Answer:
4.034x10^24 atoms
Explanation:
6.7 x 6.023x10^23 = 4.034x10^24 atoms
4.0348348050000003e+24
:|
Which of the following is true for a gas under conditions of very high pressure? (5
points)
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
2) PV = nRT, because intermolecular forces are considerable at very high
pressures.
3) PV = nRT, because all gases behave as ideal gases at very high pressures.
04) PV = nRT, because the volume of the gas would become negligible.
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
Explanation:
According to the ideal gas equation; PV = nRT. Let us recall that this equation only holds under ideal conditions.
Gases exhibit ideal behavior under high temperature and low pressure. At higher pressure, the real volume of the gas is larger than the ideal volume of the gas.
Thus, at high pressure, PV > nRT, because the real volume of the gas would be more than the ideal volume.
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal volume.
Explanation:
just took the test :)
Do u believe that you are beautiful/handsome?
Yes or No?
What is the molarity of a 750.0 milliliter solution containing 2.5 moles of solute?
ОА.
1.9 M
OB
0.0033 M
O c.
1,875 M
OD.
0.30 M
OE.
3.3 M
Molarity : It is defined as the number of moles of solute present in one liter of solution.
Therefore, the molarity of solution is 3.33
A. 1.9 M
B. 0.0033 M
C. 1,875 M
D. 0.30 M
E. 3.3 M
How do atoms combine to form all of the diverse types of matter in our universe?
Pls, Help with a good valid answer and explanation. will mark brainliest.
Answer:
Using electrons.
Explanation:
The properties of matter depend on the types of atoms that matter is made of. Matter can exist in two forms. It can be a pure substance. (ck12.org)
Atoms combine, or bond, using their electrons. When atoms from two or more different elements bond, they form a compound. (resources.finalsite.net) Atoms form chemical bonds with other atoms when there's an electrostatic attraction between them. This attraction results from the properties and characteristics of the atoms' outermost electrons, which are known as valence electrons. (wonderpolis.org)
Something like this??
How much heat must be absorbed by 375 grams of water to raise its temperature by 25 degrees Celsius? Specific heat for water= 4.184 J/g/C or K
Answer:
[tex]3.9*10^4 J[/tex]
Explanation:
See image for explanation!Answer:
[tex]\boxed {\boxed {\sf 39, 225 \ Joules}}}[/tex]
Explanation:
Since we are given the mass, temperature, and specific heat, we should use the following formula to calculate heat energy.
[tex]q=mc \Delta T[/tex]
We have 375 grams of water, the specific heat of water is 4.184 J/g ° C, and the temperature is raised 25 degrees Celsisus. Therefore:
m= 375 g c= 4.184 J/g °C ΔT= 25°CSubstitute the values into the formula.
[tex]q= (375 \ g)(4.184 \ J/g \textdegree C)(25 \textdegree C)[/tex]
Multiply the first two values together. The units of grams will cancel.
[tex]q=1569 \ J/ \textdegree C(25 \textdegree C)[/tex]
Multiply again. This time, the degrees Celsius cancel, so we are left with only the units of Joules.
[tex]q= 39225 \ J[/tex]
39,255 Joules of heat must be absorbed by the water.
A 251 ml sample of 0.45M HCl is added to 455 mL of distilled water. What is the molarity of the
final solution?
We are given:
251 mL sample of 0.45M HCl added to 455 mL distilled water
Whack a mole! (finding the number of moles):
We know that in order to find molarity, we use the formula:
Molarity = number of moles / Volume (in L)
so, number of moles is:
Number of moles = Molarity * Volume(in L)
now let's plug the values for the HCl solution to find the number of moles
Number of moles = 0.45M * 0.251 L
Number of moles = 0.113 moles
Time to concentrate (finding the final concentration):
Total final volume = 251 mL + 455 mL = 706 mL = 0.706 L
Number of moles of HCl = 0.113 moles
Molarity = Number of moles / Volume (in L)
Molarity = 0.113 / 0.706
Molarity = 0.16 M
___________________________________________________________
BONUS METHOD TIME!!!
We know the relation:
M1 * V1 = M2 * V2
where M1 and M2 are the initial and final molarities and V1 and V2 are initial and final volumes respectively
notice that I didn't mention that the volume has to be in Liters, that's because of the units being concerned with both sides of the equation, say I have the volume in mL and want to convert both these volumes to L, I would divide both sides by 1000, which would NOT change the overall value
Now, plugging values in this equation
(0.45) * (251) = (251 + 455)* (M2)
112.95 = (706)(M2)
M2 = 112.97/706 [dividing both sides by 706]
M2 = 0.16 Molar
Unlike homogeneous solutions, the
particles in a colloid are [?] and [ ]
through a semi-permeable membrane.
A
B
visible
invisible
Unlike homogeneous solutions, the particles in a colloid are Visible, and will pass through a semi-permeable membrane. The correct options are A. and A.
What are colloidal particles?Colloidal particles are the small and minute particles that are present in the solid. Their size is from 10 nano microns to greater than 10 microns. They are visible through a membrane.
There are four types of colloidal particles that are: sol, emulsion, foam, and aerosol. These particles are solid particles and examples are milk, mayonnaise, butter, etc.
The passing through and the visibility of the colloidal particles depends on the size of the pores. If the pore size is bigger it may not transfer, but if the size is small they can transfer through the membrane.
Thus, the correct option are A. Visible, and A. Will pass.
To learn more about colloidal particles, refer to the link:
https://brainly.com/question/11640006
#SPJ2
The question is incomplete. Your most probably complete question is given below:
A. Visible,
B. Invisible
A. Will pass
B. Will not pass
Draw the major organic product in the reaction scheme. Be sure to clearly show stereochemistry (if applicable). The starting material is an alkyne where carbon 1 is bonded to cyclopentane and carbon 2 is bonded to H. Step 1 is N a N H 2. Step 2 is C H 3 I. Step 3 is sodium in liquid ammonia. Draw the major organic product.
Answer:
See answer below
Explanation:
The picture below will show you the final product and mechanism.
In the first step, the NaNH₂ is a strong base, so, this base will substract the hydrogen from carbon 2, to generate a negative charge there, and then, carbon 2 becomes a nucleophyle.
As a nucleophyle it will attack to the CH₃I in the next step, and it will attach to the CH₃.
The second step is just a regular step to reduce the triple bond of the alkyne to alkane or alkene, this will depend on the quantity of the reactant. In this case, an alkene.
Hope this helps,,,,,,k
What is the source of energy in nuclear weapons?
A. Combustion
B. Gravity
C. Fusion
D. Fission
Besides filament-based detectors, what else are sometimes used to find flammable liquids?
A. Radar detectors
B. Dogs
C. Chemical sprays
D. Carbon monoxide detectors
Answer:
D
Explanation:
can u be my friend i'm new
Besides filament-based detectors, sometimes used to find flammable liquids are carbon monoxide detectors. Hence option D is correct.
What are detector?Detector are defined as a tool for detecting the presence of radioactivity or electromagnetic waves. Since 1881, metal detectors have been employed for diagnostic purposes. They have been used to identify a wide range of foreign bodies and medical equipment, including bullets, intraocular metallic pieces, ingested coins, and other foreign things. Detecting metallic things quickly may help with diagnosis or therapy.
Carbon monoxide detectors are defined as a tool that looks for carbon monoxide (CO) gas to stop carbon monoxide poisoning. The purpose of CO alarms is to alert you to any unexpected CO buildup in your home. These greater levels of CO may be brought on by fuel-burning appliances that are not properly maintained, installed, or operated, by fireplaces or appliances that draft backward, or by idling cars in garages.
Thus, besides filament-based detectors, sometimes used to find flammable liquids are carbon monoxide detectors. Hence option D is correct.
To learn more about detector, refer to the link below:
https://brainly.com/question/13155639
#SPJ2
1. For each of the following formulas:
1) if ionic, write the formulas of the ions; if covalent, draw the Lewis structure
2) For each covalent compound, describe the electronic and molecular geometry
3) For each covalent compound, describe the hybridization of the central atom
4) Name each compound, except the organic one.
5) How many sigma and how many pi bonds does each compound have?
MnSO4 CH3NH2 PCl5 O2 LiF
Answer:
See Explanation
Explanation:
The ionic compounds are; MnSO4 and LiF
The covalent compounds are; CH3NH2, PCl5 and O2
1) The formulas of the ions are;
MnSO4 - Mn^2+ SO4^2-
LiF - Li^+ F^-
The structure of each of the three covalent molecules is shown in the images attached to this answer.
2) CH3NH2 - Has a tetrahedral molecular geometry and electronic geometry
PCl5 - Has a trigonal bipyramidal molecular geometry and electronic geometry
O2 - Has a linear molecular geometry and electronic geometry.
3) CH3NH2 is sp3 hybridized
PCl5 is sp3d hybridized
O2 - is sp2 hybridized
4) MnSO4 - Manganese II sulphate
PCl5 - Phosphorus pentachloride
O2 - Oxygen molecule
LiF- Lithium fluoride
5) PCl5 - Five sigma bonds and no pi bond
CH3NH2 - 6 sigma bonds and no pi bond
O2 - 1 sigma bond and 1 pi bond
Which of the following substances can be dissolved in pure water to give a basic solution?
Hydrogen chloride
Sodium bromide
Sodium hydroxide
Sodium chloride
I think it's sodium hydroxide
Explanation:
sodium hydroxide is a base
Over a period of 30 days a student studied the night sky and recorded his observations. One night he watched a shooting star streak across the sky. His curiosity led him to list all the possible things it could be, then after researching, analyzing and comparing each, he proposed that which of the following was the most logical identification of a "shooting star? Answer F asteroid G comet H meteor J moon
Answer:
meteor
Explanation:
The most logical identification of a "shooting star" is a meteor. A meteor is basically any material from outerspace that falls to Earth. The main characteristic of a meteor is that from our point of view on the surface of the Earth it looks like a shooting star because we see a streak of light behind it. This light is simply dust and rock from the meteor burning up as it enters the Earth's atmosphere, leaving a "tail" of light behind it. Which to us looks like a shooting star.
UV light can damage biological molecules because it has sufficient energy to break bonds within molecules. A carbon-carbon single bond typically requires 348 kJ/mol of energy to break it. What is the longest wavelength of light with energy sufficient to break this bond
Answer:
5.72 × 10⁻³¹ m
Explanation:
Step 1: Given and required data
Energy to break 1 mole of C-C single bonds (E): 348 kJPlanck's constant (h): 6.63 × 10⁻³⁴ J.sSpeed of light (c): 3.00 × 10⁸ m/sStep 2: Calculate the longest wavelength of light (λ) with energy sufficient to break this bond
We will use the Planck-Einstein relation.
E = h × c/λ
λ = h × c/E
λ = (6.63 × 10⁻³⁴ J.s) × (3.00 × 10⁸ m/s)/(348 × 10³ J) = 5.72 × 10⁻³¹ m
How many moles of Carbon can be made from 6.37 moles of Iron?
Answer:
Percent yield = 57.7 %Explanation:
How many moles are in 3.72 x 10^27 atoms of iron?
Answer: There are [tex]0.617 \times 10^{4}[/tex] moles present in [tex]3.72 \times 10^{27}[/tex] atoms of iron.
Explanation:
According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] atoms present in one mole of a substance.
Hence, moles present in [tex]3.72 \times 10^{27}[/tex] atoms are calculated as follows.
[tex]Moles = \frac{3.72 \times 10^{27}}{6.022 \times 10^{23}}\\= 0.617 \times 10^{4} mol[/tex]
Thus, we can conclude that there are [tex]0.617 \times 10^{4}[/tex] moles present in [tex]3.72 \times 10^{27}[/tex] atoms of iron.
How is matter classified,Give example for each?
Matter can be classified into 2 groups, Pure substance and Mixture.
Pure substance is a type of matter with "the same physical and chemical properties throughout the sample". Examples include tin, copper, oxygen, chlorine.
Mixtures on the other hand, are two or more combined substances that can be seperated. Some examples include smog, mud, sea water and air.
Ice melts after adding heat. The free energy is ————— !
A. Exothermic
B. Not temperature dependent
C. Temperature dependent
D. Depended on how it is heated
E. React with active metals to form h2 gas
F. Endothermic
Fill out the following regarding the element
Atomic Number
Atomic Mass
Number of Protons
Number of Electrons
Number of Neutrons
Answer:
1 is 84
2 is 218
3 is 84
4 is 84
5 is 134
At 27.0°C, the volume of a gas is 630 L. At the same pressure, its volume is 92,0 mL at a temperature of
Answer:
–272.96 °C
Explanation:
From the question given above, the following data were obtained:
Initial temperature (T₁) = 27.0 °C
Initial volume (V₁) = 630 L.
Final volume (V₂) = 92.0 mL
Final temperature (T₂) =?
Next, we shall convert 27.0 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = 27.0 °C
Initial temperature (T₁) = 27.0 °C + 273
Initial temperature (T₁) = 300 K
Next, we shall convert 92.0 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
92 mL = 92 mL × 1 L / 1000 mL
92 mL = 0.092 L
Next, we shall determine the final temperature.
Initial temperature (T₁) = 300 K
Initial volume (V₁) = 630 L.
Final volume (V₂) = 0.092 L
Final temperature (T₂) =?
V₁ / T₁ = V₂ / T₂
630 / 300 = 0.092 / T₂
2.1 = 0.092 / T₂
Cross multiply
2.1 × T₂ = 0.092
Divide both side by 2.1
T₂ = 0.092 / 2.1
T₂ = 0.04 K
Finally, we shall convert 0.04 K to celsius temperature. This can be obtained as follow:
T(°C) = T(K) – 273
Final temperature (T₂) = 0.04 K
Final temperature (T₂) = 0.04 – 273
Final temperature (T₂) = –272.96 °C
mrs tuckers class is doing an experiment they fill up a cup with ice water they measure the temperature of both the water and the classroom after one hour . what will mrs tucker observe about the temperature of ice water after one hour
A. The temperature will increase
B. The temperature Will remain the same
C. The temperature will decrease greatly
D. The temperature Will decrease slightly
Answer:
Ofc D. bc if the temp decreases, that means it is getting colder u dummy! But if it increases, it is getting warmer.
Explanation:
I got it right on USATestprep for using common sense, mark me the brainliest.
HCN
H:C:N:
3.
Is this Lewis Structure correct?
Answer:
No, your missing some bonds
What occurs when a reaction reaches equilibrium?
1)The concentration of the reactants increases.
2)The concentration of the products increases
3)The rate of the forward reaction is equal to the rate of the reverse reaction
4)The rate of the forward reaction is slower that the rate of the reverse reaction.
Answer:
3)The rate of the forward reaction is equal to the rate of the reverse reaction
Answer:
The Rate of Forward Reaction is equal to the rate of the reverse reaction.
Explanation:
Hope this helps :)
Is This An Igneous Rock Or Metamorphic Or Sedimentary?
Answer:
Metamorphic
Explanation:
Answer: thats metamorphic rock
The cation that has the same number of electrons (isoelectronic) as Ne is
None of the listed options
O Na
Mg 2-
All of the listed options
O AI 3-
A gas contained in a steel tank has a pressure of 1.5atm at a temperature of 320K. What will be the gas pressure when the temperature changes to 450K at a constant amount of gas and volume?
Answer:
2.109 atm
Explanation:
This is Gay-Lussac's Law when the temperature of a sample of gas in a rigid container is increased, the pressure of the gas increases as well. The increase in kinetic energy results in the molecules of gas striking the walls of the container with more force, resulting in a greater pressure. Gay-Lussac's Law states that the pressure of a given mass of gas varies directly with the absolute temperature of the gas, when the volume is kept constant. Gay-Lussac's Law is very similar to Charles's Law, with the only difference being the type of container.
So for this one:
[tex]\frac{P_{1} }{T_{1}} =\frac{P_{2} }{T_{2}}[/tex]
Rearrange it to
P2= (P1 x T2)/T1
P2= (450 x 1.5)/320 = 2.109 atm
what do adamantium,vibranium and unobtainum have in common
Answer:
they're all fake
Explanation:
A bowl containing 70 grams of water, is heated from 10 °C to 90 °C. The specific heat of
water is 4.184 J/gºC. How much heat energy is required to heat the water?
Answer:
23430.4 J.
Explanation:
From the question given above, the following data were obtained:
Mass (M) = 70 g
Initial temperature (T₁) = 10 °C
Final temperature (T₂) = 90 °C
Specific heat capacity (C) = 4.184 J/gºC
Heat (Q) required =?
Next, we shall determine the change in the temperature of water. This can be obtained as follow:
Initial temperature (T₁) = 10 °C
Final temperature (T₂) = 90 °C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = 90 – 10
ΔT = 80 °C
Finally, we shall determine the heat energy required to heat up the water. This can be obtained as follow:
Mass (M) = 70 g
Change in temperature (ΔT) = 80 °C
Specific heat capacity (C) = 4.184 J/gºC
Heat (Q) required =?
Q = MCΔT
Q = 70 × 4.184 × 80
Q = 23430.4 J
Therefore, 23430.4 J of heat energy is required to heat up the water.
If an acid has a pH of 2, what is its [H^ + ] ?
Show work
Check G the answer is up theree
What is the concentration of a solution with a volume of 0.900 L that contains 2.05 mol of iron (II) hydroxide?
Answer:
The concentration is 2.277
Explanation:
The formula for finding the concentration of a solution is C= mole of solute divided by the volume of the solution
Therefore, C= 2.05/0.900
C=2.277