Answer:
Work done = 838470 Joules.
Explanation:
Given the following data;
Power = 19 hp
Time = 1 minute to seconds = 60 seconds.
Next, we would convert the unit of power in "hp" to "Watt."
1 Watt = 0.00135962 horsepower
x Watt = 19 horsepower
Cross-multiplying, we have;
19 = 0.00135962x
x = 19/0.00135962
x = 13974.5 Watts.
Now, to find the work done in moving the mower;
Work done = power * time
Substituting into the formula, we have;
Work done = 13974.5 * 60
Work done = 838470 Joules.
2. An object's weight is proportional to its _ or _ from another object
Answer:
mass
gravitational pull
It takes 29.53 days for the Moon to rotate around Earth. What would happen if the Moon does not rotate or rotates faster than it does now?
Answer:
Explanation:
If the Moon rotated as fast as the Earth would we only see one side of the Moon? ... The Moon, on the other hand, rotates once around its own axis every 28 days, and once around the Earth in that same 28 days. The end result of this combination is that the same side of the Moon is always facing the Earth.
Answer:
If the Moon rotated as fast as the Earth would we only see one side of the Moon? ... The Moon, on the other hand, rotates once around its own axis every 28 days, and once around the Earth in that same 28 days. The end result of this combination is that the same side of the Moon is always facing the Earth.
Explanation:
Describe the mirror formula for a concave mirror in a shortcut way
Answer:
1/f =1/v+1/u
Explanation:
Hold your index finger and middle fingers close to each other, leaving a small slit between them about 1 mm in width. Look through the slit into a source of light such as the window or lamp (NOT THE SUN). You will need to look with one eye up close to the slit. Why do the vertical black lines show up when your fingers are close together but not when they are far apart? Explain.
Answer:
I would say tunnel vision cause your only using one eye and if your looking through a tiny space your vision gets blury
Explanation:
What caused the light to shine on the paper above the mirror?
O The light was refracted.
The light was reflected.
The light was amplified.
The light was diffracted.
Answer:
The Light was reflected, b.
Explanation:
If the flashlight was pointed at the mirror, it was reflected because it did not stop on the mirror or go through the mirror or reflect in different ways.
explain how height,acceleration,and speed would affect the movement of a roller coaster
Kennedy and Lilly are in science class. They are asked to prove that some forces are non-contact
forces. The girls list five examples of objects exerting a force on each other without touching. Do you
agree with their list? Tell why or why not?
1. Two like magnetic poles repel each other.
2. Putting on a wool sweater can make your hair get static electricity when it rubs against the
sweater.
3. When you bring two negatively charged balloons near each other they push each other away.
4. Magnets stick to a refrigerator.
Number 1 and 3 demonstrate non-contact forces because the magnets or electrically charged objects exert
forces on each other without touching.
3 is the only example of non-contact forces since like charges repel each other.
Number 1 and 4 are non-contact forces since they both use magnets.
All four are good examples of non-contact forces since they all use either magnets or electric charge which are
non-contact forces.
Answer:1,3 and 5
Explanation:
Some help please :)
At which stage in the life cycle of a star is helium combined to form elements lithium through iron? Explain.
Answer:
Explanation:
During the formation of the universe some 14 billion years ago in the so-called ‘Big Bang’, only the lightest elements were formed – hydrogen and helium along with trace amounts of lithium and beryllium. As the cloud of cosmic dust and gases from the Big Bang cooled, stars formed, and these then grouped together to form galaxies.
What is the speed of light in a medium if the index of refraction is 1.57?
Answer:
1.91 × 10⁸ m/s
Explanation:
[tex]n = \frac{c}{v} \\ 1.57 = \frac{3.0 \times {10}^{8} }{v} \\ v = 1.91 \times {10}^{8} \: ms {}^{ - 1} [/tex]
The speed of light in a medium if the index of refraction is 1.57 is 1.91 * 10⁸ m/s
The refractive index of a material is the ratio of speed of light in air to speed of light in the medium. It is given by:
Refractive index(n) = speed of light in air(c) / speed of light in material(v)
Given that n = 1.57, c = 3 * 10⁸ m/s, hence:
n = c/v
1.57 = 3 * 10⁸ / v
v = 1.91 * 10⁸ m/s
The speed of light in a medium if the index of refraction is 1.57 is 1.91 * 10⁸ m/s
Find out more at: https://brainly.com/question/23750645
3-the-lamps are connected in series. The first-lamp-has-a-current-of2-A and
a resistance of 4 Ohms. The second-lamp has a voltage of 10V. The third-lamp has a
voltage of 6V. Find in this diagram the total voltage, the current for all the lamps, the
total-resistance.
A boy is looking into a plane mirror .His nose is 30 cm in front of the mirror .How far is his nose from where its image appears to be ?
Answer:
60cm
Explanation:
30+30=60
what is the S.I unit of voltage ?
Answer:
V
Explanation:
The S. I unit for voltage is v due to the fact that it's volts.
Which force is sometimes attractive and has an infinite range?
A.strong nuclear
B.weak nuclear
C.gravitational
D.electromagnetic
Answer:
C. gravitational
Explanation:
Answer:
c
Explanation:
edge
Your in a car and you went 385
miles in 4 hours, how fast were
you going?
A student measures the time it takes for two reactions to be completed.
Reaction A is completed in 39 seconds, and reaction B is completed in 50
seconds. What can the student conclude about the rates of these reactions?
A. The rate of reaction A is higher.
B. The rates of reactions A and B are equal.
C. The rate of reaction B is higher.
Answer:
The rate of reaction A is higher.
answer is AAAAA !
Explanation:
Answer: A. The rate of reaction A is higher
Explanation:
what force on a 936kg elevator that is falling freely at 9.8 m/s^2
Answer:
9172.8 N
Explanation:
F = ma
F = (936 kg)(9.8 m/s^2)
F = 9172.8 N
Punnett squares are used by geneticists to determine the probability of
different offspring genotypes.
Answer:
are used by geneticists to determine the probability of different offspring genotypes.
what force is required to accelerate to 10 kg object to 5.9 m/s/s?
Force required to accelerate 10 kg object to 5.9 m/s/s ?
Mass = 10 kg
Acceleration = 5.9 m/s^2
Force = Mass * Acceleration
Force = 10 kg * 5.9 m/s^2
Force = 59 kg m /s^2 = 59 N
PLEASE HELP ME SOLVE ASAP
Answer:
a) The distance after 1 minute will be x = 600 m.
b) The distance of vertical drop from A to B is [tex]\Delta y=17658\: m[/tex].
Explanation:
Let's use the parabolic motion equations. Here we have a horizontal initial velocity, and knowing that the horizontal velocity is a constant we have:
a)
[tex]v_{x}=\frac{\Delta x}{\Delta t}[/tex] (1)
Where:
v(x) is the horizontal velocity (v(x) = 36 km/h = 10 m/s)Δx is the displacement Δt is the time (Δt = 1 min = 60 s)Usinf (1) we find Δx:
[tex]\Delta x=v_{x}\Delta t[/tex]
[tex]\Delta x=10*60=600 m[/tex]
Therefore, the distance after 1 minute will be x = 600 m
b)
Here we need to find Δy = y(A)-y(B), this is the distance of vertical drop from A to B.
Using the following equation we will get it:
[tex]y_{B}=y_{A}+v_{iy}t-\frac{1}{2}gt^{2}[/tex]
Let's recall that the initial velocity in the y-direction is 0.
[tex]y_{A}-y_{B}=0t+\frac{1}{2}gt^{2}[/tex]
[tex]\Delta y=\frac{1}{2}gt^{2}[/tex]
[tex]\Delta y=\frac{1}{2}(9.81)(60)^{2}[/tex]
[tex]\Delta y=17658\: m[/tex]
Therefore, the distance of vertical drop from A to B is [tex]\Delta y=17658\: m[/tex].
I hope it helps you!
A sound wave passes from air into water and then into steel. With each change in medium, what happens to the speed of the
wave?
А
It increases
B
It decreases. C
It increases then decreases
D
It decreases then increases
Answer:
A
Explanation:
if its wronge im so sorry
THE
Ammeter
А
1
592
o
12
Р
А
er
1002
w
Circuit 2
Answer:
child i dont even know the answer for this question
Explanation:
The resistance of a 24 W, 12 V filament lamp depends on the current flowing through the lamp. For currents up to 0.8 A, the resistance has a constant value of 2.5 Ω.
Calculate the potential difference across the lamp when a current of 0.8 A flows through the lamp.
Answer:
V=IR
V=0.8×2.5
V=2V
where V=potential difference
I=Current
R=Resistance
.........
A room that is kept at the same temperature year-round feels warm to someone who comes in from outside during the winter and cool to someone who comes in from outside during the summer. Explain how this can be true.
Answer:
its warmer than outside in winter and its colder than outside in summer
Explanation:
The perception of warmth or coolness is relative to the temperature difference between the body and the environment. Even though the temperature inside the room remains constant year-round, the relative temperature difference between the environment outside and the room can cause a subjective sensation of warmth or coolness.
What is temperature?Temperature is a physical quantity that measures the degree of hotness or coldness of a body or a substance. It is a scalar quantity, which means it has only a magnitude and no direction.
The SI unit of temperature is the Kelvin (K), but the temperature is commonly measured in degrees Celsius (°C) or degrees Fahrenheit (°F) as well.
The temperature difference is the numerical value of the difference between the temperatures of two objects or substances. It represents the amount of heat that flows from one object to another due to the temperature gradient between them. The temperature difference is also a scalar quantity, and its unit is usually expressed in degrees Celsius or Kelvin.
The temperature difference is important in many areas of science and engineering, including thermodynamics, heat transfer, and meteorology. It is also used to measure the efficiency of heating and cooling systems, such as air conditioners and refrigerators.
Here in this question,
This phenomenon occurs due to the relative difference in temperature between the environment outside and the temperature inside the room. The feeling of warmth or coolness is a subjective sensation that depends not only on the actual temperature but also on the difference in temperature between the person's body and their surroundings.
During the winter, the temperature outside is generally colder than the temperature inside the room which is kept at a constant temperature. When a person comes into the room from the cold outside, their body temperature is lower than the room temperature, so they feel warmer inside the room. This is because the heat from the warm room transfers to the person's body, raising their body temperature and making them feel warmer.
On the other hand, during the summer, the temperature outside is usually warmer than the temperature inside the room. When a person comes into the room from the hot outside, their body temperature is higher than the room temperature, so they feel cooler inside the room. This is because the heat from the person's body transfers to the cooler room, lowering their body temperature and making them feel cooler.
Therefore, the relative temperature difference between the environment outside and the room can cause a subjective sensation of warmth or coolness.
To learn about the difference between conduction and convection click:
https://brainly.com/question/13104912
#SPJ3
4. Find the density of 2750 g of a substance that occupies 250 mL.
HELPWhat is the intensity of an electric field at a point where a 0.50 C
charge experiences a force of 20. N?
Remember to identity all of your data, write the equation, and show
your work. (5 points)
Answer:intensity of an electric field (E)
charge (q)
Force (F)
E=F/q
E=20N/.5C
E=40N/C
Explanation:
The Electric field intensity will be 40 N/C
What is an Electric field intensity ?The electric field intensity at a point is the force experienced by a unit positive charge placed at that point.
Electric field intensity(E) = force (F)/ charge(q)
given
charge = 0.50 C
Force = 20 N
Electric field intensity = ?
E = 20 N / 0.50 C
E = 40 N/C
The Electric field intensity will be 40 N/C
learn more about Electric field intensity :
https://brainly.com/question/26446532?referrer=searchResults
#SPJ3
CAN YOU EXPLAIN?
How are waves different, and how do their differences
affect their characteristics?
In the universe there are more small stars than large stars. Do you think there are more white dwarfs or black holes? Explain your answer.
Answer: black holes
Explanation:
Two students move a box to the left. One student pushes with a force of 100 N to the left, and the other student pulls with a force of 85 N to the left. They move the box 20 m in 7 s. What is the total amount of work done on the box by the students?
Answer:
Resultant Force= F1 - F2
F1= 100N
F2= 85N
Resultant Force= 100N - 85N
R.F = 15N
Workdone= Force x Displacement
Force = 15N
Displacement = 20m
= 15N X 20m
=300Nm or Joules
Un asensor de masa 500 kg , con cuatro personas a bordo , cada una con una masa de 75 kg , asciende con una altura de 28 metros Calcula la energia potencial que adquiere el asensor
Answer:
U = 2,195 10⁵ J
Explanation:
The potential energy is
U = m g and
in this case each person has a mass of 75 kg and the elevator has a mass of 500 kg, the total mass is
m_total = m_elevator + 4 m_person
m_total = 500 + 4 75
m_toal = 800 kg
let's calculate
U = 800 9.8 28
U = 2,195 10⁵ J
19. A car accelerates uniformly in a straight line from 10 m/s to 20 m/s in 5 seconds. What is the
acceleration?
Answer:
2 [tex]m/s^{2}[/tex]
Explanation:
Acceleration = [tex]\frac{Final velocity-Initial velocity}{Time}[/tex]
= [tex]\frac{20 - 10}{5}[/tex]
= [tex]\frac{10}{5}[/tex]
= 2 [tex]m/s^{2}[/tex]