Answer:
a) F = 5.14 10⁻⁸ Hz, f = 4.76 10-8 Hz, b) v = 2.29 m / s, f = 42.5 Hz
Explanation:
a)This problem has two parts.
For the calculations relative to the planet Venus, we use that the period and the frequency are related
f = 1 / T
frequency of the orbit around the Sun
Let's reduce the period to the SI system
T = 225 days (24h / 1days) (3600 s / 1h) = 1.94 10⁷ s
F = 1 / 1.94 10⁷
F = 5.14 10⁻⁸ Hz
rotation frequency
T = 243 d = 2.1 107 s
f = 1 / T
f = 1 / 2.1 107
f = 4.76 10-8 Hz
b) give the data of some marine waves
the speed of the wave can be found with kinematics
v = x / t
v = 50.0 / 21.8
v = 2.29 m / s
If the wavelength is L = 9.28m
this distance is the distance between two consecutive ridges or valleys
λ / 2 = L
λ = 2L
λ = 2 9.28
λ = 18.56 m
the speed of the wave is
v = λ f
f = v /λ
f = 2.29 / 18.56
f = 42.5 Hz
10. Which of the following is an electrical insulator?
A. a penny
B. a bike chain
C. a tree
D. a gold tooth
Answer:
c
Explanation:
every other option is a conductor
A small pebble and one large boulder start at the same height and begin rolling down the side of a mountain. Which object would have less kinetic energy as it crashes on the road at the bottom of the mountain? Justify your selection.
Answer:
The small pebble
Explanation:
Since the potential energy, P.E lost equals kinetic energy, K.E gained,
P.E = K.E
P.E = mgh = K.E
So, K.E = mgh where g = acceleration due to gravity and h = height of drop
Since h and g are constant
K.E ∝ m
So, the kinetic energy of the object is directly proportional to its mass. Thus, the object with the smaller mass has the lesser kinetic energy.
Since the object with the smaller mass is the small pebble, so the small pebble would have less kinetic energy as it crashes on the road at the bottom of the mountain.
How are amplitude, intensity, and
loudness related?
Answer:
Amplitude is a measure of the size of sound waves. It depends on the amount of energy that started the waves. Greater amplitude waves have more energy and greater intensity, so they sound louder. The same amount of energy is spread over a greater area, so the intensity and loudness of the sound is less.
Explanation:
Rank the ten objects from loudest to softest.
WILL GIVE BRAINLIST QUICK!!! How does biodiversity support different varieties of species? (please put short answer)
What has increased the concentration of atmospheric carbon dioxide (CO2)?
Answer:
Carbon dioxide concentrations are rising mostly because of the fossil fuels that people are burning for energy.
What is the energy conversion in an incandescent lightbulb?
Answer:
An incandescent bulb use electrical energy
Explanation:
A tungsten wire is 1.5m long and has a diameter of A current of flows through the wire. The resistivity of the wire is 5.6 * 10 ^ - 8 What is the potential difference across the ends of the wire?
Complete Question:
A tungsten wire is 1.5 m long and has a diameter of 1.0 mm. A current of 60 mA flows through the wire. The resistivity of the wire is 5.6 * 10^-8 Ωm. What is the potential difference across the ends of the wire?
Answer:
Potential difference, V = 0.00642 Volts.
Explanation:
Given the following data;
Diameter = 1 mm to meters = 1/1000 = 0.001 m
Length = 1.5m
Current = 60mA = 60/1000 = 0.06 Amperes.
Resistivity = 5.6 * 10^-8 Ωm
To find the potential difference across the ends of the wire;
First of all, we would determine the cross-sectional area of the wire (circle);
[tex] Radius, r = \frac {diameter}{2} [/tex]
[tex] Radius = \frac {0.001}{2} [/tex]
Radius = 0.0005 m
Area of wire (circle) = πr²
Substituting into the above formula, we have;
Area = 3.142 × (0.0005)²
Area = 3.142 × 2.5 × 10^-7
Area = 7.855 × 10^-7 m²
Next, we find the resistance of wire;
Mathematically, resistance is given by the formula;
[tex] Resistance = P \frac {L}{A} [/tex]
Where;
P is the resistivity of the material.
L is the length of the material.
A is the cross-sectional area of the material.
Substituting into the formula, we have;
[tex] Resistance = 5.6 * 10^{-8} \frac {1.5}{7.855 * 10^{-7}} [/tex]
[tex] Resistance = 5.6 * 10^{-8} * 1909611.712 [/tex]
Resistance = 0.107 Ohms.
Now, we can find the potential difference using the formula;
[tex] V = IR[/tex]
Where;
V represents voltage or potential difference measured in volts.
I represents current measured in amperes.
R represents resistance measured in ohms.
Substituting into the formula, we have;
[tex] V = 0.06*0.107[/tex]
Potential difference, V = 0.00642 Volts.
What's Inertia ????☁️☁️
Explanation:
the inability to change the position from rest to motion or motion to rest by themselves is inertia.
Answer:
Inertia is the property of a body in rest to resist motion or a body in motion to continue to its state of motion unless acted by external forces.
A student has two identical sheets of paper. He crumples one up into a small ball. If he drops the sheet of paper and the ball of paper off a building at the same time, which of the following statements describes the result?
A. The sheet of paper because it is more affected by gravity.
B. The ball of paper hits the ground first because it is more affected by gravity
C. The sheet of paper and the ball of paper hit the ground at the same time.
D. The ball of paper hits the ground first because it has less surface area.
Answer:
B
Explanation:
basically, because the ball "weighs" more now, it will hit the ground quicker. so technically gravity is more affective towards it. the piece of paper kind of floats it's way down. gravity isn't pushing on one force more, but because because the ball weighs more, it technically would be said so. hope this helps!
Answer:
the ball of paper, because it has less surface area.
Explanation:
Which of the following statements about Australian football is TRUE?
A.
The players tend to wear a large amount of padding.
B.
Goals are scored by kicking the ball through goalposts.
C.
Each team has a number of set plays for both offense and defense.
D.
The constant movement of the ball is similar to baseball.
Answer:
B.
Goals are scored by kicking the ball through goalposts.
Explanation:
Which statement is true about the thermal energy of an object? Choose the correct answer.
1. Thermal energy is the internal potential energy of an object.
2.Thermal energy is the heat that is transferred in and out of an object.
3. Thermal energy is the sum of kinetic and potential energy of an object.
4. Thermal energy is the internal kinetic energy of the molecules of an object.
Answer:
the answer is number 2
Explanation:
did this earlier this year
Human resource professionals are reviewing the needs of a company that is
building a new factory. The company needs people who can weld electronic
elements together, test them, and package them securely. The HR
professionals conclude that four kinds of workers could complete this
process. Their work is the HR function of
A. employee retention
B. recruitment
C. selection
D. job design
plz help me
Your friend has a mass of 70 kg and is running at a velocity of 3 m/s. What is their kinetic energy?
Answer:
TINAAA
Explanation:
Help please hurry! ‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️
Two air craft P and Q are flying at the same speed 300m/s. The direction along which P is flying is at right angles to the direction along which Q is flying. Find the magnitude of velocity of the air craft P relative to air craft Q
Answer:
424.26 m/s
Explanation:
Given that Two air craft P and Q are flying at the same speed 300m/s. The direction along which P is flying is at right angles to the direction along which Q is flying. Find the magnitude of velocity of the air craft P relative to air craft Q
The relative speed will be calculated by using pythagorean theorem
Relative speed = sqrt(300^2 + 300^2)
Relative speed = sqrt( 180000 )
Relative speed = 424.26 m/s
Therefore, the magnitude of velocity of the air craft P relative to air craft Q is 424.26 m/s
PLEASEHELP THANK YOU SM
Answer:
I belive it would be the first answer choice.
Explanation:
When the Mass is lower, the ball moves faster so it would have more kintetic energy
What is the nergy of a wave that has a
frequency of 6.32 x 10^20 Hz?
here you go thank bob not me he will be very thankful
An observer in the Northern Hemisphere watches the sky for several hours. Due to the motion of Earth, this observer notices that the stars near the north celestial pole appear to move An observer in the Northern Hemisphere watches the sky for several hours. Due to the motion of Earth, this observer notices that the stars near the north celestial pole appear to move from left to right. nearly vertically upward. counter-clockwise around the celestial pole. from right to left.
Answer:
counter clockwise
Explanation:
The observer in the Northern Hemisphere will notice that the stars near the NCP to move counter-clockwise
Counter - clockwise : The observer will observe this because the earth movement when viewed from the North pole is in a counterclockwise direction, hence the stars will appear to move in an ant-clockwise direction
8.
2
AI
6
HCI
AICI:
+
H
에
싶
Answer:
I'm sorry I can't help you...
Astronomers build optical telescopes on tops of mountains because a. there is less air to dim the light. b. the seeing is better. c. CCDs work better with a beautiful mountain view. Astronomers build optical telescopes on tops of mountains because a. there is less air to dim the light. b. the seeing is better. c. CCDs work better with a beautiful mountain view. all choices, a, b and c choice c only choice a only choice b only choices a and b
Answer: choices a and b
Explanation:
Telescope can be defined as am optical instrument which is designed to observe the distant objects clear and nearer. It comprises of arrangement of lenses which allow the rays of light to be collected. The collected light is focused and the image so produced is magnified in the form of an image. The telescopes are prepared and manufactured on mountains top as this will help in preventing the distortion of light obtain from the star due to the fluctuation of air mass in the atmosphere. The atmospheric distortion affects the resolution, and affects the vision. The atmospheric pressure is low at the mountain tops so it will help in better observation of the sky.
If the maximum moment of force on a door is 10 Nm by an applied force of 2.25 N, then the distance of handle
Answer:
d = 4.44 m
Explanation:
Given that,
The moment of force on a door = 10 N-m
The applied force, F = 2.25 N
We need to find the distance of the handle. The moment of force is given by :
[tex]\tau=F\times r[/tex]
Where
r is the distance of the handle.
[tex]r=\dfrac{\tau}{F}\\\\r=\dfrac{10}{2.25}\\\\r=4.44\ m[/tex]
So, the required distance is equal to 4.44 m.
answer this plsss
The range of human hearing is 20 Hz – 20 000 Hz.
Calculate the longest and shortest wavelengths we can hear.
Explanation:
the velocity of sound in air is 330m/s
and v=fh, where h is wavelength f is frequency,
h=v/f.......(1)
longer wavelength
h=330/20,h=16.5m
shorter wavelength
h=330/20000,h=1.65x10-²m
The lesser frequency was used for finding the longer wavelength since wavelength is inversely proportional to frequency,
thus an increase in frequency brings a decrease in wavelength.
and shorter wavelengths are more high and intense
hope this helps
When naming the compound containing lithium and chlorine, change the
suffix of the anion's name to
O A. ide
B. ite
C. cation
D. anion
Ape_x
Answer: Ide
Explanation:
Just got it right on the quiz
Answer:Ide
Explanation: thats the answer for a pex
A hockey puck slides across the ice with an initial velocity of 7.3 m/s .It has a decleration of 1.1 m/s and is traveling towards the goal 5.0 m away .How much time does the goalie have to stop the puck?
Answer:
t = 6.63 s
Explanation:
Given that,
Initial velocity of the puck, u = 7.3 m/s
Deacceleration of the puck, a = -1.1 m/s²
Distance traveled, d = 5 m
We need to find the time the goalie have to stop the puck. Using equation of motion.
v = u +at
v = 0 (stops)
So,
[tex]u=-at\\\\t=\dfrac{u}{-a}\\\\t=\dfrac{7.3}{-(-1.1)}\\\\t=6.63\ s[/tex]
So, the required time is 6.63 seconds.
PLEASE HELP ME ASAP!!!
Answer:
90
Explanation:
The portion where gas turns to liquid
What is the law of inertia? Give an example of inertia in action.
Answer:
The law of inertia is another name for Newton's first law. Newton's first law states that an object will not change its motion or direction unless a force acts on it. An object at rest will stay at rest and an object in motion will stay in motion if there isn't any force acting on them.
Example: When a car uses its brakes to stop, you sometimes feel like you are sliding forward. That is because the inertia keeps you moving forward, even though the car stopped.
Explanation:
Answer:
Law of inertia is sometimes called Newtons First law of motion.
Newtons first law of motion states that"A body will continue to its state of rest or motion unless external force acted upon it.
When an object is moving to the left and slowing down, what direction is the acceleration?
Answer:
According to our principle, when an object is slowing down, the acceleration is in the opposite direction as the velocity. Thus, this object has a negative acceleration. In Example D, the object is moving in the negative direction (i.e., has a negative velocity) and is speeding up.
Explanation:
1.A motorcycle’s velocity at the top of the hill is 11.0 m/s. 4.0 seconds later it reaches the bottom of the hill with a velocity of 20.0 m/s. What is the acceleration of the motorcycle?
2.A motorcycle’s velocity at the top of the hill is 11.0 m/s. 4.0 seconds later it reaches the bottom of the hill with a velocity of 20.0 m/s. What is the acceleration of the motorcycle?
Answer:
1) as far as I remember
Let's take 20 as vf (final velocity) and 11 as (initial velocity) and 4 as time
So we would use this formula a=vf-vi/t
So 20-11/4
Asnwer 2.25
In 1965, a group of students wore black arm bands to school in protest of American policies in Vietnam. Administrators banned the wearing of armbands on school grounds; however, the students wore them again and were suspended. A lawsuit followed, and the case was eventually taken to the Supreme Court.
Answer:
protected under students first amendment rights
Explanation:
did the studyisland :)