Answer:ur right I think
Explanation:
Answer:
HON, i'm going to be honest, i'm not sure but it sounds like it is the Universal Expansion from what I learned about space
I'm sure this helps but if it doesn't DON'T GIVE ME BRAINLIEST, if it does then do
How does an increase in thermal energy affect the kinetic energy of the particles in each state of matter
Explanation:
when there is an increase in thermal energy, the kinetic energy if the matter increases as well.
A car travels at 12 m/s. The car then accelerates at 3 m/s2 until it reaches a speed of 18m/s.
Use the formula: (final velocity)2 – (initial velocity)2 = 2 x acceleration * distance
Calculate the distance the car travels.
A
2 m
B
6 m
С
30 m
D
60 m
Answer:
С. 30 m
Explanation:
Given the following data;
Initial velocity, U = 12m/s
Final velocity, V = 18m/s
Acceleration, a = 3m/s²
To find the distance, we would use the third equation of motion;
V ² = U² + 2aS
Substituting into the equation, we have
18² = 12² + 2*3*S
324 = 144 + 6S
6S = 324 - 144
6S = 180
S = 180/6
Distance, S = 30 meters.
Skyscrapers are made of concrete and glass, concrete and glass are made of sand,so that makes skyscrapers giant sandcastles. Change my mind
Awnswer:
what are the answer chosices
Explanation:
how are electromagnetic waves produced
Answer:
Electromagnetic waves are created by oscillating charges (which radiate whenever accelerated) and have the same frequency as the oscillation. Since the electric and magnetic fields in most electromagnetic waves are perpendicular to the direction in which the wave moves, it is ordinarily a transverse wave.
Answer: Electromagnetic waves are the combination of electric and magnetic field waves produced by moving charges.
The creation of all electromagnetic waves begins with a charged particle. This charged particle creates an electric field (which can exert a force on other nearby charged particles). When it accelerates as part of an oscillatory motion, the charged particle creates ripples, or oscillations, in its electric field, and also produces a magnetic field (as predicted by Maxwell’s equations).
Once in motion, the electric and magnetic fields created by a charged particle are self-perpetuating—time-dependent changes in one field (electric or magnetic) produce the other. Both electric and magnetic fields in an electromagnetic wave will fluctuate in time, one causing the other to change.
Electromagnetic waves (photons) are produced anytime a charged particle experiences a change in velocity.. The electromagnetic wave (radiation) that is produced when the charge particle changes it’s velocity is how energy is conserved. This energy is light.
Hope this helps have a awesome day/night❤️✨
Explanation:
What is the object’s average acceleration between 0.0 s and 5.0 s?
ANSWER FAST! PLEASEE
Answer:
[tex]2.5[/tex]
Explanation:
[tex]0.0+5.0=5.0[/tex]
[tex]\frac{5}{2} =2.5[/tex]
hope this helps!!!!!!!!!!
PLEASE HELP ASAP!!!
Answer:
WRITE A ONE PAGE ESSAY TO EXPLAIN THE AUTHOR'S PURPOSE IN WRITING HOM SMART ARE ANIMAL
Explanation:
A canoe moving down the river with a kinetic energy of 5J and a speed of 0.5m/s. What’s the mass of the canoe
How do vaccines provide immunity
Answer:
Vaccines contain weakened or inactive parts of a particular organism (antigen) that triggers an immune response within the body. Newer vaccines contain the blueprint for producing antigens rather than the antigen itself.
Answer: They give you a portion of the thing its fighting so it gets your cells use to it so they can fight it off easily
Explanation:
Elements with positive valences usually ______ electrons
A. Donate
B. Accept
C. Have no
D. Create
Which phrase best describes a machine?
any device that makes work easier
any device that moves an object
any device that has multiple parts
any device that uses energy
describe the steps that occurs in the process of fission
Answer:
--In the first step, a uranium-235 atom absorbs a neutron, and splits into two new atoms (fission fragments), releasing three new neutrons and a large amount of binding energy. -- In the second step, one of those neutrons is absorbed by an atom of uranium-238, and does not continue the reaction.
OR
Nuclear fission begins when a neutron hits the nucleus of an atom. The nucleus splits in two and releases thermal energy and releases more neutrons. The neutrons hits the nuclei of more atoms, splitting them and releasing more energy and neutrons.
I hope this helps!!
Use Gauss's Law to find the electric field produced by an infinite plane of uniformly distributed charge Q, with charge density σ. Draw the appropriate Gaussian Surface
Answer:
Explanation:
Consider an endless sheet of uniform charge thickness per unit area [tex]\sigma[/tex]
For a boundless sheet of charge, the electric field will be opposite to the surface. In this way, just the closures of a round and hollow Gaussian surface will add to the electric transition. For this situation, around and hollow Gaussian surface opposite to the charge sheet is utilized. The subsequent field is a large portion of that of a conductor at harmony with this surface charge thickness.
By balance, we expect the electric field on one or the other side of a plane to be an element of x just to be guided typical to the plane and to point away from/towards the plane contingent upon whether, [tex]\sigma[/tex] is positive/negative.
According to the law;
[tex]2EA = \dfrac{q_{enc}}{\varepsilon_o}[/tex]
[tex]where; \ q_{enc} = total \ enclosed charge = \sigma A \\ \\ thus; \\ \\ 2EA = \dfrac{\sigma A}{\varepsilon_o} \\ \\ E = \dfrac{\sigma}{2 \varepsilon _o}[/tex]
I got stuck on this question
Answer it 2n
Explanation:
Use the picture to answer the question below-
Which change in wave properties would show as an increase in amplitude?
H E L P P P P
What happens when a pebble lying on the ground is kicked?
A. Energy is completely lost.
B. Energy is created.
C. Energy is destroyed.
D. Energy is transferred.
Answer:
I'm 100% sure it's D. but if it isn't, sorry :(
What is the speed of a 180 g ball if its kinetic energy is 100 J?
Answer:
Velocity, V = 33.33 m/s
Explanation:
Given the following data;
Mass = 180grams to kilograms = 180/1000 = 0.18 kg
Kinetic energy = 100J
To find the speed;
Kinetic energy can be defined as an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
[tex] K.E = \frac{1}{2}MV^{2}[/tex]
Where;
K.E represents kinetic energy measured in Joules.
M represents mass measured in kilograms.
V represents velocity measured in metres per seconds square.
Substituting into the equation, we have;
100 = ½*0.18*V²
Cross-multiplying, we have;
200 = 0.18*V²
V² = 200/0.18
V² = 1111.11
Taking the square root of both sides, we have;
Velocity, V = 33.33 m/s
which material would you select to replace broken handle of electric kettle
please will mark as brainlist
Answer:
hot glue
Explanation:
-insert the hot melt cylinder into the gun and wait until it heats up;
-gently apply a layer of substance to the crack;
-spread the hot glue in a thin layer over the surface;
-wait until it freezes.
What type of Circuit do they use in a home? WHY ? (Simple circuit / Parallel circuit / Series circuit)
Answer:
Parallel Circuits
Explanation:
Loads can be operated on their own. If you had a series circuit, adding another light would dim the rest!
which of the following is an example of potential energy:
(choose 2)
- a fire
- a book standing still on a shelf in the library
- a printer that is not connected
- your cellphone, when you make a call to someone
Answer:
fire is a potential energy
Narcotics are highly addictive and affect the driver's
Oa) decision making
Ob) vision
Oc) motor skills
Od) all of the above
Answer:
D
that's should be the answer
What's a real-life example of Newton's Second Law?
Why would geothermal energy NOT be a possible energy source for many regions of the country?
A. Geothermal energy depends upon a nonrenewable resource.
B. Geothermal energy is only found in Arctic regions.
C. Geothermal energy is not always found in an area that is easily accessible.
D. Geothermal energy can only be used to grow tropical fruits.
Geothermal energy is not always found in an area that is easily accessible. (C)
Geothermal energy is not a possible energy source for many regions of the country. Because geothermal energy is not always found in an area that is easily accessible. Option C is correct.
What is geothermal energy?Geothermal energy is the thermal energy in the Earth's crust that comes from the planet's creation and the radioactive decay of components in nearly equal amounts.
The disadvantage of using the geothermal energy is;
A. It is available only in limited areas.
B. It can cause air and groundwater pollution.
C. It is difficult to transport from place to place.
Geothermal energy is not a possible energy source for many regions of the country . Because geothermal energy is not always found in an area that is easily accessible.
Hence, option C is correct.
To learn more about the geothermal energy, refer to the link;
brainly.com/question/1061324
#SPJ2
As a cold air mass advances on a warm air mass, what usually comes before it?
Answer: A cold front occurs when a cold air mass advances into a region occupied by a warm air mass. If the boundary between the cold and warm air masses doesn't move, it is called a stationary front.
Explanation: Two types of occluded front exist: the warm-type and the cold-type. They’re distinguished by the relative temperatures of the air mass ahead of the occlusion – in other words, the air mass ahead of the original warm front – and the air mass behind the cold front. If the air behind the cold front is colder than the air ahead of the occlusion, it shoves beneath that air (because it’s denser) to form a cold-type occluded front. If the air behind the cold front is warmer than the air ahead, it rides over it to form a warm-type occluded front – which appears to be the more common case. In either situation, the lighter warm air representing the air mass originally between the warm and cold fronts sits above the boundary between the two cooler air masses.
Hope this helps!!
Calculate the efficiency of a hairdryer that has a total power input of 2000W and a useful power output of 1200W.
In what do electromagnetic waves cause disturbances when they transfer
energy?
A. Electric fields only
O B. Both electric and magnetic fields
C. Neither electric nor magnetic fields
O D. Magnetic fields only
Which can make 4 covalent bonds? Carbon, Silicon, or both?
Answer:
I would say both
Explanation:
Each silicon atom has four valence electrons which are shared, forming covalent bonds with the four surrounding Si atoms.
Carbon contains four electrons in its outer shell. Therefore, it can form four covalent bonds with other atoms or molecules. The simplest organic carbon molecule is methane (CH4), in which four hydrogen atoms bind to a carbon atom (Figure 1).
100%
Sutt S
Kam Scheela MARIO MARTINEZ-HTPhysics.pdf
Test BGK
HW#10
Question: A pinball machine's plunger has a spring constant of 22
N/m and is compressed by 0.04 m to start a 0.006 kg pinball.
1. What is the elastic potential energy before the ball is released?
2. What is the kinetic energy of the pinball the instant it leaves the
spring?
3. What is the speed of the pinball the instant it leaves the spring?
4. If the pinball is moving at 1.3 m/s as it is deflected horizontally
across the top of the pinball machine, how much higher above the
ground is this part of its path when compared to its starting
position?
Squation
Drawing
Ta
Signature
Instructions.
Answer:
1. The elastic potential energy is 0.0176 Joules
2. The kinetic energy of the pinball the instant it leaves the spring is 0.0176 Joules
3. The speed of the pinball the instant it leaves the spring is approximately 2.42212 m/s
4. The height of the part where the pinball is located on the machine above the ground is approximately 0.213 meters
Explanation:
The spring constant of the pinball machine's plunger, k = 22 N/m
The amount by which the pinball machine's plunger is compressed, x = 0.04 m
The mass of the pinball ball, m = 0.006 kg
1. The elastic potential energy, P.E. = 1/2·k·x²
By substitution, we get;
P.E. = 1/2 × 22 N/m × (0.04 m)² = 0.0176 J
The elastic potential energy, P.E. = 0.0176 J
2. At the instant the pinball leaves the spring, the plunger and therefore the force of the plunger no longer acts on the pinball
Since there are no external forces acting on the pinball to increase the speed of the pinball after it leaves the spring, the velocity reached is its maximum velocity, and therefore, the kinetic energy, K.E. is the maximum kinetic energy which by the conservation of energy, is equal to the initial potential energy
Therefore;
K.E. = P.E. = 0.0176 J
The kinetic energy of the pinball the instant it leaves the spring, K.E.= 0.0176 J
3. The kinetic energy, K.E., is given by the following formula;
K.E. = 1/2·m·v²
Where;
v = The speed or velocity of the object having kinetic energy K.E.
Therefore, from K.E. = 0.0176 J, and by plugging in the values of the variables, we have;
K.E. = 0.0176 J = 1/2 × 0.006 kg × v²
v² = 0.0176 J/(1/2 × 0.006 kg) = 88/15 m²/s²
v = √(88/15 m²/s²) ≈ (2·√330)/15 m/s ≈ 2.42212 m/s
The speed of the pinball the instant it leaves the spring, v ≈ 2.42212 m/s
4. The height of the pinball is given by the following kinematic equation of motion;
[tex]v_h[/tex]² = u² - 2·g·h
Where;
[tex]v_h[/tex] = The velocity of the pinball at the given height = 1.3 m/s
u = v ≈ 2.42212 m/s (The initial velocity of the pinball as it the spring)
g = The acceleration due to gravity ≈ 9.8 m/s²
h = The height of the pinball above the ground
We get;
[tex]v_h[/tex]² = 1.3² = 2.42212² - 2 × 9.8 × h
∴ h = (2.42212² - 1.3²)/(2 × 9.8) ≈ 0.213
The height of the part where the pinball is located on the machine above the ground, h ≈ 0.213 m
pls help, i really dw fail :(
Answer:
Using the Newton equation
V²=U² +2as
Given; V=9.2m/s U = 0m/s( because it starts from rest)
S=26.2m.
9.2²=0²+2(26.2)a
a =9.2²/2(26.2)
a=84.6/52.4
a=1.60m/s²
Answer:
2.A
3.D
Explanation:
HOPE THIS HELPS!! :)
Which of the following instruments measures time most accurately?
a. Sundial
b. quartz watch
c. pendulum clock
d. watch with balance wheel
Answer:
b) Quartz Clock
Explanation:
It's is a very type of clock which uses the vibration of quartz crystals to measure time accurately
Explain in detail what you would experience
throughout the year if the axis of the Earth was not
tilted.
Explanation:
Scientists think an Earth without a tilt would be stratified into climate bands that would get progressively colder as you moved away from the equator. Humans would never survive the continuous winter of the high latitudes, and so we would likely congregate in the planet's tropical midsection.
I hope it's helpful!