help me is a critic acid a solid or a liquid??​

Explanation:

96.485 columbs=1 faraday will

deposit 64/2g= 32 g cu ion

therfore it will require

96,485 ×2/32 =? coulombs or 1/16 of

Faraday= 1 / 16 mole of electrons .

Answer:

higher temperatures increase the speed of solubility

Explanation:

This is because if the temperature of liquid is high and you place a solute inside it dissolves faster than a low temperature

Higher temperature increases the speed of solubility affect the speed with which the solute dissolves. Therefore, option A is correct.

The term solubility is defined as the maximum amount of a substance that will dissolve in a given amount of solvent at a specific temperature.

Based on the concentration of solute dissolves in a solvent, solutes are divided into highly Soluble, sparingly Soluble or insoluble substance.

When a solvent is heated, the molecules gain kinetic energy. Because of the increased rapid motion, the solvent molecules collide with the solute more frequently and with greater force. Both factors accelerate the solute's dissolution.

This is because if the temperature of the liquid is high and a solute is placed inside, the solute dissolves faster than if the temperature is low.

Thus, option A is correct.

To learn more about the solubility, follow the link;

https://brainly.com/question/29661360

#SPJ6

Answer:

64.9 L

Explanation:

pls mark as brainliest

Answer:

234.9 grams

Explanation:

Hope this helps

Answer:

114

Explanation:

bottom number minus top number. just did the test

Answer:

this option is the correct they move to an area with lower oxygen concentration because gas molecules can pass through semi-permeable and do not need transport proteins for the movement

Explanation:

i hope this will help you

can confirm that

They move to an area with a lower oxygen concentration

if the correct answer :)))

Explanation:

ape-x

Answer:

A. AgNO3

I hope it's helps

Answer:

Vibration.

Explanation:

Answer:

vibration best describes it

Explanation:

Answer: The phenomenon of osmosis can be seen in the surrounding as the when the raisins are put into water overnight. The water enters the raisins and it swells.

The osmosis can be defined as the biological phenomenon by which the water or any other liquid enters from an area of its higher concentration to an area of its lower concentration via semi permeable membrane.

Diffusion can take place in between gases and in between gases and liquid.

Exchange of gases in the lungs is an example of diffusion in liquids and burning an incense stick in the room is an example of diffusion in gases.

Answer:

0.56M es la concentración de la solución restante

Explanation:

La molaridad de una solución es una unidad de concentración definida como la relación entre las moles de soluto (En este caso, dicromato de potasio) y el volumen de la solución.

Sabiendo que para el ion dicromato:

6M = 1N

La normalidad del ion dicromato se obtiene dividiendo entre 6 su molaridad.

Moles de dicromato en las dos soluciones son:

1. 0.250L × (1.24mol / L) = 0.310 moles de dicromato

2. 0.380L × (0.65eq / L) × (1eq / 6mol) = 0.042 moles de dicromato

Así, las moles totales de dicromato de potasio son:

0.310moles + 0.042 moles = 0.352 moles de dicromato

En un volumen de 250mL + 380mL = 630mL = 0.630L

La molaridad de la solución es:

0.352 moles / 0.630L =

Answer:

Na2SO3 + H2O2 = Na2SO4 + H2O

The ionic equation of hydrogen peroxide reacting with sodium sulphide is Na₂SO₃ + H₂O₂ = Na₂SO₄⁻ + H₂O⁺.

A chemical equation known as an ionic equation expresses the constituents in an aqueous solution as dissociated ions. The ionic equation is written by using charge in them.

An example is  "NaCl" is "Na⁺ + Cl⁻".

To write an ionic equation, we should write by dissolving all soluble ionic chemicals into their corresponding ions. To demonstrate that an ion is present in the solution, it should be displayed with its charge and an (aq).  There is also a use of coefficient.

The reaction should be written as:

HS₂O₄ → 2H+ + (SO₄)²⁻

NaOH → Na+ + (OH)-

Na₂SO₄ → 2Na+ + (SO₄)²⁻

H2O exists in the molecular form

So we get 2H+ + (SO₄)²⁻ + 2Na+ + 2(OH)- →2Na+ + (SO₄)²⁻ + 2H₂O

Thus, the ionic equation is Na₂SO₃ + H₂O₂ = Na₂SO₄ + H₂O.

To learn more about an ionic equation, refer to the below link:

https://brainly.com/question/15467502

#SPJ2

Answer:

0.84kg of gatorade powder

Explanation:

From the question given, we were told that 0.6kg of gatorade powder required 5 gallons of water.

To obtain the mass of gatorade needed for 7 gallons of water, we simply do the following:

0.6kg of gatorade powder required 5 gallons of water.

Therefore, xkg of gatorade powder will require 7 gallons of water i.e

xkg of gatorade powder = (0.6 x 7)/5

xkg of gatorade powder = 0.84kg

Therefore, 0.84kg of gatorade powder will be required.

Answer:

Ozone

Explanation:

The ozone layer protects the UV rays and also theres a hole in it near antarica which is causing global warming!

Off topic sorry lol:P

I hope this helps i got the answer correct

Remember to mark brainliest

Answer:

1x10^-8 M

Explanation:

Since the solution turns blue, it mean the solution is a base.

Now, to know which option is correct, we need to determine the pH of each solution. This is illustrated below:

1. Concentration of Hydrogen ion, [H+] = 1x10^-2 M

pH =..?

pH = - log [H+]

pH = - log 1x10^-2

pH = 2

2. Concentration of Hydrogen ion, [H+] = 5x10-2 M

pH =..?

pH = - log [H+]

pH = - log 5x10^-2

pH = 1.3

3. Concentration of Hydrogen ion, [H+] = 5x10 M

pH =..?

pH = - log [H+]

pH = - log 5x10

pH = - 1.7

4. Concentration of Hydrogen ion, [H+] = 1x10-8 M

pH =..?

pH = - log [H+]

pH = - log 1x10^-8

pH = 8

A pH reading shows if the solution is acidic or basic. A pH reading between 0 and 6 indicates an acidic solution, a pH reading of 7 indicates a neutral solution while a pH reading between 8 and 14 indicates a basic solution.

From the above calculations, the pH reading indicates a basic solution when the hydrogen ion concentration was 1x10^-8 M.

Answer:

B

Explanation:

Option be is the only molecular structure with 4 carbon molecules and 10 hydrogen molecules

Answer:

B and BBr3

Explanation:

1) 3HBr + B = BBr3 + H2 (double all equation because H2)

2) 6HBr + 2B = 2BBr3 + 3H2

Answer:

10⁻³⁶ s

Explanation:

There is much speculation, but many scientists believe the universe started expanding about 10⁻³⁶ s  after the Big Bang.

Answer:

a. 0.02 moles  of NH₃, 0 moles of O₂, 0.08 moles of NO, 0.12 moles of H₂O

b. [tex]P_{NH_3}[/tex] = 12,576.5 Pa, [tex]P_{NO}[/tex] = 50,306.05 Pa, [tex]P_{H_2O}[/tex] =  74,459.1 Pa

c. The total pressure is 138,341.64 Pa

Explanation:

a. NH₃ + O₂  → NO + H₂O

The balanced chemical equation is first found to be

4NH₃ + 5O₂  → 4NO + 6H₂O

Therefore, we have;

4 moles of NH₃ reacts with 5 moles of O₂ to form 4 moles of NO and 6 moles H₂O

Dividing by the reactant with the highest number of moles which is 5 moles of oxygen gives;

4/5 moles  of NH₃ reacts with 5/5 moles of O₂ to form 4/5 moles of NO and 6/5 moles H₂O

Which is the same as 4/5 moles  of NH₃ reacts with 1 mole of O₂ to form 4/5 moles of NO and 6/5 moles H₂O

Multiplying by 0.100 gives;

0.1×4/5 moles  of NH₃ reacts with 0.1 mole of O₂ to form 0.1×4/5 moles of NO and 0.1×6/5 moles H₂O

The quantity of each gas in the container upon completion of the reaction is therefore;

(0.1 - 0.1×4/5) = 0.02 moles  of NH₃

0 moles of O₂

0.08 moles of NO

0.12 moles H₂O

b. Given that the temperature = 105°C, we have;

PV = nRT

P = nRT/V

Where:

n = Total number of moles = 0.02 + 0.08 + 0.12 = 0.22 moles

R = Universal gas constant = 8.3145 J/(mol·K)

T = Temperature = 105°C = 378.15 K

V = Volume = 5 litre = 0.005 m³

P = 0.22×8.3145×378.15/0.005 = 138,341.64 Pa

From Dalton's law of partial pressure, we have;

Partial pressure Pₓ = Xₓ × P

Where:

Xₓ = Mole fraction

Which gives for ammonia NH₃ with 0.02 moles;

Mole fraction = 0.02/0.22 = 1/11

[tex]P_{NH_3}[/tex] = 1/11 × 138,341.64  = 12,576.5 Pa

For the 0.08 moles of NO, we have

Mole fraction = 0.08/0.22 = 4/11

[tex]P_{NO}[/tex] = 4/11 × 138,341.64  = 50,306.05 Pa

For the 0.12 moles H₂O

P = 0.12×8.3145×378.15/0.005 = 74,459.1 Pa

Mole fraction = 0.12/0.22 = 6/11

[tex]P_{H_2O}[/tex] = 6/11 × 138,341.64  = 74,459.1 Pa

c. The total pressure = 12,576.5 Pa + 50,306.05 Pa + 74,459.1 Pa = 138,341.64 Pa.

Answer:

Troposphere

Explanation:

The troposphere is the lowest layer in the atmosphere, and where all the weather occurs. After the troposphere, there's the stratosphere, mesosphere, thermosphere, and exosphere.

I hope this helps!

Answer:

Troposphere is the lowest layer of the earths atmosphere.

Explanation:

Answer:

The different objects that make up a circuit are called components. A circuit must have a power source, such as a battery, and the current flows through a conductor, such as a wire.

Explanation:

I hope that was useful.

Answer:

reactants : before arrow sign

: CH4 and O2

product : after arrow sign

: CO2 and H2O

the answer is the second option

Answer:

0.54 J/goC

Explanation:

Recall that we define the heat transferred as ;

H= mcθ

Where;

H= heat transferred = 112300J

m= mass of the metal= 240g or 0.24 Kg

c= specific heat capacity of the metal = the unknown

θ= change in temperature = (880°C-13°C) = 867°C

Substituting values and making the specific heat capacity the subject of the formula;

c= H/mθ

c= 112300/ 240×867

c= 0.54 J/goC

Hence, the specific heat capacity of the metal is 0.54 J/goC.

Answer:

The outermost shell of helium for example is filled with only two electrons. Hydrogen and lithium become stable by acquiring the electronic configuration of the nearest inert gas, which is helium. This is the duplet (or duet) rule.

Explanation:

Answer:

This is because Corn is grown on land and has important values to man .These values include as a source of food for man and animals. It is also used as raw materials for the production of certain goods such as flour etc.

It is an energy resource because fermentation of corn gives rise to ethanol fuel which is used as a source of power to run machines and other equipment.

Answer:

A. 1s²2s²

B. 1s²

C. 1s²

D. 1s²2s²2p⁶

Explanation:

The valency electron is the outer electron of an element. The valency electron resides in the outermost region of the shell.

Using the general configuration for the first 20 elements 2 8 8 2 the valency electrons can be identified.

A. 1s²2s²2p⁶3s² . The valency electron here are 2p⁶ and 3s² . Removing the valency electron we have 1s²2s²

B. 1s² 2s² 2p⁶. After removing the valency electron the configuration will be 1s².

C.1s²2s². After removing the valency electron the configuration will be 1s²

D.1s²2s²2p⁶3s¹. Removing the valency electron the electron configuration will be 1s²2s²2p⁶

Answer:

They are all alkali earth metals.

Explanation:

Their valence shell each has 2 electrons. Also, they are all shiny, silvery-white, somewhat reactive metals at standard temperature and pressure. They form alkaline solutions, hydroxides, when reacting with water and their oxides are found in the earth’s crust.

Answer:

magnesium (Mg)

Explanation:

Answer:

P = 2,8,3

q = 2,8,6

Explanation:

Because the first shell contain 2 electron and the 2nd contain 8 electron and the last shell contain the electron which is left

Explanation:

p=1s^2,2s^2,2p^6,3s^2,3p^1

q=1s^2,2s^2,2p^6,3s^2,3p^4

the quantum numbers are used in my answer.

there are 4 quantum numbers.

1.principal quantum numbers

2.angular momentum quantum numbers

3.magnetic quantum numbers

4.spin quantum numbers

In this case,the angular momentum quantum numbers is being used.it describes the unique quantum state of an electron and is designated by the letter L.this behaviour manifests itself as the shape of the orbital.electron shells have distinct shapes denoted by letters,s,p,d,f.

l can be numbers like,0,1,2,3

the maximum electrons in each letter is,

s=2

p=6

d=10

f=14

the shapes of the sub_shells

s sub_shell is spherical

p sub_shell is two dumb_bells

d sub_shell is four dumb_bells

f sub_shell is eight dumb_bells