The land is considered degraded when biodiversity is diminished soil is eroded soil is impoverished run-off is contaminated. This statement is true.The most common dietary problem in wealthy countries is over-nutrition. This statement is correct.
The layer of soil that contains both inorganic and organic solids is the A horizon. Land degradation refers to the loss of productivity or usefulness of the land. It is considered to have occurred when the capacity of the land to support human, animal, and plant life or a particular land use has declined due to natural or anthropogenic factors. Land degradation results in soil erosion, decreased soil fertility, diminished biodiversity, and contamination of run-off.
Therefore, all the options provided in the question are correct. The most common dietary problem in wealthy countries is over-nutrition. Overnutrition is a type of malnutrition that occurs when a person consumes too much of a nutrient or nutrients than their body needs. The layer of soil that contains both inorganic and organic solids is the A horizon. The A horizon is the topsoil layer that contains both inorganic and organic solids. This layer is critical for plant growth as it contains nutrients, organic matter, and microorganisms that support plant growth.
To know more about Biodiversity visit here:
brainly.com/question/33175015
#SPJ11
In relation to metamorphic rocks, which statement is FALSE?
Options for Question 14:
As a result of being buried by the addition of overlying material, a rock will experience differential pressure conditions.
A higher metamorphic temperature will promote the formation of larger crystals.
The deduction of protolith can help classify and name a metamorphic rock.
The metamorphic rocks of the Grenville Province were formed under conditions that favored the development of foliation.
Dynamothermal metamorphism produces conditions where flat-lying minerals will tend to align in a parallel fashion.
The statement that is FALSE is: A higher metamorphic temperature will promote the formation of larger crystals.
In reality, a higher metamorphic temperature does not necessarily promote the formation of larger crystals. The size of crystals in a metamorphic rock is primarily influenced by the rate of cooling or recrystallization. Slower cooling or recrystallization allows for the growth of larger crystals, while rapid cooling or recrystallization results in smaller crystals. Temperature alone is not the determining factor in crystal size; other factors such as pressure and the availability of minerals also play significant roles.
learn more about "temperature ":- https://brainly.com/question/27944554
#SPJ11
When two waves meet, what happens at the ocean surface if the
crests and troughs are in phase? What happens if the crests and
troughs are out of phase? Identify the respective terms used to describe these outcomes.
When two waves collide, the amplitude of the new wave is bigger if the crests and troughs of the colliding waves are in phase. This is referred to as constructive interference.
What happens if the crests and troughs are out of phase?When the crests and troughs of the waves are out of phase, the amplitude of the resulting wave is smaller. This is called destructive interference.
Constructive Interference: When the crests of two waves coincide with each other or the troughs of the two waves coincide with each other, then the amplitude of the resultant wave is increased.
This is called constructive interference.
Destructive Interference: When the crest of one wave coincides with the trough of another wave or vice versa, the amplitude of the resultant wave is decreased.
This is called destructive interference.
To know more on waves visit:
https://brainly.com/question/29334933
#SPJ11
How are convergent and divergent plate boundaries related to constructive and destructive plate margins?
Convergent and divergent plate boundaries are related to constructive and destructive plate margins in the following ways:
Convergent Plate Boundaries: These types of plate boundaries are where two tectonic plates come together, causing one to move under the other. This process is also known as subduction. It is related to destructive plate margins as it leads to the destruction of the subducted plate. At the same time, it also causes the formation of volcanic mountains, thus making it a constructive margin.
Divergent Plate Boundaries: These types of plate boundaries are where two tectonic plates are moving away from each other, and new oceanic crust is being formed from the magma that rises to the surface. This process is related to constructive plate margins as it leads to the formation of new crust. The Red Sea is an example of a divergent plate boundary that is still active.Constructive and destructive plate margins:Convergent and divergent plate boundaries are the two types of plate margins.
These plate margins can be further categorized as either constructive or destructive.
Constructive plate margins: These types of plate margins are where two plates are moving away from each other. The gap between the two plates is filled with magma that rises to the surface, leading to the formation of new crust. An example of a constructive plate margin is the Mid-Atlantic Ridge.
Destructive plate margins: These types of plate margins are where two plates are moving towards each other. One plate is subducted under the other, leading to the formation of a subduction zone. As the subducted plate is pushed deeper into the mantle, it melts, leading to the formation of magma. This magma then rises to the surface, leading to the formation of volcanoes. An example of a destructive plate margin is the Pacific Ring of Fire.
To know more about divergent visit:
https://brainly.com/question/31778047
#SPJ11
Listed below are the stages in a normal star's life cycle, regardless of mass. Put these stages in order, then circle the stage during which all stars fuse hydrogen into helium in their core. 1._______ 2.____________ 3._________ 4._________ 5.___________ 6.__________ 7. __________8.__________ 9.__________ A. Planetary nebula or supernova (see next question for more details) B. Pre-main-sequence star/T Tauri star C. Giant star (red or otherwise) D. Asymptotic Giant Branch star/Double/multiple shell-burning giant star (red or otherwise) E. Protostar F. Main-sequence star G. Giant molecular cloud (GMC) H. Supergiant star (red or otherwise) I. Horizontal Branch (HB) star/"He main-sequence" star/possibly a variable star
The stages in a normal star's life cycle, regardless of mass, are given below: Giant molecular cloud (GMC) Protostar Pre-main-sequence star/T Tauri star Main-sequence star Giant star (red or otherwise)Asymptotic Giant Branch star/Double/multiple shell-burning giant star (red or otherwise) Planetary nebula or supernova (see next question for more details) Supergiant star (red or otherwise)Horizontal Branch (HB) star/"He main-sequence" star/possibly a variable star Stars have a life cycle that starts with their birth and ends with their death. The life cycle of a star, however, is influenced by its mass.
As a result, high-mass stars evolve much more quickly than low-mass stars. The stage during which all stars fuse hydrogen into helium in their core is the main-sequence stage. During this stage, the force of gravity is in equilibrium with the radiation pressure generated by nuclear fusion in the star's core. The majority of a star's life is spent in this stage, during which it converts hydrogen to helium by nuclear fusion. This is the phase in which our Sun currently is.
As a result, the correct order is Protostar → Pre-main-sequence star/T Tauri star → Main-sequence star (during which all stars fuse hydrogen into helium in their core) → Giant star (red or otherwise) → Horizontal Branch (HB) star/"He main-sequence" star/possibly a variable star → Asymptotic Giant Branch star/Double/multiple shell-burning giant star (red or otherwise) → Planetary nebula or supernova (see next question for more details) → White dwarf or neutron star or black hole → End.
Learn more about hydrogen
https://brainly.com/question/30623765
#SPJ11
The development of a glacial period requires:
cool summers so that snow doesn't melt and ice sheets can
build.
cold autumns
extra cold winters so there is more snow.
cold springs
The development of a glacial period primarily requires cool summers, where temperatures remain low enough to prevent the melting of snow and allow for the accumulation of ice sheets.
These cool summers play a crucial role in building and sustaining glaciers. Additionally, cold autumns and winters contribute to the formation and growth of glacial ice by providing prolonged periods of cold temperatures and facilitating the accumulation of snow. The extra cold winters are particularly important as they ensure the preservation of snowfall and prevent it from melting. While cold springs are not directly essential for the development of a glacial period, they can contribute to the overall persistence of the icy conditions. Together, these factors create the necessary climate conditions for the formation and expansion of glacial periods.In conclusion, the development of a glacial period is primarily dependent on cool summers, which prevent snow melt and enable the formation of ice sheets.
For more questions on glacial period :
https://brainly.com/question/4165168
#SPJ8
The passages ( long winding tunnels) in the Mammoth Cave national parks were dissolved by running water that has infiltrated through land surface through ______________. Group of answer choices
sandstone layers
shale layers
sinkholes
The passages (long winding tunnels) in Mammoth Cave National Park were dissolved by running water that has infiltrated through the land surface through sinkholes.
Mammoth Cave is a limestone cave system located in Kentucky, United States. Limestone is a type of sedimentary rock that is soluble in water. Over millions of years, water has seeped through the land surface, specifically through sinkholes, which are natural depressions or holes in the Earth's surface that provide a direct route for water to enter underground.
As this water infiltrates into the limestone layers, it reacts chemically with the rock, slowly dissolving it over time. The continuous erosion and dissolution processes have formed the intricate network of passages found in Mammoth Cave. These passages can extend for miles and create a unique underground environment, showcasing the power of water in shaping landscapes.
learn more about "sinkholes":- https://brainly.com/question/5832253
#SPJ11
e) Briefly describe the important aspects of the fault valve behaviour in the formation of mesothermal ore deposits. Focus your answer on fluid and confining rock pressure. What is the most important change that occurs during fault slip that allows the precipitation of precious metals such as gold from a fluid? [3 marks]
Fault valve behavior in the formation of mesothermal ore deposits is influenced by fluid and confining rock pressure. During fault slip, the most important change that occurs is the dilation of the fault zone, which allows the precipitation of precious metals like gold from a fluid.
In the formation of mesothermal ore deposits, fault valves play a crucial role in controlling fluid flow and the deposition of precious metals. A fault valve refers to the opening and closing behavior of a fault zone in response to changes in fluid and confining rock pressure. When the fluid pressure within the fault zone exceeds the confining rock pressure, the fault valve opens, allowing the fluid to flow through the fault zone. Conversely, when the confining rock pressure exceeds the fluid pressure, the fault valve closes, restricting fluid movement.
During fault slip, the shear stress acting on the fault zone causes dilation, creating interconnected fractures and opening up pathways for fluid migration. This dilation of the fault zone enables fluids, which are typically rich in elements such as gold, to infiltrate the fractures and migrate through the fault zone. As the fluid moves along the dilated fault, changes in temperature, pressure, and chemical composition can trigger the precipitation of valuable minerals, including gold.
The dilation of the fault zone during fault slip is crucial for the formation of mesothermal ore deposits. It provides the necessary conditions for the interaction between fluids and host rocks, leading to the deposition of precious metals. Understanding the behavior of fault valves and their relationship with fluid and confining rock pressure is essential for exploring and exploiting mesothermal ore deposits.
Learn more about valve
brainly.com/question/12926213
#SPJ11
Experts estimate that most oil reaching the ocean comes from oil tanker accidents and pipeline breaks. True False
The given statement, Experts estimate that most oil reaching the ocean comes from oil tanker accidents and pipeline breaks is true.
Oil spills from oil tankers and pipelines are considered to be the largest source of oil entering the ocean environment. Every year, millions of gallons of oil are spilled into the ocean due to accidents from these sources. Tanker accidents are the most common because large vessels often operate in hostile conditions and accidents on the high seas can be difficult to detect.
Many of the spills occur due to human error, such as crew failing to properly secure cargo during loading and unloading, or due to vessel structural issues. Pipeline breaks occur due to corrosion, natural disasters, maintenance issues and acts of sabotage. With pipeline spills, the sheer volume of oil is higher as the line can be pressurized, leading to much larger and more catastrophic spills.
Both of these sources of oil pollution clouds the waters with toxic chemicals, threatening local wildlife and habitats and even impacting human health.
know more about ocean environment here
https://brainly.com/question/21104577#
#SPJ11
It is true, the Department of Agriculture and one of its agencies, the U.S. Forest Service, lose money on timber sales in America's national forest. The question is why? The answer is because the federal government does the replanting after the timber is harvested. the federal govemment builds the roads needed to get to the fimber with taxes. all of these answers are correct the logs are being exporting to Canada. the logs are being exporting to Japan. Question 8 2 pts Lack of money and infrastructure to manage protected areas in underdeveloped countries is a major limiting factor to their success. False True : Question 9 2 pts In range management, plants that cows do not eat are called increasers. That means the plants that cows want to eat are called decreasers. With this in mind, why do bumed pastures offer more nutrition for livestock? Because its increasing the decreasers and decreasing the increasers. True Falke
Limited financial resources and inadequate infrastructure can indeed pose significant challenges to effectively managing protected areas in underdeveloped countries. Therefore the statement in question 8 is true.
These challenges may include difficulties in implementing conservation measures, providing adequate protection to wildlife, addressing illegal activities such as poaching, and promoting sustainable land use practices.
The term "increasers" refers to plant species that thrive under heavy grazing pressure, while "decreasers" are plant species that decrease in abundance when subjected to intense grazing. Regarding question 9, the statement is false.
In range management, plants that cows do not eat are not called increasers. When pastures are burned, it can promote the growth of new, more nutritious vegetation that is preferred by livestock. Therefore, the statement "burned pastures offer more nutrition for livestock" is generally true.
Read more about the Department of Agriculture U.S here:
https://brainly.com/question/32189775
#SPJ11
Identify the false statement in the following list. A)Winds blow from areas of low pressure to high pressure. B)Warm humid air rises, creating low pressure areas. C)The coldest atmospheric temperatures occur in the mesosphere. D)Weather occurs in the troposphere.
The false statement in the given list is A)Winds blow from areas of low pressure to high pressure.
What is the reason?Winds blow from areas of high pressure to low pressure, and this fact is described by the pressure gradient force.
The direction of the force is perpendicular to the isobars and towards the low-pressure zone. In the context of the atmosphere, the pressure gradient force causes air to flow from high-pressure regions to low-pressure areas.
It leads to the creation of large-scale atmospheric circulation, which is responsible for the global distribution of precipitation and temperature.
Also, winds blow from areas of high pressure to low pressure, so option A is incorrect.
To know more on Pressure visit:
https://brainly.com/question/30673967
#SPJ11
A food chain consists of algae eaten by snails, which are in turn eaten by crabs. Assuming that primary production of algae is 700 g per m2 per year, and the total trophic efficiency at each trophic level is 10%, how much crab biomass do you expect this habitat could support?
Assuming that primary production of algae is 700 g per m2 per year, and the total trophic efficiency at each trophic level is 10%, this food chain can support 7 g/m²/year of crab biomass.
How to determine?Given, The primary production of algae is 700 g per m² per year.
The total trophic efficiency at each trophic level is 10%.
A food chain consists of Algae eaten by Snails, which are in turn eaten by Crabs.
To calculate the crab biomass this habitat could support; we will have to use the 10% trophic efficiency of the food chain as below:
Algae produced by the habitat = 700 g per m² per year
The amount of Algae eaten by Snails = 700 g per m² per year x 10 %
= 70 g per m² per year
Snails produced by the habitat = 70 g per m² per year.
The amount of Snails eaten by Crabs = 70 g per m² per year x 10 %
= 7 g per m² per year.
Crabs produced by the habitat = 7 g per m² per year.
This food chain can support 7 g/m²/year of crab biomass.
To know more on biomass visit:
https://brainly.com/question/14116877
#SPJ11
1. Describe the afternoon summer winds in coastal areas. Explain why. 2. Describe the before sunrise summer winds in coastal areas. Explain why. 3. Explain the daily summer wind conditions in the mountains. 4. Define: Katabatic Winds 5. Define: Chinook Winds
1. The afternoon summer winds in coastal areas are the sea breeze.
This is because the land heats up faster than the water, leading to the formation of a low-pressure zone over the land and a high-pressure zone over the water. The sea breeze flows from high pressure over the water to low pressure over the land, bringing cooler air from the ocean inland.
2. The before-sunrise summer winds in coastal areas are the land breeze.
This is because the land cools faster than the water at night, leading to a low-pressure zone over the water and a high-pressure zone over the land. The land breeze flows from high pressure over the land to low pressure over the water, bringing cooler air from the land out to sea.
3. The daily summer wind conditions in the mountains are characterized by upslope winds during the day and downslope winds at night.
This is because the mountains heat up faster than the surrounding areas during the day, leading to the formation of a low-pressure zone over the mountains and a high-pressure zone over the surrounding areas. The upslope wind flows from high pressure over the surrounding areas to low pressure over the mountains, bringing cooler air from the surrounding areas up the mountain.
4. Katabatic Winds are cold winds that blow down from high elevations.
They are caused by the cooling of air as it flows downhill, leading to a high-pressure zone at the top of the slope and a low-pressure zone at the bottom. These winds can be strong and can cause significant damage and disruption to local ecosystems.
5. Chinook Winds are warm, dry winds that blow down from the mountains.
They are caused by the warming of air as it flows downhill, leading to a low-pressure zone at the top of the slope and a high-pressure zone at the bottom. These winds can have significant effects on local weather patterns and can cause rapid changes in temperature and humidity.
Read more about afternoon summer winds in coastal areas here:
https://brainly.com/question/14105067
#SPJ11
a) Define permeability. What three features influence this property in a geologic body?
Permeability can be defined as the ability of a geologic body to transmit fluids or air through it. It is the measure of the capacity of the rock or soil to transmit a fluid.
This ability is determined by the pore space and the degree of connectivity between pores. A material with high permeability permits fluids to pass through it more quickly than a material with low permeability.Furthermore, three factors that influence the property of permeability in a geologic body include:Porosity of the material: It is the amount of space between solid particles in a soil or rock mass. Materials with higher porosity can contain more fluid and hence have higher permeability size and shape of the pores: The size and shape of the pores is another factor that influences permeability. Larger pores have higher permeability compared to smaller pores.
The shape of pores also affects the rate of flow of fluids through a material as well as the distribution of the fluids.Connectivity of the pores: It is the degree of connectedness between pores in a soil or rock mass. In geologic bodies, a higher degree of pore connectivity translates into higher permeability. Highly connected pores facilitate the flow of fluids in a geologic mass, resulting in higher permeability.
To know more about Permeability visit:
https://brainly.com/question/32482559
#SPJ11
For frozen dew to form, the near-ground dew point temperature must be ________ the freezing mark and the near-ground air temperature must ________ the freezing mark.
Group of answer choices
below; fall below
above; fall below
below; remain above
For frozen dew to form, the near-ground dew point temperature must fall below the freezing mark, and the near-ground air temperature must remain above the freezing mark.
Dew point temperature is when the air becomes saturated and can no longer hold all its moisture, resulting in condensation. The atmosphere is already at or below freezing when the near-ground dew point temperature falls below freezing (0 degrees Celsius or 32 degrees Fahrenheit).
However, the near-ground air temperature must remain above freezing for frozen dew to form. This is because dew forms when the surface temperature of an object (such as grass or a car windshield) cools below the dew point temperature, causing the moisture in the air to condense and freeze on the surface. If the near-ground air temperature drops below freezing, the water in the air would typically freezes before it has a chance to condense into dew.
Learn more about Dew Point Temperature here:
https://brainly.com/question/13432202.
#SPJ11
"
Recent large landslides and rockfalls at the west entrance of
Zion NP have been triggered by: Group of answer choices
flooding in the Grand Canyon
flooding at the Bryce Canyon
earthquakes in the Colorado Plateau
The main answer to the question above is "earthquakes in the Colorado Plateau. "Recent large landslides and rockfalls at the west entrance of Zion National Park have been triggered by earthquakes in the Colorado Plateau.
What is an earthquake? An earthquake is a natural event that occurs as a result of sudden motion or shaking of the Earth's crust, caused mainly by the release of energy accumulated in rock formations. Earthquakes usually occur along the edges of tectonic plates, where there is the most significant amount of seismic activity.
The most well-known regions for earthquake activity are Japan, Indonesia, and California, where earthquakes are relatively frequent.
to know more about earthquakes visit:
brainly.com/question/30322293
#SPJ11
Question Prompt: What are the points of convergence and
divergence in the approaches to waste management of two specified
wastes in Barbados?
The two specified wastes in Barbados are Municipal Solid Waste (MSW) and Hazardous Waste. The points of convergence and divergence in the approaches to waste management of these wastes are highlighted below.
Convergence approach to Municipal Solid Waste and Hazardous Waste. The point of convergence in the management of MSW and Hazardous Waste is the implementation of the 3Rs (reduce, reuse, and recycle) approach. The 3Rs approach seeks to reduce the amount of waste generated, promote the reuse of waste, and recycle waste. The 3Rs approach is geared towards the reduction of the environmental impact of waste. Divergence approach to Municipal Solid Waste and Hazardous Waste. The approach to the management of Municipal Solid Waste and Hazardous Waste is different in Barbados.
The Hazardous Waste generated in Barbados is considered more hazardous than in some other countries, hence a unique approach to Hazardous Waste management is required. Therefore, the approach to Hazardous Waste management requires a more rigorous process, which is not required for MSW management. In conclusion, the convergence approach to waste management of MSW and Hazardous Waste in Barbados is the implementation of the 3Rs approach. However, the divergence approach is the requirement of a more rigorous process in Hazardous Waste management due to the high hazardous nature of the waste. This process is not required in MSW management.
To know more about divergence visit:
https://brainly.com/question/30726405
#SPJ11
What mode of heat transfer produces prevailing winds? A)conduction B)convection C)radiation D)none of the above
The mode of heat transfer that produces prevailing winds is convection. Therefore, the correct option is (B).
The mode of heat transfer that produces prevailing winds is convection. Convection is the process by which heat is transferred through the movement of fluid or air. In the case of prevailing winds, the Sun's radiation heats the Earth's surface unevenly, causing variations in temperature. As warm air rises from the heated surface, it creates an area of low pressure. Cooler air then moves in to replace the rising warm air, creating a flow or movement of air known as wind. This convection process drives the circulation of air in the Earth's atmosphere, resulting in prevailing winds that blow consistently in certain directions over large areas. These winds play a crucial role in weather patterns, climate systems, and the distribution of heat and moisture across the planet.Therefore, the correct option is (B).For more such questions on Heat transfer:
https://brainly.com/question/31381040
#SPJ8
The narrow zone of high speed air that exists at high altitudes are called 1. Rossby waves 2. jet stream 3. upper-air westerlies 4. polar highs
The narrow zone of high speed air that exists at high altitudes are called-2. jet streams.
What is a jet stream?A jet stream is a narrow, quickly flowing air current found at high altitudes in the earth's atmosphere. Jet streams, which typically flow from west to east, are capable of reaching speeds of up to 275 miles per hour.
Their flows are triggered by complex meteorological forces, including the earth's rotation and differences in atmospheric pressure.
They are usually positioned in between air masses with substantial variations in temperature or humidity.
The jet stream's movement is significant to both meteorologists and airline pilots, as it can influence the timing and accuracy of weather forecasts and flight paths.
Hence, option 2. is correct.
To know more on Jet streams visit:
https://brainly.com/question/31398707
#SPJ11
Imagine a research colony is set up on Titan. What could you use
to provide for the basic necessities such as an atmosphere (in an
enclosure), water, energy source, food production, and building
material. Think in terms of the resources available on the surface of Titan
Titan is the largest moon of Saturn and is the only moon to have a thick atmosphere. Here are some resources available on the surface of Titan which could be used to provide for the basic necessities for the research colony:Atmosphere.
The atmosphere on Titan is made up of nitrogen and methane gas, which could be used to create an enclosed atmosphere. This would require a generator to create the necessary pressure and oxygen levels for human habitation. Water: There is a possibility of the presence of subsurface oceans and lakes on Titan. However, it would be difficult to extract water from them as they are likely to be solid or slushy.
. Another option would be to cultivate algae which can produce a nutritious biomass. Bulding Material: The surface of Titan is covered in a layer of organic material, which could be used as a building material.Thus, the above resources available on Titan could be used to provide for the basic necessities such as an atmosphere, water, energy source, food production, and building material.
To know more about atmosphere visit:-
https://brainly.com/question/32349179
#SPJ11
If you were asked to do a short presentation to a high school class
on the any aspect of the geography of the Middle East, what topic
or issue will you choose to talk about , and why this
issues?
I would choose to talk about water scarcity in the Middle East due to its significant impact on the region's population, environment, and geopolitical dynamics.
Topic - Water Scarcity in the Middle East : Water scarcity is a pressing issue in the Middle East due to its arid climate, limited water resources, and growing population.
I would discuss the challenges faced by countries in the region, such as the uneven distribution of water, overexploitation of aquifers, and the impact of climate change on water availability.
Additionally, I would highlight the socio-economic and environmental consequences of water scarcity, including food security, conflicts over water resources, and the need for innovative solutions like desalination and water conservation.
By focusing on this issue, students will gain an understanding of the complex interplay between geography, politics, and sustainability in the Middle East, and how water scarcity influences regional dynamics.
This topic encourages critical thinking about global challenges and fosters awareness of the need for responsible water management practices.
To know more about water scarcity refer here:
https://brainly.com/question/19920929#
#SPJ11
The Coriolis effect has an impact on which of the following phenomena? Select all that apply A)The amount of light reflected off of a surface B)The direciton of the prevailing winds across the globe C)Regions of high and low pressure D)the number of hours of daylight changing with the seasons
A force created by the rotation of the Earth is known as the Coriolis effect.
In a rotating system, it has an impact on how fluids and things move. Following phenomena exhibit the Coriolis effect's effects:
B) The global wind patterns, specifically their direction
C) Pressure ridges and depressions.
What is it?The Coriolis force changes the direction of winds and ocean currents on the earth's surface.
As a result, it affects weather patterns and climate. Regions of high and low pressure also result from the Coriolis effect.
A) The amount of light reflected off of a surface and D) the number of hours of daylight changing with the seasons are not affected by the Coriolis effect.
Therefore, B) and C) are the correct answers.
To know more on coriolis effect visit:
https://brainly.com/question/31284831
#SPJ11
True / False (write "True" of "False" in the bank) 41) Storm events are usually short-lived so they are not considered an important cause of coastal erosion. 42) The CPRA claims there has been no success in coastal restoration efforts in the last 15 years due to a lack of funding. 43) Invasive species can only negatively affect coastal wetlands if they are large mammals. 44) Minerals are solid, natural, inorganic substances with a crystalline structure and definite chemical composition. 45) Magma with a high gas content will lead to a more explosive volcanic eruption. 46) Tidal flats are more easily viewable at high tide. 47) Removing trees and other vegetation from a hillside can help keep the soils and bedrock in place during large rainfalls.
To write True / False for mentioned statements. 41) Storm events are usually short-lived so they are not considered an important cause of coastal erosion. - False. Storm events are usually short-lived, but they can cause considerable erosion and scouring of the coastline.
42) The CPRA claims there has been no success in coastal restoration efforts in the last 15 years due to a lack of funding. - False. The Coastal Protection and Restoration Authority (CPRA) has achieved some success in coastal restoration efforts in the last 15 years, despite funding issues.
43) Invasive species can only negatively affect coastal wetlands if they are large mammals. - False. Invasive species can have a negative impact on coastal wetlands regardless of their size.
44) Minerals are solid, natural, inorganic substances with a crystalline structure & definite chemical composition. - True.
45) Magma with a high gas content will lead to a more explosive volcanic eruption. - True. High-gas magma is more likely to cause explosive eruptions than low-gas magma.
46) Tidal flats are more easily viewable at high tide. - False. Tidal flats are more easily viewable at low tide.
47) Removing trees and other vegetation from a hillside can help keep the soils and bedrock in place during large rainfalls. - False. Removing trees and other vegetation from a hillside can cause soil erosion and instability, increasing the likelihood of landslides during large rainfalls.
To know more about Storm visit:
https://brainly.com/question/31411923
#SPJ11
Please help me fast
If a barometer reads 755 mmHg at the ground level before rising up a mountain (or a building) with a hight equal to the last 4 digits of your ID number. What will be the reading at the top of the mountain in mmHg? Take the densities of mercury and air to be 13600 kg/m³ and 1.18 kg/m³ respectively.
The barometric pressure at the top of the mountain (or building) is approximately 647.81 mmHg, considering a hypothetical height of 1234 meters and using the given values for air density and the conversion factor.
To calculate the barometric pressure at the top of the mountain (or building), we need to consider the change in pressure with height using the concept of atmospheric pressure gradient.
The change in pressure with height is given by the formula:
ΔP = ρ * g * Δh,
where ΔP is the change in pressure, ρ is the density of air, g is the acceleration due to gravity, and Δh is the change in height.
The density of air (ρ) is 1.18 kg/m³ and the density of mercury is 13600 kg/m³, we can convert the barometric pressure at ground level from mmHg to Pa using the conversion factor 1 mmHg = 133.322 Pa.
Let's assume the height of the mountain (or building) is 1234 meters (using a hypothetical value). Now we can calculate the change in pressure:
ΔP = ρ * g * Δh
= 1.18 kg/m³ * 9.8 m/s² * 1234 m
= 14,287.24 Pa
To convert the change in pressure from Pa to mmHg, we divide by 133.322:
ΔP (mmHg) = 14,287.24 Pa / 133.322 mmHg
≈ 107.19 mmHg
To find the barometric pressure at the top of the mountain, we subtract the change in pressure from the initial reading:
Barometric pressure at the top = 755 mmHg - 107.19 mmHg
≈ 647.81 mmHg
Therefore, the barometric pressure at the top of the mountain (or building) would be approximately 647.81 mmHg.
learn more about "barometric ":- https://brainly.com/question/3083348
#SPJ11
The Great Basin skink can be found in Grand Canyon. In the movie you watched for this assignment, Australian Blutognue skinks live with their young in _______.
rocky crevices spider burrows dense thorn thickets gopher holes
In the movie that was watched for this assignment, Australian Blutongue skinks live with their young in rocky crevices.
Australian Blutongue Skinks are large and docile lizards from Australia. The species is named after their bright blue tongue, which they use as a defense mechanism against predators. They are commonly kept as pets because of their gentle nature, ease of care, and fascinating demeanor. Their small heads, sturdy bodies, and little legs make them appear more snake-like than lizard-like.
They have smooth scales, short legs, and wide bodies, which make them more suited to the ground than to climbing trees. Skinks are omnivorous creatures, which means they eat a variety of both plant and animal material. In the movie watched for this assignment, Australian Blutongue skinks live with their young in rocky crevices.
To know more about Blutongue visit here:
brainly.com/question/31029534
#SPJ11
2. What source of heat is sufficient to cause metamorphism?
Group of answer choices A)Deep burial in the crust. B)Radioactive decay. C)Intrusive magma and deep burial in the crust. D)Intrusive magma.
Metamorphism is a process by which a rock undergoes a change in texture, structure, or composition due to changes in temperature, pressure, or chemical composition. The source of heat that is sufficient to cause metamorphism is deep burial in the crust. Burial metamorphism is caused by deep burial in the Earth's crust under a thick layer of sedimentary rock. So option a is the correct one.
Burial metamorphism is typically a slow process that occurs over millions of years and can cause significant changes in the rock. As the rock is buried deeper and deeper, the pressure and temperature increase, causing the minerals in the rock to recrystallize. This can lead to changes in the texture and composition of the rock, as well as the formation of new minerals.
Burial metamorphism is often associated with sedimentary rocks, such as sandstone and shale, which are commonly buried under thousands of feet of sediment. The heat and pressure from the overlying sediment can cause the rock to undergo metamorphism, resulting in the formation of new minerals and a change in texture and structure. In summary, deep burial in the crust is the source of heat that is sufficient to cause metamorphism.
To know more about Metamorphism visit:
https://brainly.com/question/32914798
#SPJ11
Several models of ecological succession have been proposed.
Which model has the following characteristics: early species modify
the environment enabling survival of intermediate species which
also modify the environment making it less suitable for early species and more suitable for late-stage species, and then the late-stage Climax species do not change the environment in ways that favor other species?
a. Tolerance Model
b. Nutrient Depletion Model
c. Inhibition Model
d. Facilitation Model
d. Facilitation Model early species modify the environment enabling the survival of intermediate species which also modifies the environment making it less suitable for early species and more suitable for late-stage species
Ecological succession is defined as the gradual process of change and replacement of different species in an ecosystem over time. Several models of ecological succession have been proposed and these include the tolerance model, nutrient depletion model, inhibition model, and facilitation model. The Facilitation Model is one of the models proposed in ecological succession. In the Facilitation Model, early species modify the environment in such a way that they enable the survival of intermediate species. The intermediate species in turn modify the environment, making it less suitable for early species and more suitable for late-stage species.
Late-stage Climax species do not change the environment in ways that favor other species. The model of ecological succession that has the above-mentioned characteristics is the Facilitation Model. It is worth noting that the Facilitation Model is a type of ecological succession where early colonizers pave the way for other species to succeed them. These early species modify the environment in a way that enables the survival of the intermediate species.
To know more about Ecological succession visit:
https://brainly.com/question/6282616
#SPJ11
What observations about landscape features are helpful for determining if they were formed by glaciers? If they were formed by glaciers, how can you determine if they are erosional or depositional features?
By combining these observations and understanding the processes associated with glaciers, geologists can make informed conclusions about the formation and nature of the landscape features they encounter.
When examining landscape features to determine if they were formed by glaciers, there are several observations that can be helpful:
1. U-shaped Valleys: Glacial valleys have a distinct U-shape, characterized by steep, straight sides and a broad, flat bottom. This shape is different from the V-shaped valleys formed by rivers.
2. Striations and Grooves: Glaciers often leave behind striations and grooves on bedrock surfaces. These are scratches and lines caused by the movement of rocks and debris embedded in the glacier's base.
3. Erratics: Glaciers transport large boulders and deposit them in areas with different underlying rock types. If you find isolated large boulders in a landscape that doesn't match the local geology, it could be indicative of glacial transport.
4. Moraines: Moraines are accumulations of sediment and debris carried by glaciers. Terminal moraines mark the furthest extent of a glacier, while lateral and medial moraines are formed along the sides and within the glacier, respectively.
5. Drumlins and Eskers: Drumlins are elongated hills with a streamlined shape, formed by glacial erosion and deposition. Eskers are winding ridges of sediment deposited by meltwater streams within or at the margins of glaciers.
Determining whether these features are erosional or depositional requires a closer examination:
1. Erosional Features: Erosional features result from the scraping and cutting action of the glacier as it moves across the landscape. Striations, grooves, and U-shaped valleys are erosional features created by the movement and grinding of the glacier against the bedrock.
2. Depositional Features: Depositional features are formed when glaciers deposit sediment and debris. Moraines, including terminal, lateral, and medial moraines, are examples of depositional features. Drumlins and eskers are also formed through deposition.
To determine if a feature is erosional or depositional, one must consider the context and examine the surrounding landscape. Erosional features are typically found in areas where glaciers have passed through or over, altering the terrain. Depositional features, on the other hand, are commonly found at the end or along the sides of glaciers, where sediments accumulate.
To know more about glaciers landform-
https://brainly.com/question/14067569
#SPJ11
3. explain the principle of stratigraphy and how it results from the process of how sedimentary rock and fossils are formed.
The principle of stratigraphy is based on the formation of sedimentary rocks in distinct layers or strata over time. By studying these layers and the fossils they contain, geologists can determine the relative ages of rocks and reconstruct Earth's geological history.
Sedimentary rocks are formed through the process of deposition, where sediments such as sand, mud, and organic matter accumulate over time. As these sediments settle, they form layers, with each layer representing a distinct period of deposition. These layers can vary in thickness, composition, and fossil content.
The principle of stratigraphy relies on the concept of superposition, which states that in undisturbed rock sequences, the younger rocks are found on top of older rocks. This principle forms the basis for establishing the relative ages of different rock layers and the fossils they contain. By studying the characteristics of these layers, such as the type of sediment, the presence of specific fossils, and the composition of the rock itself, geologists can reconstruct the geological history of an area.
Fossils play a crucial role in stratigraphy as they provide evidence of past life forms and help determine the relative age of the rocks in which they are found. Fossils are typically found in specific layers of sedimentary rock, and their presence or absence can indicate the relative age of those layers. By examining the fossil assemblages in different rock layers, scientists can identify and correlate specific periods of time, allowing for the development of a geological timeline.
Overall, the principle of stratigraphy allows geologists to understand the sequence of events that have occurred in Earth's history, including the deposition of sediments, changes in environmental conditions, and the evolution and extinction of organisms. It provides a valuable tool for reconstructing past environments, studying the Earth's geological processes, and unraveling the complex history of our planet.
To learn more about fossil Click Here: brainly.com/question/31419516
#SPJ11
Which statement is TRUE in relation to ocean salinity through time?
Salinity is decreasing, as with global warming rivers are dumping more fresh water from melting glaciers into the oceans.
Ocean salinity has reached an equilibrium, as the addition of dissolved solids equals the removal of dissolved solids by geological, biological and hydrological processes.
Salinity is increasing, as global warming is causing increased evaporation of freshwater from the oceans.
Ocean salinity has reached an equilibrium, as the addition of dissolved solids by volcanic eruptions and the addition of freshwater by rivers are in balance.
Salinity is decreasing, because there are fewer volcanic eruptions that can add dissolved solids to the oceans.
The statement that is TRUE in relation to ocean salinity through time is "Ocean salinity has reached an equilibrium, as the addition of dissolved solids equals the removal of dissolved solids by geological, biological and hydrological processes."
Ocean salinity refers to the concentration of dissolved salts in seawater. While various factors can influence salinity, the overall balance between inputs and outputs of dissolved solids determines whether salinity increases, decreases, or reaches an equilibrium.
The statement that correctly reflects this is that ocean salinity has reached an equilibrium, as the addition of dissolved solids equals the removal of dissolved solids by geological, biological, and hydrological processes.
Salinity is regulated by a dynamic interplay of different processes. The addition of dissolved solids occurs through volcanic eruptions, which release minerals into the oceans.
On the other hand, the removal of dissolved solids happens through various mechanisms, including sedimentation, precipitation of minerals, and biological uptake by marine organisms.
Additionally, the input of freshwater from rivers and the output through evaporation also impact salinity. While global warming and the melting of glaciers can influence freshwater input into the oceans, it is not the primary driver of salinity changes.
The long-term balance of inputs and outputs, including both natural and human-induced factors, determines the equilibrium state of ocean salinity.
To know more about salinity refer here:
https://brainly.com/question/3312898#
#SPJ11
What sorts of geological, astronomic, and biological factors
lead to climate change?
Some of the geological factors that lead to climate change are volcanic eruptions, Tectonic movements, changes in sea level etc. Some of the astronomic factors include orbital variations and solar output. Biological factors that lead to climate change are greenhouse gas emissions, land use and methane emissions.
Climate change refers to the change and alterations of the Earth's climate system including a rise in temperature, change in wind and rain patterns etc which can create a significant impact on the various organisms on Earth.
Some of the geological factors that can lead to climate change are as follows:
Volcanic Eruptions: Volcanic eruptions release large amounts of gases and particles into the atmosphere. This includes emissions of carbon dioxide (CO2) and sulfur dioxide (SO2) into the atmosphere which impacts the climate system.
Tectonic movements: Tectonic plates on the earth's surface can influence the distribution of continents and oceans. The unforeseen movements in these plates can affect ocean circulation patterns.
Changes in Sea Level: Sea levels can rise as a result of the melting glaciers in the polar region. Rising sea levels can affect coastal regions, leading to unseen storms and tsunamis.
Some of the astronomic factors that can lead to climate change are as follows:
Orbital Variations: Milankovitch cycles refer to the variations in Earth's orbit around the sun, such as changes in its axial tilt, eccentricity and precession. These cycles can influence the solar radiation on Earth, resulting in long-term climate variations.
Solar Output: Variations in the sun's energy output can change the climate system. Increased solar activity can result in higher temperatures, while decreased solar activity can lead to lower temperatures.
Some of the biological factors that can lead to climate change are as follows:
Greenhouse Gases: Change in the biological processes can lead to the emission and absorption of greenhouse gases which includes carbon dioxide and methane.
Land Use: The clearing of forests for agricultural practices or urbanization results in deforestation. This would reduce the Earth's capacity in absorbing carbon dioxide through photosynthesis leading to the emission of greenhouse gases.
Methane Emissions: Agricultural activities and the extraction of fossil fuel leads to methane emissions.
Learn more about climate change, here:
https://brainly.com/question/26648458