The number of moles of [tex]Fe^{2+}[/tex] in the [tex]2.0g[/tex] sample of [tex]FeCl_{2}[/tex] is [tex]0.0157[/tex] moles.
The following points should be noted about the number of moles:
The number of moles of any substance can be calculated using the mass and molar mass of the substance. [tex]n = \frac{mass}{molarmass}[/tex], where n is the number of moles.Mass of the sample given as [tex]2.0g[/tex] and the molar mass of the sample as [tex]126.75g/mol[/tex].
Therefore, the number of moles of [tex]Fe^{2+}[/tex]is obtained by dividing the mass by the molar mass.
Hence the number of moles is obtained as [tex]0.0175[/tex] moles.
Learn more about the number of moles here:
https://brainly.in/question/22534630
Which event would most likely lead to a thunderstorm g i v i n g b r a i n l e s i t HELP
Answer:
A
Explanation:
A is the correct answer once the warm, moist air moves into the cold, dry air, the thunderstorm will start to develop and gradually get larger.
1. (solution/solvent/solute) Use the correct word in the following sentence:
dissolved in
makes up a
2 What is the difference between a strong electrolyte and a weak electrolyte?
3. The solubility of sodium chlorate in water is 52g/100g H20. If 0.46 moles of sodium
chlorate are dissolved in 60g of water, is this solution
saturated/supersaturated/unsaturated?
Answer:
1. solute dissolved in solvent makes up a solution.
Which pair of elements will form a covalent bond? A. Aluminium and Chlorine B. Carbon and Sulfur C. Lithium and Oxygen D. Potassium and Chlorine
Explanation:
Aluminum and chlorine form covalent bond.
Therefore,
Option A is correct✔
If 35.0 g of aluminum changes temperature by 84.0℃, how much heat was absorbed? specific heat of Al = 0.910 J/g℃
40567⁰ kkkkkkkkkkkkkkkkkkkkkkmeow
Explanation:
cuz I got a 100
A typical home instant pot has an internal volume of 6.5 Liters. If the steam inside an instant pot with an internal pressure of 191.0 kPa and a temperature of 750.0 K was released into the atmosphere at 101.3 kPa and 298K, what volume with the steam occupy in the atmosphere?
punnet squares, is this right? Lol
Explanation:
yup,it is correct:-)
Answer:
the genotype would be 50% Rr and 50% rr
the phenotypes would be 50% Red flower (Rr) and 50% white flower (rr)
Explanation:
Spheres of Earth Assignment Active Analyzing Sphere Interactions Explain how Earth's spheres may be affected by the droughts brought on by El Niño. Sometimes, the surface of the Pacific Ocean warms up, causing changes in the weather in some areas. This phenomenon is called El Niño. El Niño causes the amount of rainfall in some parts of the United States and South America to increase. It also causes droughts to occur in Southeast Asia and Australia. Droughts occur when an area receives less rain than it normally does over a certain period.
help me on this question please. it is 7th grade science
10
The reaction in which ammonia is formed is N2(g) + 3H2(g) + 2NH3(). At equilibrium, a
1-L flask contains 0.15 mol H. 0.25 mol N, and 0.10 mol NH. Calculate K., for the reaction.
11.85
23.8
25.0
16
The equilibrium constant (K) : 11.85
Further explanationGiven
Reaction
N₂(g) + 3H₂(g) ⇒ 2NH₃(g)
Required
K(equilibrium constant)
Solution
The equilibrium constant (K) is the value of the concentration product in the equilibrium
The equilibrium constant based on concentration (K) in a reaction
pA + qB -----> mC + nD
[tex]\tt K=\dfrac{[C]^m[D]^n}{[A]^p[B]^q}[/tex]
For the reaction above :
[tex]\tt K=\dfrac{[NH_3]^2}{[N_2][H_2]^3}\\\\K=\dfrac{0.1^2}{0.25\times 0.15^3}\\\\K=11.85[/tex]
Condensation is a phase change from?
Answer:
gas to liquid
Explanation:
think of water vapor condensing on glass when you breathe on it for a while.
Which of the following are examples of QUALITATIVE data? (seiect all that apply)
None these is qualitative data
The sound of a person's voice
The weight of person
The hair color of a person
The body temperature of a person
Answer:
The hair color of a person
Explanation:
The correct answer would be the hair color of a person.
Qualitative data are data that cannot be measured with any instrument but can only be used to characterize. Unlike quantitative data, these kinds of data can only be observed and recorded but cannot be assigned numerical values, except if coded.
The sound of a person's voice can be quantitative on one hand and qualitative on the other. The intensity of a sound can be measured using a decibel meter and quantitatively assigned a figure, whereas, the quality of the sound can only be characterized and not measured.
Both the weight and the body temperature of a person can be measured using a weighing balance and a thermometer respectively and hence, are considered to be quantitative data when collected.
The color of the hair of a person cannot be measured but can only be observed and characterized. Hence, hair color data constitute qualitative data.
Answer:
hair color
Explanation:
Which phrase describes one type of freshwater wetland?
2
acidic areas found in northern climates
reservoirs created by dams at the end of rivers
areas of high elevation that feed into river systems
small streams that flow into larger streams and wetlands
Answer:
The correct answer is D
Explanation:
Wetlands are environments that are either submerged under water or are frequently wet. Marshes, swamps, bogs, and fens are examples of freshwater wetlands. Here small streams flow into larger streams and wetlands. The correct option is D.
Ecosystems in freshwater wetlands are impacted by transient or ongoing flooding. They are essential habitats for fauna (including migratory species), play a significant role in the regulation of water flow and water quality to entire catchments, and offer shelter for fauna during droughts.
In tropical and subtropical areas, mangrove swamps are coastal wetlands. In brackish to saline tidal waters, they are distinguished by halophytic (salt-loving) trees, shrubs, and other plants.
Thus the correct option is D.
To know more about wetlands, visit;
https://brainly.com/question/11438518
#SPJ6
A saturated hydrocarbon having molecular formula CnH2n+2 diffuses through a porous membrane twice as fast as sulphur dioxide. Calculate the volume occupied by the hydrocarbon at27°C and 2atm ?
Help me fast !
Answer:
12.3 L
Explanation:
Now we have that the rate of diffusion of the saturated hydrocarbon is R1
Rate of diffusion of sulphur dioxide is R2
Molar mass of hydrocarbon is M1
Molar mass of sulphur dioxide is 64 gmol-1
From Graham's law;
R1/R2 = √64/M1
2/1 =√64/M1
(2/1)^2 = (√64/M1)^2
4/1 = 64/M1
4M1 =64
M1 = 16
To obtain the number of moles of the gas;
(n*12) + (2n + 2) 1 = 16
12n + 2n + 2 = 16
14n + 2 = 16
14n = 16 - 2
n = 14/14
n = 1
Hence the hydrocarbon is CH4
Volume occupied by CH4 at STP = 22.4 L
Hence;
P1 = 1 atm
T1 = 273 K
V1 = 22.4 L
T2 = 300 K
P2 = 2 atm
V2 = ?
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 1 * 22.4 * 300/2 * 273
V2 = 12.3 L
The volume occupied by the hydrocarbon at 27 °C and 2 atm is 12.31 L
Let the hydrocarbon be initially at standard temperature and pressure (STP)
Thus, we can obtain the new volume of the hydrocarbon by using the combined gas equation as illustrated below:
Initial volume (V₁) = STP = 22.4 L Initial pressure (P₁) = STP = 1 atmInitial temperature (T₁) = STP = 273 KFinal temperature (T₂) = 27 °C = 27 + 273 = 300 KFinal pressure (P₂) = 2 atmFinal volume (V₂) =?P₁V₁ / T₁ = P₂V₂ / T₂
(1 × 22.4) / 273 = (2 × V₂) / 300
22.4 / 273 = (2 × V₂) / 300
Cross multiply
273 × 2 × V₂ = 22.4 × 300
546 × V₂ = 6720
Divide both side by 546
V₂ = 6720 / 546
V₂ = 12.31 L
Thus, the volume occupied by the hydrocarbon at 27 °C and 2 atm is 12.31 L
Learn more about gas laws:
https://brainly.com/question/25967416
In the reaction C + O2 → CO2, 18 g of carbon react with oxygen to produce 72 g of carbon dioxide. What mass of oxygen would be needed in the reaction?
18 g
54 g
72 g
90 g
Answer:
54g of O2 reacted in the reaction
Answer:
54g
Explanation:
Which of these sentences probably comes from a work of classic literature?) PLEASE HELP ILL GIVE YOU BRAINLEIST!
A. The greedy man was harsh as winter, and had never done a generous deed in his long life; he was a hermit.
B. The man who refused to share with those in need had never felt the warmth that comes from giving.
C. The most selfish man in town was one who lived alone and never had visitors of any sort, except maybe lawyers.
D. The miser was hard and sharp as flint, from which no steel had ever struck out generous fire; he was as solitary as an oyster.
The sentences that probably comes from a work of classic literature are:
The most selfish man in town was one who lived alone and never had visitors of any sort, except maybe lawyers. The miser was hard and sharp as flint, from which no steel had ever struck out generous fire; he was as solitary as an oyster.What types of books are regarded as classics?The great literary works of Greek, Roman, and other prehistoric civilizations are referred to as classical literature. Classical literature includes the writings of Homer, Ovid, and Sophocles. The phrase isn't just applicable to books. It can also incorporate other types of writing, such as epic, lyric, tragedy, comedy, and pastoral.
Classical literature enables us to take a profound plunge into the lives, worldviews, and mindsets of individuals we have never met, to travel to unfamiliar settings, and to comprehend eras we will never be able to experience ourselves.
Therefore, option C and D are correct.
Learn more about literature at:
https://brainly.com/question/20848481
#SPJ1
you have a friend who is using a recipe for flat from american cookbook you notice that he set your over temperature at 175F° what you advise him to do?
Answer:
I will give them advice, that do the power of flame low....
Explanation:
thanks.
4.which is a product of the process shown above?
a. carbon dioxide
b. sugar
c. sunlight
d. water
5.where does the energy that drives this process come from?
a. oxygen
b. sugar
c. sunlight
d. water
Answer:
4. b 5.C
Explanation:
Photosynthesis makes sugar for plants and sunlight is the energy used to convert CO2 and water into glucose
The product of the process of photosynthesis is sugar and the energy to dive the process of photosynthesis comes from sunlight.
What is photosynthesis?Photosynthesis is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy through the process of cellular respiration.
Some of the energy which is converted is stored in molecules of carbohydrates like sugar and starches which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.
The process begins with proteins absorbing light energy which are called reaction centers and contain a green pigment which is called chlorophyll . In plants ,these pigments are present inside organelles called chloroplasts while in bacteria they are present in plasma membrane.
Learn more about photosynthesis,here:
https://brainly.com/question/26494694
#SPJ2
17. What is the correct empirical formula for H4C408?
A
H2C204
B HCO2
C
HCO4
D
H2C202
Answer:
B
Explanation:
by simlfying it you get HCO2
Molecular orbital diagram for Fe.
ANSWER;
1s22s22p63s23p63d64s2
EXPLANATION;
Molecular orbital diagram for Fe.
In writing the electron configuration for Iron the first two electrons will go in the 1s orbital. Since 1s can only hold two electrons the next 2 electrons for Iron go in the 2s orbital. The next six electrons will go in the 2p orbital. The p orbital can hold up to six electrons. We'll put six in the 2p orbital and then put the next two electrons in the 3s. Since the 3s if now full we'll move to the 3p where we'll place the next six electrons. We now shift to the 4s orbital where we place the remaining two electrons. After the 4s is full we put the remaining six electrons in the 3d orbital and end with 3d6.
Therefore the Iron electron configuration will be 1s22s22p63s23p64s23d6.
Note that when writing the electron configuration for an atom like Fe, the 3d is usually written before the 4s. Both of the configurations have the correct numbers of electrons in each orbital, it is just a matter of how the electronic configuration notation is written
Therefore we have 1s22s22p63s23p63d64s2
punnet squares, help how do I do this
Explanation:
Im not sure what the other trait is so I couldn't do phenotype. I hope this still helps though
which event would most likely lead to a thunderstorm giving brainliest
Answer:
A
Explanation:
Took at test on this and my teacher said it was right, hopefully I remembered right, also I answered ur other question like this I think lol
How is the kinetic energy of the particles of a substance affected during a phase change?
A.) Kinetic energy increases during exothermic changes and decreases during endothermic changes.
B.) Kinetic energy decreases during exothermic changes and increases during endothermic changes.
C.) Kinetic energy does not change, but the potential energy does.
D.) Kinetic energy changes in the opposite way that the potential energy changes.
Answer: A. Kinetic energy increases during exothermic changes and decreases during endothermic changes
Explanation: During an exothermic change potential energy is converted to kinetic energy. I hope this is correct. :)
Answer:
C
Explanation:
1) How many moles are in 4.0x10^24 atoms?
Answer:
6.64 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
[tex]n = \frac{4 \times {10}^{24} }{6.02 \times {10}^{23} } \\ = 6.644518...[/tex]
We have the final answer as
6.64 molesHope this helps you
Atoms of the same element can have different properties. ( true or false )
Answer:
Atoms of the same element have the same chemical properties. The only differences between atoms of the same element are the number of neutrons in the nucleus and the atomic weight of each isotope. false
Answer:
False
Explanation:
Different elements can have different properties, but not atoms of the same element
Someone plz help me write notes (images attached)
Answer:
I'm not going to give you notes but I'm going to give you a tip for notes take what you think is the most important thing about the text and basically paraphrase it into your own words if that helps
The balanced equation for the syntheis of Iron (I) oxide is below:
If 5.4 moles of Fe react with 4.7 moles of O2, what is the maximum amount of Fe2O3 (in moles) that can be produced? What is the limiting reactant?
a
3.1 moles of Fe2O3 is the maximum amount that can be produced. Oxygen is the limiting reactant.
b
2.7 moles of Fe2O3 is the maximum amount that can be produced. Iron is the limiting reactant.
c
7.1 moles of Fe2O3 is the maximum amount that can be produced. Oxygen is the limiting reactant.
d
10.8 moles of Fe2O3 is the maximum amount that can be produced. Iron is the limiting reactant.
Answer:
Option B. 2.7 moles of Fe2O3 is the maximum amount that can be produced. Iron is the limiting reactant.
Explanation:
The balanced equation for the reaction is given below:
4Fe + 3O2 —> 2Fe2O3
From the balanced equation above,
4 moles of Fe reacted with 3 moles of O2 to produce 2 moles of Fe2O3.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
4 moles of Fe reacted with 3 moles of O2.
Therefore, 5.4 moles of Fe will react with = (5.4 × 3)/4 = 4.05 moles of O2.
Thus, we can see that only 4.05 moles out of 4.7 moles of O2 given is needed to react completely with 5.4 moles Fe. Therefore, Fe is the limiting reactant and O2 is the excess reactant.
Finally, we shall determine the maximum amount of Fe2O3 produced from the reaction.
In this case, the limiting reactant will be use because it will produce the maximum amount of Fe2O3 as all of it is used up in the reaction.
The limiting reactant is Fe and the maximum amount of Fe2O3 produced can be obtained as follow:
From the balanced equation above,
4 moles of Fe reacted to produce 2 moles of Fe2O3.
Therefore, 5.4 moles of Fe will react to produce = (5.4 × 2)/4 = 2.7 moles of Fe2O3.
Summary:
Limiting reactant => iron (Fe)
Maximum amount of Fe2O3 produce = 2.7 moles
can someone help me with my chemistry on my page/account?
Answer:
Yes
Explanation:
Text me on here
fill in the blank please
amino acids as _____ are to words
Answer:
Sentences are where there is a beginning and an end of a section of a paragraph. Letters are individual parts of sentences.
The answer that would make the MOST sense would be SENTENCES
why is it important to prepare for disaster? what are the things you need to prepare?
Explanation:
The reason why it is important to prepare for an disaster is because Being prepared can reduce fear, anxiety, and losses that accompany disasters. People also can reduce the impact of disasters (flood proofing, elevating a home or moving a home out of one's harm's way, and securing items that could shake loose in an earthquake) and sometimes avoid the danger completely.
The things you need to prepare for an disaster is
WaterFoodClothing Money if neededFlash lightBatteriesFirst aid kitYou can even need an radio( to keep updated).about how much of the visible side of the moon is lit up during a full moon?
A. Three fourths
B. One fourth
C. None of it
D. All of it
Answer:
D
Explanation:
i learned this in elementary
How many moles are in 3.4 x 10-7 grams of Silicon dioxide, SiO2?
Answer:
Number of moles = 0.057 × 10⁻⁷ mol
Explanation:
Given data:
Mass of SiO₂ = 3.4 × 10⁻⁷ g
Number of moles = ?
Solution:
Number of moles = mass/molar mass
Molar mass of SiO₂ = 60 g/mol
by putting values,
Number of moles = 3.4 × 10⁻⁷ g / 60 g/mol
Number of moles = 0.057 × 10⁻⁷ mol