Answers
Answer:
A. Infiltration
B. Ground water discharge
C. Water storage in the ocean
D. Evaporation
E. Condensation
F. Precipitation
G. Runoff
im not sure about A-C
hope this helps
have a good day :)
Explanation:
Related Questions
Calculate the molar mass of Ca3(PO4)2
934.32 g Ca3(PO4)2 =______
moles Ca3(PO4)2
Answers
Answer:
Molar mass of Ca₃(PO₄)₂ = 310.18 g/mol934.32 g Ca₃(PO₄)₂ = 3.01 moles Ca₃(PO₄)₂Explanation:
The molar mass (MM) of Ca₃(PO₄)₂ can be calculated as follows:
MM of Ca₃(PO₄)₂ = (MM of Ca)*3 + [(MM of P) +(MM of O)*4]*2MM of Ca₃(PO₄)₂ = 310.18 g/molNow we can convert 934.32 g of Ca₃(PO₄)₂ into moles:
934.32 g ÷ 310.18 g/mol = 3.01 molesHELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Which of the following statements is true?
Some plants cannot reproduce.
Pollen contains male sperm cells.
Mitosis results in two non-identical cells.
Flowering plants reproduce using spores.
Answers
Answer:
errccvbnnbb
Explanation:
jjuxxxsyy
Answer:
i think it the third one
Explanation:
sorry if im wrong are u in biology?
How many total ions are there in 5.00 moles of cobalt (II) bromide?
Answers
How many ions are in 1
mole of potassium sulfate?
Answers
Answer:
We will need two potassium ions to balance the charge on the sulfate ion, so the proper chemical formula is K 2SO 4.
Explanation:
hope this helps
Ionic bonds result from elements ____.
A. that share electrons
B. with high electronegativity differences
C. That form polar bonds
D. That are only nonmetals
Answers
So I would think A
Questions
Determine the primary and secondary valencies of the following complexes and calculate their spin only magnetic
moment.
iii. [Cu(OH2)6]504
i. K[TI(CN).]
ii. [V(NH3)4Br2]
iv. K3 [Cr(CN)6]
Answers
Answer:
yes
Explanation:
yes
A “happy” atom is one that has a _________ valence orbital. octet rule
Answers
Answer:
Hello There!!
Explanation:
I believe the answer is 8.
hope this helps,have a great day!!
~Pinky~
what volume of h2 can be produced at stp from 2 mol cah2 and excess water if the reaction goes 100% to completion?
Answers
Answer:
89.6 L of H₂ will be produced at STP from 2 moles of CaH₂ and excess water if the reaction goes to 100% completion.
Explanation:
The balanced chemical equation of the reaction between calcium hydride, CaH₂ and excess water to produce calcium hydroxide and hydrogen gas is given below:
CaH₂ (s) + 2H₂O (l) ----> Ca(OH)₂ (aq) + 2H₂ (g)
From the equation of the chemical reaction above, 1 mole of calcium hydride reacts with 2 moles of water to produce 2 moles of hydrogen gas.
Then, 2 moles calcium hydride will react with excess water to produce 2 × 2 -moles of hydrogen gas = 4 moles of hydrogen gas.
One mas a gas at STP has a volume of 22.4 L
4 moles of hydrogen gas will have a volume of 4 × 22.4 L = 89.6 L
Therefore, 89.6 L of H₂ will be produced at STP from 2 moles of CaH₂ and excess water if the reaction goes to 100% completion.
Select ALL of the abiotic factors
lesson 5.01
Question 1 options:
air
light
fungi
soil
salinity
Answers
Answer:
I think it should be
salinity and
light
Hey duckers
Pp poopoo everyday
Answers
Answer:
So when a cat puts up its middle finger its usually trying to scare you off.
Explanation:
it's gonna kill you.
what is solubility? .
Answers
What happens in radioactive decay?
O A. An electron is lost to form a negatively charged particle.
O B. An unstable nucleus breaks down into smaller parts.
O C. Two smaller nuclei are joined to form one larger nucleus.
O D. A large nucleus breaks apart to form smaller nuclei.
SHIRME
Answers
A radioactive atom will spontaneously release radiation in the shape of energy rather than particles in order to transition into a more steady state.
Why is something radioactive?Radioactivity, as its name suggests, seems to be the act of generating radiation without any external cause. This is carried out by an unstable atomic nucleus that "wants" to abandon certain power in order to change to a more stable form.
Are people radioactive at all?Absolutely, since humans consume radioactive materials from the environment through food, drink, and air, our bodies are inherently radioactive. Our bodies take these substances in and store them in our bones, tissues, and organs. We also breathe them in and consume them.
To know more about radioactive visit:
https://brainly.com/question/1770619
#SPJ1
how many cats are in the word
Answers
Answer: more than 70,00 and most of that population is living on the streets
What is the lowest whole number ratio between the aluminum ion and carbonate ion in the compound, aluminum carbonate?
A. 2 :1
B. 1: 1
C. 3 : 2
D. 1 : 2
E. 2 : 3
Answers
Answer:
E. 2 : 3
Explanation:
Aluminium carbonate is a neutral compound made by aluminium ion, Al³⁺ and carbonate ion, CO₃²⁻. As is neutral, the formula must be:
Al₂(CO₃)₃.
2 Al₃⁺ = 6 positives charges
3 CO₃²⁻ = 6 negative charges
Thus, the simplest whole number ratio between Al³⁺ and CO₃²⁻ must be:
2:3
And right answer is:
E. 2 : 3A solution is prepared by dissolving solid ammonium nitrate, NH4NO3, in water. The initial temperature of the water was 25oC, but after the solid had dissolved, the temperature had fallen to 20oC. What conclusion may be made about delta H and delta S
Answers
Answer:
ΔH is positive, ΔS is positive
Explanation:
The enthalpy of reaction (ΔH) is positive in an endothermic reaction. An endothermic reaction leads to a decrease in temperature. Hence the fact that the temperature was decreased from 25oC to 20oC shows that the reaction is endothermic therefore ΔH is positive.
Also, the equation of the dissolution is;
NH4NO3(s) -----> NH4^+(aq) + NO3^-(aq)
This means that the number of particles in solution were increased. The entropy increases with increase in number of particles hence ΔS is positive.
Once the concentration of the common ion is increased______.
a. the solubility of the ionic solid increases.
b. the solubility of the ionic solid decreases.
c. the solubility of the common ion increases.
d. the solubility of the common ion decreases.
Answers
Answer:
B
Explanation:
When a lead acid car battery is recharged by the alternator, it acts essentially as an electrolytic cell in which solid lead(II) sulfate PbSO4 is reduced to lead at the cathode and oxidized to solid lead(II) oxide PbO at the anode.Suppose a current of 62.0 is fed into a car battery for 23.0 seconds. Calculate the mass of lead deposited on the cathode of the battery. Round your answer to 3 significant digits. Also, be sure your answer contains a unit symbol.
Answers
Answer: The mass of lead deposited on the cathode of the battery is 1.523 g.
Explanation:
Given: Current = 62.0 A
Time = 23.0 sec
Formula used to calculate charge is as follows.
[tex]Q = I \times t[/tex]
where,
Q = charge
I = current
t = time
Substitute the values into above formula as follows.
[tex]Q = I \times t\\= 62.0 A \times 23.0 sec\\= 1426 C[/tex]
It is known that 1 mole of a substance tends to deposit a charge of 96500 C. Therefore, number of moles obtained by 1426 C of charge is as follows.
[tex]Moles = \frac{1426 C}{96500 C/mol}\\= 0.0147 mol[/tex]
The oxidation state of Pb in [tex]PbSO_{4}[/tex] is 2. So, moles deposited by Pb is as follows.
[tex]Moles of Pb = \frac{0.0147}{2}\\= 0.00735 mol[/tex]
It is known that molar mass of lead (Pb) is 207.2 g/mol. Now, mass of lead is calculated as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\ 0.00735 = \frac{mass}{207.2 g/mol}\\mass = 1.523 g[/tex]
Thus, we can conclude that the mass of lead deposited on the cathode of the battery is 1.523 g.
12 points
Methyl methacrylate has a molar mass of 100 g/mole When a sample of methyl methacrylate weighing 3.14 g was completely combusted, the only products formed
were 6.91 g of CO2 and 2.26 g of water. What is methyl methacrylate's molecular formula?
O A C5H8O2
OBC6H120
OCC7H16
OD. None of the above
O E C4H403
Answers
Answer:
C₅H₈O₂
Explanation:
methyl methacrylate = 100 amu
6.91g CO₂ = 0.157 moles
2.26g H₂O = 0.125 moles
0.157 ÷ 0.125 = 1.256
{(CO₂)₁.₂₅₆ + (H₂O)₁} × 4 = (CO₂)₅ + (H₂O)₄
C₅H₈O?
C₅ = 60.05 amu H₈ = 8.064 amu
60.05 + 8.064 = 68.114 amu
100 amu - 68.114 amu = 31.886 amu
O = 16 amu
O = 2
The molecular formula of methyl methacrylate is C₅H₈O₂. The correct option is A, C₅H₈O₂.
What is methyl methacrylate?
Methyl methacrylate (MMA) is a colorless liquid monomer with a distinctive fruity odor. It is an organic compound that belongs to the family of acrylic esters.
We have to determine the empirical formula of methyl methacrylate first and then multiply it by the integer n to determine the molecular formula. Empirical formula:
CO₂ and H₂O are the combustion products of methyl methacrylate.
C₅H₈O₂ + (9n / 2)
O₂ → 5CO₂ + (n)H₂O
There are 5 C atoms and (8 + 2n), H atoms in the left and 5 C atoms, and n H atoms in the right.
5C = 5C, and 8 + 2n = nH.
n = 6
Molecular formula calculation is dividing the molecular weight by the empirical formula weight to determine the multiplication factor.
C₅HₙO₂ (empirical formula) has a weight of:
(5 x 12.011) + (8 x 1.008) + (2 x 15.999) = 100.12 g/mol
The actual molecular weight of methyl methacrylate is 100 g/mol.
Therefore, the molecular formula is (C₅H₈O₂) x 1, which is C₅H₈O₂, option A.
To know more about the molecular formula, Click here:
brainly.com/question/29435366
#SPJ2
What happens when an electron moves to a higher energy level?
A. It releases energy of a specific frequency
B. It gains energy in a quantized amount.
C. It loses energy in the form of light.
D. It absorbs photons of many energies
ANSWER: B. It gains energy in a quantized amount.
Answers
Answer:
B. It gains energy in a quantized amount.
what are the products of this reaction
Cu+AgNO3
Answers
Answer:
1 Cu + AgNO3 → Ag + CuNO3
2 Cu + Ag(NO3)2 → Ag + CuNO3
Explanation:
plzzz mark me brainliest
Astronauts must be protected from extreme heat while
reentering the Earth's atmosphere. Scientists can use the
engineering design process to help make reentry safer.
You have defined the problem as a need for heat shields to be stronger. What
should be your next step in using the engineering design process to solve the
problem?
O A. Communicate your solution to your team members.
O B. Update your initial design for the heat shield.
O C. Identify the criteria and constraints of the project.
O D. Build a prototype of a possible new type of heat shield.
Answers
The next engineering step to be taken is to update your initial design for the heat shield.
What is a heat sheild?The term heat sheild refers to a device that can be used to shield an from astronaut extreme heat especially as they re-enter the earth's atmosphere.
After you have identified the problem, the next engineering step to be taken is to update your initial design for the heat shield.
Learn more about heat sheild:https://brainly.com/question/21504467?
#SPJ2
describes the oil-free paint manufacturing process
Answers
Answer:
which account for over 60% of total resin use in the USA. The main pigment was titanium dioxide and the major solvents aliphatic hydrocarbons
Explanation:
identify two conjugate base for each compound HCN and HBr
Answers
The conjugate base of HCN is CN^-
The conjugate base of HBr is Br^-
In the calculations it was assumed that:
a. Before any acetic acid was added, essentially all the indicator was in the In-form.
b. After the HCl was added, essentially all the indicator was in the HIn form.
Required:
Justify these assumptions using the measured pH of these solutions and your experimental value for pKHIn to determine:
1. The fraction of the indicator in the HIn form in solution B before any of solution A was added.
2. The fraction of the indicator in the In- form after the HCl was added.
Answers
Answer:
Following are the responses to the given points:
Explanation:
Form the above-given question, it indicates that the bromate ion green ionizes in water to form a green-blue solution, therefore the before adding the HCL it indicator was in anionic from hence it is written as In^{-} therefore the HCL is mixed which the anion is protonated to give HIN
A 2.5 M solution of a weak acid is prepared. Using a pH meter, the pH is measured to be 5.1. Calculate the acid ionization constant, [tex]K_{a}[/tex] , of this weak acid.
Show your work
Answers
Molarity of acid=2.5M
pH=5.1.
ka=?
Now
We need to write an eqn to show the dissociation of the acid
HA + H2O === H3O+ + A-
Writing The Equilibrium(Or Acid dissociation constant) of this reaction
Ka =[H3O+] {A-]/ {HA].
The concept behind this is
concentration of Products divided by those of reactants. Water is not written because its a pure liquid and does not affect the Equilibrium constant.
Now If you have any Idea on ICE tables..
You'd know that the concentration of acid will decrease by 2.5-x
Whilst the products...will increase by x each
Note: This is when the ratio of their Moles are in 1:1
ka= x.x/2.5-x
Since the Moles of A- and H3O+ are in 1:1... Their concentrations at equilibrium will be the same
so
Ka= x²/2.5-x
Now what is x??
x is the Hydrozonium ion concentration.
we can get it from the pH formula
pH= -log (H3O+)
Making H3O+ subject by applying Logarithm Rules
H3O+ = 10^-ph
x=10^-5.1
=7.94x10^-6.
Now back to Ka
Ka= x²/2.5-x
Ka= (7.94x10^-6)²/2.5-(7.94x10^-6)
Ka= (7.94x10^-6)²/2.4999
Ka= 2.52x10^-11.
Was a Fun One
The ionization constant of this weak acid is [tex]2.52*10^{-11}[/tex]. The values can be substituted in dissociation formula.
What information do we have?
Molarity of acid=2.5M
pH=5.1
To find:
ka=?
Calculation of ionization constant:[tex]HA + H_2O < === > H_3O^+ + A^-[/tex]
The value of dissociation constant will be:
[tex]Ka =[H_3O^+] [A^-]/ {HA][/tex]
The Moles of A- and H3O+ are in 1:1.Their concentrations at equilibrium will be the same.
[tex]Ka= x.x/2.5-x\\\\Ka= x^2/2.5-x\\\\pH= -log (H_3O^+)\\\\H_3O^+ = 10^{-pH}\\\\x=10^{-5.1}\\\\x=7.94*10^{-6}[/tex]
[tex]Ka= x^2/2.5-x\\\\Ka= (7.94*10^{-6})^2/2.5-(7.94*10^{-6})\\\\Ka= (7.94*10^{-6})^2/2.4999\\\\Ka= 2.52*10^{-11}\\\\[/tex]
Thus, ionization constant of this weak acid is [tex]2.52*10^{-11}[/tex].
Find more information about ionization constant here:
brainly.com/question/2284518
For the reaction 2Na + Cl2 2NaCl, calculate the percent yield if
155.0 g of chlorine (Cl2) should be produced and your experiment
produced 143 g (C12).
Answers
Answer:
[tex]Y=92.25\%[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction, it is possible for us to calculate the percent yield by dividing the actual yield of 143 grams of gaseous chlorine by the theoretical yield of 155 g of this gas. In such a way, we proceed as follows:
[tex]Y=\frac{143g}{155g} *100\%[/tex]
Which has a result of:
[tex]Y=92.25\%[/tex]
Regards!
Considering the side chain of each of the amino acids at pH 7.4, is that amino acid classified at neutral, basic, or acidic? You are currently in a sorting module. Turn off browse mode or quick nav, Tab to items, Space or Enter to pick up, Tab to move, Space or Enter to drop. Neutral Basic Acidic
Answers
Answer:
Considering the side chain of each of the amino acids at pH 7.4, is that amino acid classified at neutral, basic, or acidic? You are currently in a sorting module. Turn off browse mode or quick nav, Tab to items, Space or Enter to pick up, Tab to move, Space or Enter to drop. Neutral Basic Acidic
The answer is in the the images. I have placed all the structures in the specific boxes. I hope this helps.
What is the the heat of reaction, delta, in kJ/mol?
a) -26kJ/mol
b) -25kJ/mol
c) -10kJ/mol
d)-35kJ/mol
Answers
Answer:
b) -25 kJ/mol.
Explanation:
Hello there!
In this case, since the general definition of the enthalpy of reaction involves the subtraction of the energy of the products and the energy of the reactants:
[tex]\Delta H=H_{prod}-H_{react}[/tex]
Thus, since the graph shows that the energy of the products is 20 kJ/mol and that of reactants 45 kJ/mol, we will obtain:
[tex]\Delta H=20kJ/mol-45kJ/mol\\\\\Delta H=-25kJ/mol[/tex]
Which means it is exothermic.
Regards!
A chemistry student needs 30.0 g of acetic acid for an experiment. He has available 1.2 kg of a 7.58% w/w solution of acetic acid in acetone.
Calculate the mass of solution the student should use. If there's not enough solution, press the "No solution" button.
Round your answer to 3 significant digits.
Answers
Answer:
The mass of solution will be "395.78 g".
Explanation:
Given:
Mass of acetic acid,
= 30 g
Percentage,
= 7.58% w/w
Now,
⇒ % [tex]=\frac{Mass \ of \ acetic \ acid}{Mass \ of \ solution}\times 100[/tex]
By putting the values, we get
⇒ [tex]7.58=\frac{30}{Mass \ of \ solution}\times 100[/tex]
⇒ [tex]Mass \ of \ solution=\frac{30\times 100}{7.58}[/tex]
⇒ [tex]=\frac{3000}{7.58}[/tex]
⇒ [tex]=395.78 \ g[/tex]
sodium is an inactive metal why
Answers
Answer:
Inactive metals are inert metals that doesn’t react with most of the chemicals.They are highly resistant to oxidation and corrosion when exposed to moisture.
Explanation: