Answer:
5 g/cm^3
Explanation:
Density of a substance= mass/ volume
Given:
volume = 4,
mass = 20
Assume volume is in cm^3
Mass is in "g"
Then substitute the values
Density of the substance=( 20/4)
= 5 g/cm^3
What controls the DNA molecule?
Answer:
nucleotides
Explanation:
The four types of nitrogen bases found in nucleotides are: adenine (A), thymine (T), guanine (G) and cytosine (C). The order, or sequence, of these bases determines what biological instructions are contained in a strand of DNA. ... DNA is made of chemical building blocks called nucleotides.
hope that helped :)
What does a nucleus look like
Answer:
Explanation:
The nucleus is an organelle found in eukaryotic cells. Inside its fully enclosed nuclear membrane, it contains the majority of the cell's genetic material. This material is organized as DNA molecules, along with a variety of proteins, to form chromosomes.
How many grams of water are produced when 12.50 mol oxygen reacts with hydrogen?
Answer: According to reaction below, when one mol of oxygen reacts with two mol of hydrogen, two mol of water is produced. Thus, when 2.5 mol of oxygen reacted with hydrogen, 2 * 2.5 mol = 5 mol of water is produced. The molar mass of water is 18 g/mol.
Explanation:
Not My WORK! I got this info from another site. BUT I HOPE IT HELPS :)
definition of spirilla
don't write incorrect answer
Answer:
a bacterium with a rigid spiral structure,found in stagnant water and something causing disease
Which of the following processes
release energy?
A. Water evaporating
B. Ice melting
C. steam condensing
D. wax melting
A metal object with mass of 29.0 g is heated to 97.0 °C and then transferred to an insulated container containing 95.8 g of water at 20.5 °C. The water temperature rises and the temperature of the metal object falls until they both reach the same final temperature of 23.7 °C. What is the specific heat of this metal object? Assume that all the heat lost by the metal object is absorbed by the water.
Answer:
0.603J/g°C is the specific heat of the metal object
Explanation:
To solve this question we must know the heat given by the metal is equal to the heat absorbed by the water. The change in heat follows the equation:
Q = m*S*ΔT
Where Q is heat in Joules, m is the mass of the substance, S its specific heat and ΔT change in temperature
The equation to solve the problem is:
m(Object)*S(Object)*ΔT(Object) = m(Water)*S(Water)*ΔT(Water)
Where:
m(Object) = 29.0g
S(Object) = ??
ΔT(Object) = (97.0°C - 23.7°C = 73.3°C)
m(Water) = 95.8g
S(Water) = 4.184J/g°C
ΔT(Water) = (23.7°C - 20.5°C = 3.2°C)
29.0g*S(Object)*73.3°C = 95.8g*4.184J/g°C*3.2°C
S (Object) * 2125.7g°C = 1282.6J
S(Object) = 0.603J/g°C is the specific heat of the metal object
Sam is visiting the desert. He is standing beside a cactus watching a
snake move across the sand. There is a lizard basking in the sun on a rock
nearby. Which of the following correctly identifies the biotic and abiotic
parts of the ecosystem?
Abiotic: Rock, Sand, Sun Biotic: Cactus, Lizard, Sam, Snake
Abiotic: Cactus, Rock, Sam Biotic: Lizard, Sand, Snake, Sun
Abiotic: Cactus, Rock, Sand, Sun Biotic: Lizard, Sam, Snake
Abiotic: Cactus, Lizard, Sam, Snake Biotic: Rock, Sand, Sun
Answer:
A
Explanation:
Rock sand sun arent living. cactus lizard sam and snake are living or biotic
answer questions 3 and 4 for a brainly!
Answer:
The correct answer is -
3. Butyne
4. Pentene
Explanation:
The names of such organic compounds are classified on the number of the carbon atoms and based on a number these prefixes are attached -
Meth - one carbon
Eth - two carbons
Prop - three carbons
But - four carbons
Pent - five carbons, and so on
The bonds can be identified by names of an organic compound by their suffixes -
- ane = single bond
- ene = double bond
-yne = triple bond
Thus, for question 3, carbon numbers are 4 and triple bond so Butyne, and similarly for question 4, 5 carbon atoms and double bond so Pentene.
ALL THE THINGS YOU SAID ALL THE THINGS YOU SAID RUNING THROUGH MY HEAD RUNNING THROUGH MY HEAD HELPPPP
Answer:
Gamma rays and X-rays
Explanation:
All the things she said
All the things she said
Running through my head
Running through my head
Running through my head
All the things she said
All the things she said
Running through my head
Running through my head
All the things she said
This is not enough
This is not enough
a gas with a volume of 20.0l at a pressure of 275 kpa is allowed to expand to a volume of 35.0l. what is the pressure in the container if the temperature remains constant?
1. 2.54 kPa
2. 157 kPa
3. 481 kPa
pls help ;(
Answer:
[tex]\boxed {\boxed {\sf 2. \ 157 \ kPa}}[/tex]
Explanation:
Since temperature remains constant, the only variables that change are volume and pressure. Therefore, we are using Boyle's Law. This states that the pressure is inversely proportional to the volume. The formula is:
[tex]P_1V_1=P_2V_2[/tex]
We know the gas starts with a volume of 20.0 liters at a pressure of 275 kPa. We can substitute these values into the left side of the formula.
[tex]275 \ kPa *20.0 \ L=P_2V_2[/tex]
We know the gas expands to a volume of 35.0 Liters, but we do not know the pressure.
[tex]275 \ kPa *20.0 \ L=P_2* 35.0 \ L[/tex]
Since we are solving for the new pressure, we must isolate the variable P₂. It is being multiplied by 35.0 Liters and the inverse of multiplication is division. Divide both sides by 35.0 L.
[tex]\frac {275 \ kPa * 20.0 \ L}{ 35.0 \ L}= \frac{P_2*35.0 \ L}{35.0 \ L}[/tex]
[tex]\frac {275 \ kPa * 20.0 \ L}{ 35.0 \ L}=P_2[/tex]
The units of liters cancel.
[tex]\frac {275 \ kPa * 20.0 }{ 35.0 }=P_2[/tex]
[tex]\frac {5500}{35.0} \ kPa= P_2[/tex]
[tex]157.142857 \ kPa=P_2[/tex]
The original measurements of pressure and volume have 3 significant figures, so our answer must have the same. For the number we calculated, that is the ones place.
The 1 in the tenths place (157.142857) tells us to leave the 7 in the ones place.
[tex]157 \ kPa= P_2[/tex]
If the gas expanded to a volume of 35.0 liters while the temperature remained constant, the pressure in container was approximately 157 kilopascals.
HELP PLEASE
1. Locations where volcanoes form far from plate boundaries are called
A. islands
B. hot spots
C. divergent zones
21.) This substance consists of two or more nonmetal elements in a fixed ratio.
a.) element
b.) mixture
c.) molecule
d.) compound
Answer:
Molecule
Explanation:
when two or more than two non-metal elements are combined then it form Molecule.
8.
(a) Tick (™) the box next to the correct statement about the mixture.
mixture of four elements
mixture of four compounds
mixture of two elements and two compounds
mixture of one element and three compounds
Answer:
mixture of four compounds
mixture of two elements and two compounds
Explanation:
it can be one of thosecan u tell me if its correct pls I'm studying this tooWhich layer of the earth is the thinnest and thickest?
Answer:
crust
Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.
Explanation:
Discuss with the whole class what the relative thicknesses of the layers are — that the inner core and outer core together form the thickest layer of the Earth and that the crust is by far the thinnest layer.
what is the best definition of energy?
A. The capacity to measure heat.
B. The capacity to measure mass
C. The capacity to exert strength
D. The capacity to do work
Answer:
D. the capacity to do work
Explanation:
the basic definition of energy is the ability to do work
One of your classmates asks you why an ice cube melts in water. Which of the following
would be your best explanation?
a.) The ice cube transfers energy to the air.
b.) The ice cube transfers energy to the water.
c.) Energy is transferred from the ice to the water and from the water to the ice.
d.) The water transfers energy to the ice cube.
Answer:
the answer is B
Explanation:
the ice puts 8ts cold into the water taking it away from the ice
What does an increase in temperature do to the reaction rate?
Answer:
An increase in temperature typically increases the rate of reaction because an increase in temperature will raise the average kinetic energy of the reactant molecules. Therefore, a greater proportion of molecules will have the minimum energy necessary for an effective collision.Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions. It is only these collisions (possessing at least the activation energy for the reaction) which result in a reaction.
Explanation:
Can you please give this answer a brainliest answer please
Which process is represented by the label a?
Answer:
Sediment to sedimentary rock (and vice versa) is Compactation and Cementation.
Explanation:
This happens via Lithification, which is the compacting of sediments under pressure.
the molar mass of CCI2F2
Answer:
The molar mass and molecular weight of CCI2F2 is 315.8271.
Explanation:
What is the molarity of a solution containing 9.0 moles of solute in 462 mL of solution
Answer:
[tex]\boxed {\boxed {\sf 19 \ M}}[/tex]
Explanation:
Molarity is a measure of concentration in moles per liter, so the formula is:
[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}}[/tex]
This solution has 9.0 moles of solute and 462 milliliters of solution. We must convert milliliters to liters. Remember that 1 liter contains 1000 milliliters.
Create a ratio.
[tex]\frac{ 1 \ L}{ 1000 \ mL}[/tex]Multiply by the value we are converting: 462 milliliters
[tex]462 \ mL *\frac{ 1 \ L}{ 1000 \ mL}[/tex][tex]462 *\frac{ 1 \ L}{ 1000}[/tex][tex]0.462 \ L[/tex]
Now we know both values and we can solve for the molarity.
moles of solute= 9.0 moles liters of solution = 0.462 L[tex]molarity= \frac{9.0 \ mol}{ 0.462 \ L}[/tex]
Divide.
[tex]molarity= 19.4805195 \ mol/L[/tex]
The original measurements of moles and milliliters have 2 and 3 significant figures respectively. We have to round our answer to the least number of sig figs, which is 2 in this case.
For the number we found, that is the ones place. The 4 in the tenths place (19.4805195) tells us to leave the 9 in the ones place.
[tex]molarity= 19 \ mol/L[/tex]
1 mole per liter is equal to 1 molar or M, so our answer is equal to 19 M.
[tex]molarity \approx 19 \ M[/tex]
The molarity of the solution is approximately 19 M.
1. Hay un gas con 700 milímetros de Mercurio de presión en 922 ml de volumen a 20 grados Celsius. Calcula la temperatura final a 500 mm de mercurio con 451 ml.
2. un gas ocupa un gas ocupa 205 mililitros a 20 grados centígrados y 1,05 atm. Calcule el volumen final a 60 grados centígrados y 2,4 Atmósferas de presión.
3. tenemos 22 L de un gas a una temperatura de 220 K y una presión de 5 Atm, si se modifican la presión a 6.5 atm y la temperatura a 200 K, cuál será el volumen que obtenemos.
Answer:
püvinlbxyfsswgrxzvnnchcyv nkivtcdg
Is all the biomass consumed by a primary consumer, such as a brine shrimp, transferred to the secondary consumer, such as a gull, when the brine shrimp is eaten? For instance, if a brine shrimp eats 10 g of algae in its life before the gull eats it, does the gull get 10 g of biomass when it eats the brine shrimp? Why or why not?
5.(08.02 MC)
A 0.680 M Ca(OH)2 solution was prepared by dissolving 55.0 grams of Ca(OH)2 in enough water. What is the total volume of the solution formed? (4 points)
O 1.09 liters
0 1.23 liters
2.01 liters
O 2.18 liters
Answer: 1.09 Liers
Explanation:
I did the problem and got it correct.
Answer:
A. 1.09
Explanation:
I did the Chemistry Exam
explain how lithium atom is positive charge
If a sample of a gas occupies 5.22 L at 235 oC, what will its volume be at 75 oC if the pressure remains the same?
Answer:
1618.2
Explanation:
235+75=310×75=1618.2
Which of the following pH numbers are acidic? (Choose 2)
9
11
7
5
3
the pH numbers that are acidic above is 3 and 5
29.) What charge would you expect from a Group 1 atom when it becomes an ion?
a.) 2-
b.) 2+
c.) 1-
d.) 1+
Answer:
d
Explanation:
It is 1+ because when the periodic table is drawn well into there groups become cations
To determine the molar mass of an element, one must know the element's
a. number of isotopes.
b average atomic mass
c avogradro constant
d atomic number
Answer:
d
Explanation:
from you know the atomic number it should be easy to find
To determine the molar mass of an element, one must know the element's atomic number. Therefore, option D is correct.
What is the atomic number ?An element's atomic number (Z) is the number of protons in the nucleus of each atom of that element. This means that the number of protons is the feature that distinguishes each element from all others. Elements differ based on their atomic number.
Because the combined masses of protons and neutrons account for nearly all the mass of a given atom, the atomic mass of a single atom can be calculated by adding the total number of protons and neutrons of that particular isotope.
The atomic mass of any element on the periodic table can be used to calculate its molar mass.
Thus, option D is correct.
To learn more about an atomic number, follow the link;
https://brainly.com/question/16858932
#SPJ6
Lee and some other students working with Dr. Yung were conducting an experiment and ended up with some confusing results. In the experiment, each student combined sodium and hydrogen chloride, but, as shown in the table below, each student ended up with different results. Lee is trying to determine what happened.
In a few minutes, you will see a video of what happened when Lee combined two substances. Before you watch the video, see if you can predict why each student ended up with different results.
Student's name Starting substances Ending substances
Lee sodium and hydrogen chloride hydrogen and sodium chloride
Vera sodium and hydrogen chloride hydrogen, sodium chloride, and sodium
Domingo sodium and hydrogen chloride hydrogen, sodium chloride, and hydrogen chloride
Why do you think Vera and Domingo ended up with three substances after the chemical reaction while Lee only ended up with two?
Answer:
chung long
Explanation:
cause 3 plus 2 =9
How GM food are produced?
What is genetic modification (GM) of crops and how is it done? GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants.
Answer:
GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants. The seeds produced by these plants will inherit the new DNA.