It is the highest point in a wave.​

Answer:

3

Explanation:

2,8,6

Answer:

snow is made up of a variety of mostly organic matter, including dead or dying animals and phytoplankton, protists, fecal matter, sand, and other inorganic dust.

Explanation:

I hope I helped!!

Plz mark me brainliest it would really make my day!

Answer:

I think its organic unless we are talking about this snow storm then no

Answer:

1.6666666666666 is the ans bcz in each mole there r 12 grams of carbon so the ans is goingtobe 20÷12

According to the mole concept, there are 1.66 moles in 20 grams of carbon.

Mole is defined as the unit of amount of substance . It is the quantity measure of amount of substance of how many elementary particles are present in a given substance.

It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on the type of substance. Amount of elementary entities in a mole is called as Avogadro's number.

It is widely used in chemistry as a suitable way for expressing amounts of reactants and products.For the practical purposes, mass of one mole of compound in grams is approximately equal to mass of one molecule of compound measured in Daltons. Molar mass has units of gram per mole . In case of molecules, where molar mass  in grams present in one mole  of atoms is its atomic mass.

Number of moles is calculated as, mass/molar mass, thus on substitution , number of moles=20/12=1.66 moles.

Thus, there are 1.66 moles in 20  grams of carbon.

Learn more about moles,here:

https://brainly.com/question/26416088

#SPJ6

Answer:

Explanation:

Mol weight of HCl = 36.5

.90 g of HCl = .90 / 36.5 mole = .02465 mole

HCl      =    H⁺        +      Cl⁻

1 mole     1 mole

1 mole of HCl gives 1 mole of H⁺

.02465 mole of HCl will give .02465 mole of H⁺

.02465 mole of H⁺ in 5 litre soln

concentration of H⁺ =  .02465 / 5 = 4.93 x 10⁻³ M

pH = - log ( 4.93 x 10⁻³ )

= 3 - log 4.93

= 3 - .693

= 2.307

= 2.31

NaOH :

Mol weight of NaOH  = 40

.50 g of HCl = .50 / 40 mole = .0125 mole

NaOH     =    Na⁺        +      OH⁻

1 mole     1 mole

1 mole of NaOH gives 1 mole of OH⁻

.0125 mole of NaOH will give .0125 mole of OH⁻

.0125 mole of OH⁻ in 4 litre soln

concentration of OH⁻ =  .0125 / 4 = 3.125 x 10⁻³ M

pOH = - log ( 3.125 x 10⁻³ )

= 3 - log 3.125

= 3 - .495

= 2.505

pH = 14 - pOH

= 14 - 2.505

= 11.495 .

= 11.50

Answer:

See Explanation

Explanation:

Given:

moles M = 0.600 mole

moles F = excess (for rxn stoichiometry)

Formula Weight (F.Wt.) of F = 19 grams/mole (from Periodic Table)

Yield in grams = 46.8 grams (assuming theoritical yield)

Rxn:         M          +        F₂       =>   MF₂

         0.600mol         Excess          0.600mol (1:1 rxn ratio for M:MF₂)

a. moles of F in MF₂ = 2(0.600) moles F = 1.2 moles F

b. mole weight MF₂ = 46.8g/0.600mol = 78g/mole

    F.Wt. MF₂ = F.Wt. M + 2(F.Wt. F)

     => mass M = F.Wt. M = [F.Wt. MF₂ - 2(F.Wt. F)] = 78g/mol. - 2(19g/mol.)

     = (78 - 38) grams/mole = 40 grams/mole

c. Calcium (Ca) has F.Wt. = 40 grams/mole (compared to Calcium on Periodic Table.

From the question, the metal is the limiting reactant and must be used to obtain the required results which are;

a) There are 1.20 mol F in MF2.

b) There are 40g of M in MF2.

c) M is calcium.

From the reaction equation;

M + F2 ----> MF2

Since the reaction is 1:1, 0.600 mol of MF2 is formed

Note that 1 mole of MF2 contains two moles of F and one mole of M

Hence, number of moles of F in MF2 = 2 *  0.600 mol = 1.20 mol F

Since 1 mole of M is contained in MF2, there are 0.600 moles of M in MF2.

If 1 mol of M forms 1 mole of MF2

And, 0.600 mol of M form 0.600 mol of MF2

Number of moles of MF2 = mass/molar mass

Number of moles of MF2 =  0.600 mol

Mass of MF2 formed = 46.8 g

Molar mass of MF2 = mass/Number of moles of MF2

Molar mass of MF2 = 46.8 g/0.600 mol

Molar mass of MF2 = 78 g/mol

Molar mass = Sum of Relative atomic mass of component atoms.

Hence;

78 = M + 2(19)

M = 78 - 2(19)

M = 40 g

The element must be calcium

Learn more: https://brainly.com/question/17275626

Answer: The products of electrolysis are Zn(l) and [tex]Cl_2[/tex] gas

Explanation:

Electrolysis of a subastance is breaking it into its constituents by the action of electrical current.  

In the electrolysis of molten zinc chloride, zinc metal is produced at the cathode which is a negative electrode and chlorine gas produces as the anode which is a positive electrode.

[tex]ZnCl_2(l)\rightarrow Zn^{2+}+2Cl^-[/tex]

At anode : [tex]2Cl^-(l)\rightarrow 2e^-+Cl_2(g)[/tex]

At cathode : [tex]Zn^{2+}(l)+2e^-\rightarrow Zn(l)[/tex]

Answer:

Recycling.

Explanation:

When instead of getting rid of a product you find another use for the product, it is called recycling.

Recycling can be defined as a process which typically involves gathering, processing and transformation of materials or products that would otherwise be gotten rid of as waste materials or trash into new products that could be used for another purpose.

Basically, the recycling process involves turning a trash or unwanted product into a treasure (new product) that is capable of serving another purpose.

For example, the crown cork of a bottle could be gathered and processed into art forms that can be used for decorations.

Answer:

The percent composition for nitrogen in chromium(III) nitrate is 6%.

Explanation:

The mass percent of nitrogen in chromium(III) nitrate is 17.655%.

Calculation,

Molar mass of one oxygen = 16 g

molar mass of nine oxygen = 9 × 16 g = 144 g

molar mass of one nitrogen atom = 14 g

molar mass of three nitrogen atom = 3 × 14 g = 42 g

molar mass of one chromium atom = 51.99 g

molar mass of chromium (III) nitrate molecule = 144 g + 42 g + 51.99 g = 237.99 g

Mass percent of nitrogen = mass of three nitrogen atom× 100 /mass of chromium(III)nitrate

Mass percent of nitrogen = 42 g/237.99 g × 100 = 17.655%

The percentage of the mass of the element or solute divided by the mass of the compound or solute is called mass percentage

learn about mass percentage,

https://brainly.com/question/16885872

#SPJ2

Answer:

the change in energy of the gas mixture during the reaction is 227Kj

Explanation:

THIS IS THE COMPLETE QUESTION BELOW

Measurements show that the enthalpy of a mixture of gaseous reactants increases by 319kJ during a certain chemical reaction, which is carried out at a constant pressure. Furthermore, by carefully monitoring the volume change it is determined that -92kJ of work is done on the mixture during the reaction. Calculate the change of energy of the gas mixture during the reaction in kJ.

From thermodynamics

ΔE= q + w

Where w= workdone on the system or by the system

q= heat added or remove

ΔE= change in the internal energy

q=+ 319kJ ( absorbed heat is + ve

w= -92kJ

If we substitute the given values,

ΔE= 319 + (-92)= 227 Kj

With the increase in enthalpy and there is absorbed heat, hence the reaction is an endothermic reaction.

Answer:

liquid

Explanation:

it's not plasma, solid, or gas

so I think liquid

Answer:

0.03947 atm

Explanation:

The relationship between mmHg and atm is given as;

1 atm = 760 mmHg

x atm = 30 mmHg

Upon solving for x;

x * 760 = 30 * 1

x = 30 / 760 = 0.03947 atm

Answer: D pancreas

Explanation: testes are for male ovary are for female one human can have both

Answer:

3.0g remain

Explanation:

The half-life is defined as the time required for a reactant to decrease its concentration in exactly the half of the initial amount of reactant. Having this in mind:

In one half-life, the mass will be:

24.0g / 2 = 12.0g

In two half-lifes:

12.0g / 2 = 6.0g

And in three half-lifes, the mass that remain is:

6.0g / 2 =

Answer:

Copper, Water, and Oxygen

Explanation:

Because they are compounds and compounds are pure substances <3

Answer: copper

Explanation: because all of the atoms that make up copper are copper i.e its not a compound or mixture. not made od molecules

Answer:

Red goes in the spiky yellow box. Green goes where the red circles are. Blue goes in the small yellow box that is pointing to the line.

Explanation:

The focus of an earthquake is where it starts in the earth. The epicenter is the part directly above the focus on the surface. The fault is the part where the earth's crust splits.

Answer:

false

Explanation:

An electric field may do work on a charged particle, while a magnetic field does no work.

Answer:

The answer to this is solids!

Answer:

Rocks are classified according to characteristics such as mineral and chemical composition, permeability, texture of the constituent particles, and particle size. This transformation produces three general classes of rock: igneous, sedimentary and metamorphic. Those three classes are subdivided into many groups.

Explanation:

Answer:

Answer: When water freezes, water molecules form a crystalline structure maintained by hydrogen bonding. Solid water, or ice, is less dense than liquid water. Ice is less dense than water because the orientation of hydrogen bonds causes molecules to push farther apart, which lowers the density.

Explanation:

Answer:

4 is the answer

Explanation:

i am not sure for this question

Answer:

0.25 of the original

Explanation:

(0.5)^(90/45)

The fraction of iron-59 after 90 days is 0.25.

Iron-59 decays following first-order kinetics. Given the half-life ([tex]t_{1/2}[/tex]) of 45 days, we can calculate the rate constant (k) using the following expression.

[tex]k = \frac{ln2}{t_{1/2}} =\frac{ln2}{45day} = 0.015 d^{-1}[/tex]

For first-order kinetics, we can find the fraction of Fe ([Fe]/[Fe]₀) after and an elapsed time (t) of 90 days, using the following equation.

[tex]\frac{[Fe]}{[Fe]_0} =e^{-k \times t } = e^{-0.015 d^{-1} \times 90 d } \approx 0,25[/tex]

The fraction of iron-59 after 90 days is 0.25.

You can learn more about kinetics here:

https://brainly.com/question/2284525

28 mol CaF

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Atomic Structure

Stoichiometry

Step 1: Define

[Given] 1.7 × 10²⁵ molecules CaF

[Solve] moles CaF

Step 2: Identify Conversions

Avogadro's Number

Step 3: Convert

Step 4: Check

Follow sig fig rules and round. We are given 2 sig figs.

28.2298 mol CaF ≈ 28 mol CaF

Answer:

1

Explanation seems right

The magma and sediments formed in the great plains are came from the rocks of the rocky mountains. Therefore, claim 1 is correct.

Sedimentation is the geographical process of accumulation or deposition of the minerals and organic particles from the earth's surface is called sedimentation. This process results in the formation of sedimentary rocks.

Weathering or erosion of rocks by wind, water or other chemicals leads to the geological debris which then move to other places  deposits somewhere.

Rocks in the rocky mountains undergo erosion and the mass movements created by wind or water leads to the sedimentation of these rocky solids to other places. The rocks in the Great planes are reached there by the mass movement of the rocks of rocky mountains. Hence, claim 1 is correct.

To find more on sedimentation, refer here:

https://brainly.com/question/14306913

#SPJ5

Answer:

That is the Atomic mass

Explanation:

The element symbol is S, Element name is sulfur, and

Atomic number is 16

Answer:

B) The family car

Explanation:

I hope this helps :)