Answer:
4 digits that are 7,5,0,0
Explanation:
Which of the following compounds are held together by ionic bonds? Select all that apply.
O A. CaCl2
OB. CH4
OC. Naci
D. sodium bromide
E. carbon dioxide
F. FeBr3
Answer:
Explanation:
All of above except carbon dioxide
The compound that is held together by ionic bonds are CaCl₂, NaCl, sodium bromide, and FeBr₃. The correct options are A, C, D, and F.
What are ionic bonds?Ionic bonds are electrovalent bonds. These bonds are formed when two or more atoms lose electrons or gain electrons to form an ion. Ions are opposite charges that attract each other. Ionic bonds are formed in both metals and non-metals.
CaCl₂, calcium chloride, is formed between metals and non-metals. Some more examples are NaOH – Sodium Hydroxide, NaHCO₃—Sodium Hydrogen Carbonate, etc.
An example is NaCl, is sodium has 11 atomic numbers. Chloride has 6 electrons in its outermost shell. They will share electrons with each other to make the noble gas configuration.
Thus, the correct options are A. CaCl₂, C. NaCl, D, sodium bromide, and F. FeBr₃.
To learn more about ionic bonds, refer to the link:
https://brainly.com/question/977324
#SPJ2
HELP!!!! Which of the following substances is a major component in acid rain?
A) KOH
B) NH3
C) SO2
D) NaOH
Answer:
(C) SO2.
SO2 is known as sulfur dioxide.
The below information about acid rain and SO2’s involvement is from epa.gov:
“Acid rain results when sulfur dioxide (SO2) and nitrogen oxides (NOX) are emitted into the atmosphere and transported by wind and air currents. The SO2 and NOX react with water, oxygen and other chemicals to form sulfuric and nitric acids. These then mix with water and other materials before falling to the ground.”
Explanation:
hello, need ur help with this plz.
what are the factors affecting the yield and purity of an organic liquids in the laboratory and their relevance to its industrial manufacturing?
Explanation:
What factors affect purity?
A1: The key parameters that can be controlled in an emew cell are current density, flow rate, electrolyte temperature, and plating time. The current density controls the production rate, while the flow rate, temperature, and plating time can all have an impact on the product
What factors affect yield?
The yield and rate of a chemical reaction depend on conditions such as temperature and pressure. In industry, chemical engineers design processes that maximise the yield and the rate at which the product is produced. They also aim to reduce waste and energy costs at all stages of the process.
HOPE THIS HELPS YOU THANK YOU.
In the decomposition of iron(III) oxide, four moles of iron are produced for every two
moles of iron(III) oxide decomposed. If four moles of iron(III) oxide decompose, how
many moles of iron are produced?
Answer: 8 moles of Fe
Explanation:
If 2 moles oxide give 4 moles Fe, so 4 moles oxide gives 8
The diagram below shows the different phase transitions that occur in matter. Three bars are shown labeled Solid, Liquid, and Gas. They are connected by arrows labeled 1 to 6. Arrow 1 points from liquid to gas; arrow 2 from solid to liquid, arrow 3 from solid to gas, arrow 4 from gas to liquid, arrow 5 from liquid to solid, and arrow 6 from gas to solid. Which arrow would most likely represent the phase change that involves the same amount of energy as arrow 1? 2 3 4 5
Answer:
4
Explanation:
Got it right edge 2021
Answer:
4 or C
Explanation:
i took the quiz
3. What is the molar mass of O2? Round to nearest whole number.
8
O
16
32
64
Answer:
Molar mass of O is = 16
Molar mass of O2 = 32
ANSWER ASAP!
The sun provides what almost everything on Earth needs to go—energy, or heat. Heat causes liquid and frozen water to evaporate into water vapor gas, which rises high in the sky to form clouds... clouds that move over the globe and drop rain and snow. This process is a large part of the water cycle.
Answer:
whats the question so i can answer?
Give the product expected when the following alcohol reacts with pyridinium chlorochromate (PCC). (Assume that PCC is present in excess.) The starting material is a 4 carbon ring where carbon 1 is bonded to O H and C H 3. Carbon 3 is bonded to C H 2 C H 2 O H. This reacts with P C C in C H 2 C L 2 to give the product. Draw the product.
Answer:
Kindly check the explanation section.
Explanation:
Based on the description of the reacting -OH group containing Compound, the drawing of the chemical compound is given in the attached picture.
So, without mincing words let's dive straight into the solution to the question.
The reaction between the OH containing compound and PCC is an oxidation reaction.
Looking at the carbon number 1 which the first OH group and CH3 are attached to. Oxidation can not occur here as tertiary alcohol can not be oxidize.
Hence, the second OH will be oxidized into a carbonyl group, C = O. Kindly note that when alcohol oxidizes it turns into an aldehyde.
The equation for the reaction is also given the the attached picture.
explain how liquid can enter the gas phase without reaching its boiling point
What is the number of nitrogen molecules that reacted with excess hydrogen to make 2x10^10 molecules of ammonia
According to stoichiometry and mole concept,1×10¹⁰ molecules reacted with excess hydrogen to make 2 x 10¹⁰ molecules of ammonia.
What is stoichiometry?Stoichiometry is the determination of proportions of elements or compounds in a chemical reaction. The related relations are based on law of conservation of mass and law of combining weights and volumes.
Stoichiometry is used in quantitative analysis for measuring concentrations of substances present in the sample.It is important while balancing chemical equations.
In the given example, as 1 molecule of nitrogen produces 2 molecules of ammonia
∴2 x 10¹⁰ molecules of ammonia will be produced when 2 x 10¹⁰×1/2=1×10¹⁰ molecules .
Thus, 1×10¹⁰ molecules reacted with excess hydrogen to make 2 x 10¹⁰ molecules of ammonia.
Learn more about stoichiometry,here:
https://brainly.com/question/9743981
#SPJ6
pls help fast answer
Answer:
freezing
Explanation:
when objects are in liquid for, molecules are not moving as rapidly as when an object is in solid form
Answer:
evaporation :)
Explanation:
Copy and complete these equations plz I’ll give brainliest
Answer:
MgSO4 + 6H2O ----> MgSO4.6H2O
2C + O2 -----> 2CO
2CuO + C ------> 2Cu + CO2
C2H6 -----> C2H4 + H2
ZnO + C -----> Zn + CO
NiCO3 ------> NiO + CO2
CO2 + 2H2 ------> CH4 +O2
NaOH + HNO3 -----> NaNO3 + H2O
C2H6 --------> C2H4 + H2
Explanation:
how many atoms are in 1.7 mols of CHF3
Given :
Number of moles of CHF₃ is 1.7 .
Solution :
We know, 1 mole of any complex contains 6.022 × 10²³ molecules.
Let, 1.7 moles of CHF₃ contains n numbers of molecules.
So, n = 1.7 × 6.022 × 10²³ molecules
n = 10.2374 × 10²³ molecules
n = 1.0237 × 10²³ molecules
Hence, this is the required solution.
What is the normal pH range of a Base?
Answer:
7.35 - 7.45
Explanation:
The pH scale ranges from 0 (strongly acidic) to 14 (strongly basic or alkaline). A pH of 7.0, in the middle of this scale, is neutral. Blood is normally slightly basic, with a normal pH range of about 7.35 to 7.45. Usually, the body maintains the pH of blood close to 7.40.
Hope this helps
Answer:
The normal pH range if a base is more than 7
Explanation:
Basideally the pH range goes from 0-14 in which
Acidic range is :0-7
Neutral :7
Base : 7 - 14
Composition of Dry AirGas Percent by Volume (%)Nitrogen (N2) 78Oxygen (O2) 21Argon (Ar) 0.9Carbon dioxide (CO2) 0.04 What volume of air contains 12.3 g of oxygen gas at 273 K and 1.00 atm
Answer:
40.95 L
Explanation:
We'll begin by calculating the number of mole in 12.3 g of O₂. This can be obtained as follow:
Mass of O₂ = 12.3 g
Molar mass of O₂ = 16 × 2 = 32 g/mol
Mole of O₂ =?
Mole = mass / Molar mass
Mole of O₂ = 12.3 / 32
Mole of O₂ = 0.384 mole
Next, we shall determine the volume occupied by 0.384 mole of O₂. This can be obtained as follow:
Number of mole (n) of O₂ = 0.384 mole
Pressure (P) = 1 atm
Temperature (T) = 273 K
Gas constant (R) = 0.0821 atm.L/Kmol
Volume (V) of O₂ =?
PV = nRT
1 × V = 0.384 × 0.0821 × 273
V = 0.384 × 0.0821 × 273
V = 8.6 L
Thus, the volume of O₂ is 8.6 L
Finally, we shall determine the volume of air that contains 8.6 L of O₂. This can be obtained as follow:
Volume of O₂ = 8.6 L
Percentage of O₂ in air = 21%
Volume of air =?
Percentage of O₂ = Vol of O₂ / Vol of air × 100
21% = 8.6 / Vol of air
21 / 100 = 8.6 / Vol of air
Cross multiply
21 × Vol of air = 100 × 8.6
21 × Vol of air = 860
Divide both side by 21
Volume of air = 860 / 21
Volume of air = 40.95 L
Therefore, the volume of air is 40.95 L.
solve this .......,..,.,.,..,.,,.,.,.,.,.,.,.,.,..,.,.,.,.z.,.,.,.,..,.,.,.,.,,.,.,.,
Answer: Molecular formula of copper (II) bromide is [tex]CuBr_2[/tex]
Molecular formula of aluminium (III) nitrate is [tex]Al(NO_3)_3[/tex]
Molecular formula of calcium (II) phosphate is [tex]Ca_3(PO_4)_2[/tex]
Molecular formula of iron (III) sulphide is [tex]Fe_2S_3[/tex]
Molecular formula of mercury (II) chloride is [tex]HgCl_2[/tex]
Molecular formula of magnesium (II) acetate is [tex](CH_3COO)_2Mg[/tex]
Explanation:
The name of the ionic compounds is written by writing the name of the cation first followed by its oxidation state in round brackets and then the name of the anion is written without any suffix. Thus the cation is written first followed by the oxidation state and then the anion.
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral compound.
Molecular formula of copper (II) bromide is [tex]CuBr_2[/tex]
Molecular formula of aluminium (III) nitrate is [tex]Al(NO_3)_3[/tex]
Molecular formula of calcium (II) phosphate is [tex]Ca_3(PO_4)_2[/tex]
Molecular formula of iron (III) sulphide is [tex]Fe_2S_3[/tex]
Molecular formula of mercury (II) chloride is [tex]HgCl_2[/tex]
Molecular formula of magnesium (II) acetate is [tex](CH_3COO)_2Mg[/tex]
What is the equilibrium constant for the reaction
SO2(g) + NO2(9) = SO3(g) + NO(g)?
А. Keq: [S03)(S02]
[NO][NO2]
B. Keq: [SO2)(NO2]
[SO3)(NO]
C. Keq: [SO3)3(NO]
[SO2)2(NO2)2
D. Keq: [SO3)(NO]
[SO2]NO2]
Answer:
D. Keq: [SO3][NO] /[SO2]NO2]
Explanation:
Hello!
In this case, according to the process to set up equilibrium expressions for chemical reactions at equilibrium, we realize we need to write up the concentration of products on top and that of reactants on bottom; thus, for there chemical reaction herein specified, we obtain:
[tex]Keq=\frac{[SO_3][NO]}{[SO_2][NO_2]}[/tex]
Thereby, the answer is D. Keq: [SO3][NO] /[SO2]NO2].
Best regards!
Answer:
D
Explanation:
3. Beta decay is when a proton and ______ are emitted from a neutron.
a. an electron
b. another proton
c. a neutron
d. positron
Answer:
d. positron
that's the answer brainly tells me I need to write at least 20 characters and that's d u m b.
How many moles of SO3 are produced when 1.5 mol of O2 react with SO2?
Answer:
3 mole O2
Explanation:
Need balanced equation first: O2 + 2SO2 --> 2SO3
assuming SO2 is in excess,
1.5 mol O2 (2moles SO3/1mole O2) = 3 mole O2
A sample of metal has a mass of 16.12 g, and a volume of 4.87 mL. What is the density of this metal?
Answer:
3.31 g/cm³
Explanation:
1000cm³ = 1L
4.87mL = 4.87 × 10^-3 × 1000 = 4.87 cm³
density = mass/volume = 16.12/4.87 = 3.31 g/cm³
Have you ever eaten a coin?
Answer:
yes
Explanation:
bc i wanted to know how they taste btw they taste like metal not good 5/10
might try again but not recommended
my favorite one is a quarter probably
Relate the kinetic theory of matter to the states of matter.
Particles of matter are continuously moving, so they possess kinetic energy. As temperature rise the kinetic energy of atoms increase and particles move faster. So, they overcome the bonding force that holds them together. So, they change their state.
7. Consider an element with 2
electrons on the 1st shell and 4
electrons on the 2nd shell. What
element is likely to have that Bohr
model?
Answer:
Carbon (C)
Explanation:
The electron configuration of Carbon is 2-4.
100 g of milk has the following composition:
4.7 g of carbohydrates, 5 g of minerals, 3.8 g of proteins, and 3.3 g of lipids.
1. Calculate the energy value in Kcal of 100 g of milk.
2. Deduce this energy in Kj.
3. Calculate the energy value in 225 g of milk.
Given:
lg of carbohydrate provides 3.75 Kcal.
ig of lipid provides 9 Kcal.
lg of protein provide 4 Kcal.
Answer:
Explanation:
SADOPOAKAWAASDASWDWSDWAA
there is no such thing as a universal solvent- explain? I’ll mark brainiest!!!
Answer:
A true universal solvent does not exist. Although water is considered to be a the "universal solvent" it only dissolves other polar molecules. It does not dissolve nonpolar molecules, including organic compounds such as fats and oils. It is only called so because it can dissolve many more than other liquids.
How did Dmitri Mendeleev arrange the periodic law?
a. Each set of elements was arranged in special columns based on their mass.
b. Each set of elements was arranged in special columns based on their diameter.
c. Each set of elements was arranged in special periods based on their qualities.
d. Each set of elements was arranged in alphabetical order.
Answer:
a. Each set of elements was arranged in special coloumns based on their mass.
Please help, and if you could also give me a step by step that would be awesome!!
Answer:
4.4 g
Explanation:
Step 1: Write the balanced equation
Cu + 4 HNO₃ ⇒ Cu(NO₃)₂ + 2 NO₂ + 2 H₂O
Step 2: Calculate the moles corresponding to 3.2 L of NO₂ at STP
At standard temperature and pressure, 1 mole of NO₂ occupies 22.4 L.
3.2 L × 1 mol/22.4 L = 0.14 mol
Step 3: Calculate the moles of Cu needed to produce 0.14 moles of NO₂
The molar ratio of Cu to NO₂ is 1:2. The moles of Cu needed are 1/2 × 0.14 mol = 0.070 mol.
Step 4: Calculate the mass corresponding to 0.070 moles of Cu
The molar mass of Cu is 63.55 g/mol.
0.070 mol × 63.55 g/mol = 4.4 g
The water vapor that condenses low to the ground and becomes visible is known as ___________.
There is a 2 percent defect rate at a specific point in a production process. If an inspector is placed at this point, all the defects can be detected and eliminated. The inspector would cost $10 per hour and could inspect units in the process at the current production rate of 48 per hour.
If no inspector is hired and defects are allowed to pass this point, there is a cost of $11 per defective unit to correct the defects later on.
Assume that the line will operate at the same rate (i.e., the current production rate) regardless of whether the inspector is hired or not.
a. If an inspector is hired, what will be the inspection cost per unit? (Round your answer to 3 decimal places.)
Inspection cost per unit _____________$
b. If an inspector is not hired, what will be the defective cost per unit? (Round your answer to 3 decimal places.)
Defective cost per unit _____________$
c. Should an inspector be hired based on costs alone?
Answer:
A) $0.208 per unit
B) $0.220 per unit
C) An inspector should be hired
Explanation:
percentage of defect rate = 2% = 0.02
cost of inspector = $10 per hour
production rate = 48 per hour
cost of not hiring an inspector = $11
A) Determine the inspection cost per unit if an inspector is hired
= cost of inspector / production rate
= 10 / 48 = $0.208 per unit
B) Determine the defective cost per unit if an Inspector is not hired
= cost of not hiring an inspector * percentage of defect rate
= 11 * 0.02
= $0.220 per unit
C) Inspection cost < defective cost i.e. $0.208 < $0.220 hence an inspector should be hired
I would like to get some examples of Newtons 1st,2nd, and 3rd Law
Answer:
Explanation:
Newtons 1st law:
If you slide a hockey puck on ice, eventually it will stop, because of friction on the ice. It might also stop if a hockey player places their stick in front of it.
Newton's 2nd law:
If the mass of an object is 20 kg and it's acceleration is 5 m/s, the force acting upon it is (m*a or 20*5) 100 N.
Another example that proves that force is dependent upon mass is that if you were to move a car and a truck (that were both previously stationary) at the same speed, the car would take less force/effort to move than the truck.
Newton's 3rd law:
If a book on a table, the table is exerting a force on it that is equal and opposite to the force of gravity.
If two soccer balls of the same mass collide, one moving and one stationary, then they would both apply an equal and opposite force onto each other, causing the moving ball to stop and the previously stationary ball to move at the speed of the previously moving ball.