Look up and record the boiling point of acetic acid, and explain why only some of it evaporates from the reaction mixture.

Answer:

(+)-cholesterol = 71.88%

(-)-cholesterol = 28.12%

Explanation:

Asuming 1 gram of sample is dissolved in 1mL of water and the sample cell was 1dm long.

Enantiomeric excess is defined as the amount of pure enantiomer in a sample. The formula is:

ee = [α]mixture / [α]pure enantiomer.

Replacing:

ee = 14° / 32°×100 = 43.75%

As the sample is 14°, There is an excess of (+)-cholesterol and 56.25% is a 1:1 mixture of enantiomers.

That means percent composition of enantiomers is:

Answer:

0.374 L

Explanation:

Step 1: Given data

Mass of silver nitrate (solute): 15.89 g

Molarity of the solution: 0.250 M

Step 2: Calculate the moles of silver nitrate

The molar mass of silver nitrate is 169.87 g/mol.

[tex]15.89g \times \frac{1mol}{169.87g} = 0.09354mol[/tex]

Step 3: Calculate the volume of the solution

The molarity is equal to the moles of solute divided by the liters of solution.

[tex]M = \frac{moles\ of\ solute }{volume\ of\ solution} \\volume\ of\ solution = \frac{moles\ of\ solute}{M} = \frac{0.09354mol}{0250mol/L} = 0.374 L[/tex]

Due to the significant figures rules, we keep 3 significant figures.

Answer:

0.37416 L

Explanation:

M = mol/L

molar mass ( for AgNO₃ ) = 169.87 g

moles = given mass/molar mass

15.89 g/169.87 = .09354

.250 = .09354/L

= 0.37416

Answer:

4 and 6 would work for this

Answer:

pressure is = 54.9802atm

Explanation:

using ideal gas equation

PV=nRT

The answer is Hydrogyn bonding. It keeps the water molocules bonded together and in a liquid state, without it it'd be in a gashious state.

Answer:Hydrogen bonds keep them together in room temperature, hope this helps!

Explanation:

<!> Brainliest is appreciated! <!>

Answer:

0.133 mol (corrected to 3 sig.fig)

Explanation:

Take the atomic mass of H=1.0, and O=16.0,

no. of moles = mass / molar mass

so no. of moles of H2O produced = 1.2 / (1.0x2+16.0)

= 0.0666666 mol

From the equation, the mole ratio of H2:H2O = 2:2 = 1:1,

meaning every 1 mole of H2 reacted gives out 1 mole of water.

So, the no, of moles of H2 required should equal to the no, of moles of H2O produced, which is also  0.0666666 moles.

mass = no. of moles x molar mass

hence,

mass of H2 required = 0.066666666 x (1.0x2)

= 0.133 mol (corrected to 3 sig.fig)

Answer: The molarity of solution is 0.221 M

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n}{V_s}[/tex]

where,

n = moles of solute

[tex]V_s[/tex] = volume of solution in L

moles of [tex]NaI[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{49.8g}{149.89g/mol}=0.332mol[/tex]

Now put all the given values in the formula of molality, we get

[tex]Molarity=\frac{0.332mol}{1.50L}[/tex]

[tex]Molarity=0.221mol/L[/tex]

Therefore, the molarity of solution is 0.221 M

Answer:

Ductility is the how stretchable a solid is under tension. If a solid is ductile, then it can be stretched into wire-like (think rubber band). Ductility is similar to malleability and physical components of solids.

Explanation:

Answer:

[tex]1) NH_{4}IO_{3}\\2) Pb(IO_{3})_{4} \\3) NH_{4}(C_{2}H_{3}O_{2})\\4) Pb(C_{2}H_{3}O_{2})_{4}[/tex]

Explanation:

[tex]1) NH_{4}^{+}IO_{3}^{-} ---> NH_{4}IO_{3}\\2) Pb^{4+}(IO_{3}^{-})_{4} --->Pb(IO_{3})_{4} \\3) NH_{4}^{+}(C_{2}H_{3}O_{2})^{-} ---> NH_{4}(C_{2}H_{3}O_{2})\\4) Pb^{4+}(C_{2}H_{3}O_{2})^{-} _{4} --->Pb(C_{2}H_{3}O_{2})_{4}[/tex]

Answer:

5727 years or 5730 (rounded to match 3 sig figs) whichever one your teacher prefers

Explanation:

First Order decay has a half life formula of Half Life = Ln (2) / k = 0.693/K

Half-life = 0.693/k = 0.693/1.21 x10-4 =  5727 years or 5730 (rounded to match 3 sig figs)

This should be correct because if you google the half-life of 14 C it is ~ 5700 years

Answer:

[tex]6.5X10^-^5~\frac{mol}{L}[/tex]

Explanation:

For this question, we have to start with the ionization equation for [tex]Ag_2CrO_4_(_s_)[/tex], so:

[tex]Ag_2CrO_4_(_s_)~<->~2Ag^+~_(_a_q_)~+~CrO_4^-^2_(_a_q_)[/tex]

With this in mind we can write the Ksp expression:

[tex]Kps~=~[Ag^+]^2[CrO_4^-^2][/tex]

Additionally, for every mole of [tex]CrO_4^-^2[/tex]  formed, 2 moles of [tex]Ag^+[/tex] are formed. We can use "X" for the unknown concentration of each ion, so:

[tex][CrO_4^-^2]~=~X[/tex]  and  [tex][Ag^+]~=~2X[/tex]

Now, we can plug the values into the Ksp expression:

[tex]1.12x10^-^1^2~=~(2X)^2(X)[/tex]

Now we can solve for "X" :

[tex]1.12x10^-^1^2~=~4X^3[/tex]

[tex]X^3=\frac{1.12X10^-^1^2~}{4}[/tex]

[tex]X=(\frac{1.12X10^-^1^2~}{4})^(^1^/^3^)[/tex]

[tex]X=6.5X10^-^5~\frac{mol}{L}[/tex]

I hope it helps!

Answer:

[tex]H_{comb}=-4406kJ/mol[/tex]

Explanation:

Hello,

In this case, the enthalpy of combustion is understood as the energy released when one mole of fuel, in this case octene, is burned in the presence of oxygen and is computed with the enthalpies of formation of the fuel, carbon dioxide and water as shown below (oxygen is circumvented as it is a pure element):

[tex]H_{comb}=8*\Delta _fH_{CO_2}+5\Delta _fH_{H_2O}-\Delta _fH_{C_8H_{10}}[/tex]

Thus, since we already know the enthalpy of combustion of the fuel, for carbon and water we have -393.5 and -241.8 kJ/mol respectively, thereby, the enthalpy of combustion turns out:

[tex]H_{comb}=8*(-393.5kJ/mol)+5(-241.8kJ/mol)-49.0kJ/mol\\\\H_{comb}=-4406kJ/mol[/tex]

Best regards.

Answer:

Francium

Explanation:

The atomic radius increases from top to bottom in a group, and decreases from left to right across a period.

so francium (Fr) is the largest atom or has highest radii.

Hope this helps & please mark as brainiest!

Answer:

Francium has the largest atomic radius.

The general trend for atomic radii is increasing from top to bottom and decreasing from left to right so the one with the largest atomic radius will be in the bottom left of the periodic table.

Answer:

Choice B, C, and D.

Explanation:

Choice A is not true in general. Here's a way to think about that. Consider a very special equilibrium where the concentration of reactants and products are indeed equal. When one of the external factors (such as temperature) changes, the equilibrium will shift towards either side of the reaction. More products will be converted to reactants, or vice versa. Either way, in the new equilibrium, the concentration of the reactants and products will not be equal any more.

Choice B should be considered with choice C and D in mind.

Choice C is indeed correct. The reaction rate would not be zero unless all the reactants were used up or taken out of the system. That's not what happens in an equilibrium. Instead, when reaction rate is plotted against time, the graph for reactions in both directions will eventually flat out at a non-zero value.

Choice D explains why even though choice C is correct, the concentration of a system at equilibrium stays the same. At the equilibrium, reactions in both directions are still happening. However, during the time it takes for the forward reaction use up some reactant particles, the reverse reaction would have produced these particles again. On a large scale, there would be no observable change to the concentration of each species in the equilibrium. Therefore, choice B is also correct.

Answer:

See explanation

Explanation:

-) Given the molecules propane (C3H8) and n-butane (C4H10) n-butane has the higher boiling point mainly due to a larger chain of carbons.

In this question, in propane, we have a chain of three carbons. In butane, we have fourth carbons. If we have more carbons we will have more interactions. If we have more interactions we have to give more energy to go from liquid to gas, therefore we will have a higher boiling point.

-) Given the molecules diethyl ether (CH3 CH2OCH2 CH3) and 1-butanol (CH3 CH2CH2 CH2OH) 1-butanol has a higher boiling point mainly due to hydrogen bonding.

In the case of butanol, we have the "OH" group. If we have a hydrogen bond to a heteroatom (O, S, P, or N) we will have the presence of this type of interaction between molecules. If we have more interactions we have to give more energy to go from liquid to gas, therefore we will have a higher boiling point.

I hope it helps!

Answer: 1) Endothermic

2) Yes, absorbed.

3) 166.86 kJ will be absorbed.

Explanation:

1) To determine if a reaction is endothermic (heat is absorbed by the system) or exothermic (heat is released by the system), first calculate its change in Enthalpy, which is given by:

ΔH = [tex]H_{products} - H_{reagents}[/tex]

For the reaction 2Fe₂O₃(s) ⇒ 4FeO(s) + O₂(g):

Enthalpy of Reagent (Fe₂O₃(s))

Enthalpy of formation for Fe₂O₃(s) is - 822.2 kJ/mol

The reaction needs 2 mols of the molecule, so:

H = 2(-822.2)

H = - 1644.4

Enthalpy of Products (4FeO(s) + O₂(g))

Enthalpy of formation of O₂ is 0, because it is in its standard state.

Enthalpy of formation of FeO is - 272.04 kJ/mol

The reaction produces 4 mols of iron oxide, so:

H = 4(-272.04)

H = -1088.16

Change in Enthalpy:

ΔH = [tex]H_{products} - H_{reagents}[/tex]

ΔH = - 1088.16 - (-1644.4)

ΔH = + 556.2 kJ/mol

The change in enthalpy is positive, which means that the reaction is absorving heat. Then, the chemical reaction is Endothermic.

2) When Fe₂O₃(s) reacts, heat is absorbed because it is an endothermic reaction.

3) Calculate how many mols there is in 94.2 g of Fe₂O₃(s):

n = [tex]\frac{mass}{molar mass}[/tex]

n = [tex]\frac{94.2}{160}[/tex]

n = 0.6 mols

In the reaction, for 2 mols of Fe₂O₃(s), 556.2 kJ are absorbed. Then:

2 mols --------------- 556.2 kJ

0.6 mols ------------- x

x = [tex]\frac{0.6*556.2}{2}[/tex]

x = 167 kJ

It will be absorbed 167 kJ of energy, when 94.2 g of Fe₂O₃(s) reacts.

Answer:

The density would be larger than the correct value.

Explanation:

First off, the realtionship between denisty and volume is given in the equation below;

Density = Mass / Volume

From this equation, Density is inversely proportional to volume. This means as the volume increases, the density decreases and as the volume decreases the density increases.

Assuming all thing's being normal;

Mass = 2g

Volume = 10ml

Density = 2 / 10 = 0.2 g/ml

Second case scenario;

'your pipet was incorrectly calibrated so that it transferred less than 10.00 mL"

Lets have a value of 8ml for our volume. Mass remains constant.

Density = 2 / 8 = 0.25 g/ml

The density would be larger than the correct value.

Answer: The density would be larger than the correct value.

First off, the relationship between density and volume is given by:

Density = Mass / Volume

From this equation, Density is inversely proportional to volume. This means as the volume increases, the density decreases and as the volume decreases the density increases.

Assuming all thing's being normal;

Mass = 2g

Volume = 10ml

Density = [tex]\frac{2}{10}=0.2[/tex]   g/ml

Second case scenario;

'your pipet was incorrectly calibrated so that it transferred less than 10.00 mL"

Lets have a value of 8ml for our volume. Mass remains constant.

Density = [tex]\frac{2}{8}= 0.25[/tex]  g/ml

The density would be larger than the correct value.

Learn more: https://brainly.com/question/11107994

Explanation:

N2O4(g)  <----------> 2NO2(g)

Before proceeding,

A chemical equilibrium can be defined as a condition in the course of a reversible chemical reaction in which no net change in the amounts of reactants and products occurs.

Statement 1.

This statement is false. Equilibrium is not about equal concentrations but rather zero change in concentration of the reactants and products.

Statement 2.

This statement is True in chemical equilibrium; the forward and reverse reactions occur at equal rates.

Statement 3.

This statement is False. The rate constant for the forward reaction is not equal to the rate constant of the reverse reaction.

Statement 4.

The concentration of NO2 divided by the concentration of N2O4 is NOT equal to a constant. To obtain a constant value irregardless of the concentrations, the concentration of NO2 must be squared. This comes from the stoichiometry of the reaction

Kc= [NO2]2 / [N2O4]

This statement is false.

Answer:

five(5) hydrogen are formed

Answer: Heterogeneous (Colloid)

Explanation: This is because your solution is a colloid. A colloidal solution has particles between 40 and 900 nm and as the laser light shines through the paint and Water mixture, the paint particles scatter the light because of the Tyndall Effect (Named after the physicist John Tyndall). A Colloidal Solution is a heterogeneous solution that looks like its homogeneous but is a mixture of very small particles that don't really become a solution.

A small amount of red paint is mixed with water. When a laser pointer shines through the mixture, the beam is clearly visible in the mixture. This mixture is a Heterogeneous.

A mixture is a substance made by combining two or more dissimilar chemical compounds that are not chemically linked in chemistry. When two or more substances are physically combined, their identities are maintained, and the mixture takes the shape of solutions, suspensions, or colloids.

Chemical elements and compounds, among others, can be mechanically blended or mixed to create mixtures without causing any chemical bonding and other chemical change, preserving the chemical characteristics and makeup of each ingredient. A small amount of red paint is mixed with water. When a laser pointer shines through the mixture, the beam is clearly visible in the mixture. This mixture is a Heterogeneous.

Therefore, the mixture is Heterogeneous mixture.

To know more about mixture, here:

https://brainly.com/question/12160179

#SPJ2

Answer:

Molecular formula for the gas is: C₄H₁₀

Explanation:

Let's propose the Ideal Gases Law to determine the moles of gas, that contains 0.087 g

At STP → 1 atm and 273.15K

1 atm . 0.0336 L = n . 0.082 . 273.15 K

n = (1 atm . 0.0336 L) / (0.082 . 273.15 K)

n = 1.500 × 10⁻³ moles

Molar mass of gas = 0.087 g / 1.500 × 10⁻³ moles = 58 g/m

Now we propose rules of three:

If 0.580 g of gas has ____ 0.480 g of C _____ 0.100 g of C

58 g of gas (1mol) would have:

(58 g . 0.480) / 0.580 = 48 g of C  

(58 g . 0.100) / 0.580 = 10 g of H

 48 g of C / 12 g/mol = 4 mol

 10 g of H / 1g/mol = 10 moles

The molecular formula of the compound is C4H10.

At STP;

P = 1 atm

T = 273 K

V = 33.6 mL or 0.0336 L

R = 0.082 atmLK-1mol-1

n = ?

Hence;

n = PV/RT

n = 1 atm × 0.0336 L/0.082 atmLK-1mol-1 × 273 K

n = 0.0015 moles

Number of moles = mass/molar mass

Molar mass= Mass/Number of moles

Molar mass = 0.087 g/0.0015 moles

Molar mass = 58 g/mol

Mass of carbon = (58 g × 0.480) / 0.580 = 48 g of C  

Mass of hydrogen = (58 g × 0.100) / 0.580 = 10 g of H

Number of moles of carbon = 48 g of C / 12 g/mol = 4 mol

Number of moles of hydrogen = 10 g of H / 1g/mol = 10 moles

Formula of the compound must then be C4H10.

Learn more: https://brainly.com/question/2510654

Answer:is increase and more collisions :)

Explanation:

Answer:

dimethoxy(phenyl)methanol

Explanation:

For this question, we have to remember the mechanism of the Grignard reaction. In this case, phenylmagnesium bromide is our nucleophile, a carbo-anion is produced (step 1). Then this carbo-anion can attack the carbonyl group in the dimethyl carbonate, the double bond is delocalized into the oxygen producing a negative charge (step 2). Finally, with the addition of the hydronium ion ([tex]H_3O^+[/tex]), the anion can be protonated to produce the alcohol (dimethoxy(phenyl)methanol) (step 3).

See figure 1

I hope it helps!

Answer:

I think it would be the Dead Sea

Explanation:

Because the dead sea is already usually in the warmer temperatures, the boiling point of the water would be lower than the rest.

Answer: Through years of studying and research ;

Graphite has shown that in weak and quantizing magnetic fields it is  material is a highly anisotropie diamagnetic substance whose non-oscillating part of the magnetic suscepti- bility weakly depends on magnetic field.

Explanation:

Diamagnetism is a (very) weak form of magnetism which is caused (induced) by a change in the orbital motion of electrons mostly  due to an applied magnetic field.

Answer:

Whenever a system in equilibrium gets disturbed, the adjustment of the system is done in such a manner that the effect of the change gets nullified, this is known as Le Chatelier's Principle. Let us consider that if a reaction present in an equilibrium gets disturbed by changing pressure, concentration, pressure, or other things, then the reaction will move in such a manner so that it can attain the equilibrium again.  

Based on the given question, the equation is:  

HF (aq) + H2O (l) ⇒ H3O+ (aq) + F- (aq)

a) When HCl is added, the dissociation of HCl takes place within the water to give rise to Cl- and H3O+ ions. One can witness an overall enhancement in the H3O+ ions concentration and the shifting of the equilibrium will take place in the backward direction based on the Le-Chatelier's principle. Thus, on adding HCl, the concentration of H3O+ and F- ions decreases, and the concentration of HF increases.  

b) When the addition of a strong electrolyte like KF is done, the dissociation of KF is done into the F- and K+ ions. Thus, with the overall enhancement in the F- ions concentration, the shifting of equilibrium will take place in the backward direction based on the Le-Chatelier's principle. Thus, with the addition of KF, the concentration of H3O+ and F- ions decreases, and HF increases.  

c) With the addition of strong electrolytes like NaCl in the solution, the dissociation of NaCl takes place into the Cl- and Na+ ions. With the addition of NaCl, the equilibrium is not disturbed as the ions exhibit no influence on the given equilibrium reaction. Thus, the concentration of H3O+, HF, and F- ions remains unmodified.  

d) With the addition of KOH, the dissociation of KOH takes place into K+ and OH- ions. Based on Le-Chatelier's principle, the equilibrium will shift in the forward direction as the produced OH- ions will consume the hydronium ions. Therefore, the concentration of H3O+ and F- ions increases, while the concentration of HF decreases.  

e) With the addition of HF, that is, a weak acid, the equilibrium will move in the forward direction to counter the change as the concentration of reactant increases. Therefore, the H3O+ and F- ions decreases, and the concentration of HF increases.  

On adding HCl & KOH to the equilibrium concentration of hydronium ion changes, on adding KF concentration of fluoride ion changes, on adding NaCl no change occur and on adding HF concentration of both ion increases.

According to the equilibrium law whenever any stress is applied at the equilbrium state of chemical reaction, then the equilibrium will move on that direction where the effect of the applied stress will decreases.

Given chemical reaction is:

HF (aq) + H₂O (l) ⇄ H₃O⁺ (aq) + F⁻ (aq)

Hence affect on the equilibrium was discussed above.

To know more about equilibrium law, visit the below link:
https://brainly.com/question/2943338

Answer:

Explanation:

attached here is the diagram representing the structure

Answer:

C. A positive and a negative ion

Explanation:

Acids and bases are made up of charged particles known as ions. The ions present in acids are oppositely charged and are held together by strong electrostatic forces. When acids or bases are dissolved in water, the electrostatic forces holding their individual molecules together are weakened and these ions are free to move apart in a process known as dissociation. Dissociation occurs because of the attraction between the positive and negative ions in the acid and bases and the negative and positive polarity of water.

For example, when an acid like hydrochloric acid is dissolved in water it dissociates into positive and negative ions as follows:

HCl(aq) -----> H+ + Cl-

When a base like sodium hydroxide is dissolved in water, it dissociates into positive and negative ions as follows:

NaOH(aq) ----> Na+ + OH-

Answer:

yeah C is correct

Explanation:

Answer:

O2

Explanation:

Answer:

o2

Explanation:

edge

Answer:

158.7 g

Its the right answer