Answer:
carbon dioxide, water, and sunlight.
Explanation:
A compound is analyzed and found to be 50% sulfur and 50% oxygen. If the total amount of the sulfur oxide is 12.5 g, how many grams of sulfur are there? Show work.
Answer:
25.0g is the mass of sulfur
Explanation:
The sulfur and the oxygen are 50:50. That means there is 1 mole of S per mole of O.
To solve this question we need to convert the mass of O to moles, as moles of O = Moles of S, we can find the moles of S and its mass:
Moles O = Moles S:
12.5g O * (1mol / 16g) = 0.781 moles
Mass S:
0.781 moles * (32g / mol) =
25.0g is the mass of sulfurDescribe the sizes of the first 4 planets?
Answer:
Explanation:the answer
Answer:
Bro.
Mercury – 1,516mi (2,440km) radius; about 1/3 the size of Earth.
Venus – 3,760mi (6,052km) radius; only slightly smaller than Earth.
Earth – 3,959mi (6,371km) radius.
Mars – 2,106mi (3,390km) radius; about half the size of Earth.
Jupiter – 43,441mi (69,911km) radius; 11x Earth's size
Explanation:
Plzzzz helppp this submits in 5 minutes plzzzzz helpppp meeeee
List five predictions of climate change and the effects on earth by the year 2100
Answer:
Predictions:
1. Half of the world will be cold and the other half will be hot, which will cause unbalanced state of climate on Earth.
2. The whole world will start to get hotter and there will be no winters or rain which causes water shortage, unable to grow crops. Polar ice is melting is an example.
3. Floods can come, because water level in sea is rising and it could kill all of us.
4. Earthquake can occur because in the Bible Jesus tells about earthquakes, etc at the second coming of Jesus.
Explanation:
What volume of a 3.00M KL stock solution would you use to make 0.300 L of a 1.25M Kl solution?
Answer:
0.125L or 125 mL
Explanation:
See the image for steps!0.125L of 3.00M KI stock solution is required to make 0.300 L of a 1.25M KI solution.
What is solution?A solution is a homogeneous mixture of one or more solutes dissolved in a solvent.
What is stock solution?A stock solution is a concentrated solution that will be diluted to a solution of lower concentration.
stock solution = diluted solution
What do you mean by dilution?Dilution is the process of decreasing the concentration of a stock solution by adding more solvent to the solution. The solvent added is the water. The more the solvent you add, the more dilute the solution is.The equation for dilution is M1V1=M2V2Where, M1 = concentration in molarity (moles/Litres) of the concentrated solution
V2 = volume of the concentrated solution,
M2 = concentration in molarity of the dilute solution
V2 = volume of the dilute solution.
The volume of 3.00M KI solution can be calculated using the dilution equation:
Given:
M1 = 3.00M, M2 = 1.25M, V1 = x, V2 = 0.300L
M1V1 = M2V2
3.00M(x) = 1.25M(0.300L)
x = 0.125L
Hence, 0.125L of 3.00M KI stock solution is required to make 0.300 L of a 1.25M KI solution.
To learn more about dilution here
https://brainly.com/question/15718488
#SPJ2
how does the chlorine atom attain a stable octet in each of the preceding cases
Answer:
where is the question i can't see it
An advantage of using renewable energies is? 1.They are harmful to the environment 2.We have a limited supply of them 3.They allow us to take energy from natural processes
Answer:
3. They allow us to take energy from natural processes
Explanation:
There are two major sources of energy namely: renewable and non-renewable. Renewable sources of energy are those natural sources that gets replenished faster than they are utilized, which is contrary to non-renewable sources. Examples of renewable sources of energy are wind energy, solar energy, hydro (water) energy.
According to the question, one advantage or merit that renewable sources have over their counterparts is that they allow us to take energy from natural processes e.g. wind, sunlight etc.
Hi, what's your worse break up story?
Describe the structure or shape of DNA
Answer:
a double helix structure
Explanation:
a two-stranded molecule that appears twisted, giving it a unique shape referred to most commonly as the double helix structure
Is it better for an element to be more abundant or less abundant?
I believe it's better for it to be more abundant because it's better to have more then less. Take water as an example. Water is an important factor to our survival and if we didn't have enough of that we would be in trouble. Or if we needed food but there wasn't enough more people would be dying from starvation. It's better to have a little more than a little less.
3. Which of the following represents a covalent compound?
a. 02
b. CO2
C. Cl2
d. Naci
For the Question "Which of the following represents a covalent compound?" we have
CO_2Option BFrom the Question we are told
'3. c
Generally
a covalent compound is a kind of bond in which valence electrons are shared b/w the party atoms forming the bond
Therefore
We see covalent compound in CO_2 as they match perfectly the phenomenon that is covalent bonding
Therefore
For the Question "Which of the following represents a covalent compound?" we have
CO_2Option BFor more information on this visit
https://brainly.com/question/14418346?referrer=searchResults
can some give 2 paragraph about science
Answer:
Explanation:Science is the scholarly and down to earth movement, including the efficient investigation of the structure and the laws of nature with intensive trial and pragmatic perception. Science is isolated into three branches: Natural sciences, Social sciences, formal sciences.
Science offers new information and revelations of many things we do not know. Day by day, science is progressing. Now science has helped man reach the moon, which was once unknown to man as a satellite. Every invention in technology or medical techniques is based on science and scientific research
How many formula units in 7.25 moles of Al2O3.
Answer:
If you're asking for the mass (grams)
then 739.21 g
Explanation:
No. of mols = mass/molar mass
Mass= Molar mass x No. of mols
Mass= 101.96 g/mol x 7.25 mols
Mass= 739.21 g
Calcule la formula empírica de la sustancia está compuesta por 18,4% de carbono 21,5% de nitrógeno y 60,1% de potasio
Answer:
La fórmula empírica es C₂N₂K₅
Explanation:
La fórmula empírica es la expresión más sencilla para representar un compuesto químico e indica los elementos que están presentes y la proporción mínima en números enteros que hay entre sus átomos. A esta fórmula se le conoce también como “fórmula mínima” .
En otras palabras, la fórmula empírica muestra la proporción entre los átomos de un compuesto químico.
Si supones que tenes 100 gramos del compuesto, los porcentajes en masa indicarán los gramos de cada elemento en esos 100 gramos. Si la sustancia está compuesta por 18,4% de carbono, 21,5% de nitrógeno y 60,1% de potasio, entonce habrá 18,4 g de carbono, 21,5 g de nitrógeno y 60,1 g de potasio
Para la obtención de la fórmula empírica entonces, teniendo en cuenta la masa molecular de cada sustancia, en primer lugar se calcula el número de moles relativos de cada elemento químico:
C: 18.4 g/12 g/mol = 1.5 moles
N: 21.5 g/14 g/mol = 1.5 moles
K: 60.1 g/16 g/mol = 3.75 moles
De esta manera hallas la relación entre el número de moles de los distintos elementos, pero no estará expresada en forma de números enteros y sencillos. Para expresar la relación anterior en forma de números enteros y sencillos, divides el número de moles de cada elemento entre el número de moles menor de todos ellos.
C = 1.5 moles/ 1.5 moles = 1
N = 1.5 moles/ 1.5 moles = 1
K = 3.75 moles/ 1.5 moles = 2.5
Si no se obtiene una relación de números enteros, debes multiplicar por un número sencillo para conseguirlo. En este caso, multiplicando por dos obtienes:
C= 2
N= 2
K= 5
La fórmula empírica es C₂N₂K₅
The empirical formula of the compound will be CNK
To get the empirical formula of the compound, we will follow the steps below;
Divide the mass of the elements by the molar mass to get the moles of each element;
For Carbon: 18.4/12 = 1.5 molesFor Nitrogen: 21.5/14 = 1.5 molesFor Potassium: 60.1/39 = 1.5 molesDivide through by the smallest ratio to get the ratio of each element present in the compound
For Carbon: 1.5 moles/1.5 = 1For Nitrogen: 1.5 moles/1.5 = 1For Potassium: 1.5moles/1.5 = 1The empirical formula of the compound will be CNK
Learn more on empirical formula here: https://brainly.com/question/23433537
A ninja motorbike travelling at 55 m/s takes 10 sec to come to rest . What is its deceleration rate ?
Answer:
Speed=Distance
Time
Explanation:
Why do rivers have deltas?
Answer:
A delta is formed when the river deposits its material faster than the sea can remove it. ... Cuspate - the land around the mouth of the river juts out arrow-like into the sea. The Ebro Delta. Bird's foot - the river splits on the way to the sea, each part of the river juts out into the sea, rather like a bird's foot.
I hope it's helpful!
What is the oxidation number of s in na2s4o6?
Answer:
+2.5
Explanation:
So the oxidation number of S in Na2S4O6is +2.5.
Answer:
Explanation:
Oxidation number of Na = 1+ There are two of them, so it is 2*1 = 2
Oxidation number of O = 2- There are 6 of them so 6 * 2- = -12
There are 4 S's so the oxidation number is 4*S
Now set up a small equation
2 + 4s - 12 = 0
And solve.
2 - 12 + 4s =0
-10 + 4s = 0
4s = 10
4s/4 =10/4
s = 2.5
If 0.150 moles of calcium oxide reacts with carbon dioxide gas, how many grams of calcium carbonate can be produced?
Answer:
15 g of CaCo₃
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
CaO + CO₂ —> CaCo₃
From the balanced equation above,
1 mole of CaO reacted to produce 1 mole of CaCo₃.
Next, we shall determine the number of mole of CaCo₃ produced by the reaction of 0.15 mole of CaO. This can be obtained as follow:
From the balanced equation above,
1 mole of CaO reacted to produce 1 mole of CaCo₃.
Therefore, 0.15 mole of CaO will also react to produce 0.15 mole of CaCo₃.
Finally, we shall determine the mass of 0.15 mole of CaCo₃. This can be obtained as follow:
Mole of CaCo₃ = 0.15 mole
Molar mass of CaCo₃ = 40 + 12 + (16×3)
= 40 + 12 + 48
= 100 g/mol
Mass of CaCo₃ =?
Mole = mass / Molar mass
0.15 = Mass of CaCo₃ / 100
Cross multiply
Mass of CaCo₃ = 0.15 × 100
Mass of CaCo₃ = 15 g
Thus, 15 g of CaCo₃ were obtained from the reaction.
The mass ratio of H:S:O in sulfuric acid today is 1:8:32. Predict the mass ratio of sulfuric acid in 23th century.
In the 23rd century, the mass ratio of H:S:O in sulfuric acid will remain 1:8:32.
Law of definite proportionsWe know from the law of definite proportions that irrespective of the path through which a chemical compound is obtained, it has a fixed composition by mass.
As such, the composition of a chemical substance does not vary. Therefore, in the 23rd century, the mass ratio of H:S:O in sulfuric acid will remain 1:8:32.
Learn more about law of definite proportions:https://brainly.com/question/13204929
After the phase change in the diagram below, the molecules will move...
?
Energy transferred in
Molecules moving
around each other
A faster, and the substance will be a solid
B faster, and the substance will be a gas
C slower, and the substance will be a liquid
D slower, and the substance will be a gas
Answer:
C is the correct answer
I hope this helps you:)
Explanation:
C slower, and the substance will be a liquid
Metal or Non-metal?
Potassium: metal
Fluorine:
Bromine:
Hydrogen
Beryllium:
Nitrogen
Answer:
Fluorine: non-metal
Bromine: non-metal
Hydrogen: non-metal
Beryllium: metal
Nitrogen:non-metal
Which best describes a single atom of an element?
A. It is the simplest form of matter.
o
B. It can be changed into a compound.
C. It is composed of more than one type of atom.
D. It can be broken down into simpler mixtures.
Answer:
I believe the answer is A: *It is the simplest form of matter" not 100% sure but I think that's correct
Explanation:
why copper ions move to the negative electrode in figure 1
Answer:
negative attraction
Explanation:
because a copper ion looses electrons, meaning it's negatively charged, and positives and negatives attract.
Burning match in physical or chemical change and why
Answer:
Answer is on the pic
Explanation:
I hope it's helpful!
Which has more mass, one mole of carbon (C) or one mole of copper (Cu)?
Explain.
what are the preparations of alcohols?
Answer:
Alcohols are prepared by SN2 reaction
Alkyl halides can be converted to alcohols by using SN2 reactions with OH- as a nucleophile. Substrates that undergo substitution by SN1 reaction can be converted to alcohols using water as the nucleophile (and it can even be the solvent).Explanation:
What is the chemical formula for nitrogen hetasulfide
Answer:
N203
Explanation:
Answer:
n203
Explanation:
EZ POINTS PLEASE HELP
What particle decomposes to produce the electron of beta radiation? A. electron
b. proton
C. neutron
D positron
Answer:
D
Explanation:
Beta radiation is the emission of the high-energy positron by the beat decay of the atom. The positron decomposes to produce an electron of beta radiation. Thus, option D is correct.
What is beta radiation?Beta radiation is the high-energy formation of the positrons and electrons by the radioactive decay of the high-speed and energy particles emitted by the decay of the nucleus.
The positron is a positive charged sub-atomic particle with mass as same as the electron. It is produced after the beta decay and follows the formation of electrons.
The beta radiations are produced from the radioactive decay that leads to light and particle formation in the form of electrons and positrons.
Therefore, option D. positrons are produced as a result of beta radiation.
Learn more about beta radiation here:
https://brainly.com/question/4072364
#SPJ2
Severe droughts cause some lands to become deserts, and this process leads to
water shortages
lands becoming
deserts
food shortages
all of the above
A balloon is left in the sun and heats up from 29.4°C to 33.7%. If the balloon
was originally at 0.68L, what is the new volume of the balloon?
Answer:
0.78L
Explanation:
According to Charles law, the equation below can be used to calculate the the new volume of the balloon
V1/T1 = V2/T2 .........eqn(1)
Where T1= initial temperature= 29.4°C
T,2= final temperature= 33.7°C
V2= final volume= ?
V1= initial volume= 0.68L
Making V2 the subject of formula from eqn(1)
V2=( T2 × V1)/T1
= (33.7 × 0.68)/29.4
=0.78L
Hence, the new volume of the balloon is 0.78L
Which type of plate boundary is associated with seafloor spreading at the source of the spread: convergent, divergent, or transform?
HURRY!