Answer:
c or b
Explanation:
the story is entertaining and it shares the teachers personal experiences with the teachers students
After adding 20.0 mL of 5% NaOH solution into the remaining organic layer, followed by mixing and venting, the solution separated into two distinct layers. Match the following: Group of answer choices The top layer was the ______________ layer. [ Choose ] 9-fluorenone was most soluble in the ____________ layer. [ Choose ] deprotonated chloroanilic acid was most soluble in the _____________ layer. [ Choose ] The bottom layer was the __________________ layer. [ Choose ] The organic layer was a ________________ colored solution. [ Choose ] The aqueous layer turned into a _____________ colored solution. [ Choose ]
Answer:
The top layer was the organic layer.
9-fluorenone was most soluble in the organic layer.
Deprotonated chloroanilic acid was most soluble in the aqueous layer.
The bottom layer was the aqueous layer.
The organic layer was a yellow colored solution.
The aqueous layer turned into a pink colored solution.
What is an electrolytic cell?
Answer:
An electrolytic cell is a cell that converts electrical energy into chemical energy.
Any device in which electrical energy is converted to chemical energy or vice versa is referred to as an electrolytic cell. A typical cell consists of two metallic or electronic conductors held apart and in contact with an electrolyte, which is usually a dissolved or fused ionic compound.
What is an electrolytic cell ?An electrolytic cell is a type of electrochemical cell that uses an external source of electrical energy to force a chemical reaction that would not occur otherwise. A voltage applied between the cell's two electrodes, an anode and a cathode immersed in an electrolyte solution, serves as the external energy source.
Electrons in the form of an electric current are deliberately pumped through the chemicals in the section to induce an oxidation-reduction reaction. An electrolytic cell is a setup used to electrolytically decompose water into hydrogen and oxygen.
Electrochemical cells that generate an electric current are known as voltaic or galvanic cells, whereas those that generate chemical reactions, such as electrolysis, are known as electrolytic cells.
Thus, Any device in which electrical energy is converted to chemical energy or vice versa is referred to as an electrolytic cell.
To learn more about electrolytic cell, follow the link;
https://brainly.com/question/4030224
#SPJ5
Which of the following particles has the smallest
mass?
A) electron
C) neutron
B) hydrogen atom
D) proton
Answer:
AN ELECTRON HAS THE SMALLEST MASS!
Answer:
A) electron
good luck, i hope this helps :)
1. Mixing Water at Two Temperatures
a. One flask contains 150.0 g water at 20.0 °C. A second flask contains 350.0 g water at 95.0 °C. If the two water samples are mixed, what will the final temperature of the water be?
-Assume that the density of water it 1.000 g/cm^3
-The specific heat capacity for water is 4.184 J/g °C
Answer:
[tex]T_f=72.5\°C[/tex]
Explanation:
Hello!
In this case, since this a problem in which the cold water is heated by the hot water, we can write:
[tex]Q_{hot}+Q_{cold}=0[/tex]
Thus, by plugging in the mass, specific heat and temperatures, we obtain:
[tex]m_{hot}C_{hot}(T_f-T_{hot})+m_{cold}C_{cold}(T_f-T_{cold})=0[/tex]
Now, we can also write:
[tex]m_{hot}(T_f-T_{hot})+m_{cold}(T_f-T_{cold})=0[/tex]
Then, after applying some algebra, it is possible to obtain:
[tex]T_f=\frac{m_{hot}T_{hot}+m_{cold}T_{cold}}{m_{hot}+m_{cold}}[/tex]
If we plug in, we obtain:
[tex]T_f=\frac{350.0g*95.0\°C+150.0g*20.0\°C}{350.0g+150.0g}[/tex]
[tex]T_f=72.5\°C[/tex]
Best regards!
Given the atomic mass of select elements, calculate the molar mass of each salt.
Element Molar mass
(g/mol)
Beryllium (Be) 9.012
Magnesium (Mg) 24.31
Cobalt (Co) 58.93
Cadmium (Cd) 112.41
Bromine (Br) 79.90
Match the numbers to the appropriate blanks in the sentences below. Make certain each sentence is complete before submitting your answer.
View Available Hint(s)
ResetHelp
1. The molar mass of MgBr2 is The molar mass of M g B r 2 is blank..
2. The molar mass of BeBr2 is The molar mass of B e B r 2 is blank..
3. The molar mass of CoBr2 is The molar mass of C o B r 2 is blank..
4. The molar mass of CdBr2 is The molar mass of C d B r 2 is blank..
Choose the combination of factors that creates fog. Record the description of the factors in the Student Guide,
Relative Humidity
Air Temperature
Air Pressure
Check
Pause
Answer:
Relative Humidity
Air Temperature
Explanation:
Relative humidity and air temperature are the factors that creates fog. When the moist and warm air makes contact with the cooler air, water vapor condenses due to low temperature of that region that causes for the formation of fog. So we can say that relative humidity and air temperature are the main factors for the formation of fog in that region.
Answer:
High Cold High
Explanation:
compound composed of cations and anions the forces of attraction that bind oppositely charged ions together lowest whole-number ratio of ions in an ionic compound a depiction of the valence electrons as dots around the symbol for an element a mixture of two or more elements, at least one of which is a metal the attraction of the free-floating valence electrons for the positively charged metal ions ions of the halogen atoms the electron(s) in the highest occupied energy level of an atom the number of ions of opposite charge that surround each ion in a crystal Atoms in a compound tend to have the electron configuration of a noble gas. Shows the kinds and numbers of atoms in the smallest representative unit of a substance a. halide ions b. alloy c. octet rule d. formula unit e. electron dot structure f. ionic compound g. ionic bonds h. coordination number i. chemical formula j. valence electrons k. metallic bond
Answer:
compound composed of cations and anions the forces of attraction that bind oppositely charged ions together - ionic compound
lowest whole-number ratio of ions in an ionic compound - formula unit
a depiction of the valence electrons as dots around the symbol for an element - electron dot structure
a mixture of two or more elements, at least one of which is a metal - alloy
the attraction of the free-floating valence electrons for the positively charged metal - metallic bond
ions of the halogen atoms - halide ions
the electron(s) in the highest occupied energy level of an atom - valence electrons
the number of ions of opposite charge that surround each ion in a crystal - coordination number
Atoms in a compound tend to have the electron configuration of a noble gas - octet rule
Shows the kinds and numbers of atoms in the smallest representative unit - chemical formula
Explanation:
An ionic compound is composed of oppositely charged ions held together in a crystal lattice. The lowest whole-number ratio of ions in an ionic compound is known as the formula unit. The number of ions of opposite charge that surround each ion in a crystal is called the coordination number. Ions of the halogen atoms are negatively charged and are called halide ions
Elements are composed of atoms, the electron(s) in the highest occupied energy level of an atom are called valence electrons. In metals, the attraction of the free-floating valence electrons for the positively charged metal is called the metallic bond. For atoms of elements, a depiction of the valence electrons as dots around the symbol for an element is called the electron dot structure or Lewis structure.
A combination of elements may be a compound or an alloy. An alloy usually contains at least one metal. For compounds, the chemical formula Shows the kinds and numbers of atoms in the smallest representative unit. Atoms form compounds because atoms in a compound tend to have the electron configuration of a noble gas this is the octet rule.
The correct match of the given statement are 1 - f. ionic compound, 2- d. formula unit, 3 - e. electron dot structure, 4- b. alloy, 5- k. metallic bond, 6- a. halide ions, 7- j. valence electrons, 8- h. coordination number, 9 - c. octet rule, 10- i. chemical formula.
Ionic compounds are made up of oppositely charged ions that are kept together in a crystal lattice. The formula unit is the lowest whole-number ratio of ions in an ionic compound.
The coordination number is the number of ions with opposite charges that surround each ion in a crystal. Halide ions are halogen atom ions that are negatively charged.
Elements are made up of atoms, and the electron(s) in the atom's highest occupied energy level are known as valence electrons. The metallic bond refers to the attraction of free-floating valence electrons to positively charged metals in metals.
The electron dot structure or Lewis structure is a representation of the valence electrons as dots around the symbol for an element for atoms.
A compound or an alloy is a mixture of components. A metal is frequently present in an alloy.
The chemical formula is used for compounds. The types and numbers of atoms in the smallest representative unit are displayed.
The octet rule states that atoms in a compound tend to have the electron configuration of a noble gas.
Therefore, the correct matches are: 1 - f. ionic compound, 2- d. formula unit, 3 - e. electron dot structure, 4- b. alloy, 5- k. metallic bond, 6- a. halide ions, 7- j. valence electrons, 8- h. coordination number, 9 - c. octet rule, 10- i. chemical formula.
Learn more about ionic compound, here:
https://brainly.com/question/30420333
#SPJ6
The given question is incomplete, so the most probable complete question is,
Match the correct statement with their appropriate terms:
Compound composed of cations and anions, the forces of attraction that bind oppositely charged ions together.Lowest whole-number ratio of ions in an ionic compound.A depiction of the valence electrons as dots around the symbol for an element.A mixture of two or more elements, at least one of which is a metal.The attraction of the free-floating valence electrons for the positively charged metal.Ions of the halogen atoms.The electron(s) in the highest occupied energy level of an atom.The number of ions of opposite charge that surround each ion in a crystal.Atoms in a compound tend to have the electron configuration of a noble gas.Shows the kinds and numbers of atoms in the smallest representative unit.study the image wich shows an air mass moving into a region wich type of weather will this region most likely experience due to the incoming air mass
Answer:
766ijn
Explanation:
hovibibbunununububububyhybyybybnu
please help :) hope you have a good day
Answer:
the volume of the gas will decrease
Determine the molecular formula for a compound that has a molecular mass of 52.0 g/mole
and and is composed of 92.31% carbon and 7.69% hydrogen.
Answer:
C4H4
Explanation:
92.31% of 52.0 g/mol is 48.0012 g/mol
7.69% of 52.0 g/mol is is 3.9988 g/mol
Carbon has a gram-formula mass of about 12, which goes into 48.0012 about 4 times, so there should be 4 atoms of Carbon
Hydrogen has a gram-formula mass of about 1, which goes into 3.9988 about 4 times, so there should also be 4 atoms of hydrogen
help asap pls,
find the percent composition
Explanation:
1. Pb(CO3)2
Element Number Mass Percet Composition
Oxygen 6 16.00 29.34%
Carbon 2 12.01 7.34%
Lead 1 207.21 63.32%
2. Ga(OH)3
Element Number Mass Percet Composition
Hydrogen 3 1.0079 2.50%
Oxygen. 3 16.00 39.75%
Gallium 1 69.72 57.74%
3. P4O10
Element Number Mass Percet Composition
Oxygen. 10 16.00. 56.36%
Phosphorus. 4 30.97 43.64%
4. Ca3P2
Element Number Mass Percet Composition
Phosphorus 2 30.97 34.00%
Calcium. 3 40.08 66.00%
5. Ti(NO3)3
Element Number Mass Percet Composition
Oxygen. 9 16.00 61.56%
Titanium. 1 47.87 20.47%
Nitrogen. 3 14.01 17.97%
K2HPO4 is a highly water-soluble salt. It can be used as a buffering agent, food additive, or
fertilizer. The neutralization of phosphoric acid with potassium hydroxide can be used to form
potassium hydrogen phosphate.
H3PO4 + 2KOH K2HPO4 + 2H2O
100 g of phosphoric acid (H3PO4) is reacted with excess potassium hydroxide. The final mass
of K2HPO4 produced is found to be 163 g.
What is the percent yield?
Answer:
91.7%
Explanation:
The percent yield when it could be used as a buffering agent should be considered as the 91.74%.
Calculation of the percent yield:Since we know that
Number of moles = Mass in gram / Molar mass
And,
Molar mass of H3PO4 = 97.994 g/mol
So,
Number of moles of H3PO4
= 100 g / 97.994 g/mol
= 1.02 mol
Now
Molar mass of K2HPO4 = 174.2 g/mol
So,
Theoretical yield of K2HPO4 = 174.2 g/mol * 1.02 mol
= 177.684 g
So finally
Percent yield = Actual yield * 100 / Theoretical yield
= 163 g * 100 / 177.684 g
= 91.74%
hence, The percent yield when it could be used as a buffering agent should be considered as the 91.74%.
learn more about percentage here: https://brainly.com/question/14849541
Which represents the overall (net) reaction of this mechanism: step 1: H2O2 + I- → H2O + OI- step 2: H2O2 + OI- → H2O + O2 + I- Note that I- acts as a catalyst in this reaction.
A. 2H2O2 → 2H2O + O2
B. H2O2 → H2 + O2
C. H2O2 + I- → OI- + H2O
D. H2O2 + OI- → H2O + O2 + I-
Answer:
A. 2H₂O₂ → 2H₂O + O₂
Explanation:
1. H₂O₂ + I⁻ → H₂O + OI⁻2. H₂O₂ + OI⁻ → H₂O + O₂ + I⁻If we make a net sum of both reactions, we're left with:
H₂O₂ + I⁻ + H₂O₂ + OI⁻ → H₂O + OI⁻ + H₂O + O₂ + I⁻Grouping species:
2H₂O₂ + OI⁻ + I⁻ → 2H₂O + OI⁻ + O₂ + I⁻There is OI⁻ at both sides, so it is eliminated -same goes for the catalyst, I⁻-.
2H₂O₂ → 2H₂O + O₂Thus the answer is option A.
#3. How does a fever aid an immune response?
Answer:
it can tell and show what pathogen is in you as well what type and mutation so then your body can fight back and remember the genetic dna so then you will be immune in some way.
Explanation:
Question;
How does a fever aid an immune response?
Answer:
One type of immune cell jumps into the fray after body temperature rises, according to experiments in mice. A fever fights infection by helping immune cells to crawl along blood-vessel walls to attack invading microbes
3.Which of these is NOT part of the cell theory? * "
all living things are made of cells
Ocells come only from other cells
cells are the smallest living unit of an organism
O all living things have blood cells
Answer:
Cells are the smallest living unit of an organism
Answer:
all living things living things have blood cells
Explanation:
this is because robert hooke did not make this apart of the theory
what is the chemical equation for methamphetamine
Answer:
C10H15N is the chemical equation for methamphetamine
Is water made of plant cells or animal cells
•plant
•animals
•niether
Answer:
i think niether
Explanation:
How many particles are in 4g of NaCl? (1mol of NaCl = 58g) – 2 step conversion
Answer:
4.16 * 10²⁴ particles
Explanation:
1. We convert from grams to moles
4 g NaCl / 58 g of NaCl = 0.0689655172 moles
-> 0.0690 moles
2. Now we will convert from moles to particles by multiplying by avogadro's number..
0.0690 * 6.022 *10²³ = 4.15518 * 10²⁴ particles or 4.16 * 10²⁴ particles
Zn(s) + 2 HCl(aq) —> ZnCl2(aq)
+ H2(g)
If a scientist wanted to create 10L of hydrogen gas at RTP, what mass of HCl would they need to start with?
Answer:
First write the balanced equation for the reaction of HCl with Zn (NOTE: the previous answer did NOT do this and thus obtained an incorrect answer)
Zn + 2HCl ==> ZnCl2 + H2(g)
moles of H2 desired: PV = nRT
n = PV/RT = (1 atm)(10L)/(0.0821 Latm/Kmol)(298K)
n = 0.409 mole H2 desired
moles Zn needed:
0.409 moles H2 x 1 mole Zn/2 moles HCl = 0.204 moles Zn needed
mass Zn needed = 0.204 moles Zn x 65.4 g/mol = 13.4 g Zn needed (to 3 sig. figs.)
Explanation:people always get this wrong but i got you
Please help :) hope you have a good day
Have a wonderful day :) thanks for the points
b. If you have 50 grams of Molybdenum-99, how many grams will remain
after 11 days?
Answer:
6.25gm
half life is 66hrs 11 days is 24*11 then take that and divide by 66 to find out how many time it will have halved and half 50 by that many times
Explanation:
If you have 50 grams of Molybdenum-99, after 11 days, 2.7 g will remain.
Molybdenum-99 follows first-order decay.
What is first-order decay?First-order decay means that for a population of atoms (e.g. radioactive), molecules, or anything else, a constant fraction/unit time is converted to something else.
The half-life (th) of Mo-99 is 66 h.
We will find its rate constant (k) using the following expression.
k = ln2 / th = ln2 / 66 h = 0.011 h⁻¹
Next, we will convert 11 days to hours, knowing that 1 day = 24 h.
11 d × 24 h/1 d = 264 h
If we start with 50 g of Mo-99, we can calculate the remaining mass after 264 h using the following expression.
[tex][Mo] = [Mo]_0 \times e ^{-k \times t} }\\\\[Mo] = 50g \times e ^{-0.011 h^{-1} \times 264 h} } = 2.7 g[/tex]
where,
[Mo] is the final amount of Mo-99.[Mo]₀ is the initial amount of Mo-99.t is the elapsed time.If you have 50 grams of Molybdenum-99, after 11 days, 2.7 g will remain.
Learn more about first-order decay here: https://brainly.com/question/14478152
Antonio and Addie want to know if perfume fumes affect plant height. They place five identical bean plants in five identical light boxes. In four of the boxes, they place 200 milliliters (mL) of perfume at different distances from the plants, and they make observations twice a week for one month. Which choice best identifies the observation data that should be included in their data table?
Answer:
I think its C I'm sorry if I'm wrong good luck guys!
Explanation:
Which of these statements is false?
A. All matter is made up of atoms.
B. Atoms are made up of protons,
neutrons, and electrons.
C. Atoms contain chemical bonds.
D. Atoms are the smallest particles of
elements.
Answer:
C is the false one atoms contain chemical bonds
Answer:
C. Atoms contain chemical bonds.
Reason:
Atoms don't have any chemical bonds. Molecules are the particles have chemical bonds.
Hail is falling down from the sky at 50 miles per hour. Is this an example of speed,
velocity or acceleration?
Explanation:
tgggghhhhijyyhhjjjjjjjj
Hello, this is a science task and it is due today I would really appreciate it if you guys can help me answer and explain what is the difference between expansion and contraction:) I will mark brainliest!
Answer:
Expansion: increase in size Contraction: decrease in size
Explanation:
The increase in size of an object on heating is called expansion where as the decrease in size of an object on cooling is called contraction.
For the balanced equation shown below, what would be the limiting reagent if 42.3 grams
of N2O5 were reacted with 9.18 grams of H2O?
N2O5+H2O---> 2HNO3
A. HNO3
B. H20
C. N205
Answer: A. HNO3
Explanation:
(b) Why must acidic gases be treated before they are released into the atmosphere?
Answer:
because they react with other gases of atmosphere and pollute the environment
A 50.0 g sample of liquid water at 56.0°C, heats to 91.0 "C. How much energy is
involved in this change? (Heat capacity of liquid water is 4.17 J/gºC) (Q
=mcAT)
A. 7298 J B. 12038 J
C. 204480 J D. 17807 J
Answer:
A
Explanation:
using
mC∆t
50×4.17×(91-56)
=50×4.17×35
=7297.5
~ 7298 J
5 Describe how seawater forms layers
Answer:The ocean forms layers because the water has different density throughout. 2. Water with higher density sinks to the bottom while water with lower density sits on the top. ... Low-density water tends to be warmer and less saline, while high-density water is generally cooler and more saline.
Explanation:
The following are all examples of good titration reactions with the exception of _____________. (7-2) Group of answer choices Ammonia (NH3) titrated with HCl titrant. Formic acid titrated with ammonia (NH3) as a titrant. I- titrated with Ag titrant, forming a complex with a tiny Ksp. Potassium Hydrogen Phthalate (KHP) titrated with NaOH titrant. NaOH titrated with HBr titrant.
Answer:
Formic acid titrated with ammonia (NH3) as a titrant
Explanation:
We have to look at something very critical here and that is, considering whether the acid/ base is strong or weak.
For a weak acid weak base titration, there is no suitable indicator neither is there any sharp pH range because no sharp change occurs. So, for a weak acid-weak base titration, there is only a very small change in pH at the equivalence point. This makes it impractical to carry out a weak acid- weak base titration.
Formic acid is a weak acid and ammonia is a weak base. Hence, Formic acid titrated with ammonia (NH3) as a titrant is a bad titration