Answer:
30.0 mol CO₂
Explanation:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
To answer this problem we need to convert moles of C₃H₈ into moles of CO₂: We'll do that by using the stoichiometric coefficients, using a conversion factor that has C₃H₈ moles in the denominator and CO₂ moles in the numerator:
10.0 mol C₃H₈ * [tex]\frac{3molCO_2}{1molC_3H_8}[/tex] = 30.0 mol CO₂
For the titration of 50.0 mL of .020M HI with 0.015 M of NaOH, graph pH versus milliliters of base added from 0-100 mL. How many milliliters of NaOH are added at the equivalence point?
Answer:
[tex]V_{base}=66.7mL[/tex]
Explanation:
Hello there!
In this case, since the neutralization reaction between HI and NaOH is:
[tex]NaOH+HI\rightarrow NaI+H_2O[/tex]
Thus, as there is a 1:1 mole ratio of base to acid, it is possible to use the following mole equivalence:
[tex]n_{base}=n_{acid}\\\\M_{base}V_{base}=M_{acid}V_{acid}[/tex]
Thus, by solving for the volume of base, we obtain:
[tex]V_{base}=\frac{M_{acid}V_{acid}}{M_{base}}[/tex]
Therefore, we plug in the given data to obtain:
[tex]V_{base}=\frac{0.020M*50.0mL}{0.015M}\\\\ V_{base}=66.7mL[/tex]
Best regards!
How many atoms are in 294 g of copper?
Answer
2.1 x 10 ^23
fdxkjns9fhnuvypdsssssssssz89999qewv
Which is not synthetic polymer?
a) Teflon
b) PVC
c) Chitin
What is the concentration of chlorine in ppm, in a 2.0L sample of pool water that contains 5.2mg of chlorine. How do I do this problem
Answer: 2.6 ppm
Explanation: ppm is parts per million, also 1:1000 000.
It means 1 mg in 1000 000 mg is same as 1 mg in 1000 g
Assume 2.0 litres weighs 2.0 kg = 2000 g
In one litre there is 2.6 mg Cl. You get a proportion 2.6 mg :1000 g
The concentration of chlorine is 2.6 ppm.
What is concentration?Concentration can be calculated in terms of Parts per million, or ppm, that is a measurement of dissolved solids in solution expressed as a ratio of the count of parts of solids/solute to one million parts of total volume.
The concentration can be calculated by using the formula:
C = m / v
where, C is concentration, m is mass and v is volume.
Calculation of concentration is shown as:
By using the formula, C = m / v
Put the values of m = 5.2 mg and v = 2 L in concentration formula.
C = 5.2 mg / 2 L
C = 2.6 ppm
Therefore, the concentration of solution will be 2.6 ppm.
To know more about concentration click here.
https://brainly.com/question/10725862.
#SPJ2
understanding coefficients
Answer:
Mg-9
N-6
C-2
O-4
Ca-9
P-6
O-24
Explanation:
What are the three major Eras from 600 million years ago to today
Answer:
he Paleozoic, Mesozoic, and Cenozoic.
Explanation:
What is the boiling point of 1 cup of water with 6 tablespoons of salt?
Explanation:
best answer i could say was this
Read the question and help me with the answer please
if a runner decreases his velocity from +20 m/s to +10 m/s what is his average acceleration
Answer:
f a runner decreases his velocity from +20 m/s to +10 m/s, with average acceleration is -5m/s².
Explanation:
What is a way of moving electricity along a path called? *
battery
circuit
static electricity
electrons
Compare and contrast the behavior of the food coloring and the floating pieces of paper before and after adding heat to the system. What caused the changes you observed
Answer:
the answer is c
Explanation:
Answer:
Im doing this rn :0, look at explanation ill try to help
Use different words
Have a great day!
pls give brainliest and hit the heart if this helped :3
Explanation:
The changes I observed are that when you do not use hot water, the food coloring stays at the bottom and doesn't spread to the top, but when I do use food coloring, it spreads everywhere in the water. I don't know what caused the changes I observed, but I think its because heating food coloring does something to it to make it spread, maybe hotter liquids spread faster?
The asthenosphere flows because of
Every day Sam goes to Dunkin' Donuts and orders a medium iced Coffee with four sugars OR he orders a hot
coffee with four sugars.
He notices that the iced coffee is never as sweet as the hot coffee. Why is this? Use complete sentences and
unit vocabulary to explain.
Which animal is a vertebrate
Fish
crab
shrimp
octopus
Answer:
fish
Explanation:
vertebrate is an animal with a spinal cord surrounded by cartilage or bone ,so example of a vertebrate is fish
2. Germ cells are found in the
A. heart
B. lungs
C. muscles
D. ovaries
Answer:
D- located in ovaries...
I neeeedddd hhheeelppppppllsssss
Answer:
I believe that it is the 2nd option.
Explanation:
My reasonings are because C4H10O has 7 isomers. In which 4 are alcohol and the other 3 are ether.
The first option is ethers, specifically ethoxyethane.
The third option is ethers, specifically 1-methoxypropane.
The fourth option is an alcohol, specifically 1- butanol.
Therefore, leads us to the 2nd option that it is NOT an isomer of C4H10O
What differences would you expect if, at the same time, you place yellow and blue food coloring in both HOT and COLD water?
Answer:
The food coloring in the hot water will most likely spread faster than the one in the cold in which can result in it turning green rather than the coloring in the cold.
Explanation:
The reaction 2KClO3(s) --> 2KCl(s) + 3O2(g) is a(n)
Group of answer choices
combustion reaction.
ionic reaction.
synthesis reaction.
decomposition reaction.
Answer:
decomposition reaction.
Explanation:
It is a decomposition reaction as potassium chlorate compound breaks to form potassium chloride and oxygen. This reaction requires heat as source of energy to break down the compound so it is endothermic in nature.
Dogs are derived from wolves. Today, dogs are very diverse, varying in size from very small to very large. What led to this variety
1 - selective breeding
2- cloning
3- Genetic Engineering
4- Natural Selection
Answer:
1
Explanation:
i think but yes
Dogs are derived from wolves. Dogs are very diverse, varying in size from very small to very large. The variety is because of selective breeding. Hence option 1 is correct.
What is selective breeding?Selective breeding is defined as the method by which people pick which male and female animals or plants would reproduce sexually and create offspring together in order to selectively acquire specific phenotypic features. The goal of selective breeding is to produce cattle with desirable features that are strongly heritable and can thus be passed down from generation to generation.
Despite the fact that all dogs are descended from wolves, people have significantly changed the appearance of dogs through the use of artificial selection. Dogs have been bred for various desirable traits for ages, resulting in a vast variety of canines, from the little Chihuahua to the enormous Great Dane.
Thus, dogs are derived from wolves. Dogs are very diverse, varying in size from very small to very large. The variety is because of selective breeding. Hence option 1 is correct.
To learn more about selective breeding, refer to the link below:
https://brainly.com/question/461245
#SPJ2
how many atoms are in 4.90 mol of Al2O3
Answer:
12 g of 12C to three significant figures maybe?
Explanation:
tell if correct or not im sorry fi it isnt :c
8. FOR BRAINLIST!!!
Genetic variation describes naturally occurring differences among individuals within
the same population or species. It is based on the differences in the alleles in the
gene pool in a population. These differences--
I think it's either b or c
A chemist working for Udensi industries wants to create a new ink for tattoos and cosmetics. Determine the theoretical yield of iron (ll) sulfide if the chemist uses 22.5 grams of iron ? Type of rxn : AD , SR, DR , D Type of calculation : mol to mol ; mol to mass ; mass to mols mass to mass Fe S8--> Fes
Answer:
35.36 g
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
8Fe + S₈ —> 8FeS
Next, we shall determine the mass of Fe that reacted and the mass of FeS produced from the balanced equation. This can be obtained as follow:
Molar mass of Fe = 56 g/mol
Mass of Fe from the balanced equation = 8 × 56 = 448 g
Molar mass of FeS = 56 + 32 = 88 g/mol
Mass of FeS from the balanced equation = 8 × 88 = 704 g
SUMMARY:
From the balanced equation above,
448 g of Fe reacted to produce 704 g of FeS.
Finally, we shall determine the theoretical yield of FeS as follow:
From the balanced equation above,
448 g of Fe reacted to produce 704 g of FeS.
Therefore, 22.5 g of Fe will react to produce = (22.5 × 704)/448 = 35.36 g of FeS.
Thus, the theoretical yield of FeS is 35.36 g
What consist of a solid matter?
Which part of an atom has a neutral or no charge?
Answer:
Neutron
Explanation:
Neutrons has a neutral or no charge.
1
er
al he
is
I Using the Periodic table, which element
Is at an each pair
is more electro gregatire
u si, o 6.H. C w cl Br dJ - SP
lortu
Answer:
wrong
Explanation:
7isjsjosnjzisjjs6shjsmmjdjJenbzh t d grind tudbbsh8s h. rurmkr8wyhrkwijr
17.5 mL of 0.1000M NaOH was required to neutralize 25.0 mL of HCl. What was the molarity of the HCl?
Answer: The molarity of [tex]HCl[/tex] is 0.07 M
Explanation:
According to the neutralization law,
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1[/tex] = basicity [tex]HCl[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]HCl[/tex] solution = ?
[tex]V_1[/tex] = volume of [tex]HCl[/tex] solution = 25.0 ml
[tex]n_2[/tex] = acidity of [tex]NaOH[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]NaOH[/tex] solution = 0.1000 M
[tex]V_1[/tex] = volume of [tex]NaOH[/tex] solution = 17.5 ml
Putting in the values we get:
[tex]1\times M_1\times 25.0=1\times 0.1000\times 17.5[/tex]
[tex]M_1=0.07M[/tex]
Therefore, molarity of [tex]HCl[/tex] is 0.07 M
"What is the potential energy relative to the water surface of a diver at the top of a 26 m
high diving platform? Suppose she has a mass of 35 kilograms."
Answer:
PE = 8918 J
Explanation:
Formula for potential energy here is;
PE = mgh
Where;
m is mass
g is acceleration due to gravity
h is height
We are given;
m = 35 kg
h = 26 m
Thus;
PE = 35 × 9.8 × 26
PE = 8918 J
is lion decomposer consumer or a producer ?
A motor boat is traveling 10 m/s on a sunny calm day. The driver turns
off the engine. Apply Newton's first law to explain what happens to the
boat as it glides through the water. *
Answer:
If there is no resistance, current, wind, or friction on the boat, the boat would keep moving in the same direction at the same speed.
Explanation:
Newton's First Law of Motion suggests that if no external force acts upon an object, that object would continue moving in the same direction at the initial speed.
However, all objects near the surface of the earth (including the boat in this question) experience the effect of gravitational pull (an external force from the earth.) Because of these external forces, Newton's First Law of motion (when phrased in this way) would not apply to the boat.
It is frequently possible to use a more general version of this statement: if the net force on an object is zero, that object would continue moving in the same direction at the initial speed.
In other words, the object would move in the same direction at the initial speed as long as all the external forces on that object balance each other.
Assume that there is no resistance, current, wind, or friction on the boat. After the engine of the boat is turned off, the following would be the forces on this boat:
downward gravitational attraction from the earth, andupward buoyancy from the water, which counteracts the gravitational attraction on the boat.If the water is sufficiently calm, these two forces would balance one another. The external force on this boat would be zero. Hence, the boat would keep moving in the same direction at the same speed.
Why are the relative and absolute ages of fossils important to scientists?
Answer Geologists generally know the age of a rock by determining the age of the group of rocks, or formation, that it is found in. ... Relative dating places events or rocks in their chronologic sequence or order of occurrence. Absolute dating places events or rocks at a specific time.: Relative dating is used to determine a fossils approximate age by comparing it to similar rocks and fossils of known ages. Absolute dating is used to determine a precise age of a fossil by using radiometric dating to measure the decay of isotopes, either within the fossil or more often the rocks associated with it.With absolute age dating, scientists determine the absolute age of a rock in millions of years before present rather than just the age of the rock relative to the rock units around it. This information helps geologists develop more precise geological history models for the rocks and regions they study.
hope this helps u have a nice night❤️
Explanation: