Green plants use light from the sun to drive photosynthesis, a chemical reaction in which liquid water and carbon dioxide gas form aqueous glucose.

The mass percent of mgcl2 in the mixture is 50.3%, a solid mixture contains mgcl2 and nacl. when 0.500 g of this mixture is dissolved in enough water to form 1.00 l of solution is 0.4033.

What is osmotic pressure?

The highest pressure that can form in a solution when it is isolated from a solvent by a membrane that is permeable solely to the solvent. Osmosis pressure is dependent on molar concentration and absolute temperature.

What is mass?

A substance or object's mass is a measurement of how much matter there is in it. Smaller masses can be measured in grams instead of kilograms (kg), which is the standard SI unit for mass (g).

Given, mass of mixture= 0.5000

Osmatic pressure of solution = 0.3950

Nacl and mgcl2 are strong electrolyte and completely dissociate.

hence, vant roff factor for Nacl =2

vant roff factor for mgcl2= 3

let amount of Nacl= xgm

amount of Mgcl2= (0.500-x) gm

o.p. for Nacl= i * wt. of substance * l T/ mol. wt. * vol. of sol in litre

= 2*x*0.0021*290/50.5*1

=0.0364x

o.p. for Mgcl2 = 3* (0.500-x) * 0.0021* 29.0/95*1

=0.7725x

o.p. of solution = 0.3950 atm ( given)

Then,

0.3950= 0.364x+ 0.7725x

0.3950=  1.6009x

0.3950/ 1.6009 = x = 0.2455gx

mass of Nacl2= 0.2455gx

mass of Mgcl2 = 0.5000- 0.2455

= 0.2545gx

% mass of Mgcl2 = mass of Mgcl2/ total mass

=0.2545/0.5000 *100

=50.3%

vapor pressure of pure A= 350 torr

vapor pressure of pure B = 100 torr

let mole fraction of A= x

let mole fraction of B = (1-x)

vapor pressure of solution as equilibrium = 2* mole fraction of A

= 2x

Now according to raoults law

Pa = Pa*mf of A

Pb = Pb* mf of B

vapour pressure of a solution

(Pa+Pb) = (Pa*mf of A) + (Pb* mf of B)

= 2x= (350*x)+100x (1-x)

2x= 350x+100-100x

2x=250x+100

248x= 10

x= 100/248

x= 0.4032

x=0.4033

Therefore, mass percent of mgcl2 in the mixture is 50.3%, a solid mixture contains mgcl2 and nacl. when 0.500 g of this mixture is dissolved in enough water to form 1.00 l of solution is 0.4033.

Learn more about osmotic pressure from the given link.

https://brainly.com/question/25904085

#SPJ4

.

From the substances given, we can classify them as an electrolyte or a non-electrolyte as stated below:

Electrolyte:

Non-electrolyte:

Electrolytes are some substances that can release electrical charges in the form of cations (positive charge) and anions (negative charge). These electrical charges move freely in the aqueous form as a soluble ionic solution. The freely-moving molecules can conduct electricity. On the other hand, non-electrolytes do not contain anions and cations. Hence, they cannot conduct electricity.

Learn more about electrolytes here https://brainly.com/question/29346270

#SPJ4

chloroform has a standard energy of vaporization of 31. 4 kJ/mol and a standard entropy of 93. 7 j/mol/K, the standard enthalpy of vaporization chloroform is 335K.

Set the Gibbs free energy of vaporization delta G = delta H minus T delta S = 0 if the enthalpy of vaporization delta H and the entropy of vaporization delta S are known (for a large number of substances, they are available in tables). The boiling point's temperature is thus given by T = delta H/delta S.

The Boiling Point Formula Kb is frequently calculated using the formula Kb = RTb2M/Hv, where R is the universal gas constant. Tb is the pure solvent's boiling point (measured in K), and M is the solvent's molar mass.

Learn more about chloroform here:

https://brainly.com/question/13334667

#SPJ4

When the concentration of nitrogen monoxide is doubled and the concentration of chlorine is cut in half, the reaction is second order in nitrogen monoxide, NO.

Is NOx equivalent to NO2?

Nitric oxide (NO), an odorless, colorless gas, and nitrogen dioxide (NO2), a reddish-brown gas with an offensive odor, are the two gases that are typically referred to as "nitrogen oxides" (NOx). Nitrogen dioxide is created when nitric oxide combines with oxygen or ozone in the atmosphere.

N2O is a laughing gas, right?

A non-flammable, colorless, and odorless gas is nitrous oxide. Despite not being flammable, nitrous oxide will nonetheless facilitate combustion to the same degree as oxygen. It produces a mood of exhilaration, therefore the moniker "laughing gas." The least effective inhalational anesthetic is nitrous oxide.

To know more about nitrigen monoxide visit:

https://brainly.com/question/1328380

#SPJ4

The process is a change of state, dissolving, or a chemical reaction, the total mass of the substances does not change.

French chemist Antoine Lavoisier established the law of conservation of mass in 1789. According to the rule of conservation of mass, a chemical process cannot generate or destroy matter.

For instance, when wood burns, the mass of the gases, soot, and ashes is equal to the amount of the charcoal and oxygen before the reaction began. Thus, the mass of the reactant and the mass of the product are equal. A product is the material created as a result of a chemical reaction, whereas a reactant is the chemical reaction of two or more elements to create a new substance. Although matter and the associated mass cannot be generated or destroyed, they can change into other substances such as liquids, gases, and solids.

Hence, the process is a change of state, dissolving, or a chemical reaction, the total mass of the substances does not change.

To learn more about states of matter refer- https://brainly.com/question/16982523

#SPJ4

The efficacy of the kidney's capacity to correctly maintain the serum metabolic pH is reflected in the serum bicarbonate (HCO3-).

What does serum bicarbonate (HCO3-) mean?

Serum bicarbonate (HCO3-) is a measurement of the amount of bicarbonate ions in blood, which aid in controlling blood pH. It is normally assessed as part of a standard blood test and is used as an indicator of acid-base balance. Dehydration, renal or liver illness, metabolic acidosis, and other medical problems can all be indicated by abnormal serum bicarbonate levels.

What is Serum metabolic ph?

A measurement of the blood's acidity or alkalinity is the serum metabolic pH. It is usually assessed as a component of a thorough metabolic panel, a kind of blood test. The range of the serum metabolic pH normal values is 7.35 to 7.45.

To know more about Bicarbonate (HCO3-), visit:

https://brainly.com/question/8560563

#SPJ4

A 15.0 ml solution of Ba(OH)₂ is neutralized with 30.3 ml of 0.200 m HCl. the neutralized of the original Ba(OH)₂ solution is 0.2M

The reaction is given as follows :

Ba(OH)₂   +   2HCl   ---->  BaCl₂   +   2HCl

concentration of HCl , molarity = 0.200 M

volume = 30.3 mL = 0.030 L

moles of HCl = molarity × volume

                      = 0.200 × 0.030

                      = 0.006 mol

moles of Ba(OH)₂   = 1/2 moles of HCl

moles of Ba(OH)₂   = 1 /2 × 0.006 = 0.003 mol

molarity of Ba(OH)₂ = moles / volume

                                 = 0.003 / 0.015

                                 = 0.2 M

The concentration of Ba(OH)₂ = 0.2 M

To learn more about concentration here

https://brainly.com/question/15737881

#SPJ4

Predict how many electrons a certain metal atom loses to form an ion in an ionic compound we use the column that they are in to know how many valence electrons they have.

Ferrous metals, which include iron, and non-ferrous metals, which do not, are the two basic categories into which metals can be separated. Pure iron is too soft and ductile to be much use as just an engineering material.

Lithium, Beryllium, Sodium, Mg, Aluminum, Potassium, & Calcium are the metals within the first twenty elements. The first 20 elements' non-metals are currently Hydrogen, Helium, Carbo, Nitrogen, Oxygen, Fluorine, and Carbon.

To know more about metal visit:

https://brainly.com/question/12708186

#SPJ4

Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, the specific heat and identity of the sample is +0.89 J/g°C and aluminum respectively.

Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.

Mathematically,

Enthalpy=mass of unknown metal× specific heat capacity of unknown metal× Change in temperature

mass of unknown metal=16.9 grams

specific heat capacity of unknown metal=?

Change in temperature=final temperature - initial temperature

=318-298.7

= 20K

enthalpy=1.521×10²J

Substituting all the given values in the above equation, we get

1.521×10² =16.9 × specific heat capacity of unknown metal×20

3510 =3,910.68× specific heat capacity of unknown metal

specific heat capacity of unknown metal=-0.89J/g°C

Therefore, the specific heat and identity of the sample is +0.89 J/g°C and aluminum respectively.

To know more about enthalpy, here:

https://brainly.com/question/24170335

#SPJ1

A medal in a 1.5 index of refraction plastic cube seems to be 20 mm below the cube's upper surface. The medal is actually 30mm deep inside the acrylic cube

It looks that a medal in a plastic cube is 20 mm below its upper surface.

Equation

Appearance depth is 20mm

Let's say the real depth of the medal in the plastic cube is h.

We know that

real depth/apparent depth =the plastic's refractive index in relation to the air.

H/20 mm

= 1.5 H

= 20 mm x 1.5 mm

= 30.0 mm

Thus, the medal's real depth inside the plastic cube is 30 mm.

Refraction: What Is It?

Refraction is the bending of a wave as it travels through different media. The two materials' different densities are what lead to the bending.

To know more about refraction, visit to: -https://brainly.com/question/14760207

#SPJ4

Fermentation is a chemical reaction that takes Byproducts of fermentation may include .

fermentation, chemical system with the aid of which molecules along with glucose are broken down anaerobically. more widely, fermentation is the foaming that happens at some point of the manufacture of wine and beer, a manner at least 10,000 years antique.

Fermentation is a metabolic technique wherein an organism converts a carbohydrate, which includes starch or a sugar, into an alcohol or an acid. as an example, yeast performs fermentation to acquire energy by means of changing sugar into alcohol. micro organism carry out fermentation, changing carbohydrates into lactic acid.

Each types of fermentation require  primary components, a sugar supply and a bacterial culture; alcohol fermentations use types of yeast, at the same time as lactic acid fermentation generally relies on lactic acid bacteria.

Learn more about Fermentation  here:

https://brainly.com/question/1333936

#SPJ4

Answer:10-5mol/l

In the same way, a solution with a pH of 5 contains 10-5mol/l of hydrogen ions, a solution with a pH of 6 contains 10-6mol/l of hydrogen ions, while the solution with a pH of 7 contains 10-7mol/l of hydrogen ions.

Explanation:

the electrons in the chemical bond links remain located between two atoms. electrons in covalent bonds can be relocated between more than two atoms.

The most significant type of bonding in organic chemistry is covalent bonding. Atoms sharing some electrons leads to the creation of a covalent bond. Two atomic orbitals touching one other form the bond [1]. Figures 3-4 depict this procedure. Each shared electron in this kind of relationship counts toward the valence shells of both atoms in order to meet the octet rule. Each atom contributes one electron to a pair of electrons that are shared in a single bond. Three pairs of electrons are shared by triple bonds, while two pairs are shared by double bonds. Several covalent bonds are bonds that share multiple electron pairs.

Chemical bonds are formed when the atoms in a compound's molecule are brought together and kept together by a powerful combining force. Ionic and covalent bonds are the two different types of chemical bonds.

learn more about ionic bonds visit:

https://brainly.com/question/977324

#SPJ4

The intermolecular forces act between a chloramine (nh2cl) molecule and a potassium cation is Dipole to Dipole bonding.

What is an example of a dipole-dipole interaction?

A dipole-dipole interaction can occur between polar molecules such as hydrogen chloride (HCl), carboxylic acids (i.e., acetic acid), and amino acids. The positive end of a polar molecule will attract the negative end of the other molecule and alter its location.

What is  Dipole to Dipole bonding?

Dipole to Dipole force arise when atoms with partial charges within a molecule attract another atom with an opposite partial charge that is located around the molecule.

Therefore,

Because chloroamine and water are both polar solvents, hydrogen bonds, dispersion forces, and dipole-dipole forces of attration exist between them. Water molecules form hydrogen bonds.

Hence Dipole to Dipole bonding is a correct answer.

To know more about Dipole to Dipole bonding follow link

https://brainly.com/question/6437689

#SPJ4

Of the following given compound or couples KF/HF, Na^CO3/NaHCO3 are the  buffer systems as they consist of both weak base or acid.

Buffer systems is the acid-base homeostatic mechanism. It is helpful in maintaing the pH in blood by balancing the carbonic acid, bicarbonate ion, and carbon dioxide .

Buffer systems are made of weak Base-acid mixed with its conjugate base-acid dissolved in water. The conjugate acid-base should be from its Salt.

Hence, Of the following given compound or couples KF/HF, Na^CO3/NaHCO3 are the  buffer systems as they consist of both weak base or acid.

To know more about buffer system visit

https://brainly.com/question/22821585

#SPJ4

Nitric oxide weighs 0.77 grams and is created by the reaction of 1.37 grams of ammonia.

Chemical elements, like oxygen, are compounds that only have one type of atom. An oxygen atom has 8 protons through its nucleus, which is why it has an electron density of eight and the chemical symbol O. At ambient temperatures, oxygen is a colorless, odorless gas.

The equation for the reaction of ammonia and oxygen to produce Nitric oxide and water is,

4NH₃ + 5O₂ → 4NO + 6H₂O

From the reaction we can see,

4 moles of ammonia = 4 moles of nitrix oxide.

Mole of ammonia = moles of nitric oxide.

Moles = reacted/formed mass/ molar mass

Molar mass of ammonia = 17 g/mol.

Molar mass of nitric oxide = 30 g/mol.

Mass of ammonia reacted = 1.37 grams.

Putting values,

1.37 x 17 = Formed mass of nitric oxide x 30

Formed mass of nitric oxide  = 0.77 grams.

The mass of nitric oxide formed is 0.77 grams.

To know more about Oxygen visit,

https://brainly.com/question/13370320

#SPJ4

A collection of answer options that results in h+ in the solution is the bronsted-lowry definition of a base. a proton acceptor that generates oh in a solution. bronstted - lowry Acid and base definition.

Proton donation is carried out by acid. Base is a material that can take in protons. So, based on the foregoing Definition, option B is right. A base, which is the complementary particle to an acid, is also known as a proton acceptor. A base, according to the Broensted-Lowry definition, is a negatively charged ion that can react with or receive a positively charged hydrogen ion. Any hydrogen-containing material that has the ability to give another substance a proton (hydrogen ion) is considered an acid. An entity that can accept a hydrogen ion is known as a base.

Learn more about proton acceptor here

https://brainly.com/question/1252435

#SPJ4

In this problem we are given values of Wα and WFe3C for an iron-carbon alloy (0.88 and 0.12,respectively), and then are asked to specify whether the alloy is hypoeutectoid or hypereutectoid.

Employment of the lever rule for total α leads to

W[tex]\alpha[/tex] = 0.88 =  [tex]\frac{CFe3C- C0}{CFe3C - \alpha }[/tex] = [tex]\frac{6.70 -C0}{6.70- 0.022}[/tex]

Now, solving for C0, the alloy composition, leads to C0 = 0.82 wt% C. Therefore, the alloy is hypereutectoid since C0 is greater than 0.76 wt% C.

What is the protectoid phase?

The term proeutectoid refers to a phase that develops (on cooling) before eutectoid austenite decomposes. It is similar to primary solids in that it is the first phase to solidify after the austenite phase has solidified.

How do you find the Proeutectoid phase?

On a phase diagram, the proeutectic point is the temperature at which the mixture transforms into a mixture of two solids. There are two proeutectic temperatures. One happens at 1587°C, where everything over this temperature is liquid.

Hence above given is a correct answer.

To know more about Proeutectoid phase follow link

https://brainly.com/question/10053141

#SPJ4

The increasing order of carbon-carbon bond strength is H_3CCH_3<H_2CCH_2< HCCH and the decreasing order of carbon-carbon bond length is H_3CCH_3 > H_2CCH_2 >  HCCH.

The number of chemical bond between pair of atoms is termed as its Bond order.

For Example,

HCCH i.e. H−C≡C−H has three pairs of bond hence its bond order is 3.

The distance between the centers of two covalently bonded atoms is known as its Bond length.

The Increasing order of bond length is generally the :

3 bond < 2 bond < 1 bond.

To know more about bond order visit

https://brainly.com/question/1686358

#SPJ4

d electron count can exhibit both high-spin and low-spin states in an octahedral complex is d⁶

high spin complex is a complex ion with more unpaired electrons in the d orbitals of the central atom. These ions are known to be paramagnetic.

low spin complex ion is a complex known to have electron pairs at low energy levels.

High-spin and low-spin complexes are characterized based on their magnetic moments.

If the configuration of the complex has an unpaired electron, it is said to be a high-spin complex. If the unpaired electron is missing, the complex is called low-spin.

There are two types of ligands approaching the central metal ion: strong electric fields and weak electric fields. In both cases, the d-orbital splitting is different. In case of strong electric field Δ>P

For weak electric field Δ

where Δ is the crystal field splitting

When. P is the pairing energy

Only d⁶ type electron configurations can display both High Spin (HS) and Low Spin (LS).

d⁶(strong)= t₂⁶g gives LS

d⁶(weak)= t₂⁴g eg³ gives HS

Therefore, only the d 6 electron configuration can give rise to both LS and HS complexes in the presence of strong and weak ligand fields, respectively.

Click here for more information on electron configuration

Brainly.com/question/26084288

#SPJ4

The element which has the largest atomic radius is Aluminium. Therefore, the correct answer is option A- Al has the largest atomic radius.

We are aware that when atomic number increases, the number of shells also rises and, consequently, does atomic radius down a group in the periodic table. Along a period, as the atomic number rises, the nuclear charge rises as well, leading to an increase in the nuclear force of attraction. As a result, atomic radius shrinks over time.

Since the third period is below the second period, it will have a bigger atomic radius than the second period.

In the periodic table, aluminum and boron both belong to the same group. Atomic radius tends to rise from top to bottom within a group, according to this trend. The fact that aluminum is included in the periodic table below boron indicates that it has a bigger atomic radius than boron.

Hence, Aluminium has the largest atomic radius among the given options.

To learn more about atomic radius refer- https://brainly.com/question/12131433

#SPJ4

The metabolite 11 nor tetrahydrocannabinol 9 COOH can be detected by immunoassay 3-5 days after a single use of marijuana.

The use of an antibody or an antigen as a biorecognition agent allows for the highly selective bioanalytical technique known as an immunoassay to detect the presence or concentration of analytes ranging in size from small molecules to macromolecules in a solution.

Immunoassay assays are biochemical procedures that use the antigen-antibody response theory to diagnose illness. It seeks to determine both an analyte's concentration and presence. Immunoassay testing is used by scientists and medical practitioners to find various antibodies Metabolite 11 nor tetrahydrocannabinol 9 COOH is also identified by this.

For more questions like Immunoassay click the link below:

https://brainly.com/question/27922697

#SPJ4

An aqueous ethanol solution (400 mL) was diluted to 4.00 L, giving a concentration of 0.0400 M. The concentration of the original solution was  0.400 M.

Given:

ethanol solution V₁ = 400 ml

concentration M₂ = 0.0400 M

volume of diluted ethanol V₂ = 4.00 L = 4000 ml

concentration of original solution = M₁ = ?

Formula used:

Dilution is the process of decreasing the concentration of a solute in a solution, usually simply by mixing with more solvent like adding more water to the solution.

in this case, we need to use the dilution formula

M₁V1 = M₂V₂

M₁ = initial molarity

v1 = initial volume in liters

M₂ = final molarity

V₂ = final volume in liters

Solution:

using the dilution formula:

M1 × 400 = 0.04 × 4000

M1 =[tex]\frac{0.04 * 4000 }{400}[/tex]

    = 0.400 M

Hence 0.400 M is a correct answer.

To know more about dilution follow link

https://brainly.com/question/21323871

#SPJ4

The electron-pair geometry around the S atom in SO[tex]_{3}[/tex] is Trigonal Planar as there is Zero(0) lone pairs around the S atom.

What is electron-pair geometry?

The electron pair arrangement determines the spatial arrangement of bonds and lone pairs within a molecule. VSEPR theory is used to calculate the shape of molecules according to the arrangement of electron pairs around a central atom.

VSEPR theory states that electron pairs repel each other around the central atom and are placed as far apart as possible.

Molecular geometry is described as the 3D arrangement of atoms within a molecule, usually relative to a single central atom. Electron geometry, on the other hand, is the 3D arrangement of electron pairs around a central atom, whether bonded or unbonded.

A lone (non-bonded) pair refers to a pair of valence electrons that are not shared with another atom in a covalent bond, and a bond pair is a pair of electrons present in a bond.

Therefore, The electron-pair geometry around the S atom in SO[tex]_{3}[/tex] is Trigonal Planar.

To know more about electron-pair geometry, check out:

https://brainly.com/question/1458198

#SPJ4

Well here i can't draw the diagram for the curved arrow mechanism for the given reaction including the carbocation rearrangement step.

Carbocation is simply the positively (+ivly) charged carbon ions.

Examples of carbocation are:

Curved arrow mechanism are the mechanism in which to represent electron flow instead of linear arrow, curved arrows are used. The origination of the electron is indicated by the tail of the curved arrow. The movement of two electrons is represented by double barbed arrow.

To know more about carbocation visit

https://brainly.com/question/13164680

#SPJ4

This reaction's molecular equation is NaF(aq) + HCl(aq) ==> NaCl(aq) + HF (aq) Because HF is a weak acid, we won't ionize it and will instead write the following net ionic equation: H+(aq) plus F-(aq) equals HF (aq)

By dissolving all soluble ionic chemicals (those denoted with a (aq)) into their corresponding ions, the ionic equation can be written. To demonstrate that an ion is present in solution, it should be displayed with its charge and a (aq). To display the quantity of each ion present, use coefficients.

A chemical equation known as a net ionic equation only includes the ions that are undergoing chemical change as the reaction progresses.

Learn more about chemical equation here:

https://brainly.com/question/28294176

#SPJ4

An alcohol is created when an alkene undergoes treatment with hg(oac)2 in ch3oh, followed by a reaction with nabh4.

What are the uses of alkene?

Introduction. One of the most adaptable chemical building blocks, alkenes are essential to numerous synthetic reactions. Alkene reactants are used in hydrofunctionalization processes such olefin hydroalkoxylation and hydroamination, which is a very active area of catalysis.

Alkene vs. alkane: what are they?

Alkanes are saturated hydrocarbons because they only have one bond between the carbon atoms. Alkenes have at least one double bond between carbon atoms. Alkynes have one or more triple bonds between carbon atoms. Unsaturated hydrocarbons are the name given to alkenes and alkynes.

To know more about alkene visit:

https://brainly.com/question/29032376

#SPJ4

When ammonia is initially added to a solution containing Ni2+, solid nickel hydroxide, Ni(OH)2 is formed.

Ni2+ (aq) + 2 NH3 (aq) + 2 H2O (aq) → Ni(OH)2 (s) + 2 NH+4 (aq)

If more ammonia is added or if excess ammonia is now present in solution, Ni(OH)2 will be dissolved due to the formation of a violet-colored complex, [Ni(NH3)6]2+.

Ni(OH)2 (s) +6 NH3 (aq) → [Ni(NH3)6]2+ (aq)

The color of the solution is violet due to the formation of the nickel complex, hexaamminenickel(II).

What is Complex Compounds?

Coordination or Complex Compounds are addition compounds that are stable in a solid state. They are able to retain their identity even in solution. The central metal ion forms dative or coordinate bond with the ligands, which are species that surround the metal.

To learn more about Ammonia Visit here ; https://brainly.com/question/15409518?referrer=searchResults

#SPJ4

The smaller charges of the ions cause RbCl to have a higher melting point.

Which ionic compound has the highest melting point How do you know?

I The Ion Charge

In general, the higher the melting point, the stronger the ionic bond, the stronger the electrostatic attraction, and the higher the charge.

Why are ionic solids more flammable than covalent solids?

In ionic compounds, a strong electrostatic force holds the cation and anions together. The link that holds particles together and the attractive force that pulls them apart is known as the electrostatic force. The high melting point is a result of how challenging it is to separate the particles from one another.

To know more about melting point

visit:

https://brainly.com/question/28902417

#SPJ4