Answer:
pressure = P1/2
Explanation:
using boyles law
P1V1=P2V2
V2 = 2V1
P1V1=P2 x 2V1
P1 = p2 x 2
P2 = P1/2
For the reaction 2 A - Products, the concentration of A is monitored over time. A graph of [A] versus time was found to be linear, with a negative slope. Select the true statement regarding this reaction.
A) The reaction is first order with respect to A.
B) The reaction is second order with respect to A.
C) The rate constant has a negative value.
D) In 2 The reaction has a half-life equal to k.
E) None of these statements is true.
Answer:
none of these statements is true
according to the question E) None of these statements is true.
What is a concentration in chemistry?The concentration of a chemical substance expresses the amount of a substance present in a mixture. There are many different ways to express concentration. Chemists use the term solute to describe the substance of interest and the term solvent to describe the material in which the solute is dissolved
What is concentration in chemistry units?
Quantitative units of concentration include molarity, molality, mass percentage, parts per thousand, parts per million, and parts per billion.
Learn more about concentration here
https://brainly.com/question/24595796
#SPJ2
) Which property listed below is NOT that associated with a metallic atomic solid: (a) electrically (b) elastic (c) high melting (d) tough insulating point
Answer:
I'd say elastic
Metallic atomic solids, forming metal objects, can pass electric currents through, need a lot of heat to melt, and since electricity can easily pass through, it's quite tough/impossible to find an insulating point.
If the reaction CH4(g) O2(g) <--> CO2(g) 2H2O(g) is in equilibrium, what is the effect of adding a catalyst
Answer:
Adding a catalyst increases the speed of the reaction.
Explanation:
The catalyst increases the reaction rate since what it does is to consume the reagents more easily in order to obtain the products faster.
The catalysts DO NOT ALTER THE QUANTITY OF PRODUCTS OR REAGENTS, that is to say that they do not add grams nor do they intervene in the masses of the chemical compounds of the reaction, they only speed up the procedure.
A voltaic cell is created by using a copper cathode and a magnesium anode. The cathode is immersed in a solution of Cu2 ions, and the anode is immersed in a solution of Mg2 ions. A salt bridge of Na2SO4 is also used. What happens to the ions in the salt bridge as the reaction proceeds
Answer:
As the reaction proceeds in the given voltaic cell, the Na₂SO₄ present in the salt bridge will dissociate into Na⁺ and SO₄²⁻ ions. As the copper ions in the solution are being deposited on the copper cathode as neutral copper atoms, the solution will become more negative, therefore the Na⁺ ions in the salt bridge will migrate into the the solution in order to maintain electrical neutrality. At the anode, as the Mg metal dissolve into the solution as Mg⁺² ions, the solution will tend to become more positive. Therefore, the SO₄²⁻ ions present in the salt bridge will migrate into the solution in order to maintain electrical neutrality.
Explanation:
A voltaic or galvanic cell is an example of an electrochemical cell.
An electrochemical cell is a device that produces an electric current from chemical reactions occuring within it.
Electrochemical cells have two electrodes; the anode and the cathode. The anode is defined as the electrode where oxidation occurs while the cathode is the electrode where reduction occurs.
The voltaic cell uses two different metal electrodes each immersed in an electrolyte solution. The two electrodes are connected to each other by means of a wire which allows the flow of electrons from the anode to the cathode. The electrolytes are connected by means of a salt bridge which is a junction that connects the electrolytic solution in the anode and cathode compartment. The salt bridge usually consists of a strong electrolyte like NaCl, KCl, Na₂SO₄, etc.
The electrolyte in the salt bridge serves two purposes: it completes the circuit by providing a path for electron flow and it maintains electrical neutrality in both solutions by allowing ions to migrate between them.
As the reaction proceeds in the given voltaic cell above, the Na₂SO₄ present in the salt bridge will dissociate into Na⁺ and SO₄²⁻ ions. As the copper ions in the solution are being deposited on the copper cathode as neutral copper atoms, the solution will become more negative, therefore the Na⁺ ions in the salt bridge will migrate into the the solution in order to maintain electrical neutrality. Also, at the anode, as the Mg metal dissolve into the solution as Mg⁺² ions, the solution will tend to become more positive. Therefore, the SO₄²⁻ ions present in the salt bridge will migrate into the solution in order to maintain electrical neutrality.
Temperature farthest from the
initial temperature (22.5°C)
COMPLETE
RETRY
Answer:
The next part is 8.8
Explanation:
You're gonna subtract 31.3 by 22.5 which is 8.8
You're welcome :)
The value of q-cal is 142.8 J in the reaction of magnesium and hydrochloric acid in a different constant pressure calorimeter with a calorimeter constant of 12.75 J/degrees Celsius.
What is calorimeter?A calorimeter is a device that measures the amount of heat in a chemical or physical process.
To calculate the value of q-cal (heat absorbed or released by the calorimeter), we need to use the following equation:
q = C * ΔT
Where q is the heat absorbed or released by the calorimeter, C is the calorimeter constant, and ΔT is the change in temperature.
In this case, we know that the calorimeter constant is 12.75 J/degrees Celsius, the initial temperature is 22.5 degrees Celsius, and the final temperature is 33.7 degrees Celsius.
Therefore, we can calculate ΔT as:
ΔT = final temperature - initial temperature
ΔT = 33.7°C - 22.5°C
ΔT = 11.2°C
Substituting these values into the equation, we get:
q = C * ΔT
q = 12.75 J/°C * 11.2°C
q = 142.8 J
Therefore, the value of q-cal is 142.8 J.
For more details regarding calorimeter, visit:
https://brainly.com/question/4802333
#SPJ7
Your question seems incomplete, the probable complete question is:
Suppose you perform the reaction of magnesium and hydrochloric acid in a different constant pressure calorimeter with a calorimeter constant of 12.75 J/degrees Celsius. The initial temperature in the calorimeter is 22.5 degrees Celsius and the final temperature after the reaction is 33.7 degrees Celsius. What is the value of q-cal?
Type Calculations. Given the balanced equation: 2 Al + 3 H2SO4---> Al2(SO4)3 + 3 H2 Molar mass (g/mol): Al=26.98; H2SO4=98.08; Al2(SO4)3= 342.15; H2=2.02 A) How many mole of H2 gas can be produced when 33.8 g of Al are consumed? B) When 1.60 mol of H2SO4 are used in a reaction, how many grams of Al2(SO4)3 can be produced? C) For part B,if actual yield for Al2(SO4)3 is 100.0 g, what is percent yield?
Answer:
A. 1.88 mol H₂
B. 182 g Al₂(SO₄)₃
C. 54.8%
Explanation:
2 Al + 3 H₂SO₄ ⇒ Al₂(SO₄)₃ + 3 H₂
A. Convert grams of Al to moles. The molar mass is 26.98 g/mol.
(33.8 g)/(26.98 g/mol) = 1.253 mol Al
Use stoichiometry to convert moles of Al to moles of H₂. Looking at the equation, you can see that for every 2 mol of Al consumed, 3 moles of H₂ is produced. Use this relationship.
(1.253 mol Al) × (3 mol H₂)/(2 mol Al) = 1.879 mol H₂
You will produce 1.88 mol of H₂ gas.
B. Again, use stoichiometry. For every 3 moles of H₂SO₄ consumed, 1 mole of Al₂(SO₄)₃ is produced.
(1.60 mol H₂SO₄) × (1 mol Al₂(SO₄)₃/3 mol H₂SO₄) = 0.533 mol Al₂(SO₄)₃
Convert moles of Al₂(SO₄)₃ to grams. The molar mass is 342.15 g/mol.
(0.533 mol) × (342.15 g/mol) = 182.48 g Al₂(SO₄)₃
You will produce 182 g of Al₂(SO₄)₃.
C. Calculate percent yield by dividing the actual yield by the theoretical yield. Multiply by 100%.
(100.0/182.48) × 100% = 54.8%
The percent yield is 54.8%.
When performing a gram stain, it is necessary to remove crystal violet stain from any gram negative bacteria on the slide. Microbiologists use a decolorizing solution to accomplish this. A common recipe is equal parts 95% ethanol and acetone. How many mL of water would you need to add if you have 99% ethanol and want to end up with 500 mL of decolorizer
Answer:
10.11 mL
Explanation:
Given that :
Total volume of decolorizer = 500 mL
A common recipe is equal parts 95% ethanol and acetone.
So;
The volume of 95% ethanol in the decolorizer = 500mL/2 = 250 mL
Let represent V(ml) for the 99% of ethanol needed to make 95% of the 250 mL of ethanol;
Therefore:
V(ml) × 0.99 = 250 × 0.95
V(ml) × 0.99 = 237.5
V(ml) = 237.5/0.99
V(ml) = 239.89 mL
Hence; the amount of water to be added to 95% of ethanol = ( 250 - 239.89 )mL = 10.11 mL
The reaction below produces _________________________ Question 5 options: A) trans-1,2-diol B) cis-1,2-diol C) a halohydrin D) an alcohol
Answer:
C) a halohydrin
Explanation:
In organic chemistry, a halohydrin is a compound whereby halogen and hydroxyl functional groups are bonded to adjacent carbon atoms in the molecule. Halohydrins are formed from alkenes such as cyclohexene in this case.
NBS is a very suitable alternative to Br2 in the synthesis of a halohydrin. Recall that the reactive intermediate when bromine reacts with an alkene is the brominium ion which is a three atom ring ion. If excess water is used as the solvent, then the water attacks the brominium ion to yield the product halohaydrin with trans a trans stereochemistry.
4. What are the potential sources of error that might cause disagreement between the activity series' prediction of reactions and your observations of reactions
Answer:
1. Not to have enough salt water on the foil
2.not cleaning the foil well to remove interfering materials
Which of the following is an alkali metal?
A. Lithium (LI)
B. Boron (B)
c. Calcium (Ca)
D. Krypton (Kr)
Answer:
lithium is akali metal
Answer:
lithium is an alkali metal as it lies in group 1st in modern perodic table.
Gallium chloride is formed by the reaction of 2.25 L of a 1.50 M solution of HCl according to the following equation: 2Ga 6HCl --> 2GaCl3 3H2 Determine the mass of gallium chloride, in grams, produced. Group of answer choices
Answer:
198.56g of GaCl3
Explanation:
We'll begin by calculating the number of mole HCl in 2.25 L of a 1.50 M solution of HCl. This is illustrated below:
Molarity of HCl = 1.50 M
Volume = 2.25 L
Mole of HCl =..?
Molarity = mole /Volume
1.5 = mole /2.25
Cross multiply
Mole = 1.5 x 2.25
Mole of HCl = 3.375 mole
Next, we shall determine the number of mole Gallium chloride, GaCl3 produced from the reaction. This is shown below:
2Ga + 6HCl —> 2GaCl3 + 3H2
From the balanced equation above,
6 moles of HCl reacted to produce 2 moles of GaCl3.
Therefore, 3.375 mole of HCl will react to produce = (3.375 x 2)/6 = 1.125 mole of GaCl3.
Therefore, 1.125 moles of GaCl3 were produced from the reaction.
Next, we shall convert 1.125 mole of GaCl3 to grams. This is illustrated below:
Molar mass of GaCl3 = 70 + (35.5x3) = 176.5g/mol
Mole of GaCl3 = 1.125 mole
Mass of GaCl3 =..?
Mole = mass /Molar mass
1.125 = mass of GaCl3 /176.5
Cross multiply
Mass of GaCl3 = 1.125 x 176.5
Mass of GaCl3 = 198.56g
Therefore, 198.56g of GaCl3 were produced from the reaction.
Which products are formed when aluminum is added to a silver chlorine solution?
Answer:
Alcl3 and Cl2
Explanation:
the product above will be formed
Answer:
silver (Ag) and aluminum chloride (AlCl₃)
Explanation:
The reaction between aluminum and silver chloride is a single replacement reaction. A single replacement reaction is when one element switches places with another.
Al + 3AgCl ➔︎ 3Ag + AlCl₃
In the reaction, the cations (positively charged ions) switch places. Aluminum (Al) switches places with Silver (Ag). So, the products of the reaction are silver and aluminum chloride.
Hope this helps.
New technologies have allowed buildings to become taller and heavier than
ever before. This is an example of:
A. green design.
B. the engineering process.
C. the evolution of building techniques.
D. material failure.
Answer:
C. the evolution of building techniques
Hope this helps.
10. Which functional group is present in the molecule?
Alcohol
It carries at least one hydroxyl functional group ( i.e -OH ) bound to a saturated carbon atom.
Therefore the functional group present is -OH functional group.
Answer:
Carboxylic acid
Explanation:
Calculate the wavelength in meters of electromagnetic radiation that has a frequency of 1.09 × 10⁸ s⁻¹. (c = 3.00 X 10⁸ m/s)
Answer:
2.75X10^16
Explanation:
C=FXwavelength
wavelength=C/F
We have that for the Question "Calculate the wavelength in meters of electromagnetic radiation that has a frequency of 1.09 × 10⁸ s⁻¹."
it can be said that the wavelength in meters of electromagnetic radiation that has a frequency of 1.09 × 10⁸ s⁻¹ is
[tex]\lambda=2.7522m[/tex]
From the question we are told
Calculate the wavelength in meters of electromagnetic radiation that has a frequency of 1.09 × 10⁸ s⁻¹. (c = 3.00 X 10⁸ m/s)
Generally the equation for the Wavelength is mathematically given as
[tex]\lambda=\frac{c}{f}\\\\Therefore\\\\\lambda=\frac{c}{f}\\\\\lambda=\frac{3*10^8}{1.09*10^8}\\\\[/tex]
[tex]\lambda=2.7522m[/tex]
Therefore
the wavelength in meters of electromagnetic radiation that has a frequency of 1.09 × 10⁸ s⁻¹ is
[tex]\lambda=2.7522m[/tex]
For more information on this visit
https://brainly.com/question/23379286
Which example describes a use for gemstones?
fabrics
plastics
drill bits
paper clips
Answer:
Drill bits
Explanation:
Gemstones such as diamonds are used in drill bits because of their hardness.
They are a 10 on the Mohs scale of hardness, which runs from 0 to 10.
Drill bits are produced from gemstones due to their hardness.
What are gemstones?Gemstones are the name given to pieces of minerals that can be cut and polished valuable accessories.
Gemstones such as diamonds are used in drill bits because of their hardness.
Examples of drill bitsBrad Point Drill BitsMasonry Drill BitsRivet Drill BitsSpade Drill BitsThus, drill bits are produced using gemstones.
Learn more about gemstones here: https://brainly.com/question/24448445
A sample of gas has an initial volume of 22.6 L at a pressure of 1.67 atm. If the sample is compressed to a volume of 10.0 L : , what will its pressure be? (Assume constant temperature.)
Answer:
3.74 atmospheres
Explanation:
If the temperature is constant, then the formula is
V*P = V1 * P1
V = 22.6 L
P = 1.67 atm
V1 = 10.0 L
P1 = ??
=============
22.6 * 1.67 = 10 * P1
37.742 = 10 * P1
37.742/10 = P1
P1 = 3.742
Note there are 3 sig digs in each given, so the answer should be
P1 = 3.74 atmospheres
calculate the molarity of a solution containing 15.2 grams of nacl dissolved in 2.5 l of solution
Answer:
THE MOLARITY OF THE SOLUTION IS 0.1039 MOL/DM3
Explanation:
Molarity is the number of moles of solute in a given solution,
Molarity in mol / dm3 = Molarity in g/dm3 / Molar mass
Mass = 15.2 g
Volume of solution = 2.5 l
Molar mass of NaCl = (23 + 35.5) = 58.5 g/mol
First, we calculate the molarity in g/dm3
Molarity in g/dm3 = mass /volume
= 15.2 g * 1 L / 2.5 L
=6.08 g /dm3
Hence, we will introduce the values and solve for molarity in mol/dm3
Molarity = 6.08 g/dm3/ 58.5 g/mol
Molarity = 0.1039 mol/dm3
The molarity of the solution is 0.1039 mol/dm3
Calculate the vapor pressure of water above a solution prepared by dissolving 28.5 g of glycerin 1C3H8O32 in 125 g of water at 343 K
Answer:
Vapour pressure of the solution is 223.8mmHg
Explanation:
Based on Raoult's law, vapour pressure of a solution decreases related to the vapour pressure of the pure solvent following the equation:
[tex]P_{solution} = X_{solvent}P_{solvent}^0[/tex]
Where P is vapour pressure and X mole fraction of each related substance.
Vapour pressure of pure water is 233.8mmHg
To find Mole fraction of the solution you need to find moles of glycerin and moles of water, mole fraction of water will be:
[tex]\frac{n_{water}}{n_{water}+n_{glycerin}}[/tex]
Moles of water (Molar mass: 18.02g/mol):
125g × (1mol / 18.02g) = 6.937 moles water
Moles of glycerin (Molar mass: 92.09g/mol):
28.5g × (1mol / 92.09g/mol) = 0.309 moles glycerin
Thus, mole fraction of water, X, is:
[tex]\frac{6.937mol}{6.937mol+0.309mol}[/tex]
= 0.957
Replacing in Raoult's law:
[tex]P_{solution} = 0.957*233.8mmHg[/tex]
P = 223.8mm Hg
Vapour pressure of the solution is 223.8mmHg
Which process is endothermic?a)b)c)d)The evaporation of water from the skin.The burning of candle wax.The oxidation of iron in a chemical hand warmer.The combustion of natural gas in a stove
Answer:
The answer is option a. The evaporation of water from the skin
Explanation:
An endothermic reaction is any synthetic reaction that retains heat from its environment. The ingested energy gives the enactment energy to the reaction to happen.
No new bonds formed, no bonds broken in this example. water molecules go from liquid to vapour (gas ), intermolecular bond exist between polar (-OH) molecules and energy is required to break these bonds during the change from liquid to gas. So, it is endothermic .
Remaining three above examples are exothermic. combustion of gas releases energy(exothermic). burninig of the candle exothermic because the energy released from the oxygen into carbon dioxide and water.oxidation of iron also exothermic
A temperature of 41 Fahrenheit is the same as
Answer:
5 degrees Celsius.
Explanation:
Temperature measures the average kinetic energy of particles of the substances. Therefore a temperature of 41 Fahrenheit is the same as 5 degree Celsius
What is temperature?
Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.
Temperature can be measured in degree celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.
We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:
°C={5(°F-32)}÷9
Substituting given values in above equation
°C= {5(41-32)}÷9
°C= 5°C
Therefore a temperature of 41 Fahrenheit is the same as 5 degree Celsius
To know more about temperature, here:
https://brainly.com/question/13694966
#SPJ6
Electronegativity is a concept that is useful along with other concepts in Group of answer choices predicting the polarity of a bond formulating a statement of the octet rule determining the charge of a negative ion deciding how many electrons are involved in a bond
Answer:
Predicting the polarity of a bond is the correct answer to this question.
Explanation:
Polar-covalent bonded substances have atoms that are distributed unequally among the central atom. The polarity of this bond is essentially determined by the bound atoms uniformly electronegativities.
To evaluate the polarity using numerical means of a covalent bond, if the result is between 0.4 and 1.7, then the bond is usually polar covalent.
Determine the [OH⁻] concentration in a 0.344 M Ca(OH)₂ solution.
Answer:
[tex]0.688M[/tex]
Explanation:
Hello,
In this case, it is widely acknowledged that strong bases usually correspond to those formed with metals in groups IA and IIA which have relatively high activity and reactivity, therefore, when they are dissolved in water the following dissociation reaction occurs (for calcium hydroxide):
[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]
In such a way, for the same volume, we can compute the concentration of hydroxyl ions by simple stoichiometry (1:2 molar ratio):
[tex]0.344\frac{molCa(OH)_2}{L}*\frac{2molOH^-}{1molCa(OH)_2} \\\\0.688\frac{mol OH^-}{L}[/tex]
Or simply:
[tex]0.688M[/tex]
Regards.
conductors such as metal are materials that have a
Answer:
Conductors allow a flow of current or a charge of flow
I hope this helped! Please rate it the brainlist if possible, thanks
Carbon dioxide gas reacts with liquid water to produce aqueous carbonic acid.” Which chemical equation correctly translates this description? CO2 (s) + H2O (g) → H2CO3 (s) CO2 (l) + H2O (l) → H2CO3 (l) CO2 (g) + H2O (g) → H2CO3 (aq) CO2 (g) + H2O (l) → H2CO3 (aq)
Answer: CO2(g)+H2O(I) > H2CO3(Aq)
Explanation:
Got it right?
Using GRIGNARDS REAGENT convert methane to ethanol
Answer:
J
Explanation:
Look at the reaction below and state which direction the reaction would shift: A closed container of water and its vapor at equilibrium. Vapor is added to the system.
Water + Energy <=> Vapor
explain
Answer:
According to Le Chatelier's principle, adding additional reactant to a system will shift the equilibrium to the right, towards the side of the products. ... If we add additional product to a system, the equilibrium will shift to the left, in order to produce more reactants.
Just as one dozen eggs always has 12 eggs in it, one mole of a
substance always has the same number of particles in it, 6.02 x 1023.
If you measure 27.0 g of aluminum foil, which is 1 mole of aluminum,
how many Al atoms does it contain?
Answer:
[tex]6.022x10^{23}atoms \ Al[/tex]
Explanation:
Hello,
In this case, given the described concept regarding the Avogadro's number, we can easily notice that 27.0 g of aluminium foil has 6.022x10²³ atoms as shown below based on the mass-mole-particles relationship:
[tex]27.0gAl*\frac{1molAl}{27.0gAl} *\frac{6.022x10^{23}atoms \ Al}{1molAl} \\\\=6.022x10^{23}atoms \ Al[/tex]
Notice this is backed up by the fact that aluminium molar mass if 27.0 g/mol.
Best regards.
Fe(s)+ 2 HC2H3O2(aq) → Fe(C2H3O2)2(aq) + H2(g) Which substance is reduced and which subject is oxidized?
Answer:
- Iron is oxidized from 0 to +2.
- Hydrogen is reduced from +1 to 0.
Explanation:
Hello,
In this case, for the given reaction, we must first indicate the oxidation state of each element (notice that HC2H3O is acetic acid)
[tex]Fe ^0(s)+ 2 H^+(C_2H_3O_2)^-(aq) \rightarrow Fe^{2+}(C_2H_3O_2)_2^-(aq) + H_2^0(g)[/tex]
Thereby, notcing that iron is alone at the beginning, it has zero as its oxidation state, but once the reaction is undergone, it changes to +2, moreover, the displaced hydrogen in the acetic acid is with +1 but after the chemical reaction it becomes alone for which its oxidation state is 0, thereby, we find that:
- Iron is oxidized from 0 to +2.
- Hydrogen is reduced from +1 to 0.
Best regards,
A buffer solution is prepared from equal volumes of 0.200 M acetic acid and 0.600 M sodium acetate. Use 1.80 x 10−5 as Ka for acetic acid. (a) What is the pH of the solution? (b) Is the solution acidic or basic? (c) What is the pH of a solution that results when 3.00 mL of 0.034 M HCl is added to 0.200 L of the original buffer
Answer:
a. pH = 5.22
b. Acidic.
c. pH = 5.14
Explanation:
a. It is possible to find the pH of a buffer using Henderson-Hasselbalch equation (H-H equation):
pH = pKa + log₁₀ [A⁻] / [HA]
Where pKa is -log Ka (For acetic acid = 4.74), [A⁻] is molar concentration of conjugate base (Acetate salt) and [HA] concentration of the weak acid (Acetic acid).
Replacing:
pH = 4.74 + log₁₀ [0.600M] / [0.200M]
You use the concentration of the acetic acid and sodium acetate because you're adding equal volumes, doing the ratio of the species the same
pH = 5.22
b. As the solution has a pH lower that 7.0, it is considered as a acidic solution.
c. When you add HCl to the buffer, the reaction is:
CH₃COO⁻ + HCl → CH₃COOH + Cl⁻
Where acetate ion reacts with the acid producing acetic acid.
As you have 0.200L of the buffer, 0.100L are of the acetate ion and 0.100L of the acetic acid. Initial moles of both compounds and moles of HCl added are:
CH₃COO⁻: 0.100L ₓ (0.600mol / L) = 0.0600 moles
CH₃COOH: 0.100L ₓ (0.200mol / L) = 0.0200 moles
HCl: 3.0mL = 3x10⁻³L ₓ (0.034mol / L) = 0.00010 moles HCl
The moles added of HCl are the same moles you're consuming of acetate ion and producing of acetic acid. Thus, moles after the reaction are:
CH₃COO⁻: 0.0600 moles - 0.0001 moles = 0.0509 moles
CH₃COOH: 0.0200 moles + 0.0001 moles = 0.0201 moles
Replacing in H-H equation:
pH = 4.74 + log₁₀ [0.0509moles] / [0.0201moles]
pH = 5.14
(a) The pH of the solution is 5.22
(b) The solution is Acidic
(c) The pH of the resultant solution is 5.14
Henderson-Hasselbalch Equation:(a) The pH of a buffer can be calculated by using (H-H equation):
pH = pKa + log₁₀ [A⁻] / [HA]
Where pKa is -log Ka (for acetic acid = 4.74),
[A⁻] is the molar concentration of Acetate salt, and
[HA] concentration of the Acetic acid
According to the question:
pH = 4.74 + log₁₀ [0.600M] / [0.200M]
pH = 5.22
(b) The pH of the solution is lower than 7.0, therefore it is an acidic solution.
(c) After adding HCl to the buffer, the reaction is:
CH₃COO⁻ + HCl → CH₃COOH + Cl⁻
We have 0.200L of the buffer, 0.100L are of the acetate ion and 0.100L of the acetic acid.
The initial amount of compounds added are:
CH₃COO⁻: 0.100L ₓ (0.600mol / L) = 0.0600 moles
CH₃COOH: 0.100L ₓ (0.200mol / L) = 0.0200 moles
HCl: 3.0mL = 3x10⁻³L ₓ (0.034mol / L) = 0.00010 moles HCl
The HCl reacts with the same amount of acetate ion and produces acetic acid. Thus, moles after the reaction are:
CH₃COO⁻: 0.0600 moles - 0.0001 moles = 0.0509 moles
CH₃COOH: 0.0200 moles + 0.0001 moles = 0.0201 moles
From the H-H equation:
pH = 4.74 + log₁₀ [0.0509moles] / [0.0201moles]
pH = 5.14
Learn more about H-H equation:
https://brainly.com/question/26746644?referrer=searchResults