Answers
Answer:
Explanation: p + ci=pci
h+o=h io
Related Questions
As water is cooled, its density increases until it reaches about
A. 4°C
B. 25°C
C. O'C
D. -2°C
Answers
If the temperature of a substance increases will the particles of that substance be moving faster or slower or at the same speed as they were before the temperature changed
Answers
Answer:
If the temperature increases, temperature reflects the speed of the molecules, so if the molecules are at a higher temperature, they are faster and they start to break bonds and new things react.
Explanation:
Can someone tell me about kinetic, potential, and gravitational energy?
Answers
Answer:
the internet can teach you alot about all 3 things
Explanation:
Answer:
if you go on YT and search kinetic, potential, and gravitational energy their will be a bill nye vid that is very informational on the topic at hand!!!
Explanation:
hope this helps!!
What is an atomic nucleus
Answers
Answer:
The atomic nucleus is the small, dense region consisting of protons and net at the center of an atom.
Explanation:
The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom, discovered in 1911 by Ernest Rutherford based on the 1909 Geiger–Marsden gold foil experiment. ... Protons and neutrons are bound together to form a nucleus by the nuclear force.
Answer:
The atomic nucleus is the small , dense region consisting of protons and neutrons at the center of an atom .
Use the equation below to solve the problem that follows.
2H2 (g) + O2 (g) → 2H2O (g)
When David reacts 13.8 grams of hydrogen gas with excess oxygen, 87.0 grams of water are formed. Calculate his percent yield of water.
Im very loss with this question
Answers
Percent yield of water : 70%
Further explanationReaction
2H₂ (g) + O₂ (g) → 2H₂O (g)
mol H₂(MW= 2 g/mol) :
[tex]\tt \dfrac{13.8~g}{2~g/mol}=6.9~mol[/tex]
mol H₂O = mol H₂ = 6.9
mass H₂O(theoretical) :
[tex]\tt 6.9\times 18~g/mol=124.2~g[/tex]
[tex]\tt \%yield=\dfrac{actual}{theoretical}\times 100\%\\\\\%yield=\dfrac{87}{124.2}\times 100\%=70\%[/tex]
Which of these describes a challenge that the engineer of a high-altitude
airplane would need to consider?
A. More fuel is used at higher altitudes.
B. The airplane may succumb to the power of gravity as lift
decreases at higher altitudes.
C. The airplane may need a heat shield for protection from sonic
booms.
O D. The airplane will create more drag at higher altitudes than lower
altitudes.
Answers
Answer:
I think its (B)
Explanation:
as when the air thins out at higher elevations, your lift decreases so at some point, the plane cant produce enough lift to overcome gravity.
Need help ASAP!!please
Answers
Does the model correctly represent the electron dot diagram of magnesium? Why or why not? Check all that apply.
M g with 1 dot above and 1 right.
*{Yes, because the chemical symbol of magnesium is Mg.}
No, because the chemical symbol of magnesium is Mn.
*{Yes, because magnesium has two valence electrons.}
No, because magnesium has seven valence electrons.
No, because both of the dots should be on top of the chemical symbol
Answer 1 and 3
Answers
Answer:
1 and 3
Explanation:
Answer: A and B or 1 and 3
Explanation:
Which of the following elements is a metalloid? A. phosphorus B. cobalt C. silicon D. magnesium
Answers
Answer: silicon
Explanation:it just is
Respuesta
es la C. silicio
Explanation:
No existe una definición estandarizada de elemento metaloide ni un consenso completo sobre los elementos que son metaloides.
En la clasificación de metaloides se suelen incluir a:
Boro (B)
Silicio (Si)
Germanio (Ge)
Arsénico (As)
Antimonio (Sb)
Telurio (Te)
What is the concentration of a solution of 10. Moles of copper nitrate in 5.0 liters of solution
Answers
Answer:
10.5
Explanation:
well we added together so thats the result
Carbon dioxide is formed by the given formula.
C(s)+O2(g)→CO2(g)
Carbon dioxide is
A
a compound of two elements, carbon and oxygen.
B
a mixture of two compounds, carbon and oxygen.
C
a compound of two atoms, carbon and oxygen.
D
an element of two atoms, carbon and oxygen.
Answers
Answer:
A
Explanation:
First person to comment there crush name get brainlyest
Answers
Answer:
:0
Explanation:
David <3
Which of the following are electromagnetic waves? *
Water waves
Sound waves
Radio waves
Seismic waves
Answers
Why are the Galápagos Islands such a place of interest to the world
Answers
Answer:
Explanation:
In a chemical reaction, what happens to the total number of each type of atom?
A
The total number of each type of atom always stays the same.
B
The total number of each type of atom either increases or decreases.
C
The total number of each type of atom always increases.
D
The total number of each type of atom always decreases.
Answers
Answer:
A
Explanation:
The total number of each type of atom always stay the same.
Which of the following describes the energy transformations that occur when a toaster is used to make toast?
Thermal energy is transformed into chemical energy in the toaster, and chemical energy is transformed into thermal energy in the toast.
Electrical energy is transformed into thermal energy in the toaster, and chemical energy is transformed into thermal energy in the toast.
Light energy is transformed into thermal energy in the toaster, and thermal energy is transformed into chemical energy in the toast.
Electrical energy is transformed into thermal energy in the toaster, and thermal energy is transformed into chemical energy in the toast.
Answers
Answer:
Thermal energy (B)
Explanation:
just did it
Electrical energy is transformed into thermal energy in the toaster, and chemical energy is transformed into thermal energy in the toast. Hence option b is correct.
What is chemical energy?Chemical energy is defined as chemical substances' potential energy, which is released as they experience chemical reactions and change into other substances. Additionally, it is what binds a substance's molecule's together. The body transforms or changes the chemical energy in food into heat and mechanical motion.
The wire attached to the power source transmits electrical energy to the toaster. The heating element is a part of the toaster. This heating element transforms electrical energy into heat energy, which aids in toast preparation, when it comes into contact with it. Thus, with an electric toaster, electrical energy is converted to heat energy.
Thus, electrical energy is transformed into thermal energy in the toaster, and chemical energy is transformed into thermal energy in the toast. Hence option b is correct.
To learn more about chemical energy, refer to the link below:
https://brainly.com/question/1371184
#SPJ2
first to answer correctly gets brainleist! (you dont needa hear that vid thingy tahts just for ppl who cant read or need orial commidations or wtv lol)
Answers
Answer:
The seasons are a result of the tilt of the earth
How does a longshore current change the beach
Answers
Answer:
As this sheet of water moves on and off the beach, it can “capture” and transport beach sediment back out to sea. This process, known as “longshore drift,” can cause significant beach erosion.
Can somebody help me with this??!
Answers
8
Calcium carbonate (limestone) decomposes when heated.
Caco, + CaO + CO2
b) Calculate the volume of carbon dioxide produced if 10 grames were decomposed.
Answers
Explanation:
Equation -
CaCO₃ → CaO + CO₂
molecular masses of -
CaCO₃ = 40+12+16×3 = 100 g/mol
CaO = 40+16 = 56 g/mol
CO₂ = 12+16×2 = 44 g/mol
Now,
If 100 g of CaCO₃ is decomposed then it produces 56 g of CaO and 44g of CO₂
Then,
If 1 g of CaCO₃ is decomposed then it produces 56/100g of CaO and 44/100g of CO₂
Now,
Here in question, 10g of CaCO₃ is decomposed
It means, It produces
56/100 × 10 = 56/10 = 5.6 g of CaO and
44/100 × 10 = 44/10 = 4.4 g of CO₂
Now,
we get that 10 g of CaCO₃ on burning produces 4.4 g of CO₂
we need to calculate volume of 4.4 g of CO₂
mole = mass/Gram molecular massThen,
mole = 4.4/44 = 0.1
Now,
volume = mole × 22.4 (in Litres)
= 0.1 × 22.4 = 2.24 L
Hence,
2.24 L of CO₂ will be produced when 10g of CaCO₃ decomposed.
answer this pls thanks
Answers
Answer: It is element nitrogen. It has an atomic number of 7 and the valence electron is 5. It needs 3 electrons to complete its octet state. That's why sometimes it has the oxidation number of -3 in ammonia.
Someone answer these please! It’s multiple choice
Answers
Answer: Number 1 is titanium.
The one where you calculate a tin block is 13.0cm.
3. Is A) Same Density And Same Chemical Properties.
4. Is also A. Ne
Explanation:
. The model shows Earth in several positions relative to the Sun. In which position is it winter in North America?
Answers
As a result of the Law of Conservation of Mass, during a chemical change the mass of the
products are equal to the mass of the:
A. particles
B. elements
C. reactants
D. compounds
Answers
Answer:
D. Reactants.
Explanation:
The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction must equal the mass of the reactants.
Help please! I’ll mark brainliest to who ever answers this first!!
Answers
Answer:
paleontologists is the answer to scientist who studies fossil
whats the formula for mass
Answers
Answer:
The unit of molar mass is kg/mol. Where, m = mass, v = velocity.
Hope that helps :)
What do radio waves and microwaves have in common?
Both are at the side of the spectrum that has the lowest frequency.
Both are found next to visible light on the electromagnetic spectrum.
Both are at the side of the spectrum that has the highest radiant energy.
Both are at the side of the spectrum that has the shortest wavelengths.
Answers
Answer:
Both are at the side of the spectrum that has the lowest frequency.
Explanation:
i took the test
Answer:
a
Explanation:
An object has a mass of 441 g and a volume
of 10 cm3. What is the density of the object
in g/cm3?
Answers
The density is the ratio of the mass to the volume. The density of the object is 44.1 g/cm³.
What is density?Density (ρ) is the quantitative measurement of the substance having grams of mass that are dissolved per cubic meter of the solution. The density is calculated as:
ρ = M ÷ V
Given,
Mass of the object = 441 gm
The volume of the object = 10 cubic meter
Density is calculated as:
ρ = 441 ÷ 10
= 44.1 g/cm³
Therefore, 44.1 g/cm³ is the density of the object.
Learn more about density here:
https://brainly.com/question/952755
#SPJ1
What makes the element oxygen different from the element hydrogen?
Answers
Answer: the difference is due to the fact that one water molecule has two hydrogen atoms to one oxygen this means it takes two water molecules (2 H2O) to make one oxygen molecule (02) .At the same time however two molecules of water (2 H20) can make two molecules of hydrogen (2 H20)
Explanation: hope this helped and mark me as brainliest please =)
Who knows the answer to this please help