many cars are fitted with airbags which inflate in an accident. Airbags contain solid sodium azide, NaN₃, which decomposes rapidly to form sodium and nitrogen. The nitrogen formed fills the air bags. Can someone please solve part b and c. I'll mark brainliest to whoever gets it right!
Answers
2NaN3 —> 2Na + 3N2
Since 1 mole of a gas occupies 24dm^3 at room temperature and pressure:
72dm^3 / 24dm^3 = 3 moles of Nitrogen which required 2 moles of Sodium Azide.
Since moles = mass/Relative molecular mass or molar mass
2 moles x 65~ g/mol = 130g
For the empirical formula:
Element H N
% Mass 2.33% 97.7%
Mass/Mr 2.33 6.97
2.33 7~
Divide by lowest number
1 3
Therefore empirical formula is
H1N3
Related Questions
Name one way chemicals can help the environment
Answers
Energy storage and transport. Chemical energy transport.
Answer:
to clean the water
Explanation:
Which missing item would complete this beta decay reaction?
Answers
Answer:
The answer is option A.Hope this helps you
Hi does anyone know how to do question 4?
Please show working out thanks.
Answers
answer:
a)1.274 g b) 0.013 mole
Explanation:
a) Mass of 1 mol of CuSo4. 5H20=
[tex]63 + 32 + (16 \times 4) + (7 \times 1) + (16 \times 5)[/tex]
=246g
no. moles of CuSo4. 5H2O=
[tex] \frac{mass}{mass \: of \: 1mole} [/tex]
so moles
=
[tex] \frac{3.14}{246} [/tex]
0.013 mole
in the equation
1 mole of sulphuric acid reacts to form 1 mole of CuSo4.5H2O
in other words
0.013 mole of sulphuric acid reacts to form 0.013 mole of CuSo4.5H2O
so mass of 1 mole (Mr) H2So4=
[tex](2 \times 1) + 32 + (16 \times 4)[/tex]
98g
mass of sulphuric acid= mole × mass of 1 mole
so mass= 0.013 × 98
1.274 g
b) In the equation
1 mole of sulphuric acid reacts to form 1 mole of copper(ll) oxide
in other words
0.013 mole of sulphuric acid reacts to form 0.013 mole of copper (ll) oxide
so 0.013 mole of copper(ll) oxide is reacted
Hope it helped and pls mark brainliest
Calcium (Ca) has an atomic number of 20. It can form an ion by losing 2
electrons. What would its charge be?
A. 18
B. 22
C. 2+
D. 2-
Answers
Answer:
2+
Explanation:
Apex lolz
Need help ASAP!!!! what is the value (angle) for the C=C=O bond in Ketene i.e. CH2=C=O
Answers
Answer:
[tex]180^\circ[/tex] by the VSEPR theory.
Explanation:
This question is asking for the bond angle of the [tex]\rm C=C=O[/tex] bond in [tex]\rm H_2C=C=O[/tex]. The VSEPR (valence shell electron pair repulsion) theory could help. Start by considering: how many electron domains are there on the carbon atom between these two bond?
Note that "electron domains" refer to covalent bonds and lone pairs collectively.
Each nonbonding pair (lone pair) of valence electrons counts as one electron domain.Each covalent bond (single bond, double bond, or triple bond) counts as exactly one electron domain.For example, in [tex]\rm H_2C=C=O[/tex], the carbon atom at the center of that [tex]\rm C=C=O[/tex] bond has two electron domains:
This carbon atom has two double bonds: one [tex]\rm C=C[/tex] bond and one [tex]\rm C=O[/tex] bond. Even though these are both double bonds, in VSEPR theory, each of them count only as one electron domain. Keep in mind that there are only four valence electrons in each carbon atom. It can be shown that all four valence electrons of this carbon atom are involved in bonding (two in each of the two double bonds.) Hence, there would be no nonbonding pair around this atom.In VSEPR theory, electron domains around an atom repel each other. As a result, they would spread out (in three dimensions) as far away from each other as possible. When there are only two electron domains around an atom, the two electron domains would form a straight line- with one domain on each side of the central atom. (To visualize, consider the three atoms in this [tex]\rm C=C=O[/tex] bond as three spheres on a stick. The central [tex]\rm C[/tex] atom would be between the other [tex]\rm C[/tex] atom and the [tex]\rm O[/tex] atom.)
This linear geometry corresponds to a bond angle of [tex]180^\circ[/tex].
first ionization energy
Answers
Answer:
The first ionization energy is defined as
Energy which is required to pull out one mole of the outermost shell's electrons in a neutral atom from one mole of gaseous atoms to produce 1 mole of gaseous ions each with a charge of 1+.[tex]A\to A^++ e^{-}[/tex] , where A is any neutral atom.In the periodic table, Its value decreases from top to bottom in groups and increases from left to right across a particular period. Helium has the largest first ionization energy.Francium has one of the lowest.How to get a catalyst back at the end of a chemical reaction?
Answers
Answer:
You should get the catalyst back already.
Explanation:
A catalyst shouldn't be used up during a chemical reaction. It is used to speed up a reaction, but it shouldn't disappear/be used up by a chemical reaction.
PLZ HELP SUPER STUCK T^T *will give brainiest* (30 points) (plz hurry!! its on a test)
Question: Aluminum is an element. Which best describes what makes up a sample of aluminum? one kind of atom two different kinds of atoms all carbon-based atoms a carbon atom and non-carbon atoms
Answers
Answer:
The answer to this is A. One kind of atom
Explanation:
The other options make no sense whatsoever. But enjoy.
I hope this helped.
Answer:
A. One kind of atom
Explanation:
How are the properties of metals and non-metals different?
Answers
Answer:
Explanation:
Properties of metals:
1. They have a lustre ( shine )
2. They have a silvery-grey or golden-yellow colour.
3. They conduct heat and electricity.
4. They are ductile ( can be drawn into wires ) .
5.They are malleable ( can be hammered into thin sheets ).
6. They are sonorous ( make a ringing sound when hit ).
Properties of non-metals:
1. They display a variety of colours.
2. They are poor conductors of heat and electricity.
3. They are not lustrous, ductile or malleable.
Hope it helps
plz mark as brainliest!!!!!!
Which of the following is NOT an indicator of a chemical
reaction?
O A. Breaking into small pieces
OB. Producing a solid
OC. Changing color
OD. Producing light
Answers
Answer:OD. Producing light
Explanation:
While camping you light a small campfire, initiating the combustion of wood to produce heat and
light. What can you determine about this reaction?
O A. It is exothermic.
B. The bond making energy is more than 600 kJ.
OC. It is endothermic.
D. The bond breaking energy is more than 600 kJ.
Answers
Answer:
A. It is exothermic
Explanation:
Combustion is a chemical reaction in which a substance combines with oxygen present in air to produce carbon (iv) oxide and water as well release heat and light energy.Combustion is an exothermic process.
An exothermic reaction releases energy in the form of heat to the surroundings. The energy required to break bonds in the reactants is less than the energy required to form new bonds in the products in an exothermic reaction.
From the given options;
A. It is exothermic is determinable since the reaction is a combustion reaction
B. The bond making energy is more than 600 kJ is not certain because the mass of the wood being burnt is not given. Also, wood is not composed of a specific element that would be taking part in the reaction, rather it is composed of various substances.
C. It is endothermic. is wrong because combustion of wood is exothermic.
D. The bond breaking energy is more than 600 kJ is not certain because the mass of the wood being burnt is not given. Also, wood is not composed of a specific element that would be taking part in the reaction, rather is composed of many substances.
Based on the law of Conservation of Mass, what happens to the mass of a substance in a chemical change? A: the mass is always conserved B: The mass is either created or destroyed C: the reactant always has more mass D: the product always has more mass
Answers
Answer:
A.
Explanation:
The amount of mass always stays the same, matter cannot be created nor destroyed, it can only change forms. Thus, the answer is A.
In a chemical reaction the total mass of all the substances taking part in the reaction remains the same. Also, the number of atoms in a reaction remains the same. Mass cannot be created or destroyed in a chemical reaction.
I hope this helps..
A drug problem can quickly consume A)a small portions of a person income B)the bulk of a person income C)a person excess income
Answers
Answer:
b
Explanation:
a drug problem consumes the bulk of a persons income because drugs are expensive to buy
A drug problem can quickly consume the bulk of a person income
What is a drug problem?A drug is any chemical substance that causes a change in an organism's physiology or psychology when consumed. Drug abuse or substance abuse refers to the use of certain chemicals for the purpose of creating pleasurable effects on the brain.
Drug use can have significant and damaging short-term and long-term effects. Taking some drugs can be particularly risky, especially if you take high doses or combine them with other drugs or alcohol.
People of any age, sex or economic status can become addicted to a drug. Certain factors can affect the likelihood and speed of developing an addiction.
The best way to prevent an addiction to a drug is not to take the drug at all. If your doctor prescribes a drug with the potential for addiction, use care when taking the drug and follow the instructions provided by your doctor. Thus you can save your income.
The correct answer is option B.
Learn more about drug problem, refer:
https://brainly.com/question/23284149
#SPJ2
write down the new substance formed when ammonia react with hydrochloric acid
Answers
Answer: ammonium chloride
Explanation: The reaction equation among ammonia (NH3) and hydrochloric acid (HCl) is written as follows: NH3+HCl=NH4Cl. Ammonia is a susceptible base that reacts with hydrochloric acid, forming a compound referred to as ammonium chloride.
What was the purpose of the periodic table?
A. To organize elements as they were discovered
O B. To list the chemical reactions an element can have
O C. To name elements as they were discovered
O D. To identify all the isotopes of each element
SUBMIT
Answers
Answer:
A
Explanation:
The purpose of the periodic table was to organize elements as they were discovered into periods and groups, according to their properties. It was not just a naming of elements, as a list.
The purpose of the periodic table was to organize elements as they were discovered. Thus option A is correct.
What is periodic table?Periodic table is defined as an arrangement of all known elements in order of increasing atomic number and recurrent chemical attributes.
It can also be defined as a tabular arrangement of chemical elements ordered by increasing atomic number and element groups.
It helps us to learn about an ordered grouping of the 118 known chemical elements.
The periodic table contains alkali metal, alkaline earth metal, transition elements, noble gas, post transition element etc. and many more elements are arranged in periodic table in groups.
Thus, the purpose of the periodic table was to organize elements as they were discovered. Thus option A is correct.
To learn more about periodic table, refer to the link below:
https://brainly.com/question/11155928
#SPJ5
Consider the equation below.
Zn + H2SO4 → ZnSO4 + H2
The mole ratio of zinc to zinc sulfate is
Answers
Answer:
1:1
Explanation:
There is one mole of zinc (Zn) and one mole of zinc sulfate (ZnSO₄).
The mole ratio is 1:1.
Hope this helps.
Answer:
1:1
Explanation:
Which will change will cause the gravitational force between a baseball and a soccerball
Answers
Pls mark as brainliest
4.Acrylic fibres are also known as
a)Terry cot
b)Orlon
c)Polyester
d)None of these
Answers
Answer:
B
Explanation:
DuPont created the first acrylic fibers in 1941 and trademarked them under the name Orlon.
Anyone know how to answer this?
Answers
Answer:
i metal
ii nonmetal
iii metal
iv nonmetal
Explanation:
If you look up what the element of a heater is, you get a picture of some sort of rod. It's the heating element of the heater, and must be some type of metal to conduct electricity and warm up. Fishing rods are made of either fiberglass, graphite, or carbon fibre. These are nonmetals. In order for a lightning rod to conduct electricity and bring the lightning down to the ground, it has to be metal. You wouldn't want a metal oven mitt, as that would burn your hand.
in Analytical chemistry laboratory. Nickle(ppm)in water sample estimated by two different students was as ,student 1 (25 24 24 24 24 28 26 ) and student 2 (24 25 24 24 25 25 ), if the true valude on Nickle in water was 20 ppm estimate the precision and accuracy of both students
Answers
Answer:
Answers are in the explanation
Explanation:
Precision and accuracy are both statistical concepts. Precision is about how close are the measured values to each other. Accuracy is closeness of the measured values to a specific value or reference value.
There are many ways to calculate precision and accuracy, one is stimating precision as Relative Uncertainty and accuracy as Relative Error.
Formulas are:
Relative Uncertainty: Standard desviation / Measured value.
Relative Error: Measured Value - Expected Value / Expected value
Measured value is the aveage of the values.
For student 1:
Mean = 25
Standard desviation = 1.5275
Relative Uncertainty: 1.5275 / 25
Relative Uncertainty: 0.061
Relative Error: 25 - 20 / 20
Relative Error: 0.25
For student 2:
Mean = 24.5
Standard desviation = 0.5477
Relative Uncertainty: 0.5477 / 24.5
Relative Uncertainty: 0.02
Relative Error: 24.5 - 20 / 20
Relative Error: 0.225
As the student 2 has a low Relative error and uncertainty, you can say student 2 is more accurate and precise
Select the most dilute solution a.A solution made by dissolving 60g of sodium hydroxide in 2000cm cubed b.A solution made by dissolving 40 g of sodium hydroxide in 1000 cm cubed of solution. c.A solution made by dissolving 10 g of sodium hydroxide in 250 cm cubed of solution. d.A solution made by dissolving 20 g of sodium hydroxide in 500 cm3 of solution.
Answers
Answer:
A, a solution made by dissolving 60g of sodium hydroxide in 2000cm³
Explanation:
Concentration = no. of moles / volume (in dm³)
1 dm³ = 1000cm³
no. of moles = mass / molar mass
molar mass of NaOH = 23.0+16.0+1.0 = 40 g/mol
Let's find the concentration of each of the solutions:
A:
= 60/40 /2
= 0.75 mol/dm³
B:
= 40/40 /1
= 1 mol/dm³
C:
= 10/40 / 0.25
=1 mol/dm³
D:
= 20/40 / 0.5
= 1 mol/dm³
Since 0.75mol/dm³ is the lowest concentration out of 4, it is the most dilute.
hurry I'm on a timer
Which term describes erosion?
O creates small particles
O hardens rock fragments
O transports solid materials
O dissolves rock components
Answers
Answer:
transports solid materials
Explanation:
Erosion is a process where solid materials are transported by natural forces such as wind or water.
Answer: c
Explanation:
Acid rain is the direct result of acid released by burning fossil fuels.
Please select the best answer from the choices provided
ОТ
OF
Answers
Answer:
The answer is TrueHope this helps you
How do you find the amount of electrons for any element?
Answers
Answer:
If you know the number of protons and neutrons you have to simply subtract the number of neutrons by number of protons the answer will be number of neutron
Explanation:
Answer:
We can find the amount of electrons through its Atomic number and with the help of electronic configuration
Determine the net iconic equation for the following chemical reaction: HCl(aq) + NH4OH(aq)———-> NH4Cl(aq) + H2O(I) Hint: HCl(aq) is strong acid NH4OH(aq) is a weak base
Answers
Answer : The net ionic equation will be,
[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]
Explanation :
In the net ionic equations, we are not include the spectator ions in the equations.
Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.
The given balanced ionic equation will be,
[tex]HCl(aq)+NH_4OH(aq)\rightarrow NH_4Cl(aq)+H_2O(l)[/tex]
The ionic equation in separated aqueous solution will be,
[tex]H^+(aq)+Cl^-(aq)+NH_4^+(aq)+OH^-(aq)\rightarrow H_2O(l)+NH_4^+(aq)+Cl^-(aq)[/tex]
In this equation, [tex]NH_4^+\text{ and }Cl^-[/tex] are the spectator ions.
By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.
The net ionic equation will be,
[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]
if 140cm3 of methane diffuse into air in 72 sec,how long will it take 210cm3 of sulphur dioxide to diffuse under the same condition ?
Answers
Answer:
time for sulphur dioxide to diffuse is 221.05 secs
The time for sulphur dioxide to diffuse is 108 sec.
Which gas diffuses twice quickly as SO2?Sulfur dioxide has a molecular weight of sixty-four and as a result, the square root is 8. since its inversely proportional, on the way to diffuse two times as fast, the rectangular root of the molecular weight should be 4, and subsequently the molecular weight might be 16. So the solution is methane (CH4).
Which gases diffuse the fastest?The charge of diffusion for a gas is inversely proportional to the rectangular root of its molecular mass (Graham's law). The gasoline with the lowest molecular weight will effuse the fastest. The lightest, and consequently fastest, fuel is helium.
Learn more about Sulfur dioxide here: https://brainly.com/question/15654465
#SPJ2
A. If both Assertion & Reason are true and the reason is the correct explanation of the assertion. B. If both Assertion & Reason are true but the reason is not the correct explanation of the assertion. C. If Assertion is true statement but Reason is false. D. If Assertion is false and Reason is true i Assertion: .Burning of magnesium ribbon produce whitish powder called magnesium oxide. Reason : Magnesium is generally cleaned by rubbing it on sand paper
Answers
Answer:
C. If Assertion is true statement but Reason is false.
Explanation:
The burning of magnesium in air produces magnesium oxide as shown by the equation;
2Mg(s) + O2(g) -----> 2MgO(s)
The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.
The reason has nothing at all to do with the assertion hence the answer given.
Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.
Answer:
Answer:
C. If Assertion is true statement but Reason is false.
Explanation:
The burning of magnesium in air produces magnesium oxide as shown by the equation;
2Mg(s) + O2(g) -----> 2MgO(s)
The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.
The reason has nothing at all to do with the assertion hence the answer given.
Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.
Explanation:
Which of the following describes what happens in a chemical reaction?
O A. Molecules change from one phase to another.
B. Molecules dissolved in solution are separated again.
O c. Chemical bonds are broken, and new ones are formed.
O D. Molecules mix without rearranging atoms.
Answers
Answer:
c. Chemical bonds are broken, and new ones are formed.
Explanation:
Hope this helps. :)
In a chemical reaction, chemical bonds are broken, and new ones are formed.
What is a chemical reaction?Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.
There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical reactions:
1) inorganic reactions
2)organic reactions
3) biochemical reactions
During chemical reactions atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical reactions,here:
https://brainly.com/question/29762834
#SPJ2
I need a help from this question!!
Answers
Answer:
B
Explanation:
Please take a look at the picture attached for the drawings and structures.
C2H4 is a alkene (C-C double bond). When steam (water) is added, it turns into an alcohol, where the double bond breaks and a (-OH) functional group is attached to one of the Carbons. In this case, C2H4 ethene is turned into ethanol.
When an alcohol undergoes oxidation, primary alcohols turn into aldehyde (-CHO) or carboxylic acids (-COOH). Secondary alcohol turns into ketone. Ethanol is a primary alcohol. And since it later reacts with propanol, it can only form carboxylic acid when it oxidizes. The product in this reaction is ethanoic acid.
Carboxylic acid reacts with alcohol to form an ester (-COO-). the -COOH group from acid combines with the -OH group from alcohol to form an ester bond -COO- while eliminating H2O. Therefore, when propanol undergoes esterification with ethanoic acid, propyl ethanoate is produced. It is the answer of B.
(PLEASE HELP, LAST QUESTION I NEED! ) Describe to me the purpose of stoichiometry calculations.
Answers
Explanation:
Stoichiometry measures these quantitative relationships, and is used to determine the amount of products and reactants that are produced or needed in a given reaction. Describing the quantitative relationships among substances as they participate in chemical reactions is known as reaction stoichiometry.