in the oxidation reaction of 9-fluorenol with sodium hypochlorite solution and glacial acetic acid, what is the reducing agent? enter the correct chemical name of the reducing agent.

If forty five percent by mass of a 350 g mixture is composed of compound a, then 157.5 g of the mixture is compound a.

Percentage by mass, mass %, is a measure of concentration that indicates the mass of solute per mass of solution. In other words, the mass percent of a component in the solution is defined as the ratio of the mass of the component to the mass of the solution, expressed as a percentage.

mass % = (mass of solute / mass of solution) x 100

Substitute the given information into the equation.

mass % = 45

mass of solution/mixture = 350 g

Solve for the mass of compound a.

mass % = (mass of compound a / mass of mixture) x 100

45 = (mass of compound a / 350 g) x 100

mass of compound a = 157.5 g

Learn more about the percentage by mass here: brainly.com/question/27574467

#SPJ4

When cloudy appearensce or turbidity appear in the solution, it shows that there is a precipitation and this compound is not dissolve in solvent. Here the compound settle down to thebottom of test tube so it is insoluble.

A substance is remember which has a particular composition and precise homes. every natural element is a substance. every natural compound is a substance. Examples of substances: Iron is an element and subsequently is likewise a substance. Methane is a compound and consequently is likewise a substance.

Learn more about chemical compound here:-

brainly.com/question/26487468

#SPJ4

Disclaimer:- Your question is incomplete, please see below for the complete question.

A novice scientist would like to test the solubility of an unknown compound. she adds a known amount of the compound to a test tube that holds 10 ml of water. she swirls the solution, mixing the substances together and places the test tube in a rack. a cloudy film begins to form near the bottom of the test tube. one possible conclusion might be that .

A. The compound miscible in water.

B. The compound is insoluble in water.

C. The compound is polar

D. The compound is unsaturated.

The first ionization energies of the elements increases as you go from left to right across a period of the periodic table, and as you go from the bottom to the top of a group in the table, atomic radius increases.

A chemical element's atomic radius, which is typically the average or typical distance between the nucleus's core and the outermost isolated electron, serves as a gauge for the size of an atom.

There are numerous non-equivalent definitions of atomic radius, since the border is not a clearly defined physical entity.

As we move across a row of the periodic table from left to right, the initial ionization energy rises. In the periodic table, the initial ionization energy falls as we move down a column.

Thus, option A is correct.

To learn more about atomic radius, follow the link;

https://brainly.com/question/14544878

#SPJ1

Answer:

The answer is B

Explanation:

0.25 + 0.39= 0.64

If the two solutions are separated by a semi-permeable membrane, during osmosis the molarity of A increases as water molecules move to B  across the membrane. The correct option is A.

Osmosis is the movement of water molecules across a semi-permeable membrane from a region of high concentration or low solute concentration to a region of low concentration or high solute concentration.

Osmosis is described as a special form of osmosis that is driven by differences in the concentration gradient across the semi-permeable membrane.

For example, given two solutions of concentration of 0.10 M and 0.20 M separated by a semi-permeable membrane, water molecules will move from the 0.1 M solution to the 0.2 M solution.

Learn more about osmosis at: https://brainly.com/question/2811191

#SPJ1

Taking into account the reaction stoichiometry, 16 moles of CuFeS₂ are used to produce 16 moles Cu.

In first place, the balanced reaction is:

2 CuFeS₂ + 5 O₂  → 2 Cu + 2 FeO + 4 SO₂

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The following rule of three can be applied: If by reaction stoichiometry 2 moles of Cu are formed by 2 moles of CuFeS₂, 16 moles of Cu are formed by how many moles of CuFeS₂?

moles of CuFeS₂= (16 moles of Cu× 2 moles of CuFeS₂)÷ 2 moles of Cu

moles of CuFeS₂= 16 moles

Finally, 16 moles of CuFeS₂ are needed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

brainly.com/question/24653699

#SPJ1

Spectrochemical series is defined as a list of ligands according to their strength.

Ligands are classified into two types which are strong ligand and weak ligand. The classification of ligands is done on the basis of the properties which are listed below.

Properties of ligands:

The significance of this is that it helps to ascertain the relative frequency of the absorption band etc.

NH₃ is a strong field ligand and it is placed in the middle of the spectrochemical series.

Learn more about spectrochemical series from the link given below.

https://brainly.com/question/28304989

#SPJ4

True: when using vsepr theory to determine molecular shape, a triple bond counts as a single electron domain even though it consists of three shared electron pairs.

The fundamental idea behind VSEPR is that the valence electron pairs that surround an atom have a tendency to reject one another and would therefore arrange themselves in a way to minimise this repulsion. In turn, this lowers the energy of the molecule and raises its stability, which establishes the molecular geometry. The electron-electron repulsion resulting from the Pauli exclusion principle, rather than the electrostatic repulsion, has been stressed by Gillespie as being more significant in dictating molecule geometry.

To know more about VSEPR theory, click here,

brainly.com/question/14225705

#SPJ4

molecular shape of each molecule Linear and the bond angle for each molecule 180 degrees.

VSEPR Guidelines

Determine the main atom.

tally the valence electrons in it.

For every atom with a bond, add one electron.

For charge, add or subtract electrons (see Top Tip)

To determine the total, divide them by 2.

the quantity of electron pairs.

Make a shape prediction using this

Learn about typical molecular geometries include linear, trigonal planar, bent, tetrahedral, and trigonal pyramid, as well as how Lewis structures can be used to predict the shape of a molecule.

When predicting molecular geometry, the valence shell electron-pair repulsion theory, or VSEPR, is frequently used. According to the hypothesis, the repulsion between electron pairs on a core atom, whether they form bonds or not, will determine how a molecule is shaped.

learn more about molecular geometry visit:

https://brainly.com/question/7558603

#SPJ4

Pressures evaluated in comparison to a differential U-type manometer. For two open flasks, I and ii, different amounts of the same liquid are present in each.

Let's say a 10 cm point is used to gauge the pressure. The Differential U-type Manometer is used to calculate the difference in pressure between two pipes or sources. When two limbs of a liquid are separated vertically from its surface and each limb is connected to two different sources, a differential U-type Manometer is used to compare the pressures in the two pipes or containers that each limb is located in. Its official name is U-type Manometer. Pressure is the amount of force delivered per unit area perpendicular to an object's surface. "p" or "P" is the sign for it.

Learn more about U-type Manometer here

https://brainly.com/question/24188248

#SPJ4

The balanced net ionic equation for the reaction when ZnI₂ and Pb(ClO₄)₂ are mixed in aqueous solution is as given,

ZnI₂ + Pb(ClO₄)₂ → PbI₂ + Zn(ClO₄)₂

Here, Zinc iodide (ZnI₂) reacts with Lead(II)perchlorate (Pb(ClO₄)₂) and give Lead(II)iodide (PbI₂) and Zinc perchlorate (Zn(ClO₄)₂).

ZnI₂ → Zn²⁺ + I₂⁻

Pb(ClO₄)₂ → Pb²⁺ + (ClO₄)₂⁻

Pb²⁺ + I₂⁻  → PbI₂

Zn²⁺ + (ClO₄)₂⁻  → Zn(ClO₄)₂

Here, ZnI₂ breaks down and give Zn²⁺ and I₂⁻.

similarly, Pb(ClO₄)₂ breaks down and give Pb²⁺ and (ClO₄)₂⁻.

Hence, Pb²⁺ and  I₂⁻ reacts with each other and make PbI₂.

And Zn²⁺ and (ClO₄)₂⁻  reacts with each other and make Zn(ClO₄)₂.

So, ZnI₂ reacts with Pb(ClO₄)₂ and produce PbI₂ and Zn(ClO₄)₂.

To learn more about Ionic equation, here :

https://brainly.com/question/28895290?referrer=searchResults

#SPJ4

The calcium ion concentration, [Ca2+], in 1.5M calcium chloride (CaCl2) is 1.5M. According to the law of conservation of mass, the chloride ion concentration, [Cl1-], must also be 1.5M.

What is concentration?
Concentration in chemistry refers to the quantity of a substance in a given area. The ratio of the solute in a solution to the solvent as well as total solution is another way to define concentration. In order to express concentration, mass per unit volume is typically used. The solute concentration can, however, also be expressed throughout moles as well as volumetric units. Concentration may be expressed as per unit mass rather than volume. Although concentration is typically used to describe chemical solutions, it can be calculated for just about any mixture. Mathematically, concentration is calculated by dividing the mass, moles, or volume of the solute by the mass, moles, or volume of the solution (or, less commonly, the solvent).

This is because for every mole of calcium chloride that is dissolved, one mole of calcium ions and one mole of chloride ions are released into solution. Therefore, the concentrations of both ions are equivalent.

To learn more about concentration
https://brainly.com/question/15351314
#SPJ4

The final liquid volume, which is 500 ml, is equal to the final bitey initial, which is 300 Kelvin. By 200 million L, they were behind. So, after the problem is solved, the temperature will be 750 Kelvin, which can be converted to degrees Celsius. so that we can get 7°C twice

By substituting, we get one atmosphere's initial volume of time, which is 225 ml, divided by the atmosphere's final volume, which is 100 M. L. They number four. 0.25 atmospheres of final pressure are present.

Learn more about the atmospheres,

https://brainly.com/question/24925283

#SPJ4,

The planet's PH decreased, thereby making the water there increasingly acidic.

There are numerous distinct chemicals in seawater. Because when freshwater in water evaporates and salt is left behind, several of these chemicals can be seen. Pure substance made up water and oxygen is called water, or H2O.

Rainwater and dissolved chemical substances combine to become seawater. A great solvent is water. Juices that dissolve other compounds are known as solvents. Numerous solutes are present in the majority of the earth's water, which includes the moisture in oceans, pools, rivers, and ponds.

To know more about Seawater visit:

https://brainly.com/question/16949994

#SPJ4

Malonyl CoA is synthesized by the enzyme acetyl-CoA carboxylase (ACC). The activity of ACC is regulated by several molecules, including cAMP, citrate, and long-chain fatty acids.

cAMP (cyclic adenosine monophosphate) is a second messenger that can be activated by hormones such as glucagon. When cAMP is active, it binds to the regulatory subunit of ACC, inhibiting the activity of the enzyme.

Citrate is a metabolite that can bind to the active site of ACC, preventing the enzyme from synthesizing Malonyl CoA.

Long-chain fatty acids can also affect the activity of ACC. When fatty acids are present, they bind to the regulatory subunit of ACC, activating the enzyme and allowing it to synthesize Malonyl CoA.

Overall, the molecules that regulate the enzymes that synthesize Malonyl CoA are cAMP, citrate, and long-chain fatty acids

To know more about ATP, click below:

https://brainly.com/question/893601

#SPJ4

S, 0 , and N are the heteroatom from the given elements. Specifically, any atom that is not carbon or hydrogen qualifies as a heteroatom.

Heteroatoms are when additional elements like beryllium, vanadium, and chromium partially isomorphously replace the normal framework atoms. The aim is often to modify a material's qualities in order to make it better for a certain use. The term "heteroatoms" refers to atoms that are neither carbon or hydrogen in organic chemistry. The number of atoms that could be present in an organic molecule is significantly smaller in practise than it is in principle, leaving more than a hundred possibilities.

A pure material made entirely of one species of atoms, or a chemical element, is a species of atoms with a specific number of protons in their nuclei. In the universe, chemical elements make up almost all of the baryonic matter. Atoms are moved around into new compounds that are bound together by chemical bonds when various elements experience chemical reactions.

learn more about Heteroatoms here

https://brainly.com/question/24488629

#SPJ4

With the rise in temperature,the conductivity also increases.

With rising temperatures, semiconductors' electrical conductivity rises. The conductivity rises as a result of free mobility between the two bands created when electrons from the valence band are able to jump to the conduction band when the temperature rises.

Electrical Conductivity (EC), which is often expressed in Siemens (S) per distance, gauges a material's capacity to transfer an electrical current over a specific distance (usually m-meter). A conductivity meter is used to determine the conductance and read the electrical charge.

To know more about conductance click the link

https://brainly.com/question/18132856

#SPJ4

The type of products generated during the experiment differ if a primary alcohol were used instead of a secondary alcohol as:

According to how they react with the Lucas reagent, primary, secondary, and tertiary alcohols are categorized.

Primary Alcohols: Unless heated, the solution doesn't change colour. When heated, the solution generates an oily coating.

Secondary Alcohols: In three to five minutes, the solution becomes murky and produces an oily coating (varies based on the solubility).

To learn more visit:

https://brainly.com/question/19425198

#SPJ4

ΔH°rxn = 39013.33 J/mol

           = 39.013 kJ/mol.

What is Calorimeter?

Calorimetry is a branch of science that measures a body's status with regard to temperature in order to look at changes in its physical and chemical composition. The changes could be chemical, like burning, acid-base neutralisation, or physical, such melting or evaporation.

We can calculate the amount of heat (Q) released from the solution using the relation:

Q = m.c.ΔT,

Where, Q is the amount of heat released from the solution (Q = ??? J).

m is the mass of the solution (m of the solution = density of the solution x volume of the solution = (1.0 g/mL)(200 mL)

                                      = 200 g.

c is the specific heat capacity of the solution (c = 4.18 J/g∙°C).

ΔT is the difference in the T (ΔT = final temperature - initial temperature = 23.20 °C - 21.80 °C = 1.4 °C).

∴ Q = m.c.ΔT

     = (200 g)(4.18 J/g∙°C)(1.4 °C) = 1170.4 J.

∵ ΔH°rxn = Qrxn/(no. of moles of AgNO₃).

Molarity (M) is defined as the no. of moles of solute dissolved in a 1.0 L of the solution.

M = (no. of moles of AgNO₃)/(Volume of the solution (L)).

∴ no. of moles of AgNO₃ = (M)(Volume of the solution (L))

                                          = (0.3 M)(0.1 L) = 0.03 mol.

∴ ΔH°rxn = Qrxn/(no. of moles of AgNO₃) = (1170.4 J)/(0.03 mol)

                 = 39013.33 J/mol

                 = 39.013 kJ/mol.

Learn more about Calorimeter from given link

https://brainly.com/question/1407669

#SPJ4

Upper H superscript plus, plus upper O upper H superscript minus right arrow upper H subscript 2 upper O is the equation used to represent the net ionic equation.

Ionic reactions typically take place while anions and cations interact to form a chemical in a liquid medium. When the ions of saline that are transparent in water interact with anyone, water-insoluble salts are produced.

The benefit of creating an ionic equations is that we're able to identify the ions that are contributing to the reaction as a whole. Since spectator ions can be removed from the electrical equation since they can be from both side of the equation, the net ionic measurement only displays the species that are truly involved in the reaction.

To know more about Ionic equation visit:

https://brainly.com/question/15467502

#SPJ4

Answer: B. no reaction

Pipeline is a form of transportation that is restricted to specialist goods like liquids and gases.

Manufacturing companies might use a variety of transportation methods that are used in logistics. However, these differ according on shipment volume, price, and destination. The manufacturing businesses that create liquid, semi-liquid, and gas products are most suited for this form of transportation. Pipeline construction might be expensive, but the expenditures per mile are lower.

They are very specialised and restricted to slurry forms of liquids, gases, and solids. There is no need for packing, and the cost per mile is inexpensive.

Know more about pipelines at:

https://brainly.com/question/22849637

#SPJ4

The resulting solution's molarity containing chloride ions is equivalent to 0.156 M in the equation that follows.

Saltwater and sea salt both include chloride in the form of sodium chloride. Additionally, many veggies contain it. Kelp, rye, tomato, lettuce, onions, and olives are among foods that contain more chloride than others. But lot of meals also include chloride and potassium.

Given the calcium chloride solution:

CaCl₂⇒Ca²+2Cl⁻

Given that calcium chloride has to have a molarity of 0.1 M

The solution's chloride ion concentration is 2 x 0.1 x 0.2 M.

The solution's volume is V = 50 ml, or 0.05 L.

Chloride has a molecular weight of 0.2 x 0.05 x 0.001 mol.

0.400 g of NaCl were added to the mixture.

From NaCl, there are 0.4/58.5 = 0.0068 moles of chloride.

Total number of chloride ions in moles is equal to 0.001 plus 0.0068, or 0.0078 mol.

The total solution's volume is 50 ml, or 0.05 L.

The final solution's chloride ion molarity is:

M = 0.0078/0.05

Molarity = 0.156 M

To know more about chloride visit:

brainly.com/question/14093087

#SPJ4

The reaction between aluminum and oxygen forms aluminum oxide is      4 Al(s) + 3 O₂(g) ⇒2 Al₂O₃(s) .

In excess of oxygen, one mole of aluminum forms 0.5 moles of aluminum oxide. In excess aluminum, one-mole oxygen produces 0.66 moles of aluminum oxide. Aluminum is the limiting reagent in the reaction, so when one mole of aluminum and oxygen each taken, 0.5 moles of aluminum oxide is produced.

Aluminum oxide, an amphoteric oxide with the chemical formula Al₂O₃, has a wide range of applications in numerous industries. In nature, aluminum oxide is amphoteric. Metal oxides that react with both acids and bases to produce salts and water are known as amphoteric oxides.

Hence, aluminum and oxygen forms aluminum oxide.

To know more about Limiting reagent.

https://brainly.com/question/11848702

#SPJ4

The values of x and y are 0.73 cm3 and 0.27 cm3. The masses are obtained by multiplying these values by the densities giving us with 6.54 g and 3.06 g.

First, from reliable sources we get the densities of both the copper and lead. This will give us 8.96 g/cm3 and that of lead is 11.34 g/cm3. We assume that 1 cm3 of this certain mixture is composed of x cm3 of copper and y cm3 of zinc. Such that,

x + y = 1

and 9.60 = x(8.96) + y(11.34)

The values of x and y are 0.73 cm3 and 0.27 cm3. The masses are obtained by multiplying these values by the densities giving us with 6.54 g and 3.06 g.

To learn more about densities visit:https://brainly.com/question/15164682

#SPJ4

The equilibrium law for the nuclide is 0.386 days per one, according to the announcement.

Any form of atoms with a measured lifetime is referred to as a nuclide. Atomic nuclei, also known as nuclides (nuclei of various isotopes), are kept together by the weak nuclear interaction and are made up of Z protons and N nuclei with just a mass of A (mass number=Z+N). The amount of protons increases as the electron configuration does, and protons are given to the nucleus to maintain stability.

t = 2.303 * 1/λ log (A₀/At)

λ = 2.303/t log (A₀/At)

= 2.303/3.40 log (45/12.1)

= 0.677*0.57

= 0.386 day⁻¹

To know more about Nuclide visit:

https://brainly.com/question/9826865

#SPJ4

NADH (nicotinamide adenine dinucleotide) would be the most appropriate electron carrier for accepting two electrons as a hydride ion and then later participating in an anabolic pathway.

What is anabolic?
All living things use a set of processes called metabolism to keep their bodies healthy. Catabolism and anabolism are both included in these processes. By releasing as well as capturing energy to maintain the body functioning well, both assist in organising molecules. These metabolic phases take place simultaneously. The main functions of anabolism are growth and organisation of molecules. Small, straightforward molecules are expanded into bigger, more complex ones during this process. In anabolism, gluconeogenesis is a prime example. At this point, glucose is created by the kidneys and liver from non-carbohydrate sources. When food is digested, the molecules break in the body to be used as energy, which is known as catabolism. The body breaks down large, complex molecules into smaller, simpler ones. Glycolysis is an example of catabolism.

NADH is a key component in many metabolic pathways, including the citric acid cycle. It is known as the "universal electron carrier" because it can accept and donate electrons in different biochemical reactions.

To learn more about anabolic
https://brainly.com/question/12071302
#SPJ4

5g of LiCl is dissolved in 40 ml of water at 17°C. When the temperature of a solution rises to 40.3°C, the molar heat of a LiCl solution is 32.7 kJ/mol.

The molar heat of a solution(ΔH) is calculated by the formula

ΔH=q/n

Where, n-Number of moles

q- Energy of the system

q is calculated by the formula

q=m×c×ΔT

Where ΔT=(T_f-T_i)

T_f=40.3°C, T_i=17°C

ΔT=(40.3-17)°C=23.3°C

c=4.18 J/g°C

The mass of water is

m=40 ml×(1 g/1 ml)=40 g

Plug all values in the formula

q=40g×(4.18 J/g°C)×23.3°C

q=3895.76 J

The molar mass of LiCl is 42g/mol. Therefore, the moles of LiCl is

moles=5g×(1 mol/42 g)

moles=0.11905 mol

Hence, the molar heat of a solution is

ΔH=3895.76 J/0.11905 mol

ΔH=32723.7295 J/mol

Convert the value in kJ

ΔH=32723.7295 J/mol×(1 kJ/1000 J)

ΔH=32.7 kJ/mol

Therefore, the molar heat of a solution is 32.7 kJ/mol.

To know more about the molar heat

https://brainly.com/question/24196482

#SPJ4

Octane full combustion has an exothermic reaction that consumes 183.55 kcal/mol.

There is a difference between burning one molecule and one mole, therefore find out how much heat (in kcal) is produced while burning one octane molecule! (I'm asking you to find it for one molecule, there are 6.0210236.021023 molecules in one mole.) The helpful data below is presented per mole. I performed the identical task for burning methanol in the video lectures, but I did it for burning a full mole. C8H18C8H18's heat of formation is -59.2 kcal/mole. O2O2: 0.0 H2OH2O: -57.8 CO2CO2: -94.1 (by definition of the scale used) A document including all of your work, including the balanced chemical equation, should be uploaded.

to know more about heat

visit:

https://brainly.com/question/24707911

#SPJ4

The dipole moment is directly proportional to the distance between the charges.

What is the dipole moment of a charge?

A dipole moment is the product of the magnitude of the charge and the distance between the centers of the positive and negative charges

What is the relationship between the dipole moment and the distance between the charges?

The larger the difference in electronegativity, the larger the dipole moment. The distance between the charge separation is also a deciding factor in the size of the dipole moment. The dipole moment is a measure of the polarity of the molecule.

How does distance affect dipole?

The dipole potential does not have spherical symmetry and decreases as 1/distance2, much faster than the Coulomb potential, which decreases as 1/distance. The dipole field decreases as 1/distance3, and dipole effects become quickly negligible as the distance increases.

Thus, the dipole moment is directly proportional to the distance between charges.

To know more about dipole moment:

https://brainly.com/question/29572034

#SPJ4