the small amount of water you are adding. As a result that water will splash out of the vessel carrying along with it particles of acid.In 50-LITRES of solution, there are 10 L of pure acid. After that, add "V" litres of water.10 is therefore equal to (50 V) x 8/100.

Calculations-

So 10= 4 8V/100.

8V/100 = 10-4= 6.

V is therefore 6 x 100/8, 600/8, or 75 liters.

The percentage of acid decreases to 8% after adding 75 litres of water to the acid solution.

percent of acid in 125 liters of acid solution, which would contain 10 liters of pure acid.= 10/125 x 100 = 8%.

To learn about acidic level -

https://brainly.com/question/14263669

#SPJ4

Which type of noncovalent interaction supports the double helix of dna and produces the base pairings a–t and g–c?.

Answers

The type of non-covalent interaction between the base pairing of a double helix of DNA molecule is hydrogen bonding.

The nucleic acids are categorized into two types that are as follows:

Deoxyribonucleic acid (DNA)

Ribonucleic acid (RNA)

The pairing of bases occurs in both RNA and DNA molecules. The bases that are present in DNA molecules are guanine, adenine, cytosine, and thymine while the bases that are present in RNA molecules are adenine, uracil, guanine, and cytosine.

In a DNA molecule, the pairing is done in a way that A is always paired with T, while G is paired with C and in RNA the base T is replaced by U. There exist hydrogen bonding between base pair and double helix of DNA molecule, they are weak bond and can be broken down easily.

To learn more about hydrogen bonding check the link below:

https://brainly.com/question/1420470

#SPJ4

why is it important to perform this reaction in a styrofoam cup? how might your results change if you used two styrofoam cups?

Answers

The only systems to conduct this reaction in a styrofoam cup are a drink in one with a lid and coffee in another with the lid closed.

We use Styrofoam cups because...

The best way to keep your drinks hot in the winter and chilled in the summer is in foam cups. Another useful industrial product is foam. In fact, foam products are used in most hospitals because they reduce contact with germs and other foodborne pathogens.

What exactly is a foam cup?

Styrofoam is a robust yet lightweight polystyrene (a form of plastic) foam. It's frequently used to create packing materials and coffee mugs for takeout. As a proprietary term, Styrofoam is typically capitalized. It is a form of lightweight,

To know more about styrofoam cup visit:

https://brainly.com/question/13945008

#SPJ4

does a reaction occur when aqueous solutions of potassium chloride and silver(i) acetate are combined?

Answers

Yes, a reaction will occur when aqueous solutions of potassium chloride and silver(I) acetate are combined. The reaction is as follows:

2KCl + AgC2H3O2 → K2C2H3O2 + AgCl

This reaction occurs because when aqueous potassium chloride and silver(I) acetate are combined, the positively-charged ions in the two compounds interact. The positively-charged potassium ions are attracted to the negatively-charged acetate ions, and the positively-charged silver ions are attracted to the negatively-charged chloride ions. This interaction causes the two compounds to form a neutral salt, potassium acetate, and silver chloride, both of which are insoluble in water.

What are aqueous solutions?

Are solutions in which the solvent is water. They are formed when a solute, such as a salt, sugar, or acid, is dissolved in water. Aqueous solutions are a common form of solution used in chemistry and are found in many everyday products, such as:

Soft drinksJuicesCleaning materials

Learn more about aqueous solutions:

https://brainly.com/question/19587902

#SPJ4

which of the following nuclides would be expected to be particularly stable?a.calcium-40b.potassium-38c.argon-39d.chlorine-37

Answers

Calcium-40 would be expected to be particularly stable.

A nuclide is a type of atom distinguished by the number of protons and neutrons in its nucleus, which approximates the nuclide's mass. The number associated with the nuclide's name is known as its mass number (the total number of protons and neutrons in the nucleus).

The terms isotope and nuclide are closely related. When we talk about isotopes, we're talking about a group of nuclides that have the same number of protons. The term nuclide refers to a nuclear species that may or may not be isotopes of a single element. A nuclide is an atom with a specific number of protons and neutrons in its nucleus, such as carbon-13, which has 6 protons and 7 neutrons.

To learn more about nuclides, here

https://brainly.com/question/9826865

#SPJ4

the g.c. that you will be using uses a flame ionization detector and requires two gases, hydrogen and helium. what are the specific roles of each of these gases?

Answers

The gas chromatograph (g.c.) that you will be using employs a flame ionization detector and needs two gases, helium, and hydrogen. The carrier gas, which differs depending on the type of GC being utilized, is crucial. The carrier gas must be inert chemically, dry, and oxygen-free.

Polar chemicals, such as butanol, will be absorbed on the column and move slowly if we employ the polar stationary phase. If they are polar, they will flow slowly, but non-polar chemicals, such as hexane, will move quickly. Given that they will move quickly, this is for the polar stationary base. The scenario will be entirely reversed when the polar non-polar stationary column is present, hence in the non-polar stationary situation. The order will be reversed, causing polar and non-polar molecules to migrate quickly. They'll start by absorbing a lot of energy.

An analytical tool used in science to evaluate analytes in a gas stream is called a flame ionization detector (FID). It is commonly employed in gas chromatography as a detector. This is a mass-sensitive instrument since it measures the number of ions per unit of time. With the right hydrogen generator, a hydrogen carrier may be produced from water on demand and offers a larger range of optimal linear velocities or flows than helium. It is also less expensive. With FID, it is simple to adjust for the additional hydrogen carrier gas by lowering the detector hydrogen flow in proportion.

To learn more about flame ionization detector, refer:-

https://brainly.com/question/15061968

#SPJ4

two coordination compounds that have the same ligands arranged differently in space around the central metal ion, but are not mirror images of one another, are called

Answers

Geometrical isomerism:- When two coordination compounds differ in the arrangement of their ligands in space around the central metal ion, they are said to be geometrical isomers.

What are geometrical isomers?

A geometric isomer is a type of stereoisomerism. It is also known as cis-trans isomerism. Geometric isomerism occurs due to the banned rotation about carbon-carbon double bonds or carbon-carbon single bonds in cyclic compounds.

Geometrical isomerism:- When two coordination compounds differ in the arrangement of their ligands in space around the central metal ion, they are said to be geometrical isomers.

To know more about geometrical isomers, visit:-

https://brainly.com/question/9064937

#SPJ4

how much heat is required to heat a 18.4 g ice cube from –23.0 °c to –1.0 °c? specific heat of ice is 2.108 j/g °c.

Answers

The final temperature at which both become equal is 81.95°C.

What is Specific Heat?

The amount of heat needed to raise a substance's temperature by one degree Celsius in one gramme, also known as specific heat. Typically, calories or joules per gramme per degree Celsius are used as the units of specific heat. For instance, water has a specific heat of 1 calorie (or 4.186 joules) per gramme per degree Celsius.

The French scientists Pierre-Louis Dulong and Alexis-Thérèse Petit showed in the early 19th century that measurements of a substance's specific heat allow one to calculate their atomic weights.

   45x0.88x(X-24)=-180×4.184×(X-85)

   39.6X-950.4=-753.12X+64015.2

   792.72X=6495.6

     X=6495.6/792.72

     X=81.95°C

Learn more about Specific Heat from given link

https://brainly.com/question/27991746

#SPJ4

How dose mass affect when objects collide??

Answers

When two objects with the same mass collide, Newton's laws tell us that they will accelerate the same amount but in opposite directions. Recall that force, velocity, and acceleration have both magnitude and direction. We use positive and negative signs to indicate the direction of each of these quantities.

Sodium bicarbonate reacts with hydrochloric acid in a gas-forming reaction to produce aqueous sodium chloride, water, and carbon dioxide gas: NaHCO3(s) + HCl(aq) → NaCl(aq) + H2O(l) + CO2(g) Determine the mass of CO2 gas produced when 8.28 g of NaHCO3 is added to a solution that contains 5.22 g of HCl.

Answers

4.44 g of carbon dioxide is produced Sodium bicarbonate reacts with hydrochloric acid in a gas-forming reaction.

The question provides us with a balanced chemical reaction and the masses of our reactants  [tex]NaHCO_{3}[/tex] (8.28 g) and HCl (5.22 g). As we do not know which is the limiting reactant, we will start by converting the masses of both reactants to moles:

n = [tex]\frac{m}{M}[/tex]

Where, n = moles; m = mass; M = molar mass

The molar masses of [tex]NaHCO_{3}[/tex] and HCl are obtained by adding the atomic masses of each atom. The atomic masses are obtained from the periodic table:

[tex]M_{ NaHCO_{3} }[/tex] = (22.99g/mol)+(1.01g/mo)+(12.01g/mol)+(3×16.00g/mol)          

              =84.01g/mol

[tex]M_{HCL}[/tex] = (1.01g/mol)+(45.45g/mol)

         =46.46g/mol

Now we can substitute the values in and solve:

[tex]n_{NaHCO_{3} }[/tex] = [tex]\frac{m}{M}[/tex] = [tex]\frac{8.28g}{ 84.01g/mol }[/tex]

               = 0.958 mol

[tex]n_{HCL}[/tex] = [tex]\frac{m}{M}[/tex] = [tex]\frac{5.22g}{46.46g/mol}[/tex]

          =0.112 mol

Next we will calculate the theoretical yield (in moles) of carbon dioxide from each reactant. In the process we will also determine the limiting reactant.

0.1 mol [tex]NaHCO_{3}[/tex] × [tex]\frac{1molCO2}{1molNaHCO3}[/tex] = 0.985 mol [tex]CO_{2}[/tex]

0.112 mol HCl× [tex]\frac{1molCO2}{1molHCL}[/tex] =0.112 mol [tex]CO_{2}[/tex]

From the results we can see the limiting reactant is

 [tex]NaHCO_{3}[/tex] as it produces less [tex]CO_{2}[/tex]. As the limiting reactant determines the theoretical yield, this means 0.1 mol of [tex]CO_{2}[/tex] will be produced. To determine the mass of [tex]CO_{2}[/tex]

we will rearrange the formula we used earlier with the molar mass of [tex]CO_{2}[/tex].

[tex]M_{CO_{2} }[/tex] = 12.01g/mol + (2×16.00g/mol) = 44.01g/mol

m = [tex]\frac{n}{M}[/tex] = (0.958 mol)(44.01g/mol)=4.44 g

Therefore 4.44 g of carbon dioxide is produced

To know more about Chemical reaction visit here ; https://brainly.com/question/22817140?referrer=searchResults

#SPJ4

what is the empirical formula for a substance that is 12.67 % aluminum, 19.73% nitrogen, 67.60% oxygen

Answers

The empirical formula for a substance that is 12.67 % aluminum, 19.73% nitrogen, 67.60% oxygen is Al(NO₃)₃.

given that :

aluminum = 12.67 %  = 12.67 g

nitrogen = 19.73 % = 19.73 g

oxygen = 67.60 % = 67.60 g

molar mass of aluminum = 12.67 / 26.98

                                         = 0.46 mol

molar mass of nitrogen = 19.73 / 14

                                       = 1.40 mol

molar mass of oxygen = 67.60 / 16

                                      = 4.2 mol

divided by the smallest one , we get:

aluminum = 0.46 / 0.46 = 1

nitrogen = 1.40 / 0.46 = 3

oxygen = 4.2 / 0.46 = 9

The empirical formula is = Al(NO₃)₃

To learn more about empirical formula here

https://brainly.com/question/14462365

#SPJ4

what is pheoby supposed to tell the others? do you agree with this? how is hurston using pheoby? why?

Answers

Phenoby is supposed to tell others that, "Telling and giving understanding are two different things".

According to Phenoby mink is so valuable, but coon is not valuable, even though both are fur.

Janie implies that within a short period of time telling would be taken by people simply as passing sentence and would most likely will be forgotten.

On the other hand people's behavior can be changed to the better way of thinking by making people understand about the real fact.

Hence, Phenoby is supposed to say this to others.

Learn more about Phenoby from the link given below.

https://brainly.com/question/28560314

#SPJ4

what are the risks involved in using auctions to source malic acid? briefly explain with evidence from the case.

Answers

The main risks associated with using auctions to source malic acid from Betapharm include quality risk, price risk, delivery risk, and contractual risk.

1. Quality Control: Betapharm's malic acid was of a lower quality than expected, leading to product recalls and customer complaints. This could lead to financial losses and/or damage to Betapharm's reputation.

2. Price Risk: As the auction process is unpredictable, Betapharm may end up paying more than expected or receive a lower quality of malic acid than expected. This could lead to financial losses and/or damage to Betapharm's reputation.

3. Delivery Risk: Betapharm may not receive the malic acid on time, leading to delays in production and financial losses.

4. Contractual Risk: Betapharm may not have a clear contract in place with the supplier, leading to disputes and potential financial losses.

To know more about malic acid, click below:

https://brainly.com/question/27187666

#SPJ4

Nuclear decay occurs according to first-order kinetics. How long will it take for a sample of radon-218 to decay from 99 grams to 0. 50 grams? the half-life of radon-218 is 35 milliseconds.

Answers

It will take, 2.6×10²/ (50 days) for a sample of radon-218 to decay from 99 grams to 0. 50 grams.

What is Nuclear decay?

When an atom's nucleus is unstable and produces radiation on its own, this process is known as nuclear decay. In turn, one or more new elements' nuclei are formed from the original element's nucleus. These progeny nuclei are less energetically unstable and have a smaller mass than their parent nuclei.

For instance, uranium-238 emits an alpha particle as it decays into thorium-234.

Therefore, It will take, 2.6×10²/ (50 days) for a sample of radon-218 to decay from 99 grams to 0. 50 grams.

To learn more about Nuclear decay

Here: https://brainly.com/question/5675819

#SPJ4

given that the solubility reaction for calcium phosphate is ca3(po4)2(s)⇌3ca2 (aq) 2po43−(aq) why does the addition of acid increase the solubility of calcium phosphate?

Answers

It lowers the concentration of phosphate ions, shifting the balance to the left.

What does the word "solubility" actually mean?

The maximum number of a chemical that will disintegrate in such a solvent at a given temperature is referred to as its solubility. Varying compounds have very high solubility, which is a characteristic of a particular solute-solvent pair.

What's an illustration of solubility?

The quantity of solute in one liters of a saturated solution, or solubility, is measured in grams. For instance, their solubility in water at 25 oC might be displayed as 12 g/L. The amount of solute per milliliter of saturated solution is measured by its molar solubility. As an illustration, positive and significant at 1 mol/L at 25 oC.

To know more about Solubility visit:

https://brainly.com/question/28170449

#SPJ4

a 40 l vat contains 30 l of solution that is 5% acid. the solution is being pumped out at 4 l/sec and pure acid is being pumped in at 3 l/sec. assume there is instantaneous, perfect mixing. what is the concentration of acid when the vat is one-fourth full?

Answers

The concentration of acid when the vat is one-fourth full is 3%.

What is an acid?

A Brnsted-Lowry acid or Lewis acid is a molecule or ion that can either donate a proton (the hydrogen ion, H+) or establish a covalent bond with an electron pair.Proton donors, also known as Brnsted-Lowry acids, are the first class of acids. Proton donors, also referred to as Arrhenius acids, generate the hydronium ion H3O+ under the unique situation of aqueous solutions. The Arrhenius theory was expanded upon by Brnsted and Lowry to take non-aqueous solvents into account.Aqueous Arrhenius acids have distinguishing characteristics that serve as a useful definition of an acid.Acids can turn blue litmus red, produce aqueous solutions with a sour taste, and react with bases and some metals (like calcium) to form salts.

The concentration of acid when the vat is one-fourth full can be expressed as a proportion of acid to the total volume of solution in the vat.

At the start, the vat contains 30 liters of a 5% acid solution. This means that 0.05 * 30 = 1.5 liters of acid is present.

As the solution is pumped out at 4 liters per second, and pure acid is pumped in at 3 liters per second, the total amount of acid in the vat is increasing at a rate of 3 liters per second.

At one-fourth full, the vat will contain 10 liters of solution (one-fourth of the original 40 liter volume).

To calculate the concentration of acid at this point, we need to calculate the total amount of acid present. Since the rate of increase of acid is 3 liters per second, after 10 seconds, the amount of acid present will be 3 * 10 = 30 liters.

Therefore, the concentration of acid when the vat is one-fourth full is 30/10 = 3%.

To know more about acid and bases, click the link given below:

https://brainly.com/question/14072179

#SPJ4

environmental agents such as nutrition and chemical exposure can alter gene expression by affecting the epigenome. epigenetic changes may also have important effects on behavior phenotypes. which of these examples correctly describe explicit evidence supporting epigenetic traits as heritable?

Answers

An example correctly describing explicit evidence supporting epigenetic traits as heritable is DNA methylation.

The epigenome can be impacted by environmental factors like a person's nutrition and exposure to contaminants. When cells divide, epigenetic alterations can be preserved from cell to cell and, in some situations, passed down through the generations. DNA methylation is a frequent epigenetic alteration type.

DNA methylation is an epigenetic modification, meaning it affects DNA without changing its sequence in any way. It modifies a gene's expression during cell differentiation and brings about a heritable alteration. Other potential environmental stressors that can alter epigenetic status include chemical and xenobiotic compounds in water or the atmosphere.

To know more about epigenome, refer to the following link:

https://brainly.com/question/16319638

#SPJ4

f it takes 54 ml of 0.1 m naoh to neutralize 125 ml of an hci solution, what is the concentration of the hci?

Answers

The amount of hcl is 0.0432 M. A neutralizing reaction happens after the acid and base are allowed to mix.

What happens during neutralization?

When an acid and a base come together, neutralization takes place, raising the pH to roughly 7. When lime is added to acidic soil to cure and relieve indigestion, for example, it is a practical practice that is used every day. Additionally, neutralization causes an alkali's pH to decrease to around seven.

Which specific neutralization can you cite?

Ans: A neutralizing reaction has numerous uses in daily life. For instance, antacid tablets, which have a fundamental ingredient, help balance gastric acidity. The neutralizing reaction helps to prevent tooth decay in a manner similar to that

Briefing:

volume of NaOH = 54 mL / 1000 = 0.054 L

Molarity NaOH = 0.1 M

Number of moles NaOH :

n = M * v

n = 0.1 * 0.054

n = 0.0054 moles of NaOH

Finally we calculate the number of moles of HCl in the solution from the stoichiometry of the reaction :

HCl + NaOH = NaCl + H₂O

1 mole HCl -------- 1 mole NaOH

?moles HCl ------- 0.0054 moles  NaOH

moles HCl = 0.0054 * 1 /1

= 0.0054 moles of HCl

Volume of HCl = 125 mL / 1000 = 0.125 L

M ( HCl ) = n / V

M = 0.0054 / 0.125

= 0.0432 M

To know more about neutralization visit:

https://brainly.com/question/15347368

#SPJ4

in this class, we will learn the bohn oppenheimer approximation which is the basis for treating molecules quantum mechanically. can you enumerate all the terms that generic exist in the full hamiltonian of a molecule?

Answers

The Born-Oppenheimer Approximation is the assumption that the electronic motion and the nuclear motion in molecules can be separated. It leads to a molecular wave function in terms of electron positions and nuclear positions.

This mainly involves the following assumptions:

The electronic wavefunction depends upon the nuclear positions but not upon their velocities, i.e., the nuclear motion is so much slower than electron motion that they can be considered to be fixed.

The nuclear motion sees a smeared-out potential from the speedy electrons.

If a Hamiltonian is separable into two or more terms, then the total eigenfunctions are products of the individual eigenfunctions of the separated Hamiltonian terms.

Associated with each measurable parameter in a physical system is a quantum mechanical operator and the operator associated with the system energy is called the Hamiltonian. The Hamiltonian contains the operations associated with the kinetic and potential energies.

Learn more about the Hamiltonian operator here:

https://brainly.com/question/13437682

#SPJ4

a 35.0 ml solution of ba(oh)₂ is neutralized with 33.0 ml of 0.350 m hno₃. what is the concentration of the original ba(oh)₂ solution?

Answers

Concentration of the original ba(oh)₂ solution is 0.33 M.

What is Concentration?
Concentration
in chemistry is defined as the quantity present in a mixture in excess of its total volume. It is possible to distinguish between the four different types of mathematical descriptions: mass concentration, molarity, number concentration, as well as volume concentration. The term "concentration" can be used to describe any type of chemical mixture, but it most often refers to the amount of solutes and solvents in a solution. Osmotic concentration and normal concentration are two variations of the molar (amount) concentration. The term "concentration" or an adjective like "dilute" for solutions with a low concentration as well as "concentrated" for solutions with a high concentration are frequently used in everyday, non-technical language to describe concentration in a qualitative manner.

Explanation:
Here, we have given two solution with their conc. and volume
So, formula used to calculate conc. is
M1V1 = M2V2  
let
M1 = molarity of ba(oh)2
V1 = volume of ba(oh)2 used
M2 = molarity of HNO 3
V2 = volume of HNO3 used
Now,
M1 X 35 = 0.35 x 33
M1 = 0.35 X 33 / 35
M1 = O.33

Hence, the concentration of ba(oh)2 is 0.33 M.

To learn more about Concentration
https://brainly.com/question/26255204
#SPJ4

the reaction of 5.45 g of carbon with excess o2 yields 8.10 g of co2. what is the percent yield of this reaction? %

Answers

The percent yield of this reaction is 53.05 %.

From the question, we have

Moles of carbon = 5.25/12.011 = 0.437

Mass of carbon dioxide formed = mole*molar mass

= 0.437 mol*44g/mol = 19.228 g.

Percent yield = 10.2/19.228*100%

=53.05%

The percent yield of this reaction is 53.05 %.

mass in physics, quantitative measure of inertia, a fundamental property of all matter. It is, in effect, the resistance that a body of matter offers to a change in its speed or position upon the application of a force.

To learn more about percentages, visit: brainly.com/question/25764815

#SPJ4

Other Questions
What percent of 60 is 51? consider a negatively charged protein adsorbed on anion-exchange gel at ph 8. (a) how will a gradient from ph 8 to some lower ph be use- ful for eluting the protein? imagine we found a strong positive correlation between depression and sleep problems. we might hypothesize that this relationship is explained by worry (i.e., depressed people tend to worry more than non-depressed people, leading them to experience more sleep problems). what type of analysis could we conduct to test this hypothesis? Which of the following has the same value as -5 - 15?A -15 - (-5)B-5 + 15C-5 + (-15)D-15 + 5 (LOTS OF POINTS)4. (Multiple Choice) In the figure shown, which of the following is the greatest?A. aB. bC. cD. dE: e if the auditor believes that financial statements prepared on the entitys income tax basis are not suitably titled, the auditor should suppose identical amounts of heat transfer into different masses of mercury and water, causing identical changes in temperature. what is the ratio of the mass of mercury to water? A soccer ball is kicked horizontally. what is the average speed if its displacement is 21 m after 4 sec A gas station is open 365 day a year, 24 hours a day. The store owner estimates that they served 40,000 cups of coffee last year. This quantity can also be expressed asfunctionsequation editorcups of coffee per hour (round to the nearest whole cup). This is a ? reasonable not reasonable estimate. Homeowners insurance costs are ______ in states that are more susceptible to hurricanes, floods or tornadoes. the role of the mouth in sound the prodution of sound during speech or singing is a complicated process lets concentrate on the mouth a typcal depth for the huamn mouth is about 8 cm although this number can vary. (Check it against your own mouth.) We can model the mouth as an organ pipe that is open at the back of the throat. What are the wavelengths and frequencies of the first four harmonics you can produce if your mouth is (a) open, (b) closed? Use .v=354 m/s Living organisms can be classified as prokaryotes or eukaryotes. Which two structures are common to both prokaryotic and eukaryotic cells?. carol calculates that the total cost of serving 200 customers per day would be $1,600. what is the marginal cost of this increase in customers? after setting up a campaign, a furniture company is ready to upload creatives for it. which three options for creatives will they be able to use in campaign manager 360? This energy is then used to move hydrogen ions from the matrix through the protein complexes into the intermembrane space. Draw blue arrows to show the movement of hydrogen ions across the membrane. Cross off the hydrogen ions in the matrix and draw them in the intermembrane space. how are leukocytes (neutrophils and macrophages) signaled where to leave the circulation and enter the infection site? g when providing care to a client with dementia, which interventions would be most appropriate? select all that apply. A rental car agency charges $160 per week plus $0.25 per mile torent a car. How many miles can you travel in one week for $335? Find the slope of the line going through the points (2,4) and (12) Dnde mirar seleccin de ftbol de argentina contra seleccin de ftbol de mxico.