Answer: The greatest force of gravity on the ball will occur at the point when the ball is near to hit the ground ... hope this helps have a good day :P
Which statement correctly compares radio waves and microwaves?
A. Radio waves have shorter wavelengths and lower frequencies than microwaves.
B. Radio waves have longer wavelengths and higher frequencies than microwaves.
C. Radio waves have longer wavelengths and lower frequencies than microwaves.
D. Radio waves have shorter wavelengths and higher frequencies than microwaves.
Answer:
C. Radio waves have longer wavelengths and lower frequencies than microwaves.
Explanation:
Radio waves and microwaves are both electromagnetic waves. They do not require a medium for their propagation.
These waves are produced as result of the vibration between electric and magnetic fields perpendicular to one another.
On the electromagnetic spectrum, the waves are listed from left to rightAlong the spectrum, wavelength increases as frequency decreases. Energy also decreases to the right on the spectrum. Since microwaves comes before radio waves, they have shorter wavelength and higher frequency than micro waves.which two statement descibe processes most likely to be involved in the formation of sedimentary rock?
Answer:
Erosion
Explanation:
Sedimentary rocks are created from the build up of sediments, such sediments can be found in stuff like soil, other rocks and many more. Erosion is involved in these type of rocks because the byproduct of erosion are sediments.
Answer:
Rivers... and Windstorms....
Explanation:
I just did it a p e x
If a bicycle has an average acceleration of -0.44 m/s^2, and its initial forward velocity is 8.2 m/s, how long will it take the cyclist to bring the bicycle to a complete stop
Answer:
The value is [tex]t = 18.6 s[/tex]
Explanation:
From the question we are told that
The average acceleration of the bicycle is [tex]v = -0.44 \ m/s^2[/tex]
The initial forward velocity is [tex]u = 8.2 \ m/s[/tex]
Generally from kinematic equations we have that
[tex]v = u + at[/tex]
Here v is the final velocity of the bicycle and the value is v = 0 m/s
So
[tex]0 = 8.2 + (-0.44)t[/tex]
=> t = 18.6 s
part 1 of 2
A neutron in a reactor makes an elastic
head-on collision with the nucleus of an atom
initially at rest.
Assume: The mass of the atomic nucleus is
about 11.1 the mass of the neutron.
What fraction of the neutron's kinetic en-
ergy is transferred to the atomic nucleus?
part 2 of 2
In the initial kinetic energy of the neutron
is 1.77 x 10^-13 J. find its final kinetic energy.
Answer in units of J.
Answer:
for part 1 the answer is 0.303
Explanation:
Is this statement true or false?
Line spacing refers to the amount of space between each line in a paragraph.
true
false
Answer:
True
Explanation:
I just took the test and got 100
What happens to thermal energy when Kinetic energy is Increased/Decreased?
Answer:If kinetic energy increases, so does the thermal energy, and vice versa.
Please brainliest!
Help please.
How long is between each phase of the moon?
Answer:
The Moon actually takes 27.3 days to complete a single orbit around the earth. The Moon takes 29.5 days to complete one phase cycle.
Hope it helps!
A ford F-250 pulls a 1000-kg car with a net force of 2000 N. What is the acceleration of the car A=F/m
Answer:
2ms^2
Explanation:
A = 2000 divided by 1000
A= 2
Kiana is wearing a black shirt and shiny necklace. While she is outside at recess her shirt absorbs the light waves and gets very hot in the sun, but her necklace reflects the light waves and small circles of light are seen around the yard. What explains why the light waves behaved differently on her shirt than they did on her necklace?
Answer:
Black bodies are good absorber of light waves from the sun, while shining surfaces are good reflector of the light waves.
Explanation:
Generally, a black surface or material tends to absorb light waves while under the sun, while a shiny surface is a good reflector of the waves. This is because the black material is a good absorber, and also a good emitter.
The shiny necklace can only absorb little light waves from the sun, thus it reflects most of the light waves. The reflection is the reason for the small circles of light seen around the yard.
However, when in a cool environment the black shirt would cools faster (good emitter) than the shiny necklace.
Changes of state occur when there is a change in:
Thermal energy
Electromagnetic energy
Chemical energy
Electrical energy
The energy transferred between objects in contact as of temperature difference is called what?
Answer:
Heat
Explanation:
Answer:
Heat conduction, also called diffusion, is the direct microscopic exchange of kinetic energy of particles through the boundary between two systems.
Explanation:
What does someone with low self esteem look like
They feel they are, overall, bad people without any particular skills or value, when they are not.
I hope this helps you
God bless and have an awesome weekend
:)
Two carts connected by a 0.25 m spring hit a wall, compressing the spring to 0.1 m. The spring constant k is 100 N m . What is the elastic potential energy stored from the spring's compression?
Given that,
Initial position of the spring, x₁ = 0.25 m
Final position of the spring, x₂ = 0.1 m
The spring constant of the spring, k = 100 N/m
To find,
The elastic potential energy stored from the spring's compression.
Solution,
The work done in moving a spring from on position to another is stored in the form of elastic potential energy. It can be given as follows :
[tex]E=\dfrac{1}{2}k(x_2^2-x_1^2)\\\\=\dfrac{1}{2}\times 100\times (0.1^2-0.25^2)\\\\=2.62\ J[/tex]
So, the required energy is 2.62 J.
Answer:
1.125 J
Explanation:
The correct answer is 1.125 J
Conclusion When there is a constant unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will _____________________________. When there is an increasing unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will ________________________. When there is a constant unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________. When there is an increasing unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________.
Explanation:
When there is a constant unbalanced force applied in the same direction as the motion, speed will increase and acceleration will remain constant. When there is an increasing unbalanced force applied in the same direction as the motion, speed will increase and acceleration will increase.
According to newton's 2nd law
F = ma
F ∝ a
meaning when F increases , a increases and vice versa
28) What is the net force on this box? *
A- 10 N to the left
B- 10 N to the right
C- 60 N to the left
D- 50 N to the right
Answer:
C- 60 N to the left
Explanation:
there is a 60n arrow to the left of the box
Jennifer wears a black shirt on a sunny summer day. After spending one hour outdoors, Jennifer notices that the shirt is much warmer than it was originally. What role did sunlight play in warming the shirt
Explanation:
Black or Dark color clothes are good absorbers of heat. The heat from the sun is absorbed by the black shirt, thus making the shirt warmer. The sunlight here is source of heat. The amount of heat absorbed can be calculated according to the stephan's law.
hello help me pls! i need serious help
Answer:c
Explanation:
A car weighing 12,000 N is parked on a 36° slope. The car starts to roll down the hill. What is the acceleration of the car?
Given that,
Weight of a car, W = 12,000 N
It is parked on a 36° slope.
To find,
The acceleration of the car.
Solution,
Let m be the mass of the car. Using formula for weight of an object.
W = mg
[tex]m=\dfrac{12000}{9.8}\\\\=1224.48\ kg[/tex]
Let a be the acceleration of the car. Using second law of motion as follows :
[tex]a=\dfrac{F_{\text{parallel}}}{m}\\\\=\dfrac{F\sin\theta}{m}\\\\=\dfrac{12000\times \sin(36)}{1224.48}\\\\=5.76\ m/s^2[/tex]
So, the acceleration of the car is [tex]5.76\ m/s^2[/tex].
If an object is not moving, the forces acting upon it are...
A.Balanced
B. Weak
C.Unbalanced
D.Hulk SMASH!
The section of a longitudinal wave in which the particles are densely packed together
giving an area of high pressure is known as the
Answer:
compressions or refractions
Explanation:
Calculate the wavelength of an orange light wave with a frequency of 5.085 x 10^14 Hz. The speed of light is 3.0 x 10^8 m/s.
^ meaning a power
Answer:
5.9 x 10⁻⁷m
Explanation:
Given parameters:
Frequency = 5.085 x 10¹⁴Hz
Speed of light = 3.0 x 10⁸m/s
Unknown:
Wavelength of the orange light = ?
Solution:
The wavelength can be derived using the expression below;
wavelength = [tex]\frac{v}{f}[/tex]
v is the speed of light
f is the frequency
wavelength = [tex]\frac{3 x 10^{8} }{5.085 x 10^{14} }[/tex] = 5.9 x 10⁻⁷m
A hammer strikes a nail with a 8 N force for 0.018 seconds. Calculate the impulse of the hammer.
Answer:
0.144
Explanation:
Impulse is defined as force multiplied by time
please mark me brainliest
What part of an experiment contains the data tables and graphs
?
Answer: Review your data. ...
Calculate an average for the different trials of your experiment, if appropriate.
Make sure to clearly label all tables and graphs. ...
Place your independent variable on the x-axis of your graph and the dependent variable on the y-axis.
Hope this helps!!
Differentiate between
joule and watt
What is the impact of age on flexibility? A. Younger people tend to develop flexibility more slowly. B. Younger people tend to be more flexible. C. Older people tend to be more flexible. D. Older people cannot maintain their flexibility.
Answer:
the answer is b
Explanation:
A 75.0kg diver falls from a 3.00m board into the water. She goes 2.40m into the water before stopping. What is the average force the water exerted on the diver?
Answer:
The potential energy of the diver at the top is equal to the net work needed to be done to stop the diver.
PE = W
mg(h+d) = Fd
Explanation:
The insulating material placed between the conducting plates of a capacitor is a(n) ?
Answer:
the answer is dielectric
hope helps you
Explanation:
Answer:
dielectric
Explanation:
edge
The velocity of a 48.0 g shell leaving a 2.95 kg rifle is 391. m/s. What is the recoil velocity of the rifle?
Hi there!
[tex]\large\boxed{ -6.36m/s}[/tex]
Use the equation:
[tex]v_{2} = -\frac{m_{1}}{m_{2}} v_{1}[/tex]
Where m2 and v2 deal with the larger object, and m1 and v1 with the smaller object. Plug in the given values:
v2 = ?
m1 = 0.048 kg (converted)
m2 = 2.95
v1 = 391
[tex]v_{2} = -\frac{0.048}{2.95} *391[/tex]
[tex]v_{2} = -6.36m/s[/tex]
Will mark the brainliest
A nail of mass ,7.0g is held horizontally and is hit by a hammer of mass 0.25kg moving at 10ms −1. The hammer remains in contact with the nail during and after the blow.
If velocity of nail and hammer immediately after the blow is 9.7ms-1 Calculate the impulse transferred to the nail
Answer:
The impulse transferred to the nail is 0.01 kg*m/s.
Explanation:
The impulse (J) transferred to the nail can be found using the following equation:
[tex] J = \Delta p = p_{f} - p_{i} [/tex]
Where:
[tex]p_{f}[/tex]: is the final momentum
[tex]p_{i}[/tex]: is the initial momentum
The initial momentum is given by:
[tex] p_{i} = m_{1}v_{1_{i}} + m_{2}v_{2_{i}} [/tex]
Where 1 is for the hammer and 2 is for the nail.
Since the hammer is moving down (in the negative direction):
[tex]v_{1_{i}} = -10 m/s [/tex]
And because the nail is not moving:
[tex]v_{2_{i}}= 0[/tex]
[tex] p_{i} = m_{1}v_{1_{i}} = 0.25 kg*(-10 m/s) = -2.5 kg*m/s [/tex]
Now, the final momentum can be found taking into account that the hammer remains in contact with the nail during and after the blow:
[tex] p_{f} = m_{1}v_{1_{f}} + m_{2}v_{2_{f}} [/tex]
Since the hammer and the nail are moving in the negative direction:
[tex]v_{1_{f}}[/tex] = [tex]v_{2_{f}}[/tex] = -9.7 m/s
[tex] p_{f} = -9.7 m/s(7 \cdot 10^{-3} kg + 0.25 kg) = -2.49 kg*m/s [/tex]
Finally, the impulse is:
[tex] J = p_{f} - p_{i} = - 2.49 kg*m/s + 2.50 kg*m/s = 0.01 kg*m/s [/tex]
Therefore, the impulse transferred to the nail is 0.01 kg*m/s.
I hope it helps you!
What would be the acceleration of an object with a mass of 5,000 g when hit with a force of 55 N?
Answer:
11 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass in kg
From the question
5000 g = 5 kg
We have
[tex]a = \frac{55}{5} \\ [/tex]
We have the final answer as
11 m/s²Hope this helps you