Is snow organic or inorganic?
Answer:
snow is made up of a variety of mostly organic matter, including dead or dying animals and phytoplankton, protists, fecal matter, sand, and other inorganic dust.
Explanation:
I hope I helped!!
Plz mark me brainliest it would really make my day!
Answer:
I think its organic unless we are talking about this snow storm then no
Put the following elements in order of increasing atomic number:
1. Strontium
2. Fluorine
3. Terbium
4. Zirconium
5. Iodine
6. Europium
7. Gallium
8. Aluminum
Answer:
Here is the answer ⬆️⬆️⬆️⬆️⬆️⬆️⬆️
The order of the given elements in increasing atomic number is given as F (9), Al (13), Ga (31), Sr (38), Zr (40), I(53) and Terbium (65).
What is atomic number?The atomic number of an element in periodic table is the number of electrons in its neutral atom. Elements are arranged in periodic table in an increasing order of atomic number from left to right.
An atom is composed of electrons, protons and neutrons. Protons are positively charged and electrons are negatively charged particles and they are equal in an atom. Thus, the total negative charge is neutralised by the negative charges.
The order for the given elements in periodic table in an increasing atomic number is F (9), Al (13), Ga (31), Sr (38), Zr (40), I(53) and Terbium (65).
To find more on atomic number, refer here:
https://brainly.com/question/14190064
#SPJ2
You dissolve 0.64 g of potassium chloride (KCl) in 725 ml of water.
What is the molarity of the solution?
(From the periodic table: 1 mol K = 39.10 g; 1 mol Cl = 35.453 g)
Enter the value rounded to three decimal places with no units
Will give BRAINLEST
Answer:
0.012 M
Explanation:
Step 1: Given and required data
Mass of KCl (m): 0.64 gVolume of water (V): 725 mL (We will assume it is equal to the volume of the solution)Molar mass of KCl (M): 74.553 g/molStep 2: Calculate the moles (n) of solute (KCl)
We will use the following expression.
n = m/M = 0.64 g / (74.553 g/mol) = 8.6 × 10⁻³ mol
Step 3: Calculate the molar concentration (C) of the solution
The molarity is equal to the moles of solute divided by the liters of solution.
C = 8.6 × 10⁻³ mol/0.725 L = 0.012 M
What mass of Iron (III) acetate will be produced when 1.50 grams of iron reacts in acetic acid?
Fe + H(C2H3O2) ® Fe(C2H3O2)3 + H2
Answer:
Fe + H(C2H3O2) ........
How many atoms are in phosgene
Answer:
3 atoms
Explanation:
there is one calcium and two chlorine
Use the solubility generalizations on the information page to predict if one or more precipitates will form when aqueous solutions of zinc chloride (ZnCl2) and sodium carbonate (Na2CO3) are mixed. Write the formula of any precipitate that could form.
Answer: The formula for the precipitate formed is [tex]ZnCO_3[/tex]
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The balanced chemical equation when aqueous solutions of zinc chloride and sodium carbonate are mixed:
[tex]ZnCl_2(aq)+Na_2CO_3(aq)\rightarrow ZnCO_3(s)+2NaCl(aq)[/tex]
What is the main FUNCTION of the digestive system?
What are some of the main organs of the digestive system?
What are the main sources of outdoor air pollution and how do they cause smog?
Answer:
The common sources of outdoor air pollution are emissions caused by combustion processes from motor vehicles, solid fuel burning and industry. Other pollution sources include smoke from bushfires, windblown dust, and biogenic emissions from vegetation (pollen and mold spores).
smog is produced when sunlight reacts with nitrogen oxides in the atmosphere. Nitrogen oxides come from car exhaust, coal power plants, and factory emissions. When sunlight hits these chemicals, they form airborne particles and ground-level ozone—or smog.
Titanium(IV) chloride decomposes to form titanium and chlorine, like this:
TiCl4(l) → Ti(s)+ 2Cl2(g)
At a certain temperature, a chemist finds that a reaction vessel containing a mixture of titanium(IV) chloride, titanium, and chlorine at equilibrium has the following composition:
Compound Amount
TiCl4 4.18g
Ti 1.32g
Cl2 1.08g
Required:
Calculate the value of the equilibrium constant for this reaction.
The full question is shown in the image attached to this answer
Answer:
6.2 * 10^-3
Explanation:
The reaction at equilibrium is as follows;
TiCl4(l) → Ti(s)+ 2Cl2(g)
We have to obtain the concentration of chlorine gas as follows;
[Cl2] = 1.08/70.91 g/mol × 5.2 L
[Cl2] = 0.079 M
Kc = [Cl2]^2
Kc = [ 0.079]^2
Kc = 6.2 * 10^-3
At room temperature, CsF is expected to be:______.
a. a soft solid.
b. a conducting solid.
c. a gas.
d. a brittle solid.
e. a liquid.
Answer:
d. a brittle solid.
Explanation:
Hello!
In this case, since cesium fluoride is widely known as an ionic compound due to the large electronegativity difference, it is possible to discard a. due to its crystalline structure, b. because conducting solids are metals, c. because ionic compounds are not likely to be gases and e. because even when it is soluble in water, the problem is not referring to an aqueous solution; therefore, the answer is d. a brittle solid.
Best regards!
1. Calculate how many moles of glycine are in a 130.0-g sample of glycine.2. Calculate the percent nitrogen by mass in glycine.
Answer:
[tex]n=1.732mol[/tex]
[tex]\% N=18.7\%[/tex]
Explanation:
Hello!
In this case, since the molecular formula of glycine is C₂H₅NO₂, we realize that the molar mass is 75.07 g/mol; thus, the moles in 130.0 g of glycine are:
[tex]n=130.0g*\frac{1mol}{75.07 g}\\\\ n=1.732mol[/tex]
Furthermore, we can notice 75.07 grams of glycine contains 14.01 grams of nitrogen; thus, the percent nitrogen turns out:
[tex]\% N=\frac{14.01}{75.07}*100\% \\\\\% N=18.7\%[/tex]
Best regards!
When a chemical reaction is run in aqueous solution inside a calorimeter, the temperature change of the water (and Ccal) can be used to calculate the enthalpy change for the reaction. Here, we will study the reaction of hydrochloric acid with sodium hydroxide in the calorimeter from problem 3. Equal volumes (50.0 mL) of 1.00 M sodium hydroxide and 1.00 M hydrochloric acid are mixed.
HCl+NaOH→NaCl+H2O
1. What is the total change in enthalpy (in Joules) for the reaction?
2. Where initial temperature is 21.2 °C and final temperature is 28.0 °C. Ccal is 1234.28 j
Answer:
The total change in enthalpy for the reaction is - 81533.6 J/mol
Explanation:
Given the data in the question;
Reaction;
HCl + NaOH → NaCl + H₂O
Where initial temperature is 21.2 °C and final temperature is 28.0 °C. Ccal is 1234.28 J
Moles of NaOH = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol
Moles of HCl = 50.mL × 1.00 M = 50.0 mmol = 0.0500 mol
so, 0.0500 moles of H₂O produced
Volume of solution = 50.mL + 50.mL = 100.0 mL
Mass of solution m = volume × density = 100.0mL × 1.0 g/mL = 100 g
now ,
Heat energy of Solution q= (mass × specific heat capacity × temp Δ) + Cal
we know that; The specific heat of water(H₂O) is 4.18 J/g°C.
so we substitute
q_soln = (100g × 4.18 × ( 28.0 °C - 21.2 °C) ) + 1234.28
q_soln = 2842.4 + 1234.28
q_soln = 4076.68 J
Enthalpy change for the neutralization is ΔH[tex]_{neutralization}[/tex]
ΔH[tex]_{neutralization}[/tex] = -q_soln / mole of water produced
so we substitute
ΔH[tex]_{neutralization}[/tex] = -( 4076.68 J ) / 0.0500 mol
ΔH[tex]_{neutralization}[/tex] = - 81533.6 J/mol
Therefore, the total change in enthalpy for the reaction is - 81533.6 J/mol
Prokaryotic cell division is a___________process involving onc chromosom.
A. simple
B. complex
C. unusual
Answer:
It’s is a simple
Explanation:the prokaryotic cell involves a simple process which intern involves one chromosom
does warm air or cool air hold more humidity.
Answer:
warm
Explanation:
How many moles of potassium sulfate are present in a sample that weighs 45.8g?
I do not understand how to solve this please help
Answer:
0.263 mol
Explanation:
K2SO4 - potassium sulfate
Molar mass (K2SO4) = 2*39.0983 + 32.065 + 4*15.9994 =
= 174.2592≈174.26 g/mol
45.8 g * 1 mol/174.26 g = 0.263 mol
How many CaF are in a 1.7x10^25 please I need help fast!!
28 mol CaF
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Avogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
[Given] 1.7 × 10²⁵ molecules CaF
[Solve] moles CaF
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[DA] Set up: [tex]\displaystyle 1.7 \cdot 10^{25} \ molecules \ CaF(\frac{1 \ mol \ CaF}{6.022 \cdot 10^{23} \ molecules \ CaF})[/tex][DA] Multiply/Divide [Cancel out units]: [tex]\displaystyle 28.2298 \ moles \ CaF[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
28.2298 mol CaF ≈ 28 mol CaF
Does ionic or covalent form solid crystals?
Answer:
I hope it help
your welcome
What type of reaction
the following chemical reaction?
2C2H4O2 → C4H6O3 + H2O
Both amines and amides are derivatives of
acetic acid
sodium hydroxide
ammonia
sodium chloride
Answer:
Ammonia
Explanation:
Both amines and amides are structurally similar to ammonia, the difference is the introduction of a carbon into the structure.
Based on the following equation, how many moles of hydrochloric acid (HCl)are needed to react with 0.44 moles of potassium
permanganate (KMnO4)?
2KMnO4 + 8HCI - 3Cl2 + 2MnO2 + 4H2O + 2KCI
Answer:
1.76 moles of HCl.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
2KMnO₄ + 8HCl —> 3Cl₂ + 2MnO₂ + 4H₂O + 2KCl
From the balanced equation above,
2 moles of KMnO₄ reacted with 8 moles of HCl.
Finally, we shall determine the number of mole of HCl needed to react with 0.44 moles of KMnO₄. This can be obtained as follow:
From the balanced equation above,
2 moles of KMnO₄ reacted with 8 moles of HCl.
Therefore, 0.44 moles of KMnO₄ will react with = (0.44 × 8)/2 = 1.76 moles of HCl.
Thus, 1.76 moles of HCl is needed for the reaction.
the Rockies and the Appalachians are two major mountain ranges in the United States. Which type of plate movement caused these mountain ranges to form
Answer:
Convergent
Explanation:
I don't know whether this is one of your answers but It is convergent because convergent boundaries are when two plates collide against each other which can create mountains and volcanos.
Iron-59 which is used to diagnose anaemia has a half life of 45days, what fraction of it is left in 90 days
Answer:
0.25 of the original
Explanation:
(0.5)^(90/45)
The fraction of iron-59 after 90 days is 0.25.
Iron-59 decays following first-order kinetics. Given the half-life ([tex]t_{1/2}[/tex]) of 45 days, we can calculate the rate constant (k) using the following expression.
[tex]k = \frac{ln2}{t_{1/2}} =\frac{ln2}{45day} = 0.015 d^{-1}[/tex]
For first-order kinetics, we can find the fraction of Fe ([Fe]/[Fe]₀) after and an elapsed time (t) of 90 days, using the following equation.
[tex]\frac{[Fe]}{[Fe]_0} =e^{-k \times t } = e^{-0.015 d^{-1} \times 90 d } \approx 0,25[/tex]
The fraction of iron-59 after 90 days is 0.25.
You can learn more about kinetics here:
https://brainly.com/question/2284525
who is the father of phycis
Galileo Galilei
hope it helps you
Answer:
Galileo Galilei is the father of Physics
I hope it helps ❤❤
write down four fuctions of water learned in life sciences class
Answer:
See explanation
Explanation:
Water is a polar solvent and is also called a universal solvent because of its ability to dissolve several substances especially in the body.
The functions of water learned in the life sciences class include;
1. Water is the medium for biochemical reactions
2. Most substances in the body are transported from place to place by water.
3. Water acts a solvent for many biologically important substances in the body.
4. Water is necessary in helping animals to regulate their body temperature.
I need help plz quick on my homework its due at 11 i will give branliest to correct answer its on limiting reagents.
Answer:4.2 6.4 6.7 9.5 5.5 3.8
Explanation:
In a technique used for surface analysis called auger electron spectroscopy (AES), electrons are accelerated toward a metal surface. These electrons cause the emissions of secondary electrons (called auger electrons) from the metal surface. The kinetic energy of the auger electrons depends on the composition of the surface. The presence of oxygen atoms on the surface results in auger electrons with a kinetic energy of approximately 520 eV .
Required:
What is the de Broglie wavelength of one of these electrons?
Answer:
the de Broglie wavelength of one of the electrons is 5.3787 × 10⁻¹¹ m
Explanation:
Given the data in the question;
we know that; ( electron volt ) 1 eV = 1.602 × 10⁻¹⁹ J
so given that Kinetic Energy KE = 520 eV
KE = 520 × 1.602 × 10⁻¹⁹ = 8.3304 × 10⁻¹⁷ J
we know that;
Kinetic Energy = 1/2 × mv²
where m is the electron mass
and mass of electron is 9.109 × 10⁻³¹ kilograms
so
8.3304 × 10⁻¹⁷ = 1/2 × 9.109 × 10⁻¹⁷× v²
v = √[(8.3304 × 10⁻¹⁷) / (1/2 × 9.109 × 10⁻³¹)]
v = 1.3524 × 10⁷ m/s
speed of the electron v = 1.3524 × 10⁷ m/s
now, de Broglie equation;
wavelength λ = h / mv
where h is Planck constant ( 6.626 × 10⁻³⁴ m² kg / s )
so we substitute
wavelength λ = 6.626 × 10⁻³⁴ / ( 9.109 × 10⁻³¹ × 1.3524 × 10⁷)
wavelength λ = 5.3787 × 10⁻¹¹ m
Therefore, the de Broglie wavelength of one of the electrons is 5.3787 × 10⁻¹¹ m
Indicate whether each structure is aromatic, nonaromatic, or antiaromatic. Assume planarity. Compound A is a 5 membered heterocyclic ring containing two pi bonds. On one of the pi bonds is a sulfur with one lone pair and a positive charge. There is an N H group between the two pi bonds with one lone pair. Compound B is a 6 membered ring with three pi bonds. One of the ring atoms is a protonated oxygen with one lone pair. Compound C is an 8 membered ring with a double bond between carbons 2 and 3, between carbons 5 and 6 and between carbons 7 and 8. There is a positive charge on carbon 4 and a negative charge and lone pair on carbon 1. Compound D is a 7 membered ring with three pi bonds. In between two alkenes is a boron attached to a hydrogen. Comppound E is a 7 membered ring with three pi bonds. In between two alkenes is a negative charge with a lone pair.
Answer:
this some next level stuff homie
Explanation:
imma just guess 7?
The thing being described is shaped like a ring with five parts. Inside the ring, there are two special types of bonds. This has a sulfur that is positively charged and has one unshared pair, also it has an NH group with one unshared pair.
What is the structureCompound B is a substance that is made up of two or more different elements or molecules.
The thing being described has a ring with six members and three pi bonds. It has an oxygen atom with an extra proton and one extra electron. This substance is not aromatic.
Read more about aromatic here:
https://brainly.com/question/30624539
#SPJ6
By definition, a(n) _______acid is any species that can donate a proton. Ammonia has a proton bonded to nitrogen, so ammonia can be an base (although a very weak one). A(n)___________ base is a proton acceptor, that is, it must have a pair of electrons to share with a proton. In theory, any atom with an unshared electron pair can be a________ pair so ammonia is a_______ proton; instead, it acts as a base and pulls a proton from water to a small extent. base The nitrogen in ammonia has an unshared electron In water, ammonia is too weak an ______-to give up its
Answer:
A Brønsted-Lowry acid.
A Brønsted-Lowry base.
Ammonia is an acceptor of proton.
Explanation:
A Brønsted-Lowry acid is any atom that can donate a proton (H +) to another atom or molecule whereas Brønsted-Lowry base is any species that can accept a proton from another atom or molecule or in other words, a Brønsted-Lowry acid is a proton donor, while on the other hand, a Brønsted-Lowry base is a proton acceptor. The ammonia molecule accepts the hydrogen ion is considered as the Brønsted-Lowry base.
Empirical formula for S3O9
Answer:
* The empirical formula of a compound shows the ratio of elements present in a compound
* The molecular formula of a compound shows how many atoms of each element are present in a molecule of a compound.
Example: the compound butene has a molecular formula of C4H8. The empirical formula
of butene is CH2 because there is a 1:2 ratio of carbon atoms to hydrogen atoms.
1
What is the name of Ba3(PO4)2?
O a. Tribarium Diphosphate
tof
O b. Triboron Diphosphate
O c. Boron Phosphate
O d. Barium Phosphate
Answer:
The answer is barium phosphate