Hint: The half life of an element is the amount of time it takes for half of that element sample to decay into a different
element
Based on the graph of radioactive decay for Co-60, how many years does it take for a 10 gram sample of Co-60 to decay into a 125
gram sample?
-0.)
A)
3 years
B)
5.27 years
15.8 years
D)
3 half lives
^ $* ENG
Answers
Answer:
Concept: Half-life
Just a general tip, learn to format your question and fix any grammatical issues. Post the question as a picture instead next time, because the copy and pasting clearly failed for you. I'm assuming you mean 1.25 grams.So it would take 3 yearsRelated Questions
Good day pleases help
Answers
is the lorax story relevant today society?
Answers
Answer:
well i would say yes because how the factory made the air bad and how they all were fighting just about a tree
Explanation:
Answer: LOL XD no because of CO/VID
Explanation: BRAINLIEST PLS LOL
* The cost of table salt and table sugar is Rs 15 per kg.
and Rs 69 per kg respectively calculate their cost per mole?
Answers
Cost per mole
Table salt : Rs 0.878
Table sugar : Rs 23.63
Further explanationGiven
Cost table salt (NaCl) = 15/kg
Cost table sugar(sucrose-C12H22O11) = 69/kg
Required
cost per mole
Solution
mol of 1 kg Table salt(NaCl ,MW= 58.5 g/mol) :
[tex]\tt mol=\dfrac{1000~g}{58.5}=17.09~mol=Rs~15\rightarrow 1~mol=Rs~0.878[/tex]
mol of 1 kg Table sugar(C12H22O11 ,MW= 342 g/mol) :
[tex]\tt mol=\dfrac{1000}{342}=2.92~mol=Rs~69\rightarrow 1~mol=Rs~23.63[/tex]
A student uses a magnet to move a 0.25kg metal ball. The magnet exerts a force of 5N on the ball. What is the acceleration of the ball when it begins to move ?
Answers
Answer:
20 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{5}{0.25} \\ [/tex]
We have the final answer as
20 m/s²Hope this helps you
Use the graph to determine the instantaneous speed at 2 seconds.
What is the average speed over the entire trip?
Answers
Answer:
The instantaneous speed at 2 seconds =
3 m/s
The average speed over the entire trip is
2 m/s
Explanation:
Answer above is wrong and doesn't state anything about the answer, so this is the correct answer hope this helped! :)
Answer:
1.) 3 m/s 2.) 2 m/s
Explanation:
I hope this helps!!
Which example shows how genetic engineering can be used in the agricultural industry?
A.
Two tomato plants that produce sweet tomatoes are crossed to produce offspring that also produce sweet tomatoes.
B.
A horse is bred with a donkey to produce a hybrid offspring that has characteristics of both parents.
C.
A gene for pest resistance is inserted into the genome of a corn plant.
D.
A sheep is cloned to produce an exact copy of the original sheep.
Answers
Answer:
c. a gene for pest resistance is inserted into the genome of a corn plant
Explanation:
Answer: A duh
Explanation:
becastse
Apple juice can be classified as which of the following?
O A compound
An Element
O A mixture
O A pure substance
Answers
Answer:
mixture
Explanation:
Answer:
Mixture
Explanation:
PLEASE HELP! ITS URGENT! I GIVE BRAINLY
Using the Law of Conservation of Matter, determine the number of grams of iron sulfide (FeS) that will be produced in this reaction.112g Fe + 64g S → _____ g FeS *
a. 48g
b. 64g
c. 112g
d. 176g
Answers
Answer:
Its C
Explanation:
If you think about it logically all the other answers don't make sense A and B are to small of a number And D is to Big of a number
Hope this Helps!!
Calculate the number of protons and neutrons for ²⁴Mg and 88Sr.
Answers
Answer:
12 protons and 12 neutrons are present in Mg and
38 protons and 50 neutrons are present in Sr
Explanation:
Answer:
For ²⁴Mg
1. Proton number = 12
2. Neutron number = 12
For ⁸⁸Sr:
1. Proton number = 38
2. Neutron number = 50
Explanation:
For ²⁴Mg:
1. Determination of the number of proton.
The atomic number of an element is simply defined as the number protons in the atom of the element. The atomic number of ²⁴Mg is 12 since no two elements have the same atomic number.
Atomic number = 12
Proton number = Atomic number
Proton number = 12
2. Determination of the Neutron number.
Mass number = 24
Proton number = 12
Neutron number =?
Mass number = Proton + Neutron
24 = 12 + Neutron
Collect like terms
Neutron = 24 – 12
Neutron number = 12
For ⁸⁸Sr:
1. Determination of the number of proton.
The atomic number of ⁸⁸Sr is 38.
Atomic number = 38
Proton number = Atomic number
Proton number = 38
2. Determination of the Neutron number.
Mass number = 88
Proton number = 38
Neutron number =?
Mass number = Proton + Neutron
88 = 38 + Neutron
Collect like terms
Neutron = 88 – 38
Neutron number = 50
If a parent cell has 24 chromosomes , how many chromosomes will each daughter cell have? Then compare the chromosomes in the parent cell and the daughter cells.
Answers
Answer:
If a cell has 24 chromosomes before cell division then daughter cell resulting from mitotic division will have 24 chromosomes while daughter cell resulting from the meiotic division will contain 12 chromosomes each.
Explanation:
How many moles of oxide are in 0.050 g of Iron(III) oxide?
Answers
Answer:
0.00031311017345051
What of these should Hailey include in her list?
Synthetic polymers are biodegradable.
Synthetic polymers are not flexible.
Synthetic polymers are recycled cheaply.
Synthetic polymers are inexpensive to produce.
Answers
Answer:
Hailey should add, they are inexpensive to produce.
Explanation:
Reason being why they are inexpensive to produce, is due to them being chemical based and easy to product in the factory setting. Which makes them extremely cheap to make.
Reason being why the others are wrong, synthetic polymers are not biodegradable as they are made in a factory with oils. Synthetic polymers are not flexible due to them being used for harder products. Synthetic polymers are not recycled cheaply as they are made with chemicals which makes it very hard to recycle.
answer:D
Explanation: i took it
Is science logical please help meeeeeee
Answers
Answer:
It kind of is logical so my answer is yes
"Indicate in each whether the following electron configurations correspond to an atom in its ground state, excited state, or is impossible."
a. [tex]{1s}^{2} {2s}^{2} {2p}^{4} [/tex]
b. [tex] {1s}^{2} {2s}^{2} {2p}^{3} {2d}^{1} [/tex]
c. [tex] {1s}^{2} {2s}^{2} {2p}^{3}{3s}^{1} [/tex]
d. [tex] {1s}^{2} {2s}^{1} {2p}^{2} [/tex]
e. [tex] {1s}^{2} {2s}^{2} {2p}^{1} [/tex]
f. [tex] {1s}^{2} {2s}^{3} [/tex]
Please, I really need help. I don't know what to do...
Answers
Answer:
Explanation:
Firstly, let's define what ground and excited state electronic configuration.
Ground state electronic configuration is when the electrons of the atom are in there lowest possible energy level while excited state electronic configuration is when electron(s) have moved to a higher energy level. Examples of these are provided in the options
a. 1s²2s²2p⁴ - This is a ground state electronic configuration (of oxygen) because the electrons are in there lowest possible energy level.
b. This option is not displaying (it is displaying something like an image that isn't loading)
c. 1s²2s²2p³3s¹ - We can see from this that an electron jumped from 2p energy level to 3s (p energy level ought to be completely filled with 6 electrons before another electron moves to the next energy level) meaning the electron is in it's excited state thus this is an excited state electronic configuration (of oxygen).
d. 1s²2s¹2p² - We can see from this also that an electron jumped from the 2s energy level to the 2p energy level (making it 2p² instead of 2p¹ in the ground state). The 2s energy level should ordinarily have 2 electrons. Thus, this is an excited state electronic configuration (of boron).
e. 1s²2s²sp¹ - This is a ground state electronic configuration (of boron) since all the electrons are in there lowest possible energy level.
f. 1s²2s³ - This configuration is impossible because the s energy level should only contain a maximum of 2 electrons, thus impossible to have 3 electrons in the s energy level
How many atoms are present in 1.4 grams of aluminum?
Answers
Answer: 3.2x10^23
Explanation:
Start by finding the molar mass of aluminum.
Then turn grams into moles by dividing grams of substance by molar mass. 1.4g÷26.98g
Then multiply that by 6.022x10^23 atoms. 0.0519x6.022x10^23
You can use dimensional analysis to solve this type of problem.
What is the frequency of a light wave who has a wavelength of 5.5 x 10-14 m v
Answers
Answer:5.45×10^21
Explanation:
Use:f=c/λ
What does eggshells change color under the influence of various liquids?
Answers
Answer:Adding calcium to chicken's food is going to make the eggshells firmer. Independent variable:
Explanation:
When an atom becomes a negative ion, it
Answers
It becomes a positives atom. Since it loses electrons it has more of a positive charge than a normal atom.
A 1.25 g sample of aluminum is reacted with 3.28 g of copper (II) sulfate. What is the limiting reactant?
2Al(s) + 3CuSO4(aq) = Al2(SO4)3(aq) + 3Cu(s)
Select one:
a. Copper
b. Aluminum sulfate
c. Aluminum
d. Copper (II) sulfate
Answers
Answer:
d. Copper (II) sulfate
Explanation:
Given data:
Mass of Al = 1.25 g
Mass of CuSO₄ = 3.28 g
What is limiting reactant = ?
Solution:
Chemical equation:
2Al + 3CuSO₄ → Al₂ (SO₄)₃ + 3Cu
Number of moles of Al:
Number of moles = mass/molar mass
Number of moles = 1.25 g/ 27 g/mol
Number of moles = 0.05 mol
Number of moles of CuSO₄:
Number of moles = mass/molar mass
Number of moles = 3.28 g/ 159.6 g/mol
Number of moles = 0.02 mol
now we will compare the moles of reactant with product.
Al : Al₂ (SO₄)₃
2 : 1
0.05 : 1/2×0.05=0.025 mol
Al : Cu
2 : 3
0.05 : 3/2×0.05 = 0.075 mol
CuSO₄ : Al₂ (SO₄)₃
3 : 1
0.02 : 1/3×0.02=0.007 mol
CuSO₄ : Cu
3 : 3
0.02 : 0.02
Less number of moles of reactants are produced by CuSO₄ thus it will act as limiting reactant.
What very specific property of mineral calcite allows geologists to quickly identify it in a mixture of other colorless minerals
Answers
Other Identifying Characteristics
Calcite is easy to identify even without testing the reaction to HCl, by its hardness, luster and cleavage. Another special property is magnetism
3. (10 Points) Write a double replacement reaction where one of the products is
copper (11) oxide. Include the states of matter for each of the reactants and
products.
Answers
Answer:
Up to now, we have presented chemical reactions as a topic, but we have not ... A single-replacement reaction is a chemical reaction in which one element is ... single-replacement reactions will occur between two given reactants. This is ... Use the activity series to predict the products, if any, of each equation.
Explanation:
(oh no)
What is the mass of silicon when there are 1.8 x 10^21 atoms of silicon?
Answers
Answer:
Mass = 0.084 g
Explanation:
Given data:
Mass of silicon = ?
Number of atoms of silicon = 1.8 × 10²¹ atom
Solution:
Avogadro number:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
1.8 × 10²¹ atom × 1 mole / 6.022 × 10²³ atoms
0.299× 10⁻² mol
0.00299 mol
Mass of silicon:
Mass = number of moles × molar mass
Mass = 0.00299 mol × 28.1 g/mol
Mass = 0.084 g
What happens when you put an ice-pop outside? This is for the people who don’t know
Answers
Answer:
It melts
Explanation:
Answer:
It melts?
Explanation:
Balance equation PLEASSEEE HELPPP MEEE
Answers
Answer:
2AgNO₃ + MgCl₂ ⇒ 2AgCl + Mg(NO₃)₂
Explanation:
Match both sides of the equation. practice practice
The partial symbol for a particular ion is 26M2+ What are the number of electrons contained in one ion
Answers
Answer:
24
Explanation:
26-2=24 because when an atoms loses 2 electrons it gains 2+ charge
Is radium usually considered as part of the alkaline earth category in terms of chemistry?
Answers
Explanation:
Radium (atomic number 88) has similar properties to barium and is also in the Group 2 category. However, radium is a radioactive element and is generally under the category of radioisotopes in addition to being an alkaline earth metal, because it is not a stable element.
_____is the chemical bond formed when two atoms share electrons.
Answers
Answer:
covalent bond
Explanation:
Answer:
The covalent bond is the chemical bond formed when two atoms share electrons.
Need help!!! Don’t understand
Answers
To begin with...
The bond between carbon and oxygen is suppose to have 3 bonds in between
Second:
The lone pairs are not drawn. Since carbon monoxide has 3 bonds in between it should have a lone pair (2 dots) left over on each atom.
Reminder: in order to satisfy the octet rule EACH atom must have 8 electrons. Carbon has 4 valence shell electrons and oxygen has 6. In order to satisfy this rule, there should be 3 bonds in between which makes a total of 6 for each atom plus the lone pairs that make up the 8.
I hope that’s not too confusing, if you still have any questions please let me know in the comments (:
Aluminium and oxygen react to produce aluminium oxide,
4 Al + 3 02 - 2 AL,O
How many kilograms of aluminium oxide are formed when 5,4 kg of aluminium react
with excess oxygen?
A 5,4 kg
B 88 kg
C 10.2 kg
D 33,6 kg
Answers
The balanced reaction is
4 Al + 3 O₂ → 2 Al₂O₃
so that for every 4 moles of Al and 3 moles of O2, you end up with 2 moles of Al₂O₃.
• Al has molar mass ≈ 26.982 g/mol
• O has molar mass ≈ 15.999 g/mol
• Al₂O₃ thus has molar mass ≈ 101.961 g/mol
You start with 5.4 kg = 5,400 g of Al, or
(5.4 kg Al) • (1/26.982 mol/g) ≈ 200.133 mol Al
Al₂O₃ is produced in a ratio of 2 moles to every 4 moles of Al, so you end up with about 100.067 mol Al₂O₃, which has a mass of
(100.067 mol Al₂O₃) • (101.961 g/mol) ≈ 10,202 g = 10.2 kg
so the answer is C.
Nuestra alimentación ha empeorado tanto y la oferta de alimentos no saludables (ultraprocesados ricos en sal, grasas y azúcares) es tan amplia, que debemos hacer un esfuerzo en reaprender y reconocer los alimentos que benefician nuestra salud. ¿Qué alimentos debemos escoger para preparar un plato saludable?
Answers
Answer:
Nuestra alimentacion debe estar basada en alimentos ricos en vitaminas, minerales como las frutas verduras, legumbres y semillas.
Explanation:
Los alimentos ultraprocesados son altos en sodio, conservantes, y pobres en vitaminas, es por eso que deben ser evitados ya que algunos hasta se consideran hasta carcinogenos.
No se descarta los compuestos quimicos ultraprocesados ricos en grasa perjudiciales para la salud ya que fomentan la formacion de placa de ateromas.