Imagine that you are sitting in a chamber with your back to one wall. An electron beam, moving horizontally from the front wall towards the back wall, is deflected by a strong magnetic field to your right side. What is the direction of the magnetic field? Name the rule used to find out the direction of magnetic field in this situation

Answer:

82.76m

Explanation:

In order to find the distance of the steel ring to the ground, when its temperature has raised by 1°C, you first calculate the radius of the steel tube before its temperature increases.

You use the formula for the circumference of the steel ring:

[tex]C=2\pi r[/tex]    (1)

C: circumference of the ring = 40000 km = 4*10^7m (you assume the circumference is the length of the steel tube)

you solve for r in the equation (1):

[tex]r=\frac{C}{2\pi}=\frac{4*10^7m}{2\pi}=6,366,197.724m[/tex]

Next, you use the following formula to calculate the change in the length of the tube, when its temperature increases by 1°C:

[tex]L=Lo[1+\alpha \Delta T][/tex]         (2)

L: final length of the tube = ?

Lo: initial length of the tube = 4*10^7m

ΔT = change in the temperature of the steel tube = 1°C

α: thermal coefficient expansion of steel = 13*10^-6 /°C

You replace the values of the parameters in the equation (2):

[tex]L=(4*10^7m)(1+(13*10^{-6}/ \°C)(1\°C))=40,000,520m[/tex]

With the new length of the tube, you can calculate the radius of a ring formed with the tube. You again solve the equation (1) for r:

[tex]r'=\frac{C}{2\pi}=\frac{40,000,520m}{2\pi}=6,366,280.484m[/tex]

Finally, you compare both r and r' radius:

r' - r = 6,366,280.484m - 6,366,197.724m = 82.76m

Hence, the distance to the ring from the ground is 82.76m

Explanation:

Un tubo de acero de 40000 kilómetros forma un anillo que se ajusta bien a la circunferencia de la tierra. Imagine que las personas junto a él respiran para calentarlo con su aliento y aumentar su temperatura 1 grado Celsius. El tubo se hace más largo. También ya no queda ajustado. ¿A qué distancia sube sobre sobre el nivel del suelo? (solo tomar en cuenta la expansión radial al centro de la tierra, y aplicar la fórmula geométrica que relaciona la circunferencia C con el radio r: C= 2πr).

Answer:

Explanation:

Given the following :

Speed (V) = speed of 2.30×10^7 m/s

Acceleration (a) = 1.70×10^13 m/s^2

Using the right hand rule provided by  Lorentz law:

B = F / qvSinΘ

Where B = magnitude of the magnetic field

v = speed of the particle

Θ = 90° (perpendicular to the field)

q = charge of the particle

SinΘ = sin90°  = 1

Note F = ma

Therefore,

B = ma / qvSinΘ

Mass of proton = 1.67 × 10^-27

Charge = 1.6 × 10^-19 C

B = [(1.67 × 10^-27) × (1.70 × 10^13)] / (1.6 × 10^-19) × (2.30 × 10^7) × 1

B = 2.839 × 10^-14 / 3.68 × 10^-12

B = 0.7715 × 10^-2

B = 7.72 × 10^-3 T

2) Magnetic field will be in the negative y direction according to the right hand thumb rule.

Since Velocity is in the positive z- direction, acceleration in the positive x - direction, then magnetic field must be in the negative y-direction.

Answer:1.81

(a) Explanation:the turn ratio= input voltage÷output voltage.

400÷220=1.81.

Don't know how to solve b part...

Answer:

110 mL

Explanation:

Ideal gas law:

PV = nRT

Assuming the container isn't rigid, and the pressure is constant, then:

V/T = V/T

Plug in values (remember to use absolute temperature).

V / 293 K = 150 mL / 393 K

V = 110 mL

Answer:

Kinetic Energy

Explanation:

Kinetic energy is energy due to motion.

Answer:

D

Explanation:

Elastic energy is energy stored in a object when there is a strain or compression on the object.

Nuclear energy is the energy found in the nucleus of an atom.

Potential energy is energy that an object stores because of its position to other objects.

Kinetic energy is the energy that an object has due to motion.

The child is riding her bicycle, therefore the child is in motion. So, the correct answer must be D. Kinetic energy

As waves travel into the denser medium, they slow down and wavelength decreases.

Explanation:

The denser the medium the slower the waves (speed of light) travels.

◦•●◉✿When the body approaches the speed of light, the body's length appears to contract in the direction of travel, and its mass appears to increase from the point of view of a stationary observer. Only photons move to light velocity. They don´t have length.✿◉●•◦

Answer:

The answer is Revising

Answer:

D

Explanation:

Revising

Answer:

1. it helps to change the direction.

2. it helps us to walk on ground.

3. it helps the vechils to break while moving.

4. helps in changing one form of enegry to another form. eg when we rub our hands we feel heat energy.

5. it opposites the force.

6. it helps us to change shape of objects.eg we roll the dough to make it roti.

7. it changes the state of body from rest motion.eg when we push any obj from inclined plane it moves.

i all know is just 7..

Answer:

World Wrestling Entertainment, Inc., d/b/a WWE, is an American integrated media and entertainment company that is primarily known for professional wrestling. WWE has also branched out into other fields, including movies, football, and various other business ventures.

Answer:

This means WORLD WRESTLING ENTERTAINMENT.

Explanation:

This is an american integrated media and entertainment company that is primarily known for PROFESSIONAL WRESTLING.

Answer:

a) El caudal de salida del chorro es [tex]1.213\times 10^{-3}\,\frac{m^{3}}{s}[/tex].

Explanation:

a) Asúmase que el tanque se encuentra a presión atmósferica y que la sima del tanque tiene una altura de 0 metros. La rapidez de salida del chorro del depósito se determined a partir del Principio de Bernoulli, cuya línea de corriente entre la cima y la sima del tanque queda descrita por la siguiente ecuación:

[tex]\Delta z = \frac{v_{out}^{2}}{2\cdot g}[/tex]

Donde:

[tex]\Delta z[/tex] - Diferencia de altura, medida en metros.

[tex]g[/tex] - Constante gravitacional, medida en metros por segundo al cuadrado.

[tex]v_{out}[/tex] - Rapidez de salida del chorro, medida en metros por segundo.

Se despeja la rapidez de salida del chorro:

[tex]v_{out} = \sqrt{2\cdot g \cdot \Delta z}[/tex]

Si [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] y [tex]\Delta z = 0.3\,m[/tex], entonces la rapidez de salida del chorro es:

[tex]v_{out} = \sqrt{2\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (0.3\,m)}[/tex]

[tex]v_{out} \approx 2.426\,\frac{m}{s}[/tex]

Ahora, la cantidad de líquido que sale del depósito por unidad de tiempo se obtiene al multiplicar la rapidez de salida del chorro por el área transversal del orificio. Esto es:

[tex]\dot V_{out} = v_{out}\cdot A_{t}[/tex]

Donde:

[tex]v_{out}[/tex] - Rapidez de salida del chorro, medida en metros por segundo.

[tex]A_{t}[/tex] - Área transversal del orificio, medido en metros cuadrados.

[tex]\dot V_{out}[/tex] - Caudal de salida del chorro, medido en metros cúbicos por segundo.

Dado que [tex]v_{out} = 2.426\,\frac{m}{s}[/tex] y [tex]A_{t} = 5\,cm^{2}[/tex], el caudal de salida del chorro es:

[tex]\dot V_{out} = \left(2.426\,\frac{m}{s} \right)\cdot (5\,cm^{2})\cdot \left(\frac{1}{10000}\,\frac{m^{2}}{cm^{2}} \right)[/tex]

[tex]\dot V_{out} = 1.213\times 10^{-3}\,\frac{m^{3}}{s}[/tex]

El caudal de salida del chorro es [tex]1.213\times 10^{-3}\,\frac{m^{3}}{s}[/tex].

Answer:

E≅1.2×10^7 N/C

Explanation:

First off I'd like to say that I'm taking "net electric field" to mean that they don't want this answer to be put into vector component form and instead want magnitudes. Sometimes the wording of these questions throws me off, so sorry ahead of time if that's what they want from you!

Edit: I ended up adding it anyways ;P

Since we are observing the net electric field acting at q1, we need to use the formula:  [tex]E=k\frac{q}{r^{2} }[/tex]

And since we are observing the effects of multiple charges at once...

E=ΣE, which just means wee need to add all the observed electric fields together:

ΣE= [tex]k\frac{q2}{r^{2} } +k\frac{q3}{r^{2} }[/tex]

Since we are observing [static] electric fields here, we don't actually need q1's charge. (Though if you wanted to find the net force you would.) Now, before we start plugging values in, let's acknowledge what we know. We know that:

These are actually really nice to have, because now we can simplify our expression to:

[tex]E=k\frac{2q}{r^{2} }[/tex]

Now let's plug in our values and get an answer out.

E= 2(8.99×10^9)(4×10^-5)/(0.24)

Plugging all that in, I get:

E≅1.2×10^7 N/C

If you end up needing the net force, F=(q1)(E). That is, you just multiply the electric field by the value of q1. And again, if your teacher wants the answer in vector component form, then the answer will look different.

Let me know what doesn't make sense, or if I got something wrong. Good luck with AP Phy.!

Edit: I put the component form for my answer in the attachment. I also noticed a small calculator related error in my original answer. I updated that to match the new one.

Answer:

amplitude

Explanation:

Amplitude is the characteristic of waves which caused the bridge to collapse.   Amplitude of a wave is the maximum amount of displacement of a particle occurs in the medium from its rest position. When the frequency of a wave reaches the natural frequency of the bridge, the oscillation of the bridge produce an amplitude where it causing the destruction of the bridge which is called Resonance. So we can say that amplitude is the characteristic of waves which is responsible for the collapse of the bridge.

Answer: C.interference, because constructive interference occurred when the wind frequency matched the natural frequency of the bridge

Explanation:

Answer:

option d is answer because pd is measured in volt.

Answer:

a. Convert  120 × 10⁸ g to i mg = 1.2 × 10¹³ mg ii. to g = 1.2 × 10⁷ kg

b. Convert 200000 × 10³ m to i. micrometers = 0.2 × 10³ μm  ii. to cm = 2 × 10⁶ cm iii. to km = 2 × 10⁵ km

Explanation:

a. i. To convert the mass = 120 × 10⁸ g to mg, We know that 1000 mg = 10³ mg = 1 g, Since we are converting to mg, 120 × 10⁸ g = 120 × 10⁸ × 1g = 120 × 10⁸ × 10³ mg = 120 × 10¹¹ mg = 1.2 × 10² × 10¹¹ mg = 1.2 × 10¹³ mg

ii. To convert the mass = 120 × 10⁸ g to kg, We know that 1000 g = 10³ g = 1 kg, 1 g = 10⁻³ kg. Since we are converting to kg, 120 × 10⁸ g = 120 × 10⁸ × 1g = 120 × 10⁸ × 10⁻³ kg = 120 × 10⁵ kg = 1.2 × 10² × 10⁵ kg = 1.2 × 10⁷ kg

b. i.To convert the length = 200000 × 10³ m to micrometers, We know that 1/1000000 μm = 10⁻⁶ mg = 1 m, Since we are converting to micrometers, μm, 200000 × 10³ m = 200000 × 10³ × 1 m = 200000 × 10³ ×  1/1000000 μm = 200000/1000000 × 10³ μm = 0.2 × 10³ μm

ii. To convert the length = 200000 × 10³ m to cm, We know that 100 cm = 10² cm = 1 m, 1 m = 10⁻² cm = 1/100 cm. Since we are converting to cm, 200000 × 10³ m = 200000 × 10³ × 1 m = 200000 × 10³ × 1/100 cm = 200000/100 × 10³ cm = 2000 × 10³ cm  = 2 × 10³ × 10³ cm = 2 × 10⁶ cm

iii. To convert the length = 200000 × 10³ m to km, We know that 1000 m = 10³ m = 1 km, 1 m = 10⁻³ km = 1/1000 km Since we are converting to km, 200000 × 10³ m = 200000 × 10³ × 1 m = 200000 × 10³ ×  1/1000 km = 200000/1000 × 10³ km = 200 × 10³ km = 2 × 10² × 10³ km = 2 × 10⁵ km

Answer:

503°C

Explanation:

According to the given situation, the computation of the final temperature is shown below:

In this question we use the law of ideal gas i.e

pV = nRT

i.e

[tex]\frac{p_1V_1}{T_1} = \frac{p_2V_2}{T_2}[/tex]

Therefore

[tex]T_2 = T_1 (\frac{p_2}{p_1}) (\frac{V_2}{V_1})[/tex]

[tex]= 300\ k (\frac{2.72 \times 10^{6} Pa + 1.01 \times 10^{5} Pa}{1.01 \times 10^{5} Pa})(\frac{46.2 cm^3}{499 cm^3})[/tex]

= 776 k

= (776  - 273)° C

= 503°C

Therefore the final temperature is 503°C

We simply applied the above formulas so that the final temperature could arrive

Answer:

d. Both kinetic and sliding friction

Explanation:

Kinetic friction, commonly known as sliding friction, happens when a body with its surfaces in contact is in relative motion with another. It's the frictional force slowing it down, and finally stopping a moving body. One can describe sliding friction as the resistance any two objects create while sliding against each other. It is often documented as the force required to hold a surface moving along another surface. It is determined by two variables- one is material of the object and another is its weight.

Answer:

MARK me brainliest please and follow my page

Explanation:

All you have to do to get the average speed is to calculate the total distance covered and divide it by the total time taken

= 16/18 = 0.88m/s

Average speed = (distance covered) / (time to cover the distance)

For the full 18 seconds described by the graph . . .

Average speed = (16 meters) / (18 seconds)

Average speed = (16 / 18) m/s

Average speed =  0.89 m/s

Answer:

C-0.55 m/s to the right

Explanation:

edg

Answer:

0.55 to the right

Explanation:

Explanation:

Given the conditions A,B and C when the pendulum is released, at point A the initial velocity of the pendulum is zero(0), the potential energy stored is maximum(P.E= max),

the conditions can be summarized bellow

point A

initial velocity= 0

final velocity=0

P.E= Max

K.E= 0

point B

initial velocity= maximum

final velocity=maximum

P.E=K.E

point C

initial velocity= min

final velocity=min

P.E= 0

K.E= max

Answer:

The black lines represent the energy absorbed by the electrons.

Explanation:

Atoms emit lights when they are excited. These lights are of particular wavelengths that match with different colors. A series of colored lines appear along with spaces in the middle of the two colors. The middle of the colors is filled with dark spaces. Each spectral line of an element represents a specific characteristic of the element. These colored lines appearing in the form of series are termed to be the atomic spectrum of the element. Identification of the elements is done through the line of the spectrum they possess.

Answer:

(B) The black lines represent the energy absorbed by the electrons.

Explanation:

Answer: Because of the fine bore of the tube.

Explanation:

Temperature is the degree of hotness and coldness. And thermometer is the instrument use to measure temperature.

The two most common types of themometric fluids for thermometer are alcohol and mercury.

What makes a clinical thermometer suitable for measuring small changes in body temperature is because of the fine bore of the tube which makes it possible for small temperature changes to cause large changes in the length of mercury columns, making the thermometer very sensitive to temperature changes.

The most prominent feature of the thermometer is the kink or constriction of bore near the bulb.

Answer:

xxx

Explanation:

Answer:

A.

Explanation:

it's needed top release energy due to the breaking of chemical bonds.

Answer:

A: the ice releases energy which causes chemical bonds to break, changing the water to ice.

Explanation:

Answer:

The magnitude of the average force on the wall during the collision is 6 N.

Explanation:

Given;

mass of snowball, m = 120 g = 0.12 kg

velocity of the snowball, v = 7.5 m/s

duration of the collision between the snowball and the wall, t = 0.15 s

Magnitude of the average force can be calculated by applying Newton's second law of motion;

F = ma

where;

a is acceleration = v / t

a = 7.5 / 0.15

a = 50 m/s²

F = ma

F = 0.12 x 50

F = 6 N

Therefore, the magnitude of the average force on the wall during the collision is 6 N.

Answer: a. How the mass of an extended object is distributed about a rotation axis

Explanation: Moment of inertia is defined as the measure of the rotational inertia of a solid object, it is a quantity that defines the torque needed to reach a desired angular acceleration around a given rotation axis, and it depends mainly on the mass distribution of the object, so the correct answer is: "how the mass of an extended object is distributed about a rotation axis"

Answer:

Time, t = 3.2 ms

Explanation:

It is given that,

Mass of basketball, m = 0.622 kg

Initial velocity, u = 4.23 m/s

Final velocity, v = 3.85 m/s

Average force acting on the ball, F = 72.9 N

We need to find the time of contact of the ball with the floor. Let t is the time of contact. So,

[tex]F=ma\\\\F=\dfrac{m(v-u)}{t}\\\\t=\dfrac{m(v-u)}{F}\\\\t=\dfrac{0.622\times (3.85-4.23)}{72.9}\\\\t=0.0032\ s\\\\\text{or}\\\\t=3.2\ ms[/tex]

So, the ball is in contact with the floor for 3.2 ms.

Answer:

4 km/hr

Explanation:

The computation of the actual velocity is shown below:

Because the path of its paddles is opposed to the current direction, the real velocity can be determined by deducting the current velocity to its velocity while paddling

So, the actual velocity is

= Upstream - downstream

= 19 km/hr - 15 km/hr

= 4 km/hr

As we can see it is in positive, so it is an upstream direction  

Answer:

since the direction of his paddles is opposite of the the direction of the current, so the actual velocity can be calculated by subtracting the velocity of current to to his velocity when paddling

v = 19 - 15

v = 4 since the answer is positive, then the direction is upstream

Explanation:

Answer:

E = 85170 J (/ 85.2 kJ)

Explanation:

Take the latent heat of fusion of water be 334J / g.

From the equation E = ml,

E = energy required (unknown),

mass m = 255g,

latent heat of fusion l = 334J / g,

E = 255 x 334

E = 85170 J (/ 85.2 kJ)

Answer:

Liquids

Explanation:

Liquids take up the shape of the container it is poured into but will never change its volume.